Develop Bugs

HELP!!! TYTN put to sleep and wont wake up unless reset

Hi, i have a softbank verision of the tytn....running faria version of wm6....now when i switch it off to sleep.....i cant switch it back up to wake the phone up....i have to poke the reset button to start again.....anyone know the reason to this.....this also happen to my wizard before.....

Hi
I've had exactly same prob running Black Shadow
I believe mine was caused through adding some themes onto device that it didnt like - once removed all was well. Have you added any ?
Try removing them all then adding them gradually - do the same if running any 3rd party apps.
regards
Jon

Experienced exactly the same issue with the latest Shadow and radios both 1.40 and 1.43. Hang-ups were happening only after any media/audio playing application was ran before (tested with Pocket Player and WMP), in 10 out of 10 cases Hermes wasn't coming back from sleep. The culprit was (tadah) Bluetooth Explorer, after getting rid of the bugger I haven't experienced any freezes or hung-ups at all and my device is rock solid. Just the heads up.

JPW said:
Hi
I've had exactly same prob running Black Shadow
I believe mine was caused through adding some themes onto device that it didnt like - once removed all was well. Have you added any ?
Try removing them all then adding them gradually - do the same if running any 3rd party apps.
regards
Jon
Click to expand...
Click to collapse
i currently have a folder full of theme.....and probably like 10 apps.....i try to keep my app down as it slows down my pda.......but will take your advice and give it a go....dont want to flash and reinstall everything again.....

kyods said:
Experienced exactly the same issue with the latest Shadow and radios both 1.40 and 1.43. Hang-ups were happening only after any media/audio playing application was ran before (tested with Pocket Player and WMP), in 10 out of 10 cases Hermes wasn't coming back from sleep. The culprit was (tadah) Bluetooth Explorer, after getting rid of the bugger I haven't experienced any freezes or hung-ups at all and my device is rock solid. Just the heads up.
Click to expand...
Click to collapse
i wonder if its any of my app that is also causing the problem....

I think is one problem with this name STD (sleep to death). Read about this on this http://forum.xda-developers.com/archive/index.php/t-256494.html and I post the file. Read also this:
- Backlight light can't turn on after sleep mode
- STD
About DisablesyncSchedule:In WM5/6, activesync connects automatically time to time (even if device is turned off), and would cause STD, specially with SD Card inserted.
DisablesyncSchedule.cpf Install procedure:
Copy DisablesyncSchedule.cpf to your device
Run DisablesyncSchedule.cpf (using File Explorer on your PPC). It will show:
"Device Settings Changed".
Then Soft-Reset and verify if the STD is gone...
I hope help you

Fidalgos said:
I think is one problem with this name STD (sleep to death). Read about this on this http://forum.xda-developers.com/archive/index.php/t-256494.html and I post the file. Read also this:
- Backlight light can't turn on after sleep mode
- STD
About DisablesyncSchedule:In WM5/6, activesync connects automatically time to time (even if device is turned off), and would cause STD, specially with SD Card inserted.
DisablesyncSchedule.cpf Install procedure:
Copy DisablesyncSchedule.cpf to your device
Run DisablesyncSchedule.cpf (using File Explorer on your PPC). It will show:
"Device Settings Changed".
Then Soft-Reset and verify if the STD is gone...
I hope help you
Click to expand...
Click to collapse
this definitely sound like my case.....will give it a go...thx....

hmmm....dont know if it work....i click the file....only flashes....no other indicator that it ran.......

dont think it work....cuz it just die out again

It will show:
"Device Settings Changed".
Click OK on the message (to go out... and another OK on the X button) then Soft-Reset.
I have in the past this problem with WM5 (Eten M600 device) and with HTC WM5 but with this method no more STDs on this devices.
Look if your battery is under 20%. With the ROM you flash I have an STD also and I see my battery is low when I do a Soft-Reset. So... when charged up >20% never more an STD.
Regards
*** maybe you need try a CUSTEL ROM (cingular or standard version) or Schaps ROM no problems for me with this two. Now I stay on Schaps 3.30b WWE but I wait for the upgrades Schap's and Custel (maybe to this sunday). I try also Faria ROM but I have problems (I dont remember) but I remove on the day after... like Shadow (very nice the aspect but for me no video-call and I dont like the combination sms/mms so... I reflash with Schap's and I wait to compare the new upgrades promised for this week-end).

