Related
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Click to expand...
Click to collapse
Bet we don't see a JasJam Telstra tho'....
gomax said:
Bet we don't see a JasJam Telstra tho'....
Click to expand...
Click to collapse
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
I suspect we will never see a JasJam ROM as imate have dropped HTC as a supplier. I doubt they will got to the trouble of providing WM6 and Telstra won't do it on their own.
The original Dopod SEA WWE works great and also automatically sets up Telstra's settings. It also has the bonus of not being carrier branded and pleasingly less green than the HTC ROM.
Thanks a Million Guys.
I am sure I-mate will never have an update for JasJam especially with a WM-6 ROM.
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
So NextG is a definite go with this rom? Should I see an H in the menu or just 3G??
Greg
I just have the 3G icon to start off with, then it goes to H when i start up the data connection.
Only thing i had to do to get it going was set network type to WCDMA
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
http://www.imate.com/support/PPC_OP_Settings/Australia_Telstra.CAB
drgmt said:
Hi Guys.
Here is the way to get "everything telstra" working on your black dymond.
Step one
Install the attached telstra my place cab. Then proceed as follows....
Under connections select new connection.
Name it Telstra Internet
Click the modem tab. Click new.
Name the connection Telstra Internet
Select a Modem (GPRS, 3G)
access point name telstra.wap
Click finish
Set proxy to 10.1.1.181 port 80
HTTP should be 10.1.1.181:80
Then open telstra my place icon and navigate to foxtel. This should work.
Note to access non telstra sites you might need to disable proxy in my connections
Hope this works guys. pm if any trouble.
drgmt
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/124404-post8.html
I flashed this ROM on my Telstra i-mate Jasjam (though I use Optus) . Works great! Network Wizard automatically set up all Optus settings. Now get 3G and HSPDA speeds and MMS settings all work! Thanks to all for sharing their insights and making our devices better than ever!
new official (really official) ROM!
AT&T just released their official WM6 ROM. I won't be able to load it until tomorrow. If anyone does, please post here if it's any better than the original "official" ROM.
http://www.america.htc.com/support/8525/software-downloads.html
Imate Telstra Rom Windows Mobile
Hi spoke to a support person about a week ago and he reconed a new rom was coming for Telstra customers for Mobile 6
Hi all
Sorry if this question might sound silly but i am new to this.
I have recentley aquired a imate jasjam:
ROM version; 1.31.305.2
ROM date; 09/08/06
Radio version; 1.20.31.10
Protocol version; 32.52.7020.00H
ExtROM version; 1.31.305.103
now this is set to telstra settings
I however have a three network and dont know the setting to set it to work with three network. when i rang 3 support they told me i need to get the dopod pro which works on their network.
I though the dopod pro and imate jasjam where the same phone but they tried to convince me it is different and advised me of not trying to put dopod software on jasjam as it might lock the phone.
So now i am totally confused
Do i update my imate with the WM-6 ROM from above link? if so how...
thnx in advance for any help
Official imate WM6
Here is a link to the official release of the imate WM6 release for the Jasjam: http://clubimate.com/jasjamsupport/JASJAMAU.html
You can then configure your settings for any operator after that. And you are right - the 838pro and jasjam are the same!
I would recommend flashing the Dopod rom or a Schaps rom. These have Network wizard which will setup all your settings. I am on 3 also and use Schaps rom. Works perfectly.
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
shaker22a said:
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
Click to expand...
Click to collapse
Follow the guides available and you won't go wrong.
It was daunting at 1st for me, but after you'v done it once it's easy!
There is a Telstra WM6 rom
I'm a bit confused by some of the comments above. There is a Telstra WM6 rom available on the Club iMate site. I had downloaded and installed it successfully but unfortunately it is not supported by BB Connect 4.0.0.9x so I went back to the Dopod Asia build.
Another update from 3Aus - 6 months old, but not listed anywhere?
