HELP!!! TYTN put to sleep and wont wake up unless reset - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi, i have a softbank verision of the tytn....running faria version of wm6....now when i switch it off to sleep.....i cant switch it back up to wake the phone up....i have to poke the reset button to start again.....anyone know the reason to this.....this also happen to my wizard before.....

Hi
I've had exactly same prob running Black Shadow
I believe mine was caused through adding some themes onto device that it didnt like - once removed all was well. Have you added any ?
Try removing them all then adding them gradually - do the same if running any 3rd party apps.
regards
Jon

Experienced exactly the same issue with the latest Shadow and radios both 1.40 and 1.43. Hang-ups were happening only after any media/audio playing application was ran before (tested with Pocket Player and WMP), in 10 out of 10 cases Hermes wasn't coming back from sleep. The culprit was (tadah) Bluetooth Explorer, after getting rid of the bugger I haven't experienced any freezes or hung-ups at all and my device is rock solid. Just the heads up.

JPW said:
Hi
I've had exactly same prob running Black Shadow
I believe mine was caused through adding some themes onto device that it didnt like - once removed all was well. Have you added any ?
Try removing them all then adding them gradually - do the same if running any 3rd party apps.
regards
Jon
Click to expand...
Click to collapse
i currently have a folder full of theme.....and probably like 10 apps.....i try to keep my app down as it slows down my pda.......but will take your advice and give it a go....dont want to flash and reinstall everything again.....

kyods said:
Experienced exactly the same issue with the latest Shadow and radios both 1.40 and 1.43. Hang-ups were happening only after any media/audio playing application was ran before (tested with Pocket Player and WMP), in 10 out of 10 cases Hermes wasn't coming back from sleep. The culprit was (tadah) Bluetooth Explorer, after getting rid of the bugger I haven't experienced any freezes or hung-ups at all and my device is rock solid. Just the heads up.
Click to expand...
Click to collapse
i wonder if its any of my app that is also causing the problem....

I think is one problem with this name STD (sleep to death). Read about this on this http://forum.xda-developers.com/archive/index.php/t-256494.html and I post the file. Read also this:
- Backlight light can't turn on after sleep mode
- STD
About DisablesyncSchedule:In WM5/6, activesync connects automatically time to time (even if device is turned off), and would cause STD, specially with SD Card inserted.
DisablesyncSchedule.cpf Install procedure:
Copy DisablesyncSchedule.cpf to your device
Run DisablesyncSchedule.cpf (using File Explorer on your PPC). It will show:
"Device Settings Changed".
Then Soft-Reset and verify if the STD is gone...
I hope help you

Fidalgos said:
I think is one problem with this name STD (sleep to death). Read about this on this http://forum.xda-developers.com/archive/index.php/t-256494.html and I post the file. Read also this:
- Backlight light can't turn on after sleep mode
- STD
About DisablesyncSchedule:In WM5/6, activesync connects automatically time to time (even if device is turned off), and would cause STD, specially with SD Card inserted.
DisablesyncSchedule.cpf Install procedure:
Copy DisablesyncSchedule.cpf to your device
Run DisablesyncSchedule.cpf (using File Explorer on your PPC). It will show:
"Device Settings Changed".
Then Soft-Reset and verify if the STD is gone...
I hope help you
Click to expand...
Click to collapse
this definitely sound like my case.....will give it a go...thx....

hmmm....dont know if it work....i click the file....only flashes....no other indicator that it ran.......

dont think it work....cuz it just die out again

It will show:
"Device Settings Changed".
Click OK on the message (to go out... and another OK on the X button) then Soft-Reset.
I have in the past this problem with WM5 (Eten M600 device) and with HTC WM5 but with this method no more STDs on this devices.
Look if your battery is under 20%. With the ROM you flash I have an STD also and I see my battery is low when I do a Soft-Reset. So... when charged up >20% never more an STD.
Regards
*** maybe you need try a CUSTEL ROM (cingular or standard version) or Schaps ROM no problems for me with this two. Now I stay on Schaps 3.30b WWE but I wait for the upgrades Schap's and Custel (maybe to this sunday). I try also Faria ROM but I have problems (I dont remember) but I remove on the day after... like Shadow (very nice the aspect but for me no video-call and I dont like the combination sms/mms so... I reflash with Schap's and I wait to compare the new upgrades promised for this week-end).

