I have essentially bad luck buying these phones. On my blackstone, i was able to work around it using USPL. Now, the rhodium i have, it's S/N doesn't work on any of the HTC download pages
i need help with diffusing the bootloader screen. What should i use to upgrade this phone to WM 6.5? I got the official rom from HTC in the end but can't use that cause i get "invalid vendor id".
Bootloader screen details:
Code:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
509,527 807,841
815,194 207,200
212,840 Calibrated
Why don't you just HardSPL and skip the s/n number hassle? You can still flash official ROMs with HardSPL, but you don't have to worry about which variant of the Rhodium the official ROM was made for (with the exception of the Russian ROM because of the region locking used). You can flash the stock HTC 6.5 ROM when you're HardSPLed or use one of the many excellent cooked ROMs this forum has to offer.
DaveTheTytnIIGuy said:
Why don't you just HardSPL and skip the s/n number hassle? You can still flash official ROMs with HardSPL
Click to expand...
Click to collapse
not actually my phone to hardspl cause it's my stepdad's. it's also the reason i need to use the offical
note: the phone is the 3g version
Where did you buy it from? try the HTC site from where you bought it from not where you are now, if no luck than you have to HARDSpl it, .. and BTW .. if you HARDSpl and installed an official ROM, the phone will be relocked to my knowledge (i.e. it is like you never HARDSpl after you install the official ROM)
irkan said:
Where did you buy it from?
Click to expand...
Click to collapse
mobicity.com.au or something close.
where is the hardspl for the 3g phone?
Fuzz_ said:
mobicity.com.au or something close.
where is the hardspl for the 3g phone?
Click to expand...
Click to collapse
Can you do something for us? Pull out the battery and look closely under where the battery was for the text RHODXXX, where XXX is a number like 100. Post that number here, and we can figure out what model of Rhodium you have, since there is no "3G Rhodium" model. It only really depends whether you have a CDMA-GSM hybrid or GSM only device, since HardSPL (if you want to use it) differs in versions based on that alone. The link I provided earlier in this thread holds all the information you'll need to know about HardSPLing your device (once again, only if you choose to do so). At least knowing your model number will let you know which HTC official ROM to download.
has this line under the BT symbol: HTC Touch Pro2 T7373 RHOD100
the phone connects to the optus 3G network. it has the HSPDA icon when your browsing on the net
Nice to see a fellow Aussie around. As far as I now there are two versions of the Rhodium floating around in Oz. Only one of which has an official WM 6.5 rom on the HTC website. The NextG 850mHz compatible model is still waiting for an official 6.5 rom to be released but Telstra and HTC are apparently working on it.
From the HTC website:
An updated ROM is now available for HTC Touch Pro2 users to download. As always, HTC is committed to providing customers with the best possible mobile experience. Please note that there are two versions of Touch Pro2 in Australia, and this ROM update is suitable for phones operating on the 900/2100 MHz network. ROM update for phones on the Next G network will be available soon.
Click to expand...
Click to collapse
Hope this helps
i just found out the S/N worked on the Malaysian site (says South East Asia at the top). So i'm downloading that now.
should fix some things up in it. i had the feeling the phone was imported because the power adapter travel plug was not the 3-prong for aussieland
Related
Hi All,
I had lot of difficulty searching for different articles on how to upgrade my Indian Airtel Locked 2G Diamond to any of the NON-HTC ROMs.
Doubts were in mind as to which version of HardSpl, Radio will work with 2G Indian Diamond, whether Airtel lock has to be removed before upgrade, whether i'll brick my phone if i did not unlock it, so and so forth..
Hence i thought i'll share whatever i did to make my Diamond faster:
STEP BY STEP GUIDE TO UPGRADE INDIAN 2G AIRTEL LOCKED DIAMONDS:
Before going to any steps please note that whenever you use the RUU (HardSpl / Radio / ROM) please wait till the install is over, do not disconnect your cable / active sync connection or use the phone.. Sometimes u may not see activity on the PC/Phone, just wait and wait and all will be fine, u touch the diamond & it may get bricked!!
This tutorial has nothing to do with Unlocking from Airtel Network, and after doing a ROM upgrade your phone is still locked to Airtel only..
There is no need to unlock your Airtel Locked Diamond before going ahead with these steps:
Step1:
BACKUP:
Backup all your files, contacts, sms, PIM etc.. (I used PIM Backup v2.8)
Tip: The internal Storage does not get formatted unless you do a hard reset (anytime later after upgrade), still i recommend to backup your Internal storage.. just in case.., then use Sprite Backup, to backup in total..