Strangely, I can't see any mention in the forums of the 3Aus 838pro update available from 3... They mention version 1.30.707.8, which looks like it's supposed to be newer than the one mentioned above (which ends in .707.4)... It's been available for a while, and I don't know how it compares with some of the cooked ROMs available.
http://www.three.com.au/Dopod (Select 838pro from the dropdown, then "Planet 3 software upgrade" link, then another "Planet 3 software upgrade" link... Page contains download and install instructions, and some )
Direct link to download: http://203.210.124.136/3/software/Dopod_838_Pro_p3.exe
Supposedly, according to an sms I got maybe 6 months ago, this update is supposed to enable streaming content on Planet3. I haven't tried it yet, but will be doing so in the next few days. Has anyone else had a look at this? It's not listed in the wiki either, as far as I can see... (I'm about to try it out because of not being able to get Planet 3 streaming under WM6.1...)
Edit: Never mind, this is a WM5 update. We don't have it listed anywhere, though, so I'll add in some details about it...
ROM Version 1.30.707.8 Date 12/13/06
Radio: 1.27.30.10
Protocol: 32.60.7020.06H
SPL: 1.09
IPL: 1.01
It does have streaming under Planet 3 working, though. I'll try to figure out how it works.
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Click to expand...
Click to collapse
Hi there,
Total noob here. My dopod is running windows mobile 5 - will this rom upgrade my OS to version 6?
Thanks in advance
This link is not working, is there any other linkwhere i can download
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4. Currently i have 3.54.707.3 Aus Hutchison - 3 Network ROM.
Can any one send me the link to download.
What is the best Radio for european user with WM6?
there is no one answer - because in europe there are many operators - some have had problems with some Radios while other work fine with them.
Only thing - try them yourself and stick with the one that works best for you
Hi @all
an answare ther is, my be mar_60 would like to know which is the best radio rom in italy or in the country where he lives. So if mar_60 lives in italy many italian user can answare to him.
In my opinion, 1.46.00.11 or 1.50.08.11 have the same performances.
dormone said:
Hi @all
an answare ther is, my be mar_60 would like to know which is the best radio rom in italy or in the country where he lives. So if mar_60 lives in italy many italian user can answare to him.
In my opinion, 1.46.00.11 or 1.50.08.11 have the same performances.
Click to expand...
Click to collapse
The answer is that mar_60 wants to know which radio will perform best for his GPS, GSM etc in the region of Italy that he uses his phone in most (does he use EDGE / HSPDA etc - it's available in Roma - but where he lives? Does he use GPS? I don't know and don't think you do either) for the ROM he has installed (Lasagna) with the TIM operator.
See not simple.
Yes - and if you look in the thread for 1.50.08.11 you'll see plenty of people disagree with you - and have lots of problems with this radio.
Also - it depends on the frequency used by your operator. (There are several operators in each country - and they use different GMS norms. What use to be PCM1800 (now GSM 1800) - I believe is used by Bouygues in France whereas GSM 900 is used by SFR and Orange in France. Bouygues for example has big problems with 1.46 and 1.50 radios - but SFR works great with the radio 1.46 - but not with 1.50.
His question - comes despit the fact that he has 1.50 installed (signature) - so his opinion may differ from yours based on his experiences.
Then you've got the ROM version used which comes into play aw well.
So it's really not as simple as you suggest.
However - what is simple (does not require reinstalling ROM, software or data) is flashing different Radio ROMS. Which is why I say try before you buy and see which is the best for your ROM with TIM in Italia. Capisca?
sorry, i'm on SFR network and i have Rom radio 1.50 and no problem appear ^^
1.50 works great
I´ve radio 1.50 and works perfektly in T-Mobile site in czech, slovak, deutch, austria ...
beitlj said:
I´ve radio 1.50 and works perfektly in T-Mobile site in czech, slovak, deutch, austria ...
Click to expand...
Click to collapse
same here in the USA
tamsomlao said:
sorry, i'm on SFR network and i have Rom radio 1.50 and no problem appear ^^
Click to expand...
Click to collapse
Yes, I should have been clearer - this just goes to illustrate my point that what you use the Trinity for, what ROM you have and what you network use and coverage is makes a lot of difference.
mar_60 said:
What is the best Radio for european user with WM6?
Click to expand...
Click to collapse
Like says nealed , in my opinion the only way for solving your doubt is try 1.46 and 1.50.
Personally i use 1.50.08.11 with lasagna rom , but onestly i can't say yet that is better then 1.46.30.11 or 1.46.00.11.