Fidalgos said:
It will show:
"Device Settings Changed".
Click OK on the message (to go out... and another OK on the X button) then Soft-Reset.
I have in the past this problem with WM5 (Eten M600 device) and with HTC WM5 but with this method no more STDs on this devices.
Look if your battery is under 20%. With the ROM you flash I have an STD also and I see my battery is low when I do a Soft-Reset. So... when charged up >20% never more an STD.
Regards
*** maybe you need try a CUSTEL ROM (cingular or standard version) or Schaps ROM no problems for me with this two. Now I stay on Schaps 3.30b WWE but I wait for the upgrades Schap's and Custel (maybe to this sunday). I try also Faria ROM but I have problems (I dont remember) but I remove on the day after... like Shadow (very nice the aspect but for me no video-call and I dont like the combination sms/mms so... I reflash with Schap's and I wait to compare the new upgrades promised for this week-end).
Click to expand...
Click to collapse
program didnt run.....do you have another file or something....or the code...or regedit thing.......will probably try another rom.....

Fidalgos said:
It will show:
"Device Settings Changed".
Click to expand...
Click to collapse
I finally found this msg....and it didnt pop rite out.....guess where i found it.....in my sms mail box....lol....the phone didnt die yet......usually die within a min before....have to see for long run.....

bure82 said:
I finally found this msg....and it didnt pop rite out.....guess where i found it.....in my sms mail box....lol....the phone didnt die yet......usually die within a min before....have to see for long run.....
Click to expand...
Click to collapse
Mine too... Is it finally the END of the F_n STD thing... praying...

bure82 said:
I finally found this msg....and it didnt pop rite out.....guess where i found it.....in my sms mail box....lol....the phone didnt die yet......usually die within a min before....have to see for long run.....
Click to expand...
Click to collapse
YES I remember now... the message go to mail SMS, sorry for my bad explanation but shoore you dont have anymore STDs. Save the file I post on your Utils>folder for the future!

ok...after my test for night the std is gone.....but after a soft reset...it came back....

dont do a Soft-Resets... LOL try this... upon click on the file I post... move to your sms inbox...one click on the message to open until display the message "device settings..." then click on the OK button. Now... dont do a Soft-Reset but... press 3 or more seconds on the Power-off button of your device until appear one warning "Power will be turned off, and you may lose data if.... Do you want to continue?", Press YES. Your device power-off and save your settings.
ok... wait a litle and press the power button 2 or 3 seconds and you see the startup OS (like you put your stylus on the whole when you do a Soft-Reset) but is different.
My friend... make one more try and if no have a good result now... buy another device, LOL, sorry... change your ROM.
I hope @SaarAvigour say something about your experience upon a Soft-Reset.

will try....i flash the custel rom.....havent std on me yet.....but....i think all device will have the same problem if microsoft dont fix this.....lol.....i just bought this tytn....used it for less than a week.....

std is kinda gone.....std on me this morning.....but less often now.....another problem now is that the phone freeze on me if i click too fast or sometime when syncing with the comp....have to be very careful now.......