Step2:
CHANGE TO HARDSPL FROM SPL:
SPL is like BIOS of your computer, HardSpl is a customised BIOS (Like HP bios may not allow u to tweak ur computer fully, the SPL does not allow custom non HTC ROMs)
To change SPL to HardSPL, use Olinex 1.40 Unsigned, also called Unsigned Olinex HardSPL Developer Edition
From this page download - Hard-SPL-Diamond-OliNex.zip (1.92 MB, 21113 views)
Please read details of what to do and what not to do during HardSPL on this page.
Tips:
Check whether your SPL is Changed to HardSPL by going into bootloader screen - Press [Vol Dwn] & [RESET] simultaneously to enter bootloader screen
Dont go to step3 unless you have changed to HardSPL & confirmed it on the bootloader screen
Step3:
CHANGE RADIO:
Radio is the sofware that is used to control all the connectivity (Bluetooth, Wi-Fi) & Phone (Which Band/ 3G/2G etc) functions
To change the Radio you have to do two things:
1. Download Custom RUU (A software to install your Radio - Like windows installer) 2. Selected Radio file
Dowload Custom RUU from here
2. Download radio from here, i preferred to use v1.00.25.05, now on v1.00.25.08
Please read details of what to do and what not to do while changing Radio on this page.
3. Extract both files into one single folder & install on your Diamond
Tips:
Changing the Radio is like getting a permission to install unofficial ROM, it wont remove Airtel Lock..
Check whether your Radio is Changed to desired version by doing a soft reset
Dont go to step4 unless you have changed & confirmed the desired Radio version with Soft Reset
Step4:
CHANGE ROM:
You can choose any unofficial ROM to install but as our Indian Diamonds are different (2G), you should be doubly sure that the ROM you select does not include a Radio (Coz all other radios will be 3G) Of course most of the ROM are devoid of Radios and SPL, but also most famous ROM cookers mention what their ROM contains and what it doesnt..
a. Select & Download a ROM, just install it..
b. Some ROMs need you to install it through RUU utility
c. Hard Reset the device once you have finished installing the ROM and make your Diamond a faster & cutomised machine..
Step 'c' is very important for your diamond to work properly
Please read details of what to do and what not to do while changing ROM on this page.
Tip:
I used SwiftBl 6.5... works like charm and flawless.., also used Dutty's ROM - not my cup of tea, as there were no updates of SwiftBL after 05/10/08, now i'm on Pistonripper.. Fast & Furious..!!
Step5:
RESTORE:
Restore from PIM Backup / Sprite Backup..
Thanks to many friends & posts who helped me use an XDA SITE ROM..
This post is mainly for my indian diamondwala counterparts & are only the main steps in brief, and mainly to mention what versions worked flawlessly on 2G version..
Please refer to more details espcially THIS post which gives very detailed account of upgrading..
Hope this post helps few..
Seniors / Moderators please read the article and if mistakes then point out.. I have used simple understandable words for newbies like me..
karkalanand said:
Indian Diamonds are different (2G)
Click to expand...
Click to collapse
do u mean that diamonds supplied by airtel are physically stripped off of 3G or is it just a software restriction?
Yes, Indian Diamonds dont have a 3G chip itself, if you look at indian website specs, the processor is different from rest of the world i.e. MSM7206A, while rest of the world it is MSM7201A (MSM7206A = MSM7201A - 3G Chip)
So there's a clearly different hardware..
keeping aside 3G & Quad band , the indian diamond is same as international, right?
Using a 3G 900/2100 Diamond in India...
Many thanks for this thread....very helpful
For a 3G diamond 900/2100 + Tri band GSM...will the Quadband radio v1.00.25.05 work?....
Will the 3G diamond work with this Radio in Europe where UMTS 2100 exists?
What will be the best cooked ROM for such a config? SwiftBl 6.5?
Thanks in advance...
@ karkalanand
hey man i'm lil confused here......i was reading through this thread and came to see that boinger66 claims maybe the indian version has 3g capability , what do u think ?
Indian diamond => 3G?