Ciao
Imdantes
Hi all,
I have a telstra locked diamond and have changed to vodafone here in australia - the htc site won't let me download the vodafone rom, so i was wondering if anyone can either supply me with the latest vodafone rom, or the direct link to download it from htc.
Any help would be greatly appreciated as i can't use vodafone data connections as the phone is locked to use the telstra network for data.
thanks in advance,
paul
Paul, I think any other ROM (custom included) will work fine, the data will be reconfigured automatically. I'm using SwiftBL 7.5 and the first time it starts, it auto-configured data and MMS for me for Optus.
thanks
Thanks for that - have got that rom installed, but had problems with the hard-spl...
Anyway - it works.
Cheers.
Mind You...
I'm having a few problem with that rom - so if anyone can either supply a link, or a phone serial number that will allow the download it would be much appreciated.
Which ROM are you having trouble with?
SwiftBL 7.5
OEM 1.96 WWE
SORRY DIDNT READ ENOUGH !! i thought AU !! but you are in AUStralia so i was mislead. sorry again
greets
Neutron83 said:
SORRY DIDNT READ ENOUGH !! i thought AU !! but you are in AUStralia so i was mislead. sorry again
greets
Click to expand...
Click to collapse
Well:
Australia = AU
Austria = AT
Was using Switft, then tried dutty 3.2...
Strange, everytime I soft-reset some registry settings change back, like the keyboard setting and show SIM numbers. Also, don't seem to be able to get any satellites in gps...
I emailed htc support and they seem unwilling to give me the link to the vodafone rom.
Guess I'll just play around until I get angry enough to try percussive maintenance with a half-pound sledge hammer...
there are new vodafone stock roms, on xda, strange you didn't saw them
Hmm - I must be blind...
I did find the latest stock rom for AU which seems to be running just fine...
Happy now...
Thanks everybody.
Woops - I thought that you would have had problems with the frequency change from Telstra to Vodafone?
My radio notes say:
USA + Telstra: 850/2100 MHz DIAM130
Europe + Vodafone & Optus: 900/2100 MHz DIAM100, DIAM110, DIAM200, DIAM300
D100 on TLS will use HSDPA in city OK (2100) but reverts to slow EDGE in country (stays on 2100 not fast 850 Next G)
G=GPRS
E=EDGE
H=HSDPA
3G= WCDMA/UMTS
paulkorosi said:
Hmm - I must be blind...
I did find the latest stock rom for AU which seems to be running just fine...
Happy now...
Thanks everybody.
Click to expand...
Click to collapse
Which rom is that? I've just installed Olinex HardSPL 1.30 Signed and was looking for a stock 1.93 based rom to use in AU with Three.
I am looking for a stock rom in australia as well. I have not found any Aus stock roms out there. Maybe it is just a generic stock rom that works all around the world.
I would even be happy with a 3 Australia rom but i cannot seem to find that yet.
Cheers
Darren
how to update htc touch diamond (verizion) 6.1 to 6.5 .....help me please
Its no difference then flashing a 6.1 rom
Söderström said:
Its no difference then flashing a 6.1 rom
Click to expand...
Click to collapse
Wow that must have helped him alot.
classico_007 said:
how to update htc touch diamond (verizion) 6.1 to 6.5 .....help me please
Click to expand...
Click to collapse
Next time please use search.. Or at least read the sticky threads.
http://forum.xda-developers.com/showthread.php?t=416211
It depends whether your phone is GSM or CDMA. I don't know what Verizon is at the moment, I think they are CDMA but check that before doing anything. The above tutorial is for GSM versions so if your phone is CDMA please don't flash anything from that tutorial just read it to get a basic idea of what you should do.