Related

Few crossbow issues

After upgrading my exec to latest PdaViet rom I've noticed few annoying things.I looked for the solution but couldn't find any.
1)How to permanently turn off word completion suggestions?Every time I turn it off,after a soft reset is on again.
2)Green and red button on the side don't work properly.For example I can answer the phone call but can't hang up using them.
3)Has anyone found any solution to the decreasing memory?
I'm back to the universal forum after a year of using a Wizard so please forgive me if any of these issues have been addressed before.I've spent last two days reading the forum and couldn't find the answers.
rottie said:
After upgrading my exec to latest PdaViet rom I've noticed few annoying things.I looked for the solution but couldn't find any.
1)How to permanently turn off word completion suggestions?Every time I turn it off,after a soft reset is on again.
2)Green and red button on the side don't work properly.For example I can answer the phone call but can't hang up using them.
3)Has anyone found any solution to the decreasing memory?
I'm back to the universal forum after a year of using a Wizard so please forgive me if any of these issues have been addressed before.I've spent last two days reading the forum and couldn't find the answers.
Click to expand...
Click to collapse
I dont have any issues with this ROM. Works fine with my O2 XDA EXEC. Memory upto 28 mb
dineshh said:
I dont have any issues with this ROM. Works fine with my O2 XDA EXEC. Memory upto 28 mb
Click to expand...
Click to collapse
Have you tried disabling the world suggestion and sof reset?
Also I know that it starts with 28MB but try to check it after one day of using without a soft reset...
rottie said:
Have you tried disabling the world suggestion and sof reset?
Also I know that it starts with 28MB but try to check it after one day of using without a soft reset...
Click to expand...
Click to collapse
I have to agree with dinessh. No problems on my part regarding memory management.
Is there a fix to get sound sback on the start menue?
Windowsrookie said:
Is there a fix to get sound sback on the start menue?
Click to expand...
Click to collapse
Check Jwrights thread... there's a registry fix for sounds.
That thread is like 80 pages long.... lol
Windowsrookie said:
That thread is like 80 pages long.... lol
Click to expand...
Click to collapse
I was wrong anyway... it's on Helmi's 1.1 thread.
Lil tip, if you click on the paper clip icon to the right of the thread, it'll bring up all files that have been posted within that thread, saves searching
Wow, didn't know that. That helps alot! Thanks!
i did also notice the memory leak....
my suggestion would be to disable voice command....remove the link from windows/startup
made a huge difference....what problem do you have with word suggestion
fallenczar said:
i did also notice the memory leak....
my suggestion would be to disable voice command....remove the link from windows/startup
made a huge difference....what problem do you have with word suggestion
Click to expand...
Click to collapse
The only thing in my startup folder is Pocket Outlook...
With the world suggesting, I just want to turn it off permanently. But everytime after soft reset is back on again
Sorry, duplicate post.
fallenczar said:
i did also notice the memory leak....
my suggestion would be to disable voice command....remove the link from windows/startup
made a huge difference....what problem do you have with word suggestion
Click to expand...
Click to collapse
I have voice command on my startup folder and I don't have the memory leak. Actually, I have a total of 8 apps already in there.
small menu (modified to launch from windows folder)
handy menu (modified to launch from windows folder)
spb services
voice cmd
poutlook
BTIcon
Start Menu Cleaner
X-CPU Scalar
I also have a total of 6 today plug-ins:
Phone Alarm Lite
SBSH Clock
Pocket Weather
iLauncher
Windows Media Plug-in
Calendar
The last time I performed a soft reset was yesterday after installing some apps and making a backup. I'd say I used my phone for 2 hours, listened to music for 1 hour, watched a short movie, browsed the net for 30 minutes, updated Eggress, and used Pocket X PDF. Tonight, I left active sync connected via BT so pocket weather will update every 3 hours. Always after a soft reset my total memory is 24.7MB, with all the activities I mentioned from above, my total memory was down to 19MB. I used MemMaid to Restore RAM and I recovered only 200kb. I then used Hibernate, and I got more than 1.5MB. So right now the total memory for the whole day of use is 21.1 MB.
I agree that some apps are memory hungry, but I always get a huge chunk back after Hibernate was activated. I always get back up to the upper 20 MB.
@rottie
To disable word suggest permanently edit register entry:
hklm\controlpanel\sip\suggspell=0