@blufade
Check these links...found the 7201A specs but not the 7206A ones...dunno why?...
http://www.qctconnect.com/products/msm_7201.html
http://www.jaganath.net/content/mobile/should-you-buy-the-htc-touch-diamond-in-india/210
Surely confusing unless someone flashes using the 3G radio and goes out of India ...to check it out...very expensive test...
btw, does the airtel diamond have gps chip ?
yes it does have GPS .. all the same only its 2G ..
thanks fr the help guys
btw, has any of u guys in india managed to get a pouch for your diamond ?
thats all quickgps does... it downloads information that would help your gps get a faster fix... you need a gps software to actually use ur gps....for eg, navigating softwares for use in india - satnav (www.satnavtechnologies.com/), mapking, inav (http://inav.mapmyindia.com/) ... Or even offroad navigation softwares like Gps Tuner
is it possible to get the simlock back to the phone ???
atul.dharne said:
@blufade
Surely confusing unless someone flashes using the 3G radio and goes out of India ...to check it out...very expensive test...
Click to expand...
Click to collapse
Sure enough I'll be flashing my India 2G Diamond (DIAM140) in the next few days with the info given. I think I'm ready after reading for 2 weeks straight.
I'll be leaving from Iraq in Oct. to go to Kuwait, then in Nov. will be headed to Germany, then taking my R&R Leave to the US.
I'll let you guys know how everything works out when I get to the states with it.
Got it on the first try
Hey I gotta say thanks you guys on this site rock.
I'm a N00b and came to this site reading and just getting info for 2 weeks straight and today was able to flash the unsigned hardspl, 1.00.25.05 radio, and swiftbls rom and to my suprise I had no issues. Reading and following directions is what I'm use to in the Army lol and that helped out. Thanks everyone.
Couple of things, it shouldnt matter what the red lettering says when i turn the device on right as long as the tri-color screen says olinex 1.40?
Now i will continue to look through this ROM and if i have any problems I'll read then ask questions if i can't find it.
Hooah. Thanks alot again for the indian diamond tutorial!!!
congrats justo81
now that u've upgraded , any noticable improvement in performance ?
Oh yes lots of notable improvments in performance. When switching to different screens there isnt that lag that was there. The time it use to take my calls to connect on the old radio is reduced now. Almost like I'm in the states and I'm calling people from Iraq!! lol
Still searching in the forums to get GPS working with google maps. Doesnt seem to want to locate the bird (satellite) when I know the direction of most of them cause I'm a commo guy and we log on them on the time
Overall. I'm glad I upgraded and look forward to exploring and adding some more apps with this device
justo81 said:
Thanks alot again for the indian diamond tutorial!!!
Click to expand...
Click to collapse
Thanks, i'm happy it's helped atleast one mate..
hi guy pls help me to get airtel pack which came with my dimond i upgraded rrom & i missed it pls help me if posible
jatin_barot said:
hi guy pls help me to get airtel pack which came with my dimond i upgraded rrom & i missed it pls help me if posible
Click to expand...
Click to collapse
No AirTel pack came with my 2G diamond. Its only Content folder in Internal Storage which contains TF3D demo and some audible files. Do you require? I mean Content folder.
HTC too much RAM processes
Guys i have a problem that Touch diamond(Unlocked Airtel )when i launch the music from Touch flow 3D the process percentage(one u can see from quick tab) goes to 70 to 80 even after stopped listening to the songs the process doesn't go down, this makes other applications to work slower ,, could u help me fix this .ROM version is 1.93.720.0 WWE and in HTC india site a new update is released dated 16-1-2009, i couldn't download that(though i had registered my phone) it says my software doesn't support this (when i give my serial number) so please guys help me in this
how will we get the free update when its out will it be via htc or microsoft
combat goofwing said:
how will we get the free update when its out will it be via htc or microsoft
Click to expand...
Click to collapse
ms release it officially then the manufacturers then roll it out for their devices. htc is just one manufacturer of wm devices and you also get network branded devices i.e tmobile mda vario 5. in case of a network branded device you will need to wait for them to provide an update if they do it at all.
then there is xda where none of that matters! as soon as MS release officially there will be all the variants of it on here! once hard spl is out for this device mate watch out
as a new what is this hdspl i keep reading about
SPL's including HardSPL is explained here:
http://wiki.xda-developers.com/index.php?pagename=SPL%20Questions%3F
The official ROM from HTC will be posted on their web site (reasonably soon after the release from MS):
http://www.htc.com
You'll find it under the Support (tab) on the web site. Just select the country/region of your phone (at the top right of the HTC's site) and select the phone.