You basically need a hardSPL flashed which is explained in the tutorial. After that, you can basically flash any ROM you like as long as you flash GSM ROM's if your phone is GSM or CDMA ROM's if your phone is CDMA.
i have e htc touch diamond GSM Version Rom 1.93.422.4 radio version 1.00.25.08 4gb internal storage bought in usa and now I use it in Europe (Albania). I saw on the page the aplications but appear to be older than i have actually. a I tried to update rom from htc.com but apparently the serial number is wrong .....
i have e htc touch diamond GSM Version Rom 1.93.422.4 radio version 1.00.25.08 4gb internal storage bought in usa and now I use it in Europe (Albania). I saw on the page the aplications but appear to be older than i have actually. a I tried to update rom from htc.com but apparently the serial number is wrong .....
classico_007 said:
i have e htc touch diamond GSM Version Rom 1.93.422.4 radio version 1.00.25.08 4gb internal storage bought in usa and now I use it in Europe (Albania). I saw on the page the aplications but appear to be older than i have actually. a I tried to update rom from htc.com but apparently the serial number is wrong .....
Click to expand...
Click to collapse
HTC won't let you download ROM updates from their site if you have a network-branded (ie, Orange, Vodafone) Diamond. For official ROM updates you need to check your phone network's web site.
is there anyway i could install an english language pack into my touch diamond 2 without i have to brake and flash it with a full flash??
I need to change the language to english from swedish but i would still like to keep the swedish language just incase....like on other multilanguage phones
I have essentially bad luck buying these phones. On my blackstone, i was able to work around it using USPL. Now, the rhodium i have, it's S/N doesn't work on any of the HTC download pages
i need help with diffusing the bootloader screen. What should i use to upgrade this phone to WM 6.5? I got the official rom from HTC in the end but can't use that cause i get "invalid vendor id".
Bootloader screen details:
Code:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
509,527 807,841
815,194 207,200
212,840 Calibrated
Why don't you just HardSPL and skip the s/n number hassle? You can still flash official ROMs with HardSPL, but you don't have to worry about which variant of the Rhodium the official ROM was made for (with the exception of the Russian ROM because of the region locking used). You can flash the stock HTC 6.5 ROM when you're HardSPLed or use one of the many excellent cooked ROMs this forum has to offer.
DaveTheTytnIIGuy said:
Why don't you just HardSPL and skip the s/n number hassle? You can still flash official ROMs with HardSPL
Click to expand...
Click to collapse
not actually my phone to hardspl cause it's my stepdad's. it's also the reason i need to use the offical
note: the phone is the 3g version
Where did you buy it from? try the HTC site from where you bought it from not where you are now, if no luck than you have to HARDSpl it, .. and BTW .. if you HARDSpl and installed an official ROM, the phone will be relocked to my knowledge (i.e. it is like you never HARDSpl after you install the official ROM)
irkan said:
Where did you buy it from?
Click to expand...
Click to collapse
mobicity.com.au or something close.
where is the hardspl for the 3g phone?
Fuzz_ said:
mobicity.com.au or something close.
where is the hardspl for the 3g phone?
Click to expand...
Click to collapse
Can you do something for us? Pull out the battery and look closely under where the battery was for the text RHODXXX, where XXX is a number like 100. Post that number here, and we can figure out what model of Rhodium you have, since there is no "3G Rhodium" model. It only really depends whether you have a CDMA-GSM hybrid or GSM only device, since HardSPL (if you want to use it) differs in versions based on that alone. The link I provided earlier in this thread holds all the information you'll need to know about HardSPLing your device (once again, only if you choose to do so). At least knowing your model number will let you know which HTC official ROM to download.
has this line under the BT symbol: HTC Touch Pro2 T7373 RHOD100
the phone connects to the optus 3G network. it has the HSPDA icon when your browsing on the net
Nice to see a fellow Aussie around. As far as I now there are two versions of the Rhodium floating around in Oz. Only one of which has an official WM 6.5 rom on the HTC website. The NextG 850mHz compatible model is still waiting for an official 6.5 rom to be released but Telstra and HTC are apparently working on it.
From the HTC website:
An updated ROM is now available for HTC Touch Pro2 users to download. As always, HTC is committed to providing customers with the best possible mobile experience. Please note that there are two versions of Touch Pro2 in Australia, and this ROM update is suitable for phones operating on the 900/2100 MHz network. ROM update for phones on the Next G network will be available soon.
Click to expand...
Click to collapse
Hope this helps
i just found out the S/N worked on the Malaysian site (says South East Asia at the top). So i'm downloading that now.
should fix some things up in it. i had the feeling the phone was imported because the power adapter travel plug was not the 3-prong for aussieland