HERMES Auto suspend fix

There is a peculiar problem in hermes(the best device ever made). Some times the phone led (green) blinks where as the display is off and it fails to start up even if u soft reset.
in the meanwhile if some one calls u he will get a ring but u wont be notified by ur device
this will make the person calling think u r avoiding him
this is the perfect solution tried on atlest 50 hermes
Plz install the following cab then switch off ur device then switch it on again and wolla the sleep to death problem is gone
Take care
HTC zindabad (i.e. long live HTC)
Guess you forgot the cab?
Edit: Ok, here it is now ;-)
Anyone tried this???
To be honest: I find it a little hard to believe: threads all over the place about this SOD. All chiefs searching and searching for the solution.
And now in your first post you have the solution?
Hope it's its true...
Could you please give us some more information than "this is the perfect solution..."?
How does this patch work? any technical detail as to how this fixes the issue?
Great if it does but a little skeptical without any detail?
Cheers
Lee
nittin_sp said:
There is a peculiar problem in hermes(the best device ever made). Some times the phone led (green) blinks where as the display is off and it fails to start up even if u soft reset.
in the meanwhile if some one calls u he will get a ring but u wont be notified by ur device
this will make the person calling think u r avoiding him
this is the perfect solution tried on atlest 50 hermes
Plz install the following cab then switch off ur device then switch it on again and wolla the sleep to death problem is gone
Take care
HTC zindabad (i.e. long live HTC)
Click to expand...
Click to collapse
I agree with pietrucci,
please ... Anyone tried this CAB? we need our forum seniors & moderators answering us.
Thanx for your efforts nittin_sp, and hope it's truly works.
pietrucci said:
Anyone tried this???
To be honest: I find it a little hard to believe: threads all over the place about this SOD. All chiefs searching and searching for the solution.
And now in your first post you have the solution?
Hope it's its true...
Could you please give us some more information than "this is the perfect solution..."?
Click to expand...
Click to collapse
To tell you the truth I have never been able to reproduce the SOD problem whatsoever. I still can't figure out what the heck is causing it.
Anyway, if you doubt nittin_sp, maybe you should tr it yourself and see if it solves the problem.
This was rather uncourteous...
Kevlar-Source said:
To tell you the truth I have never been able to reproduce the SOD problem whatsoever. I still can't figure out what the heck is causing it.
Anyway, if you doubt nittin_sp, maybe you should tr it yourself and see if it solves the problem.
This was rather uncourteous...
Click to expand...
Click to collapse
Didn't mean to be uncourteous...
SOD
IN my whole 6 months having my hermes i had never had SOD until i flashed the official dopod rom with matt kitchen. when I traced the source that SOD had came from it was a bad extended rom flash i done. This cause the device to go sleep after the screen time out, and also if i put the phone in idle mode i had to soft reset everytime.
i flashed an original operator t-mobile rom with the extended rom and all my problems went away.
My device has never been quicker no more SOD and battery life is superb with the new radio 1.47 after one whole day with normal use with 3g internet I am still on 70% battery life.
Now I have the perfect device and i think hermes WM6 crave and addiction will be thinned out as there is not much you can do now with the hermes as to wait for PROTON or fully integrated touchflo working ROM.
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
Running new official wm6 no more sod here so cannot verify that it works, but I had alot of sod in various other roms and if this is a solution the senior members/cooks should disect it and figure out what is the real cause of them and what exactly this fixes since they are not so forthcoming.
edit, wait reading it again it says that even soft reset fails to start up, if that is true they are not talking about any sod I have ever had soft reset does what it does resets the device and boots up.
There were many quick fixes trying to figure out the sod problem, sd card issues, active sync turning on etc, maybe this is a cab that does that.
Psiodon
I will try this
I have had SOD's several times a week.
Will try this and get back to you in a couple of days
I find that I have to SRS every morning after not touching the device all night. I have installed this cab and will report back tomorrow about the behavior of the device. It would be wonderful if this actually works. I am keeping an open mind about it.
I don't understand why you're being so mysterious about this nittin_sp. From what I can tell using IDA Pro (sorry, but I am reluctant to simply load something on faith based on "100% fix" claims alone), your patch simply sets the DWORD value "DisableAutoSuspend" in HKLM\SOFTWARE\Microsoft\Bluetooth\sys to a 1. Interestingly, on my TyTN running WM6 this is already set to a 1.
Sometimes its easier to just say this rather then create a cab. That way the rest of the community can work off your findings and perhaps explore this SOD issue better.
If your cab does more than this then please share your knowledge so we can further explore this hermes issue.
ok so I installed this. I've not had any BSOD's since doing so in a 24 hour period, when normally I'm getting them alteast every hour, sometimes more than 1 in an hour. Will report more soon. Would be good if you can post what this does though as I'd like the ROM cooks to build it in.
duttythroy said:
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
Click to expand...
Click to collapse
Hi,
Sorry if this is a dumb question - why do you need to extract the ROM and EXTENDED ROM after flashing the original operator ROM and then flash WM6?
Would it be the same if I just flash the official WM6 and reflash with the cooked WM6?
Thanks!
As promised, I am reporting my results. While I have no idea what this patch is doing, for the first time since I have had this device, I have not had a single failure. Coincidence? We will see in 24 hour.
perlmane said:
As promised, I am reporting my results. While I have no idea what this patch is doing, for the first time since I have had this device, I have not had a single failure. Coincidence? We will see in 24 hour.
Click to expand...
Click to collapse
Well unfortunately I have had the problem happen to me once, and I have larger batter drain than before.
jocool said:
Well unfortunately I have had the problem happen to me once, and I have larger batter drain than before.
Click to expand...
Click to collapse
I have not noticed any increase in battery drain, but I did not use the phone much on the weekend. The reality is, the only time I have the problem is when I do not touch the phone and it goes to sleep. When it wakes up, there is an apparent memory issue that SRS easily resolves. But, since I have installed this cab, the issue has not reappeared - yet.
yup over 24 hours and no issue... Its looking good.
spoke too soon - still sod... reduced but still present - what does this hack do exactly?
[email protected] said:
spoke too soon - still sod... reduced but still present - what does this hack do exactly?
Click to expand...
Click to collapse
Me too. Mine just failed about 5 minutes ago. Too bad.

