Have just upgraded to the new Oranage Rom 1.93, and have more problems than before
Unable to press the START key (Top Left Corner) and trhe "X" (Top Right Corner) with my finger any more, have to use the pen
Does any one know how to resolve and a newer or older Rom for Orange
Can any one help and have any ideas
Try re-aligning the screen, if that doesnt help, try a Hard Reset (you will loose everything tho, except whats on Internal Storage)
if still no joy
download again and flash....good luck
Does anyone have the link for the Orange Rom 1.93 as I have lost it
Or does any one have the Origanal HTC one and the Uplock file to install on Orange
u need Hard SPL for official HTC ROM, this and the HTC ROMs can be found in the stickies in this section of the forum
Related
Hello, Please Help
I,m an E-pat living in spain and got a new HTC Touch through my servise provider (Movistar), Of course it came with Spanish Windows Mobile, and I needed it in English, so I decided to flash it with an English-language ROM
Touch_Dual_WWE_2.01_2.20.707.1B_03.07.90 after i had sim and cid unlocked it first
Unfortunately I was not aware until it was too late that there are multiple different Touch models, and I obviously flashed an incompatible ROM . At first everything looked good, then I noticed that the phone rebooted every three minutes, and finally, having been switched off, it no longer will switch on. The orange led comes on for a few seconds, then disappears; a soft or hard reset produces the Movistar logo screen, then it switches off again.
I can put it into the bootloader tricolor screen by holding the camera button for a while; and i get the USB words appering in the bottom left of the screen, but i cannot activate activesycn to try and load a correct Rom. I have tried to load 3 elf Rom,s through the RUU without success.
Is there some way i can flash a WWE Rom or have i bricked my new phone ?
This is the origonal Rom
Rom version 2.20.621.1.esp
Radio 03.07.90
protocol 4.1.13.51
Ext 2.20.621.101
Devise 010050
Htc 304
Thanks Zomac
have you tried looking for the answer here
http://forum.xda-developers.com/forumdisplay.php?f=374
you may have to try flashing the original spanish rom if you can find it
On an athena the phone is not bricked if you can get into the tricolor bootloader,
but to flash a lot of roms the phone must be have another SPL loaded.
if you search the forum there are usually many people who have made the same mistake as you previously.
You can also use the search button to get your answer quicker , but there is a sticky that talks about a possible solution near the top of the quoted page
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
You can do thAT, on this way
Plug the USB cable to connect your Diamond with PC, make sure ActiveSync connected.
Copy "SSPL-Manual.exe" to Internal Storage on your Diamond.
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable. Your Diamond screen will turn "BLACK" and ActiveSync will disconnect. *This is normal behavior***
Execute the ROMUpdateUtility.exe.
Your Diamond will automatically restart when finished.
To make sure stock SPL has been flashed back, press and hold "Vol-" key and use stylus to press reset once. until you see the tricolor screen and if you can see version of spl which before you flashed, it's ok!
Greetz
sucro said:
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable.
Click to expand...
Click to collapse
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
when i want to install the original htc rom after received the upgrade present to 100 this error message appear .for this aim i need to downgrade my spl to stock. . is there any manual or howto link and also original spl files please link it. i have been searching for a while.
my stock spl was 1.93.
any help would be appreciated.
masa1977 said:
is there any manual or howto link and also original spl files please link it.
Click to expand...
Click to collapse
It's in the HardSPL Developer Edition Thread.
thanks a lot slow23
slow23 said:
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
Click to expand...
Click to collapse
You are welcome, try this, i discover this combination of buttons
ENTER+VOL UP = ALIGN SCREEN
that means, with this combinations of buttons, you can directly enter ALIGN SCREEN options, and try to align screen , sometimes this helped me, cause my touch screen has same problem, it start to freeze randomly, i don't know why, sometimes in right, sometimes in left corner, up-down, randomly, i noticed that htc diamond when is exposed , when i'm out and it's sunny weather, it stop to responding on touch, one my friend specialist for mobiles, tell me, maybe this happen, cause bellow screen in some pda is some thin rubber, and from heat it start to expand, and that cause problems, maybe this situation is in htc diamond...
greetz and good luck
Returning to Stock SPL
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
Hi
I have similar problem and I will tell you what I did to get back to Stock SPL.
