Need help with w800 - P3300, MDA Compact III General

Hi bought a W800 a few days ago and having problems apart from the normal bugd eg having to take the battery out after soft reset, I alos get error messages tons of them saying sort cut not found then the volume bar appears then tunes off the volume then tomtom starts up , all this when I try to call, I have put it back to defalts soft booted but still does it not all the time, just cannot use the phone what id working is SMS GPS and external GPS, anyone got any ideas I like the look of the phone but at the moment its is useles thanking you for your time in this matter.
Nick789uk

Related

Power off problem with my new 9090

Hello.
Yesterday I bought a new Qtek 9090.
Since I was charging it yesterday all day long I didnt found a problem till today.
When the device is on or in the cradle there are no problems -everything works fine but
when my QTEK automatically powers itself -off after 3 min, I cant turn it on again except with Hard reset - with that I lose all my data and I must one more time calibrate screen, set date... I tried to install Windows one more time but it doesnt help. Same problem.
I also cant recive any calls when device is off - although it doesnt seem to be busy from the caller view - but on my QTEK the screen doesnt turn on, it is off all the time...until I make hard reset. No other button helps.
Are there any hidden settings?
I am working on this matter whole day and I cant find anything.
Before I bought the PDA I read somewhere that you cant turn the device off - unless removing a battery - well mine turns itself of just by pressing power button on top. But after that I cant turn it on again - only hard reset helps. But when I turn off automatic shut down after 3 min - the battery lasts only for a few hours - and it is a bit unpractical to charge your phone every few hours.
Please help with you knowledge and experience!
superbit said:
Hello.
Yesterday I bought a new Qtek 9090.
Since I was charging it yesterday all day long I didnt found a problem till today.
When the device is on or in the cradle there are no problems -everything works fine but
when my QTEK automatically powers itself -off after 3 min, I cant turn it on again except with Hard reset - with that I lose all my data and I must one more time calibrate screen, set date... I tried to install Windows one more time but it doesnt help. Same problem.
I also cant recive any calls when device is off - although it doesnt seem to be busy from the caller view - but on my QTEK the screen doesnt turn on, it is off all the time...until I make hard reset. No other button helps.
Are there any hidden settings?
I am working on this matter whole day and I cant find anything.
Before I bought the PDA I read somewhere that you cant turn the device off - unless removing a battery - well mine turns itself of just by pressing power button on top. But after that I cant turn it on again - only hard reset helps. But when I turn off automatic shut down after 3 min - the battery lasts only for a few hours - and it is a bit unpractical to charge your phone every few hours.
Please help with you knowledge and experience!
Click to expand...
Click to collapse
If you brought it new, perhaps you should take it back as being faulty..?
I bought it via Ebay and I tought I will ask for advice here for beginig. Than if that will not help I will contact the dealer.

Accepting call resets SPVM2000 (Blue Angel)

My phone some times hard resets when I accept an incoming call and goes back to factory defaults,,, with screen align as startup. It is so annoying as it looses all the information. Have to start every thing from scratch,, will appreciate help/support if some one else has come accross something like this ?
well, I had the same problem. It's ofcourse a hardware problem. Now I've upgraded to WM5 and since it keeps permamnent storage, the only things I've got to set after hard reseting are time and date. Life is aloooooot better now

Phone Sound Problem?...