Self Reboot? Food for thought

Was just wondering - with all this memory leak issues cropping up - not that I have complaints 'bout it - as mine barely goes down below 20MB...but still...
I would like to have a feature/scheduler - which would reboot my Orbit - when :
a) It reaches a threshold - like 15MB memory or lesser !
b) maybe a time bound schedule - like 1am every morning !
Is there any software I can use to do this?
Nice thought but there is an issue.
What bout pin request? After reboot you have to enter pin for mobile to work. If you don't, you will have no mobile.
I do not think is clever to disable pin request either.
freco said:
Nice thought but there is an issue.
What bout pin request? After reboot you have to enter pin for mobile to work. If you don't, you will have no mobile.
I do not think is clever to disable pin request either.
Click to expand...
Click to collapse
I've heard that one of the backup softwares (maybe SPB) can do a scheduled SR. You can set to 1am to do a SR every day.
You can do a scheduled backup with SPB Backup everyday at 1am.
After that SPB Backup automatical restarts your device...
I dont use a Pin - so thats not a problem....
Well my soft reset issue seems to be resolved...I can use psShutXP to set a Timer schedue and it reboots fine....
Now to find a solution whereby - when the memory goes below a certain threshold - it reboots ! that would be a killer !
Will liv with the self reboot - once a day for now...
devdarshan said:
Was just wondering - with all this memory leak issues cropping up - not that I have complaints 'bout it - as mine barely goes down below 20MB...but still...
I would like to have a feature/scheduler - which would reboot my Orbit - when :
a) It reaches a threshold - like 15MB memory or lesser !
b) maybe a time bound schedule - like 1am every morning !
Is there any software I can use to do this?
Click to expand...
Click to collapse
you can use also this prog name Auto Softreset try search on site
devdarshan said:
Well my soft reset issue seems to be resolved...I can use psShutXP to set a Timer schedue and it reboots fine....
Click to expand...
Click to collapse
Yesterday i tried also with PsShutXP, but does it save the settings after reset ?
As far as i could see, you have to enter the schedule evertime again....?
petervbeck said:
Yesterday i tried also with PsShutXP, but does it save the settings after reset ?
As far as i could see, you have to enter the schedule evertime again....?
Click to expand...
Click to collapse
What the f***
I just tested and the setting went off after reset ! Back to square one !
Well my problem resolved...the scheduler is in XDA-Dev site itself !
http://forum.xda-developers.com/showthread.php?t=294575
This utility RunEveryDay.exe can execute any exe file based on schedules defined...quite appropriate for my case...
I set up a couple of schedules and they executed all in order one by one...the softreset you will need a different exe which does not ask for a prompt...and is attached...
devdarshan said:
Well my problem resolved...the scheduler is in XDA-Dev site itself !
http://forum.xda-developers.com/showthread.php?t=294575
This utility RunEveryDay.exe can execute any exe file based on schedules defined...quite appropriate for my case...
Click to expand...
Click to collapse
Hey dev...looks nice...i was also searching yesterday, but the one i've found did not work....thanks for sharing the link!
I have been using SKSchema, a commercial app, to soft reset my artemis at 6.00am every morning. It is a really cool app but a bit hardcore for my ability. You can make it enter your pin or watch for any event, I think even a memory threshold, but you have to use scripts, which I am finding a bit hard, you guys would not. It can even emulate screen taps or keyboard entries to a schedule. I sound like a crap salesman, But it would be good for my karma if I persuaded someone to buy it!
http://s-k-tools.com/index.html?skschema/m_skschema.html

bluetooth problem - URGENT!

