O2 XDA Nova GER - Upgrading, Modifying and Unlocking

hi
a want to flash an hardspl into my phone to flash any rom possible
now i have:
isp 2.21.0002
spl 2.21.0000 /G3
i.e Hard-SPL-V7.zip but it does not work on my phone i try several times also with other hardspl
the only one that i can flash is the ELF_USPL-v1 then my spl change to 1.11.0000 and ipl remain the same 2.21.0002 after flashing i.e Artemis Touch 3.01 full my phone stuck in splash screen with OS:3.7.0.0 and i have to reflash the riginal rom
how can i change my isp and spl to 2.10 ? please help...thanks

Related

help me My M600 start screen freez

i flashing my m600 with PDAMobiz_Prophet_WM6_V1.00_Step1 after i putit on the screen freez at start up with this
ipl:2.10.0001
spl:2.10.0001
gsm:02.07.20
os:10.2.0.8
i need help seriusly
thinks
i tried installing wm6 PDAMobiz_Prophet_WM6_V1.00...but now it is stopped at the screen with ipl spl
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 10.2.0.8
Probably my error was a notification that poped up while flashing
can'i recuper my pda
U load HTC Prophet rom on Eten M600???

need help! after flashing htc touch doesn't wake up

need help! after flashing htc touch doesn't wake up!
ipl 2.21.0002
spl 1.11.0000
londondrug said:
need help! after flashing htc touch doesn't wake up!
ipl 2.21.0002
spl 1.11.0000
Click to expand...
Click to collapse
PUT IN BOOT: POWER+CAMERA+STYLUS IN SOFT RESET
AFTER FLASH ROM ELFIN 2.XX ORIGINAL

Hard-SPL from 1.40 to 1.37

When I started to play with unsigned roms, I flashed Olinex 1.40 HSPL. My device ROM's from factory was 1.37.
I am encountering some problem with blurry screens and that's the reason for which I want to flash Olinex 1.37 HSPL. I tried to flash 1.37 HSPL over 1.40HSPL with no success, because the version indicated at soft-reset is still 1.40. What is the right procedure?

Problem with new rom for Israel

Hi to all , I found a new release of 2.03 rom for Israel , but they said that the rom can be flashed only if you bought the phone from them and when flashing it checks the IMEI number .
I tried to flash it and it gave me an error, so I went back to the old rom .
Is there someone who can help with getting out this IMEI check from the rom?
The link for this rom: http://rapidshare.com/files/201931770/RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
it doesn't check the IMEI but the CID (carrier ID) of the device.
You can do 2 things:
You can superCID it (giving it an master CID) so you can flash all OFFICIAL(only official) diamond ROMs.
This can be done with the olinex unlocker.
Or
You can flash the Hard SPL, which allows you to flash any diamond ROM to your device.
There is a sticky presenting several Hard-SPL versions.
Good luck and have fun.
I have Olinex SPL 1.40
do I need something else?
you'd need an unsigned H-SPL to flash the official ROM (is the version you are using signed or unsigned?)
Unsigned Hard SPL Diamond OliNex
in the bootloader it shows the following:
Security Unlocked
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Now it shouldn't be any problem to flash the WWE-ME ROM.
Try flashing it from internal storage (diamimg.nbh method)
Good luck,
EqX
I tried to flash it with the RUU and it gave me an error ,
do you think that if I'll flash it from the internal storage it would be ok?
P.S.
I tried to flash with RUU after I flashed the Unsigned Hard-SPL.
The ruu doesn't play nice..
unzip the exe
the big signed.nbh file is your image.
Then follow the instructions on:
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Regards,
EquinoXe
Thanks , it worked.
You're welcome.
Regards,
EqX

HardSPL for SPL 1.18

Hello,
did anyone successfully flashed HardSPL to a excalibur device with SPL 1.18
Also SDA Application Unlock is not working -> application crashes...
Thanks for your help!

Categories

Resources