hi
a want to flash an hardspl into my phone to flash any rom possible
now i have:
isp 2.21.0002
spl 2.21.0000 /G3
i.e Hard-SPL-V7.zip but it does not work on my phone i try several times also with other hardspl
the only one that i can flash is the ELF_USPL-v1 then my spl change to 1.11.0000 and ipl remain the same 2.21.0002 after flashing i.e Artemis Touch 3.01 full my phone stuck in splash screen with OS:3.7.0.0 and i have to reflash the riginal rom
how can i change my isp and spl to 2.10 ? please help...thanks
problem solved. needed a other kind off radio
how i know is have unsigned hardspl?
i have this
HardSPL 1.40 is signed or unsigned
this appears to be olinex unsigned 1.40
searching would of answered your question but sackbauer is absolutely correct in response.
Hi to all , I found a new release of 2.03 rom for Israel , but they said that the rom can be flashed only if you bought the phone from them and when flashing it checks the IMEI number .
I tried to flash it and it gave me an error, so I went back to the old rom .
Is there someone who can help with getting out this IMEI check from the rom?
The link for this rom: http://rapidshare.com/files/201931770/RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
it doesn't check the IMEI but the CID (carrier ID) of the device.
You can do 2 things:
You can superCID it (giving it an master CID) so you can flash all OFFICIAL(only official) diamond ROMs.
This can be done with the olinex unlocker.
Or
You can flash the Hard SPL, which allows you to flash any diamond ROM to your device.
There is a sticky presenting several Hard-SPL versions.
Good luck and have fun.
I have Olinex SPL 1.40
do I need something else?
you'd need an unsigned H-SPL to flash the official ROM (is the version you are using signed or unsigned?)
Unsigned Hard SPL Diamond OliNex
in the bootloader it shows the following:
Security Unlocked
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Now it shouldn't be any problem to flash the WWE-ME ROM.
Try flashing it from internal storage (diamimg.nbh method)
Good luck,
EqX
I tried to flash it with the RUU and it gave me an error ,
do you think that if I'll flash it from the internal storage it would be ok?
P.S.
I tried to flash with RUU after I flashed the Unsigned Hard-SPL.
The ruu doesn't play nice..
unzip the exe
the big signed.nbh file is your image.
Then follow the instructions on:
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Regards,
EquinoXe
Thanks , it worked.
You're welcome.
Regards,
EqX
Hello,
did anyone successfully flashed HardSPL to a excalibur device with SPL 1.18
Also SDA Application Unlock is not working -> application crashes...
Thanks for your help!