Hey u guys! Ive got a major problem on my tytn. I have a Crc's 10.something last ROM (WM 6.1) and a big BT problem. Ive got it "on" in the comm manager, "on" in windows, both beam options on and that option "allow other devices to see me". Well the problem is that the other devices can only see me if I have the PDA on! I mean, if it is in standby mode, other devices can't find me! It becomes a big problem when I turn on my BT headset and it cant find the phone =(. Is there a way to solve this? maybe editing something on the registry?
try installing schaaps config and turning off all the power save settigns
nothing m8. No can do! everybody else can find their Hermes in standby mode?
anyone know a registry tweak for this?
Solved by removing those saving power options in advanced config
Quit spamming the forums.
Spr0ckEt said:
Quit spamming the forums.
Click to expand...
Click to collapse
actually it didn't work. the bt doesn't go off when I put the device in standby, it takes about 3 or 4 secunds to turn it off... anyway I don't know what to do...help
Have you tried reflashing? I'm using 10.8 and it has no problems at all when it is in standby and a call comes in, or I start a call from the headset while the phone is still in standby.
If it worked briefly by changing the power settings, try doing that, then delete and recreate the partnership before doing anything else, that might work more reliably.
Yes, i already flashed 3 times! But all the ROMS come with power tweaks! My radio rom is 1.48.00.10 e I dont know if it has anything to do with... Its only the BT problem, i can receive calls and messages, everything works! Im using 10.8 either!
another thread!
you are a kind of hopless my friend
whenever you get any problem on your device, and before you try to understand what kind of problem you have, you open your mouth speechlessly, and you go directly "Hermes Mobile 6" instead of "Hermes Accessories" to post a new thread and ask a very sweet sweet question
Advice: UPGRADE -or whatever you may call it- to Nokia, SE, Sagem, Motorola or any non WM based device and forget about all these problems
That's the way it is - if it in standby, BT is off.
No fixes, patches or anything will sort it as that's just the way it is.
Sorry!
Lordsmiff said:
That's the way it is - if it in standby, BT is off.
No fixes, patches or anything will sort it as that's just the way it is.
Sorry!
Click to expand...
Click to collapse
Im not sure thats right because I also have an HTC Prophet and Wizard and they can both be discoverable on standby mode! If it wasn't a possibility then why should the blue led blink in standby mode?
Feel free to disbelieve me and waste your time searching for a solution.
You asked, and I answered.
What you do with the answer is up to you.
Lordsmiff said:
Feel free to disbelieve me and waste your time searching for a solution.
You asked, and I answered.
What you do with the answer is up to you.
Click to expand...
Click to collapse
i now see this is an all hermes issue that hasnt yet been fixed.
Although there are some registry tweaks. Does anyone know of a good one to force the BT to stay on even in suspend mode?