I have a problem with my O2 XDA IIs, the sound works perfectly for playing MP3's etc both on the internal speaker and on the external plugin headset!
Where's the problem? I hear you asking!
Well, the sound does not work at all when in a call, the caller can not hear me and I can not hear them, although the call is connected OK. The only time I can hear the caller or be heard is if I plug in a sync cable or put the device in the sync station, at that point it works ok when in a call. I belive this to be a power requirement as it also works when I plug in the car charger?
Does anyone have any ideas what could be causing this problem, it has only been occuring for the last few days and I have not changed anything during this time which could have caused the problem... I know that's what they all say, but it's true this time!!!
Have you tried getting rid of unusual programs running in background? (Try 'Startup Manager' to take off some startup programs) or wait until any expert put a word on it.
There are only 2 entries starting and they are both the same as they have always been, the problem does appear to be quite random, as though every time I remove the sync cable something either happens or does not happen??
Does anyone know if there are any switches or anything attached to the sync connector on the phone which might be causing the problem?
I had a problem not unlike what you describe. It started after the battery ran very low on the phone while I was away from home.
The Phone would only work while in the cradle, and wouldn't work when out. The Speaker Phone function disappeared also.
I re-flashed the ROM.
I downgraded the ROM.
Re-formatted the storage card.
Took the Phone apart looking for a switch that might be stuck.
All to no avail.
Contacted Qtek who wanted me to return the phone.
So I tried one last thing before I gave up.
I left the phone with the Battery attached to run down again. (I left it for about a week)
re-charged the phone and its been fine ever since.
The conclusion I came too was it is a software register on the phone that was corrupted and the total drain of power cleared it.
When you ran the battery totally flat did this not clear all the stored data and installed apps etc? Only I'd rather not do that if I can avoid it?
Couldnt tell you sorry, I had already lost all data/apps with the reflash/formating.
No worries, if you hear or find anything elsewhere about this problem please let me know as this is getting very very annoying now!!!
Patch
Hi guys
This is a tipical problem of the BA. I had the same problem at the begining. This are the steps to solve it:
1. Backup your data (only contacts & meetings)
2. Hard reset of the device (press micro + On/Off button + reset)
3. Install the "PDA2k_UniDirectional_Patch.sa.cab" patch
4. Do not restore a whole backup (you will have the same problem again)
So it would be work fine. If you upgrade to the lastest ROM you will get this bug fixed too.
Good luck!
Hi i have the same problem and try a diferent approach.
Upgrade radio to version 1.15.
Problem appear to be solved.
I upgrade the rom yesterday, once i have change the board, and downgrade the rom.
What is this "PDA2k_UniDirectional_Patch.sa.cab" and what does it do exactly? As I'm already using the Radio 1.15.00.
Sound Patch
This file fixes the problem when you do not listen to the person who has called you.
You can download it from:
http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab

Phone will not come out of standby

hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
no one seen this then I guess.
Bummer (for me!)
Try hard reset
sickboy555 said:
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
Click to expand...
Click to collapse
Try hard reset
softreset helps, sometimes i have the problem with windows mobile 5 too
jmermel said:
Try hard reset
Click to expand...
Click to collapse
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Hard reset
sickboy555 said:
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Click to expand...
Click to collapse
You might have loaded a program that is not liked. Use a backup program. If this does not work then load your backup after the hard reset and you will be back to where you started
P3600 with D810 WM6 ROM; also happens occasionally, recovered with soft reset. Seems to happen most often when I press the On/Off button twice too quickly.
thanks guys.
I'm going to try the hard reset route-I'll report back.
Some time ago this happened to me so often, but said it was due to some application, in my case was Slide2Unlock.
Since I removed by their consumption of memory it didn't happened to me.
(Sorry for my english)
Bugger, this has started to happen to me as well. Only 3 times in the last 3 days but if it keeps is up that will be enough for me to do a hard reset (overdue). Strange cause the only new thing I put on in the last week has been PCM 16 which is only a copy/paste exercise.
The fix in the Hermes forum is to force your device to sleep and not let it go into standby.
I have had some problems recently with DeviceLock 1.2 just ceasing to work and have to uninstall/reinstall to make it work again. I set it to turn the screen off when locked, as this does not put the device on standby, maybe there is the same issue with it going into standby by itself.
I have the same problem..i think that it has to do with the phone hanging..most probably due to some background programs eating too much power and memory and the phone just lacks till it hangs..happens when you have other programs that have hanged as well..my problem is with PocketAlarm..it takes so long to load my phone went to standby and the phone couldnt be called back..in brief the phone just hangs because of a program..i don think it has any problem do to with the hardware or strictly the OS..cant really explain..but the role the OS play in this problem is that it allows the program to make full use of the phone till the phone cant cope with it..its the core of the OS so it cant be avoided with any other versions or anything..sorry it seems rather unclear..hope you guys understand..
same problem for me ... from times to times, when a call hang up, i push a lot of times the red button for going back to the today screen and as it shows up, i click immediately on the Power button for turning off the screen. right after when i forgot to do something (approx 1sec) i push the power button and there it doesn't turn on the screen ... strange ...
what i've installed on it :
TomTom 6
BatteryStatus with today plugin ver 1.04.203 beta4 i put tray icons too.
i've bluezard for sniffing and/or hacking bluetooth devices.
OBDgauge too it's a software that works with a bluetooth dongle i plug into the diag port of my car.
and that's all. ah yes one more thing -> i disable the "HTC Home" because i don't like it.
Same problem here...
Still no solution?
I got this problem from some version of rom by Karmba. But V7.2 is OK so far. It seems happened when I close Egress reader by click X button then turn off screen by power switch. It then would not wakeup again. But if I close Egress and check the running programs from Task Manager to make sure the Egress is not running at the background, then I can turn on or off the screen freely.
So I think this wakeup problem is caused by some running program that was not closed properly by X button then crash the WM.
That was just my personal finding. Hope it help you guys a bit.