1. Flash the BSBs latest ROM from this thread, http://forum.xda-developers.com/showthread.php?t=506533 . Either by RUU or moving the diaming.nbh to the storage, this ROM does not require allignment or any other input.
2. Install My Mobiler from http://mymobiler.com in your computer, where you can see your mobile screen in your computer and operate using your mouse.
3. Then return to the stock SPL as given in this thread http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39.
4. Flash your ROM again from the HTC. This can be done once the system connects to the phone.
I am successful in doing the above.
Regards,
V.Balaji
Hi,
I have my Diamond over a year and all was great till one day, suddenly it can't load the OS.
After power on, the black screen with "TOUCH Diamond" appear,
then it shows the radio version in red at the right bottom of the screen and from there nothing happen.
I tried to flash several ROMs & Radios, including the original ROM from HTC site but nothing.
The process of flashing seems to be fine and in fill all the 100% bar,
then it restart like during regular ROM flashing procedure but still no boot.
I tried to flash other hard-spl and still nothing.
I'm really lost and I hope someone has an idea for a solution.
Thanks
sorry if it's not the right place for this topic,
I also put it on general Diamond post so this one can be deleted.
MTTY?
Have You tried MTTY utility. Maybe it could help you.
Manual:
http://forum.xda-developers.com/showthread.php?t=540290
Hi Developers and users !
I have a HTC Desire from Denmark (Scandinavia).
I have tried to install a custom Rom on the phone which was successful.
After a few months i wanted to go back to the original ROM that it had, because some of the buttons suddently stoped working (Volume down, Menu button,home button). I made a giant mistake and didnt took a backup of my original HTS Desire Rom, so I therefore found a rom on this forum and installed it on my phone.
Afterwards i have had my phone to the repair center and they found out that my phone had condensation, so it couldnt be fixed.
After some months my buttons that didnt work start working again, but now it suddently restarts by itself and sometime when it restarts, it just freezes on the HTC Desire splash screen. After some time it starts up...
Sometime i have to start it via Power button + volume down button -> fastboot -> Reboot.
I think i have a problem with my socalled "original rom" that i have installed. maybe its not the right one to this phone, and thats why I am creating this threat.
I have attached two jpg. pictures of my fastboot screen.
The first picture shows my HBOOT fastboot menu.
The second shows that the fastboot menu has a error in it, when it loads. It says "No image" or "wrong image". Therefore I am 100 % shure that the rom is wrong and not the condensation thing. I have used my phone 4 months after i had it to the repair check without the biggest issues, but now it wont restart sometimes.
I think i maby is missing the right Radio for this model.
I have searched this Forum thin for the same problem, and i couldnt find anything, therefore i am writing this.
Can anyone help me with the right original Rom for my phone model ?
Phone model:
HTC Desire
If you need any other information please write it.
I hope you guys would help m find the right ROM for my phonemodel.
Best regards
Tokay_dk
I am interested in the answer to this, too. I recently purchased an HTC Desire that seems to have the WWE_Asia ROM on it. I would like to install a rom with the Danish language that will work in Denmark because I want to give it to a friend who lives in Denmark.
hi my htc touch pro 2 is stuck on the HTC screen with red number and letters at the bottom left
B 80
R 4.49.25.91
G 61.44etc.25.35U
D 2.07.80303
already done a soft reset and hard reset it works but then reboot non stop, ending to the HTC screen... i have no idea of flashing and stuff, can you pls guide me in a very noobish way.....thanks and more power to all
ive also done the bootscreen thing:
RHOD100 32M SS-BC
SPL-0.88.00
MicroP (LED) 0x0A
MicroP (KEY) 0x04
TURBOHW/TURBOSW
TP MFG DATA
510,524 802,846
812,203 216,201
222,853 Calibrated
Serial
pls help me......