The ROM update comes as a windows installer - just follow the instructions.
This is safer that blasting on custom ROMs for the squeamish like me
See here for the Custom ROM steps for the Kaiser (TyTN 2) if you want a taster
http://forum.xda-developers.com/showthread.php?t=433835
-- haongusa.
combat goofwing said:
as a new what is this hdspl i keep reading about
Click to expand...
Click to collapse
In case you mean "HSDPA" that is a cellular network connection that allows you to do voice and data at the same time. (i.e. surf the internet or send MMS while talking on the phone).
If you mean Hard SPL, read the link provided above.
when will ROM with wm6.5 will come out here?
I'm considering buying a new TP2 (I have a TP with wm6.5) but I want to change when wm6.5 is available for TP2.
I guess I won't be used to WM6.1 anymore... lol
The new official ROM for Pro2 is out on HTC's website
http://www.htc.com/sea/SupportDownload.aspx?p_id=250&cat=2&dl_id=627
thkc said:
The new official ROM for Pro2 is out on HTC's website
http://www.htc.com/sea/SupportDownload.aspx?p_id=250&cat=2&dl_id=627
Click to expand...
Click to collapse
The changelog doesn't look very promising. Maybe someone can give a review about the improvements -I have to wait for the German ROM to be released
skycamefalling said:
The changelog doesn't look very promising. Maybe someone can give a review about the improvements -I have to wait for the German ROM to be released
Click to expand...
Click to collapse
Hope the Dutch - NL rom comes available soon.
At this moments my Pro2 is very slow, hangs often...it sucks
Regards,
Schmia
I tried to get my hands on it, but my serial is not valid...only for SEA grgrgrgrgrgrgr how long to wait...Im as well some times stuckt...as well as for the upgrade for GPS and SMS...that's not working for my rom....
Forgive the noob question, but I've never owned an HTC device this close to the original release date, nor a SIM free one.
My TP2 has the following:
ROM version: 1.19.401.0 (51489) WWE
ROM date: 05/16/09
Radio version: 3.44.25.27
Protocol version: 61.25t.25.19U
Would I be able to flash the RUU_Rhodium_hTC_Asia_WWE_1.19.707.2_Radio_Rhodium_3.44.25.27_Signed_Ship.exe from the Wiki?
I don't know a lot about stock ROMs - all my previous devices have been out long enough that there's a huge amount of custom ones on here.
The HTC site said that the update wasn't for my phone (it's only on the HTC Asia site, not the HTC UK one), but I'm an impatient guy!
WWE is, I believe, WorldWide English, which is what my current ROM is - I'm just mildly concerned about the Asia part. It's not going to have the default language to be Thai or anything, right? (I don't have an original ROM anywhere, so can't revert back if it all goes tits-up)
1. The Financial Providers Icon (Yahoo!) was placed in the Stock Tab in TouchFLO Pro to be clear on where the data originated.
2. The phone now shows the actual amount of RAM (288MB) instead of the amount used in previous models (256MB).
it is useless~=-=
My device is a sim free version that I bought (no carrier attached) and yet I can't get the upgrade!? What's going on...?
One more for the goldcard. Come on, last week I've been updating my HTC, now a new ROM... OK...
Wait a second... It's the same that I have? What the...
So if it was the same, I could say that this ROM already had the Radio FM aplication, the Voice Recorder one, the MP3 Trimmer, and It looks a little faster in the Touch Flo3D. At least looks like.
sec is not?
Can anyone please give me a hint at an SEA serial number so I can upload the ROM to my library (and then I will be able to grab newer SEA ROMs when they become available)?
Failing that, can someone make the file available else where?
wootty2000 said:
can anyone please give me a hint at an sea serial number so i can upload the rom to my library (and then i will be able to grab newer sea roms when they become available)?
Failing that, can someone make the file available else where?
Click to expand...
Click to collapse
htc963ll007xx
HT961LL029xx also works.
loads
ERROR (294) INVALIDVENDER ID
What should I do?
The UK support site now has this and one other hotfix listed. They're at:
For the GPS Hotfix (to allow faster AOS in third-party GPS applications)
http://www.htc.com/uk/SupportDownload.aspx?p_id=250&cat=0&dl_id=624
For the SMS Hotfix (to allow "+xx" international phone numbers to be sent SMS messages):
http://www.htc.com/uk/SupportDownload.aspx?p_id=250&cat=0&dl_id=625
Hope the above helps
i got my TP2 upgraded and now the RAM is 288MB
schmia said:
Hope the Dutch - NL rom comes available soon.