Fidalgos said:
It will show:
"Device Settings Changed".
Click OK on the message (to go out... and another OK on the X button) then Soft-Reset.
I have in the past this problem with WM5 (Eten M600 device) and with HTC WM5 but with this method no more STDs on this devices.
Look if your battery is under 20%. With the ROM you flash I have an STD also and I see my battery is low when I do a Soft-Reset. So... when charged up >20% never more an STD.
Regards
*** maybe you need try a CUSTEL ROM (cingular or standard version) or Schaps ROM no problems for me with this two. Now I stay on Schaps 3.30b WWE but I wait for the upgrades Schap's and Custel (maybe to this sunday). I try also Faria ROM but I have problems (I dont remember) but I remove on the day after... like Shadow (very nice the aspect but for me no video-call and I dont like the combination sms/mms so... I reflash with Schap's and I wait to compare the new upgrades promised for this week-end).
Click to expand...
Click to collapse
program didnt run.....do you have another file or something....or the code...or regedit thing.......will probably try another rom.....

Fidalgos said:
It will show:
"Device Settings Changed".
Click to expand...
Click to collapse
I finally found this msg....and it didnt pop rite out.....guess where i found it.....in my sms mail box....lol....the phone didnt die yet......usually die within a min before....have to see for long run.....

bure82 said:
I finally found this msg....and it didnt pop rite out.....guess where i found it.....in my sms mail box....lol....the phone didnt die yet......usually die within a min before....have to see for long run.....
Click to expand...
Click to collapse
Mine too... Is it finally the END of the F_n STD thing... praying...

bure82 said:
I finally found this msg....and it didnt pop rite out.....guess where i found it.....in my sms mail box....lol....the phone didnt die yet......usually die within a min before....have to see for long run.....
Click to expand...
Click to collapse
YES I remember now... the message go to mail SMS, sorry for my bad explanation but shoore you dont have anymore STDs. Save the file I post on your Utils>folder for the future!

ok...after my test for night the std is gone.....but after a soft reset...it came back....

dont do a Soft-Resets... LOL try this... upon click on the file I post... move to your sms inbox...one click on the message to open until display the message "device settings..." then click on the OK button. Now... dont do a Soft-Reset but... press 3 or more seconds on the Power-off button of your device until appear one warning "Power will be turned off, and you may lose data if.... Do you want to continue?", Press YES. Your device power-off and save your settings.
ok... wait a litle and press the power button 2 or 3 seconds and you see the startup OS (like you put your stylus on the whole when you do a Soft-Reset) but is different.
My friend... make one more try and if no have a good result now... buy another device, LOL, sorry... change your ROM.
I hope @SaarAvigour say something about your experience upon a Soft-Reset.

will try....i flash the custel rom.....havent std on me yet.....but....i think all device will have the same problem if microsoft dont fix this.....lol.....i just bought this tytn....used it for less than a week.....

std is kinda gone.....std on me this morning.....but less often now.....another problem now is that the phone freeze on me if i click too fast or sometime when syncing with the comp....have to be very careful now.......

Problems Hanging up

did a search and nothing really came up...
My problem is that when i make a phone call i cannot hang up. The system seems to lag. i touch end...nothing happens, i push the red hangup button...nothing happens, then after SEVERAL seconds it finally hangs up.
Did not have the problem with wm5 but every rom for wm6 has had this issue on my phone.
Currently have blackshadow 4.0
radio 1.41
Please help!!! its really annoying when i dont want to leave a voice mail but cant hang up.
I appreciate any help i can get!

jwagman1 said:
did a search and nothing really came up...
My problem is that when i make a phone call i cannot hang up. The system seems to lag. i touch end...nothing happens, i push the red hangup button...nothing happens, then after SEVERAL seconds it finally hangs up.
Did not have the problem with wm5 but every rom for wm6 has had this issue on my phone.
Currently have blackshadow 4.0
radio 1.41
Please help!!! its really annoying when i dont want to leave a voice mail but cant hang up.
I appreciate any help i can get!
Click to expand...
Click to collapse
i am running black shadow with radio 1.43 and i have the same problem, the response time for hangup on shadow is really long!! i have to press the red cancel button 4-5 times to get a call to end

Try the latest LSVW 0616, it functions well and seems very stable.
Good luck.

simple said:
Try the latest LSVW 0616, it functions well and seems very stable.
Good luck.
Click to expand...
Click to collapse
Excuse me but was that REALLY helpful? If I was to post "my Chevy truck won't turn off" would you post "get a Ford truck, they do"??
(no, my post wasn't helpful either)

anyone else have this problem or know how to fix??