Freezing problem

I guys,
A friend of mine has some troubles with is Arthemis (SPVM650 in fact).
He buys it on ebay (used but barely new) and since he has it, the PPC is freezing...
At the begining it was on WM5 orange ROM, I installed tomtom and other stuffs and the mobile was freezing time to time, freezing when receiving an SMS, freezing when receiving a call...
When it freeze and you reboot it by reset boutton or removing the batterie, it doesn't reboot for sure... it can freeze again
So I decided to install a WM6.1 Release_Aje_fr_3.00Beta3_Nini to get reed of this creepy system
http://forum.xda-developers.com/archive/index.php/t-316411.html
So everything works fine but the mobile still freeze again and again
Sometime it's on boot (when the mobile gets on today screen) sometime its 10 seconds later...
Sometime you can use it but the phone won't ring or you get some strange characters (like â or ä or ê or ë...)
When it freeze, you can't use the touchscreen or the buttons anymore but pushing the buttons light them and the screen follow time procedure (shutting backlight or go asleep) and pushing the power button allow you to get the dialog box and shut the ppc down
I try to boot without storage card and sim card with the same result...
So I am out of ideas and a little bit upset because I advice my buddy to take a WM phone and he's stuck with this sh***
If any of you has an idea of what to do it will be muchly appreciated
Freezing and Blanking problem
I had the same kind of problem with phone freezing several reboots daily and sometimes the phone doesn't turn on even when battery removed and so on very frustrating I can tell you. But their is hope as I spent time reading through lots of threads in here and what worked for me was openning the phone up to the mother board and cleaning it with some form of electronic pressurized cleaner.
Believe it or not my phone has been working fine now, you will need to read a manual on opening the phone, I have the Xda Orbit.
Thank you for the tip...
I already try to open this damned phone because my buddy drop the phone and the housing is a little bit damaged but it is different from the first problem (the phone was already freezing).
So I buy a housing on ebay, its very chip but the price too so I try to remove the old housing following some pdf I found but i Have some piece at the right of the screen, under the housing (at the middle of the phone) which prevent me to remove the top housing... so I got stuck, I had to mount everything back before getting to the motherboard...
The piece bloking me is some black plastic peak which seems to go from te top housing to the motherboard or something like that.. it's not reference on the pdf I found...
So I am willing to try the cleaning spray (I got some at work) and perhaps going back to a genuine HTC rom just to be sure... and If it don't goes anywhere... I wille become friendless

Categories

Resources