[Solved] TP2 won't wake after 2 weeks on same ROM; 'sleep of death'-style

So I've been using the same ROM (in my sig) on my T-Mobile TP2 for 2 weeks now. Last night I tried to wake my phone (it was on for 8 hours already; being used 4 hours prior to make a PowerPoint using JetCet Presenter 5), and the phone wouldn't wake up. I pressed the soft reset button on the side, and everything was fine. I pressed the power button again before I put it in my holster. Ten minutes later, I pressed the power button to wake it, and it wouldn't wake up again! I did the soft reset thing, and battery was down 5-10%, so I know the phone was on the whole time.
I did a hard reset, and still had same problems. I was going to return it with warranty, so I flashed the stock T-Mobile WM6.1 ROM and everything was fine (I couldn't replicate any of my problems). I went to a different ROM (the latest Valkyrie Leo 23815, I believe?), and I got the same "can't wake" problem.
Now my real problem is the fact that I can't replicate it on the stock ROM. I think it's not the custom ROM because I've used the same one for 2 weeks. I don't know how I can get a warranty swap in this situation... It's not like I can say "Look, I have your stock WM6.1 ROM and it works. How come it can't work with a custom ROM?!"
*I confess I did just download the JetCet Presenter5 cab from these forums just two days ago. I made a PPT (as stated in the first paragraph) for a class and I saved it on my SDHC card. It was working afterwards, but the "can't wake" problem only occurred 4 hours later, and still persists after the hard reset.
Can I please get any help here? I really need a working device with a custom ROM and I don't know how to do a warranty swap in this situation.
Thanks.
SOLUTION: post#19.
(I replied this also on TmoNews forum)
What do you have to do create this problem...just wait and it happens eventually? Or does it happen right away the first time it goes into standby, or you put it in standby? Or is there a specific sequece of events?
How long did you wait after flashing the stock WM6.1 to see if the problem came up?
Maybe you could try flashing the "hidden" official WM6.5 rom...just on the chance that it might fix/delete whatever is wrong. Or it might show the problem so you could return it...after the Jan-20 official release.
Good luck
MCbrian said:
(I replied this also on TmoNews forum)
What do you have to do create this problem...just wait and it happens eventually? Or does it happen right away the first time it goes into standby, or you put it in standby? Or is there a specific sequece of events?
How long did you wait after flashing the stock WM6.1 to see if the problem came up?
Maybe you could try flashing the "hidden" official WM6.5 rom...just on the chance that it might fix/delete whatever is wrong. Or it might show the problem so you could return it...after the Jan-20 official release.
Good luck
Click to expand...
Click to collapse
(Replied this on TmoNews, but this might help others willing to help out)
On the custom ROMs, the first time it goes into standby, I can't wake the phone anymore and I just noticed that it won't recognize the USB cable (no charge from the outlet; no sync with the PC). If I soft reset and prevent it from going to standby, everything's normal (even the USB problem).
I flashed the stock WM6.1 ROM one hour before my first post. Everything is fine except for the annoying old Start Menu and the small, non-finger-friendly buttons!
I'll try the "hidden" official ROM now, just in case. I just don't know how I'll survive without WM6.5.x until after the official release date!
Thanks! I'll need the luck.
...So I think after all the testing I've done, and the weird problems others have posted [in various threads], I believe the problems I've experienced were a result of the new Sense2.5 build 1922 ROMs.
I just flashed the old EnergyROM Dec.4 Leo 28008 (Sense2.5 build 1921) and the problems are no longer present.
Newbie to WM!!!
Having similar Problems with my TP2. My phone has had several "wake up" probs since I have the phone. I installed directly after purchasing the WM 6.5 ROM directly from HTC-support (german). My real problems are right now that my alarm clock is not working properly (sometimes it works, sometimes not) and my phone often does not wake up after stand-by. Last night watched the clock at 04:30 and almost got problems caused by a non working alarm clock... (phone was connected to power supply)
anyone knows more about it? Is it a bug? user faults?
additional added software: Brians Task bar, Mort-player and powerbutton 12.
Just wanna get sure, that the phone is not damaged from hardware's site (warranty)...
Well.. I have (in this days) this problem.. It seems that it's getting worst day by day.
First of all: I've never used a "cooked" rom!
I had the original HTC rom (6.1).
I had this problem so I flashed the 6.5 update and it magically was solved!
Everithing was fine till 4-5 days ago: I can't understand what is the problem..
But I had only one time an "alarm problem".. But maybe was my fault..
I don't know what is the problem but it is NOT related to "cooked rom".
The worst thing is that RADIO MODULE IS ON!
So people call you, write you.. AND THEY KNOW YOUR PHONE IS ON!!!!!
This is totally unacceptable!!!
I would try a coked ROM.. But, as I can read, it would be useless..
And anyway: What is the most STABLE ROM in this jungle?
I'll write to italian HTC support.. I don't know if they will solve anything..
To: chrizz.o and DJ Palmis
chrizz.o: The alarm clock in WM is unreliable sometimes. You could download a 3rd party app alarm clock like Klaxon or G-Alarm.
DJ Palmis: You could also download an alarm app (see my response to chrizz.o). I don't know if you're talking about you can't turn your screen on after it goes into standby (my problem).
I don't know if you guys are confused but my problem is: I can't turn on the screen if the phone goes in standby (screen goes off). The phone is still on, but the screen is permanently off. This only happens to me in the new custom Leo ROMs. It doesn't happen in stock ROMs or old custom ROMs, so I cannot return it.
DJ Palmis, I don't know why it's happening in a stock ROM. You can try a hard-reset (wipe device) by pressing/holding Power button, Talk/Send key, and End key at the same time when the phone is off. That might help. If it doesn't, return it to HTC.