I had the same problem with the 143 radio.. First I installed the 141 radio and then reinstalled Shadow. works fine now.Try reinstalling Shadow.

could this actually be the radio? only reason i ask is i had just flashed radio 1.43 and shadow at the same time, can someone please tell if it is jus a radio reflash or do i have to go through and reinstall shadow as well?

There is a new 3g dialler made available by Jasjamming at his new home that will now work on the Shadow rom, this will probably help you.
jwagman1 said:
anyone else have this problem or know how to fix??
Click to expand...
Click to collapse

ew
ewewewewewew

Dr Puttingham said:
Excuse me but was that REALLY helpful? If I was to post "my Chevy truck won't turn off" would you post "get a Ford truck, they do"??
(no, my post wasn't helpful either)
Click to expand...
Click to collapse
Actually that might be helpful because the Chevy maybe doesn't work. I have had the same problem with Shadow and had to switch. I am using 1.43 and Schap's 3.30b now and it seems to be better. Custel's worked ok too - waiting for his next update.
Mark
Edit - Based on other posts maybe I should switch to 1.41.

Is this what you do just to increase your post count?
JBaxendale said:
ewewewewewew
Click to expand...
Click to collapse

boz said:
There is a new 3g dialler made available by Jasjamming at his new home that will now work on the Shadow rom, this will probably help you.
Click to expand...
Click to collapse
Sorry for being dim but i seem to have lost the address of Jasjamming's ne home, can you tell me please?
thanks in advance

fmg9800 said:
Actually that might be helpful because the Chevy maybe doesn't work. I have had the same problem with Shadow and had to switch. I am using 1.43 and Schap's 3.30b now and it seems to be better. Custel's worked ok too - waiting for his next update.
Mark
Edit - Based on other posts maybe I should switch to 1.41.
Click to expand...
Click to collapse
Maybe it DOES work, just not for you. Be careful when you dis a ROM here my friend, especially when you're using the latest GSM.

I had the same problem with Black Shadow IV using Radio 1.43 and 1.41, Now i use 1.40 and it is working fine.

i have tried 1.43 and 1.41 and neither fix this, ill revert to 1.40 and see if that fixes it.

shafez said:
I had the same problem with Black Shadow IV using Radio 1.43 and 1.41, Now i use 1.40 and it is working fine.
Click to expand...
Click to collapse
1.40 doesnt work either...

Hi jwagman1,
Dont have such a problem. When testing black shadow with 1.43 with different software, there was a lot of issues - in general the rom was very unstable etc. - almost permanently freezing. The test (not very scientific) showed that all kind of battery status software are causing problems - My solution was to reinstal the shadow only, not using any battery status packages, and the rom is performing really well now.
The problem might come also from some kind of incompatibility with the network of your carrier - as I got the 1.43 is not Hermes radio. Pumpiron579, who had the same problem also seems to be on Cingular
In such a situation I wll install new radio (e.g. 1.40), and new Rom (not shadow) too, and see.

Same problem with me on Shadow. Let's try Shadow lite or dymond 3.5 BS, it's work fine for me.
(radio 1.43)

dont mean to sound funny guys, bet everyone is trying radios and no-one is getting the right effect, might i suggest that it is a common problem within shadow.
I have tryed backdating 1.43 -> 1.41 -> 1.40 -> flashing to 1.38
this is getting silly now, 20 mins per flash lol i have been flashing for nearly 80 mins (if i was on a street i would have been arrested by now lol)

Same problem here Custel v2.5, Radio 1.40.30.00.
Hang up button (hard and soft) will not work 25%+ of the time.

Anyone have no vibrate in new WM6 roms?

