Dont know why but there is a problem with my phone and i cant figure it out. Most of the time i can dial out , but there are instances where i begin to dial out, and im just waiting, and i try to end call but i cant. The phone does NOT hang or freeze, i can still go through tabs, but if i got to the call page, its still hung uo on that last call i cannot end. Hope this makes sense. Im using Dutty`s Newest rom with 2.03, tried other roms and same turnout. Hope someone can help!
Please provide detail ...
WHen did it last work fine and back step to trace what u did that might have caused a change.
Example:
• flash new rom or radio
• flash system with Hard SPL
Im using HardSpl Olinex 1.4
1.09.25.23 Radio
Dutty V4
I think its happened after my provider gave me free internet or when i went from 1.93 to 2.+ roms.
the only sw i have is tomtom and musicId.
This is really ticking me off
When u flashed your rom, did u do a Hard Reset?
if you didn't hard-reset your phone after flashing a new ROM there tends to be minor bugs..
i just had to hard-reset my phone again after trying on different radios.. it freezes my phone whenever i hit volumn button. After the hard-reset.. everything is fine now
I'm really sorry if this has been answered before in any of the threads but I'm having a very peculiar problem. After a day or two of flashing any ROM(Energy ROM, Gen Y,etc, etc.) the network bars shows no service. Whereas at the same time if I call on my number it rings but I can not answer the phone neither can I see who's calling and I can't access the Call History as well.
I use Radio 1.00.25.05.
I know some of you'll might ask me to post in the ROM-related thread but this is happening since a month now I suppose with every ROM I've tried.
By the way I'm currently on Energy ROM, the latest build.
P.S : The only third party software installed was SpbBackup and S2U2.
Can someone please help me out.!
Try loading your stock rom once
Don't forget to hard reset the device after every Rom Flash.
Well I do hard reset after every flash and also everytime the problem starts I hard reset and it goes away. @nagasai : I will load the stock ROM and try it once. Any more advice anyone can pass on.?
You already have Hardspl, but try a different one (1.40 Olinex works fine for me)
Flash a COMPLETE stock rom (including Radio), see if the problem persists, check if you've also changed the radio (from the one you have now).
Purists would tell you to do one of these things at a time... to find out what was causing it.
I say that if you want to solve it... just do it all at the same time (well... by the correct order ofc... ).
Hope it works...
good Luck
Hello. I have a problem with sound in my kaiser with Android. I tried 2 systems [Cynanogen mod 6 (Froyo) and Myn's Warm Donut], 4 radios (from 1.71 to 1.65) and 2 kernels. Sound never appeared. Why?
what zimage or nbh you using if you are using a older one it might have problems
Did you mean kernel? the newest from this page:
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
it may be that you have muted the media volume in settings.
No. I don't have any sound. Not only media. When someone calls to me, I cannot hear him too and this person cant hear me too.
Audio issue
I have the same problem. I tried different builds and nothing helps. Any suggestions??
Just a thought, but have you tried flashing a stock rom, then flashing to nand again? Flashing a stock rom clears the entire nand, leaving no possibility of stray bits of data left from custom roms.
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
<refresh>.
Mu_aawiyah said:
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
Click to expand...
Click to collapse
Yeah, flashed it back to a the most recent stock rom, and then back to andriod.. how works perfectly. Sorry i didnt tell you guys earlier.
I think it was to do with the radio thingy-ma-jig. I flashed it with winmo 6.1 from htc website, and then back again.
Now i'm runnying frayo.
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Wagierek said:
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Click to expand...
Click to collapse
That is most likely because you didnt flash it right. take the .nhb from it, plug it into your sd card and flash it from sd. try that.
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Wagierek said:
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Click to expand...
Click to collapse
Well, with regards to how I got it fixed (the detailed explanation), i flashed it with a custom winmob rom initially, but surprisingly, the same problem i had with android was happening with the winmob. I could make a call after reboot, but after that call, the sound completely died, and the camera did not work. So i tried to flash with the latest stock rom. I've uploaded the actual roms i used on my public drop box folder here => "i tried posting the link, but because i'm new, it wouldnt allow me...pm me"
I am not a professional on flashing, rather i am a beginner. My tytn 2 is a european T-mobile version. I tried to flash it, it did it half way...then stopped! I tried to do it again, but then it just said "...loading..." and would not go past it. But when i booted to my custom rom, it was still there, but the problems had gone. I guessed that it flashed the radio, and nothing else.
When i then went to android, it worked perfectly.
That was my journey.
I hope that helped... maybe.
Unfortunately, it didn't help.
Any other ideas?
I solved mine by changing radio ROM,but i lost sound and camera in windows,any ROM that fit both android and windows???
What version did you flash?
1.65.14.06
Me too!
I flahsed froyo last night and didn't test after makng calls. I'm having the same issue (lose sound after a phone call). I followed the sticky guide and sim unlocked the radio before flashing (which I think I had already done before). I will try changing radios when I get home to see if this resolves the issue and post my results.
Update: I flashed 1.71.09.01 on my ATT Tilt and this fixed the issue. Now sound and camera work great. Phone runs faster also!
Hi guys,
Im currently using the MIUI xj roms... everything is working alright except i cant received calls... whenever some one calls me it automatically rejects it .. Can some one help me out with this ..i been thru the settings and all and i cant seems to solve the problem..
Thanks in advance.
Have you flashed with Clockworkmod?
If so, boot into recovery mode first do a backup and then try to do a full wipe.
Or put CyanogenMod on it, I like that one much more then the MIUI.
Good Luck!
There is a "privacy"/"DND mode" toggle somewhere in MIUI that does exactly what you are describing. Sorry I can't be more precise, but I don't have MIUI at the moment - I just remember fiddling around with that setting a while ago, and it worked like that.
I installed Mıiu rom on my desire. it is awesome but i have problem. When i charge phone, touch screen doesn't work. i cant do anything. i even can't answer incoming calls. What can i do? i like this rom but it is a headache problem.
problem solved
thanks