slimmer22 said:
hi my htc touch pro 2 is stuck on the HTC screen with red number and letters at the bottom left
B 80
R 4.49.25.91
G 61.44etc.25.35U
D 2.07.80303
already done a soft reset and hard reset it works but then reboot non stop, ending to the HTC screen... i have no idea of flashing and stuff, can you pls guide me in a very noobish way.....thanks and more power to all
ive also done the bootscreen thing:
RHOD100 32M SS-BC
SPL-0.88.00
MicroP (LED) 0x0A
MicroP (KEY) 0x04
TURBOHW/TURBOSW
TP MFG DATA
510,524 802,846
812,203 216,201
222,853 Calibrated
Serial
pls help me......
Click to expand...
Click to collapse
I see you forget the HARDSPL , This is needed for flashing to an another ROM, you have a ROD100 so you need a hardspl for gsm, install that first and then flash it with a rom ; link to how to flash your phone : http://forum.xda-developers.com/showthread.php?t=550540 let me know if it worked.
how can i HARDSPL if my phone is freeze and cant sync??? where can i start? im very noob to flashing
i always get update error (error 626)
pla help me,im so sad....i have no mobile,and its only 1 month with me,i cannot return it because i bought it in norway and now im in asia now...pls help me huhuhuhuh!!!!
Hi
You can still flash the phone without sync.
Make sure you have a fully charged phone then
Try this -
Power off the phone.
Hold the Volume Down key, while still pressing the volume down key press the power on key.
This should bring the 4 color screen (red,green,blue,white) with the info you gave in your previous post. Its called the Bootloader Mode.
Now plug the phone into your pc - the pc will install some USB drivers.
The word USB should appear in the white part of the screen on the phone
Then flash HardSPL, wait for reboot.
After flashing HardSPL - go back to bootloader mode and flash your ROM
Good Luck!
I ALWAYS GET ERROR [626]: update error
I did a google and found this on PPCGEEKS
Verified rawdikrik's fix in post 370. Memory Card needs to be REMOVED for the unlocker to work. This should fix the 262 connection error
http://forum.ppcgeeks.com/cdma-tp-d...l-brought-you-cdma-raphael-elite-team-75.html
Try to flash without your SD card
sir im hardspl it w/o sim card and sd card and still get the same error....thanks!
I believe HardSPL will try to connect to the net. Please reinsert the SIM
Hey - if all else fails, you should flash a STOCK ROM (from HTC)
like this one RUU_Rhodium_S2_hTC_Asia_WWE_2.07.707.1_Radio_Rhodium_4.49.25.91_Signed_Ship.exe
here http://shipped-roms.com/index.php?category=windows mobile&model=Rhodium
i just want to throw it in the garbage can,but i have no money to spend for another mobile
pls help me im so desperate!!!
Sorry man! have you tried to flash back the ORIGINAL rom?
If you don't have an original rom to flash, you need to look for help here
http://forum.xda-developers.com/showthread.php?t=550131
thanks master,im downloading one right now ill keep you posted my htc pro 2 is in norwegian rom..can u pls check if im in the right path??? thanks
http://forum.xda-developers.com/showthread.php?t=570366
We wait & see
Will be back online in 12 hrs time
Now its the black screen with touch pro2 logo,but still freeze after i flash the stock rom....
flashed to stock rom...then hardspl and flash to titanium rom...everythings ok...but after 2 hours,went back to a never ending reset of the phone...did i do something wrong? or ill just flash it again and again?!?!?!?
woah! was about to celebrate for you ....
Did you install any apps?
nothing just installed titanium rom... do you think i have to flash it again???
Flash another rom
One of these 2 roms - verfy light and stock like
Simplicity
Kwbr