Hi All
Since the release of the official WM6 roms I have tried both the Dopod rom and VP3Gs AT&T rom and with both I have trouble getting the vibrate for incoming calls, SMS and emails to work.
On the Dopod rom it was intermittent, changed to VP3Gs rom and now it doesnt work at all. Never had this problem before.
Im using PhoneAlarm, have tried various different versions fom the official release to several of the most recent betas and still no vibrate. Dont think PhoneAlar is responsible.
Read all the other threads and no one else seems to have mentioned this so Im wondering if its just me.
Cheers
Rob

Sounds like its just you..sorry

robt2379 said:
Hi All
Since the release of the official WM6 roms I have tried both the Dopod rom and VP3Gs AT&T rom and with both I have trouble getting the vibrate for incoming calls, SMS and emails to work.
On the Dopod rom it was intermittent, changed to VP3Gs rom and now it doesnt work at all. Never had this problem before.
Im using PhoneAlarm, have tried various different versions fom the official release to several of the most recent betas and still no vibrate. Dont think PhoneAlar is responsible.
Read all the other threads and no one else seems to have mentioned this so Im wondering if its just me.
Cheers
Rob
Click to expand...
Click to collapse
Just tried on my Vodafone 1605 with Dopod ROM - working fine.

Not here
tried them all, never was an issue here
======

My Vodafone V1605 has lost vibration after upgrading to Dopod ROM. I'm also having problems with keyboard (sometimes, none of the front buttons work, but side ones work fine), and sometimes screen gets white, and comes back when you switch off and on.
I didn't know the cause, so I went back to an HTM WM5 rom, and to ATT or Black Satin, with no success.
any ideas?

robt2379 said:
Hi All
Since the release of the official WM6 roms I have tried both the Dopod rom and VP3Gs AT&T rom and with both I have trouble getting the vibrate for incoming calls, SMS and emails to work.
On the Dopod rom it was intermittent, changed to VP3Gs rom and now it doesnt work at all. Never had this problem before.
Im using PhoneAlarm, have tried various different versions fom the official release to several of the most recent betas and still no vibrate. Dont think PhoneAlar is responsible.
Read all the other threads and no one else seems to have mentioned this so Im wondering if its just me.
Cheers
Rob
Click to expand...
Click to collapse
Yea i did initially...i applied to com button/vibrate cab and it fixed it after a full reset (hold power button down to turn off the device)
i'm using vp3g's rom

|oLo| said:
Yea i did initially...i applied to com button/vibrate cab and it fixed it after a full reset (hold power button down to turn off the device)
i'm using vp3g's rom
Click to expand...
Click to collapse
Well, for no apparent reason its seems to have started working again during the day today. Still dont think its that reliable so I'll try the com button / vibrate fix cab if I can find it.
Thanks for the replies folks, I shall investigate further . . .
Rob

I switched to the official ROM, and vibrate was working initially, but just like you it has stopped working. I'm going to try the above method, but please post if you find the proper fix.

I had to add the vibrating cab to my 8525 with vp3g 3.0. Funny thing is, I'm sure his hybrid had vibrating included. I don't remember-- Senior moment!

whatledog said:
I had to add the vibrating cab to my 8525 with vp3g 3.0. Funny thing is, I'm sure his hybrid had vibrating included. I don't remember-- Senior moment!
Click to expand...
Click to collapse
yea it did...what i remember was that when i pressed and held the com button...the vibrate icon showed up but it did not vibrate like it use to and i tested it several times. The com/vibrate button cab can be found all over the place and i'm sure it's on the wiki here somewhere...or it could be a coincidence that the described method worked

Hi robt2379,
Did happened to me couple of times with Rom updatings.......try to tap at the bottom of your pda between the IR and the USB port..it fix mine.
Good Luck.

syaah said:
Hi robt2379,
Did happened to me couple of times with Rom updatings.......try to tap at the bottom of your pda between the IR and the USB port..it fix mine.
Good Luck.
Click to expand...
Click to collapse
I lost my vibration alert too.., tried above trick. no luck.
I think I'll try the vibrate cab, should I?
currently using Sleuth v2.1 ROM.

Hi guys,
For info; Chk this thread,
http://forum.xda-developers.com/showthread.php?t=294307

Hi
I do have the similar problem with the vibrate after upgrading to wm6.
I have tried to re-install the ROM again but it still does not vibrate.
Any kind soul can advice?

I was having the same problem but i knew it wasn't any software. I think there's some problem with the vibrator as in the hardware. I sent it into the service center and they replaced it for me. it was a faulty vibrator. So its all good now. The VIBRATOR works now... lol.. that sounds soo wrong...

Hi Bernard,
That's wonderful... i will be going to the service center soon hope they are able to replace one for me ...