BTW, I think the most stable ROMs are the EnergyROMs, ValkyrieROMs, and the Rhodium_AF (ark666) ROMs.
Same issue w Att Tilt 2
I'm experiencing the same issue, occasionally the screen won't come on from standby when I know the phone is on. It shipped with 6.5 and it remains with the stock rom.
The issue is so hit-&-miss that it is difficult/impossible to trouble shoot.
sumflipnol said:
chrizz.o:I don't know if you guys are confused but my problem is: I can't turn on the screen if the phone goes in standby (screen goes off). The phone is still on, but the screen is permanently off. This only happens to me in the new custom Leo ROMs. It doesn't happen in stock ROMs or old custom ROMs, so I cannot return it.
Click to expand...
Click to collapse
I think we have the same problem, indeed. And i don't want to hard reset because i did not change anything in the last weeks.. I'm only using my phone more frequently.. So more text messages, videocall and so on..
But this does not justify this problem.
It would be nice to know what happens during this "freeze".
Maybe it is related to notification queue (that's why a new rom "solves" problem for a while)?
Well.. Anyway I had this problem on my old HTC Universal.. So it is related to WinMobile or Qualcom..
when i had a issue similar to that. i just hard reset my touch pro and flashed a whole new rom. and hard resetted again and i was bug and error free.
charlieb620 said:
when i had a issue similar to that. i just hard reset my touch pro and flashed a whole new rom. and hard resetted again and i was bug and error free.
Click to expand...
Click to collapse
The OPs issue must be a little different.
He tried flashing several different roms -- stock and custom -- and only the stock T-MoUSA WM6.1 or WM6.5 roms or custom roms that were a month or two old would stay "fixed".
sumflipnol said:
chrizz.o: The alarm clock in WM is unreliable sometimes. You could download a 3rd party app alarm clock like Klaxon or G-Alarm.
Click to expand...
Click to collapse
Cheers for upadating me. Appreciate it. Will try another alarm clock in a while. BUT: I use mort's player as an additional "alarm", as well, and even that does not work propperly. Might be, that it is no real alarm clock. strange and weird.
But it is good to know, that the "will-not-wake-up" problems are more or less known by several other users. I almost thought it is my stupidity to use a win mobile phone *lol*
Does anybody know, eventually, if there's a more stable rom (maybe with the new manila like on HD2) for germany which might solve the freezing problem?
thxx for updates
I'm also getting will not wake problems on the leaked official TmoUS WM 6.5 Rom. I would get it about twice a day. My stock tmobile US 6.1 never had this issue.
A fix that works for me:
Change the power settings to always on for a like 10 minutes and put the default settings back. You would have to do this after every soft reboot.
HTC Italy told me to set Band selection to auto (booth choices) and to change network selection (auto if set to manual or manual if auto) and then they told me to soft reset by button.
I'll write you if I have news.. But i think they know something more than us about this problem. And they are on the way of solving because i noticed that this problem happens in bad quality signal areas and ALWAYS when phone is ON.. So it is related to radio module.
I think it may be related to SIM card, too.
Because they told me to change SIM.. And at last to do an Hard Reset..
Maybe my 3 card is not fully compatible with my radio version?
Hey,
thxx for the updates. Indeed, I have quality differences in our flat, bandwidth switching between HSDPA, 3G and GPRS, depends on, in which room I am.
Asking HTC Germany about this problem, they told me, it is a not known issue. The more I follow up here, I cannot believe that.
Do you really think, it may also be caused by the SIM-card? Mine is about 2 years old (VF GER).
chrizz.o said:
Do you really think, it may also be caused by the SIM-card? Mine is about 2 years old (VF GER).
Click to expand...
Click to collapse
Mine too!
What I know is that i had this problem on my old HTC Universal... So maybe problem is not in the "age" of SIM card.. But in some technical compatibility between SIM and Qualcom.. (You know: 64 KB, 128KB and so on..).
Maybe Qualcom has some problem on european SIM card? I don't know..
DJ Palmis said:
I think it may be related to SIM card, too.
Because they told me to change SIM.. And at last to do an Hard Reset..
Maybe my 3 card is not fully compatible with my radio version?
Click to expand...
Click to collapse
I read somewhere in a ROM thread (I don't remember exactly where) that some people are experiencing constant freezing on their phones after a few weeks of use. Someone recommended taking out the SD card because it might be corrupt, and that interferes with the phone's performance. Some people said it worked; they found out their SD cards were actually corrupt, and using a new one made the phone function well.
Having used ValkyrieROMs before, I remember a pre-installed app (I forgot the name) that let you format your SD card. When I tried it (even after I formatted my SD card to FAT32 on my PC), the app said my SD card was corrupt and cannot be located. The last time I used the app was 1+ months ago. I think I'll try to flash a ROM without the SD card when I have time.
...But I still don't know how the SD card would give me a problem with a (new) ROM that I had on my phone for 2 weeks...and no problem on an older ROM (that I have now)...
sumflipnol said:
SD card because it might be corrupt,
Click to expand...
Click to collapse
Well I don't know, What I can say you is that till now i have no problem with HTC istructions.. Maybe i solved.. I hope..
SOLUTION!!!
I finally got my phone working with new ROMs again!
It was the SD card! I connected my TP2 to the PC as a "Disk Drive" and I went to My Computer > [right click] Removable Storage (SD card) > Properties > Tools > fix... something something (I can't remember exact words). It fixed the corrupt SDHC card I have; now my phone is working again!
This might help you, too, DJ Palmis...
Just had done this right before the last freezing-problem. My SD-card was not corrupt, so this did not solve my problem.
At least I swapped my SIM-card, made another hardreset and checked my SD-card again. Let's see what's happening...

Categories

Resources