At this moments my Pro2 is very slow, hangs often...it sucks
Regards,
Schmia
Click to expand...
Click to collapse
The Dutch rom is available on the HTC-site. Dutch ROM
wimmeswaggel said:
The Dutch rom is available on the HTC-site. Dutch ROM
Click to expand...
Click to collapse
Yeah, thanks... Also an dutch user here
Upgrading right now
truffle1234 said:
i got my TP2 upgraded and now the RAM is 288MB
Click to expand...
Click to collapse
That's one of the fixes.
kelvin123204 said:
1. The Financial Providers Icon (Yahoo!) was placed in the Stock Tab in TouchFLO Pro to be clear on where the data originated.
2. The phone now shows the actual amount of RAM (288MB) instead of the amount used in previous models (256MB).
it is useless~=-=
Click to expand...
Click to collapse
my opinion too ...
HTC read the book "how to release frequent updates doing nothing"
how to update htc touch diamond (verizion) 6.1 to 6.5 .....help me please
Its no difference then flashing a 6.1 rom
Söderström said:
Its no difference then flashing a 6.1 rom
Click to expand...
Click to collapse
Wow that must have helped him alot.
classico_007 said:
how to update htc touch diamond (verizion) 6.1 to 6.5 .....help me please
Click to expand...
Click to collapse
Next time please use search.. Or at least read the sticky threads.
http://forum.xda-developers.com/showthread.php?t=416211
It depends whether your phone is GSM or CDMA. I don't know what Verizon is at the moment, I think they are CDMA but check that before doing anything. The above tutorial is for GSM versions so if your phone is CDMA please don't flash anything from that tutorial just read it to get a basic idea of what you should do.
You basically need a hardSPL flashed which is explained in the tutorial. After that, you can basically flash any ROM you like as long as you flash GSM ROM's if your phone is GSM or CDMA ROM's if your phone is CDMA.
i have e htc touch diamond GSM Version Rom 1.93.422.4 radio version 1.00.25.08 4gb internal storage bought in usa and now I use it in Europe (Albania). I saw on the page the aplications but appear to be older than i have actually. a I tried to update rom from htc.com but apparently the serial number is wrong .....
i have e htc touch diamond GSM Version Rom 1.93.422.4 radio version 1.00.25.08 4gb internal storage bought in usa and now I use it in Europe (Albania). I saw on the page the aplications but appear to be older than i have actually. a I tried to update rom from htc.com but apparently the serial number is wrong .....
classico_007 said:
i have e htc touch diamond GSM Version Rom 1.93.422.4 radio version 1.00.25.08 4gb internal storage bought in usa and now I use it in Europe (Albania). I saw on the page the aplications but appear to be older than i have actually. a I tried to update rom from htc.com but apparently the serial number is wrong .....
Click to expand...
Click to collapse
HTC won't let you download ROM updates from their site if you have a network-branded (ie, Orange, Vodafone) Diamond. For official ROM updates you need to check your phone network's web site.
is there anyway i could install an english language pack into my touch diamond 2 without i have to brake and flash it with a full flash??
I need to change the language to english from swedish but i would still like to keep the swedish language just incase....like on other multilanguage phones
Hi, I was wondering if someone could help me out with detailed instructions.
I am faily new to the world of PDA's and smart phones.
I just bought HTC touch Pro 2 from Telstra. Its all customised with Telstra/Bigpond.
My question is how can I remove Telstra customisation completely from the phone?
FYI,
Device Information.
Rom Version: 1019.841.3 (51489) WWE
Rom Date: 06/04/2009
Radio Version: 3.44.25.27
Windows 6.1
Your help would be highly appreciated. Also, could you please provide complete steps for the solution you provide.
Thanks for your help
Nothing much you can do. You can flash a custom ROM if you want to totally remove Telstra stuff.
Having said that there are some good stuff in Telstra ROM. Free web browsing to certain sites (BigPond, Sensis, Yellow Pages, Trading Post, etc.....) And there are free apps like WhereIs where the data download is not counted towards your usage. And there are 2 free apps Jetcet Print and Jetcet Presenter. The former for printing directly from phone and the latter for creating/editing Powerpoint slides.