Vibrate problems after switchin to rickys rom

My excalibur no longer vibrates for txt messages or mms msgs i have cheked all the profile settings and still nuthing thanks in advanced for any help

Yea I miss this too really bad

c-tang said:
Yea I miss this too really bad
Click to expand...
Click to collapse
Hmm that is odd. I am using Rickys V22 and I have no problems with it at all. What version of his ROM are you using?

Download the new rom I have posted below in my signature. That should resolve everything.

Clydeisthe**** said:
Hmm that is odd. I am using Rickys V22 and I have no problems with it at all. What version of his ROM are you using?
Click to expand...
Click to collapse
Let me resay my problem... in the OEM rom it vibe 3 quick pluses for a txt and long ones for a call now its all the same
and Im on Rickys V23

Unit hangs on Multi-Vibrate
I am using Ricky's V23 ROM, And I am also having "Vibrate" issues. I have the same issues with vibrations stated below, but my Dash also hangs on on multi-vibrate.

I have started having issues with the Kavana 0804 ROM and vibrating. It used to vibrate fine, but now it doesn't. This is a huge annoyance, I'm missing all my calls and text messages. I'd rather have WM2003 with vibrate than this...

hmm i got version 14 of rickys rom and it vibrates like mad.
also i put an old version of kavana's rom on my friends dash and it works fine

It may not be the ROM I suppose. I also changed my battery recently.

i have used all the roms that you guys have had issues with...and never had this problem. go to settings > profiles and on the vibrate one, change the options.. make a call vibrate, txt pulse etc...

AHHHH
isnt it so inconvinient to have to randomly check your phone for text i hate this someones gotta know how to fix this

White Screen

This just started to happen today....every time my screen timeouts...it goes completely blank...i can still hear things and receive calls...but it will stay white for like 20 seconds and then come back on... i am using Ricky's Wm6.1 any help would be great...thanks

zdub27 said:
This just started to happen today....every time my screen timeouts...it goes completely blank...i can still hear things and receive calls...but it will stay white for like 20 seconds and then come back on... i am using Ricky's Wm6.1 any help would be great...thanks
Click to expand...
Click to collapse
Hard-reset if this doesn`t solve it re-flash...

stylez said:
Hard-reset if this doesn`t solve it re-flash...
Click to expand...
Click to collapse
Interesting.... I just started having this problem as well. I went hard reset... not solved. I re-flashed (using proper procedure)... and it was solved for a couple of days... and then returned.
I then used the forum search function, crazy how that works and found this thread.
Hope that helps.

Are you using maniac's AutoKeylock ?
I have experienced this issue ever since loading Rose ROMs - didn't happen on earlier ones.
However, this last time I flashed to the latest update, I did not install AutoKeylock immediately after flashing. I left this off as I had noticed that the screen was going white 30 seconds into calls (which was the timeout I had configured in AutoKeylock) and I wondered if there was a correlation.
Can anyone else who has seen the issue comment on whether they use AutoKeylock or not. It is possible there is some change in the ROM that AutoKeylock does not handle well.
Thanks.

LiverpoolFCfan said:
I have experienced this issue ever since loading Rose ROMs - didn't happen on earlier ones.
However, this last time I flashed to the latest update, I did not install AutoKeylock immediately after flashing. I left this off as I had noticed that the screen was going white 30 seconds into calls (which was the timeout I had configured in AutoKeylock) and I wondered if there was a correlation.
Can anyone else who has seen the issue comment on whether they use AutoKeylock or not. It is possible there is some change in the ROM that AutoKeylock does not handle well.
Thanks.
Click to expand...
Click to collapse
I think that the WSOA (white screen of annoyance) is tied to the low-light function and joggr bar. Go to joggr settings, and be sure that the checkbox with the lowlight function is disabled.

I had the white screen issue for a few days, tried everything.....as soon as I uninstalled GlyphCache 65535 found here, the problem went away

Capper5016 said:
I had the white screen issue for a few days, tried everything.....as soon as I uninstalled GlyphCache 65535 found here, the problem went away
Click to expand...
Click to collapse
it comes and goes its just something messed up that happenes probably nothing to worry about, just little anoying is all.

Check power management registry settings
Hi,
I had this problem once and fixed it by changing the registry settings that control what happens when the device enters various power states. Search the forum about this as the answer is in there somewhere Hope this helps.