But if you don't want any of these, you can always flash a custom ROM of your choice.
Yep just flash a custom rom simple
If you don't mind me asking, did you buy the phone outright or on a plan?
If outright, how much did you pay?
i'd like to get rid of the the telstra things too
phrak, i just bought mine yesterday at harvey norman, it was $1479 outright and with extended warranty (ex wty was 99)
pinkdiamonds said:
i'd like to get rid of the the telstra things too
phrak, i just bought mine yesterday at harvey norman, it was $1479 outright and with extended warranty (ex wty was 99)
Click to expand...
Click to collapse
Well you can always flash a cooked ROM if you like. I haven't yet as I'm quite happy with the Telstra ROM. I don't like the purple color theme so I installed another theme. I am quite happy with what I have got so far. Would wait for Telstra WM6.5 upgrade and see if it is any good.
You can manually remove Telstra items by editing registry
Check this forum.
http://forums.whirlpool.net.au/forum-replies-archive.cfm/1286616.html
Hi Guys
anyone know how i can get back my Original Telstra rom !
thanks
Touch Pro 2 Sprint on NextG
Hi I just got a Touch Pro 2 Sprint CDMA GSM version from the USA. I know you'd probably wonder why but because it has the inbuilt 3.5mm headphone jack. I unlocked everything on the phone and changed the radio to the 2.05.00WU (USCC test edited) version, changed the ROM to try the 6.5.3 energy rom. I know the phone supports CDMA 850. But aren't sure if it's now possible to get it to work on NextG.
Is anyone able to confirm if it's possible? I think it runs on the CDMA2000 1X 1900/800 band. And from what I've been reading it mightn't support the 2100 band, so mightn't be able to get it to work at all.
I'd like one with the headphone jack but like the keyboard also. Don't really want a Touch HD2 thought they would be alright with the 1Ghz CPU.
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
I have the same problem !
Hi there, it sounds like Im in the same boat as you are or were... I also have a RHOD110 from Telstra but I want to upgrade it to win 6.5 and I'm just not sure which ROM will be applicable a) for this model or b) for the Australia service (3g)
I wonder did you manage to get this sorted out and would you be kind enough to give me any info that may help from your own experence ?
Thanks in advance !
I have the same problem ! HELP NEEDED
ultramag69 said:
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
Click to expand...
Click to collapse
I have the same problem !
Hi there, it sounds like Im in the same boat as you are or were... I also have a RHOD110 from Telstra but I want to upgrade it to win 6.5 and I'm just not sure which ROM will be applicable a) for this model or b) for the Australia service (3g)
I wonder did you manage to get this sorted out and would you be kind enough to give me any info that may help from your own experence ?
Thanks in advance !
ultramag69 said:
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
Click to expand...
Click to collapse
Hi there, I'm kinda new at all this as well and I'm in the same boat as you are or were. I also have a Telstra RHOD110 and I want to upgrade to win 6.5, however, Im just not sure about a) which rom upgrade will work on the 110 or b) which one will be compatable with Australian 3G services ?
ANY help or assistance in this area will be greatfully appreciated !
Thanks in Advance
Download & install enablerpinew.cab. You should then be able to Hard SPL.. I also have Rhod110 from Telstra.
Next G works fine, its a hardware feature so it will always pick up Next G, but you may need to get the GPRS settings from Telstra and manually input them.
Use Manual Hard SPL if auto doesn't work, just need to install enablerpinew.cab 1st, and only once... After that any rom works finre...
Cheers...
ultramag69 said:
Download & install enablerpinew.cab. You should then be able to Hard SPL.. I also have Rhod110 from Telstra.
Next G works fine, its a hardware feature so it will always pick up Next G, but you may need to get the GPRS settings from Telstra and manually input them.
Use Manual Hard SPL if auto doesn't work, just need to install enablerpinew.cab 1st, and only once... After that any rom works finre...
Cheers...
Click to expand...
Click to collapse
I have an import RHOD100 that I bought SH. I have Flashed it with both the Aus Telstra Roms and neither seems to access 3G signal. Does this mean the phone physically cant or is there something else I can do???
FYI it actually gets better coverage than my Snap did and that was a telsta phone. But I dont know what the coverage will be like further out of town.
Im running:
1.86.710.3 WWE Rom
4.49.25.17
RHOD100
T7373
i myself want an RHOD110 because of the fact it is the AU model :/