Develop Bugs

.:: HELP Appreciated ::. Universal - WHITE SCREEN Problem...

.:: HELP Appreciated ::.
Hello Tech GURUS,
I returned from a long tour (I kept my XDA EXEC at home) & found that my XDA EXEC has got a problem of WHITE SCREEN!! Nothing is Displayed!!
May be brother's childrens or anyone of my friend accidentally did it in my absence(Sorry I'm NOT Sure). May be they pivoted (Turned) the screen in a WRONG DIRECTION!
That doesn't matter WHO DID IT, But the problem screwed my head & I started to trace the problem.
Symptoms:
1) Only WHITE SCREEN(with LCD Backlight), Nothing Else.
2) Charges perfectly through USB & also from Charger.
3) When I connects it to ACTIVE SYNC, it Syncs fine & I can able to explore the files/folders. Copy from & to the handset memory is also works fine.
4) Tried to enter into BOOTLOADER Mode(by pressing Light+Power+Reset), there also got a BLANK SCREEN (NO LCD Backlight).
5) TOUCH SCREEN detects TAPs & make sounds (Tick Tick), That indicates Touch Screen Working fine.
6) Qwerty KeyBoard Works fine. I don't know at what extent, since I can't see nothing on screen. But when I press a key on QWERTY Kbrd, it sounds Tick.
7) Transfered(Beamed) a CONTACT from my another XDA IIi & found Its accepted the beamed data.
8) Volume Up/Down make sounds (Tick, Tick...).
What I Did:
1) Removed the Battery & re-inserted & tried to BOOT it. NO result, just a WHITE SCREEN.
2) Purposely Tried to Rotate the Screen in Wrong Direction to test the loose contacts of co-axial cable.
3) Lastly Dis-Assembled the whole handset (Removed all parts 100%) & Re-Assembled it. But the Problem remains SAME.
4) Dis-Assembled again & this time I tested the LCD Co-Axial Cable's connectivity from MainBoard side connector to LCD Side Connector. There are 2 Cables which connects to LCD. One is 30 Cores Cable & Second one is 40 Cores Cable.
I Successfully tested 30 Cores Cable(Actually it used only 28cores cable, remaining 2 points at connector are DUMMY) & Second 40 Cores Cable I'm UNABLE to Test Since I lost my patience while connecting my Testing Meter to Hair Line sized cores & in just an 10mm connector got 40 cores!!!
5) Observed all cores which passes through SCREEN ROTATOR BASE Hinges & found there is NO physical Damage or CORE CUT.
CAN ANYONE HELP ME TO SOLVE THIS WHITE SCREEN PROBLEM?
IS IT A HARDWARE BASED PROBLEM? OR SOFTWARE BASED?
IS IT A PROBLEM WITH DISPLAY CHIP(IC) ON MAINBOARD?
JUST CONFUSED & SEEKING HELP FROM TECH GURUS.
THANKS IN ADVANCE.
HellCrusher.

Hi hellcrusher,
CAN ANYONE HELP ME TO SOLVE THIS WHITE SCREEN PROBLEM?
IS IT A HARDWARE BASED PROBLEM? OR SOFTWARE BASED?
IS IT A PROBLEM WITH DISPLAY CHIP(IC) ON MAINBOARD?
Click to expand...
Click to collapse
This seems to be a hardware problem. Check connectors in the display housing first. This unit is quite easy to disassemble.
Before you start, you should have a look in the universal SERVICE MANUAL to check out how it gets torn apart .
If all connectors to the display are right in place, but your display still shows nothing ...open the universal body too.
Folow the steps in the manual
Regards,
scholbert

White Screen
Hello, this is my first post. May I first just say how great I think this site is, the guides on here really are useful to beginners.
With regard to the white screen, not sure if this helps, but during dismantling of my various PDAs, I managed to connect an LCD ribbon incorrectly, I kind of forced it in & folded one contact over, resulting in white screen. Disconnected, straightened & refit. Hey presto, works like a charm. Hope this helps.

I had the issue, had to buy a new flat cable
It is rare to actually see the damage to the cable, because the damage is inside the insulation....
Best regards!

On the topic...
Hello!
I have a similar issue with my Orange SPVm5000, except that mine will work for up to a minute after a hard reset before going to a white screen.
If I hard reset pressing the left+right+reset keys, the device shows the boot screen and sometimes ever goies into the initial setup but then all of a sudden it goes white. I've opened up the screen and verified and reconected all connections but still the problem persists. Also I've noticed that its not any action I make that causes it; more like a heat/timing issue. Per advice above, I will check the connections in the body but does anyone have any other ideas?!?
Thanks!
Greg.

I have a similar problem. The story;
I purchased an orange branded M5000 on flebay described as second hand in fantastic condition blaa blaa.
When the phone eventualy turned up it had no manual, the outer sleeve of the box was missing and the wrong usb cable was supplyed (one of those larger usb plugs you usualy get for printers.
I have shedlooads of cables and rely wasn't bothered about any of these problems at the time and went about charging the phone (it was totaly flat)
When fully charged I stuck my sim in and poweded her up the phone works fine in portrate and landscape view but as you rotate the screen so it is inline with the keyboard the screen fades to white about half way.
I contacted the seller who basicly told me the phone is second hand so sold as seen!?!?!?
I have flashed various roms on it to see if it was a software fault but nothing.
I think this phone had been in storage as its battery was totaly flat and incorrect accessories suggest the seller didn't check it before shipping. So I believe there is a problem with this phone that occurs when stored.
Sorry for the long post

Have you flashed any rom or just had this problem ...
my conclusions:
1. If you have flashed a new rom to your universal, try to reflash the original rom, it works for many users.
2. If you havent flashed any rom, maybe its a hardware problem.
2.1 If you just used it in a bad way, (ie: rotate screen in wrong way), dissamble it..
2.2 If you have let it on a heat, weat, etc.. place.. maybe the mainboard got a cut-circuit.
Saludos

I tryed a couple of popular WM6 roms (I forget whitch ones) and returned to the genuine Orange WM5 rom. So I doubt its a software fault.
As far was extreme conditions go the phone was well packaged when posted I will gove that to the seller SO unless the eposure happened before shipping I don't think thats to blame ether.
I think the wire in the swivle joint is failing and will continue to get worse as the joint is exercised.

Try to clear it up..
Hi there,
i made a lot experiments with the uni, so let me try to focus what's wrong:
First LVTato's Orange SPVm5000
...
If I hard reset pressing the left+right+reset keys, the device shows the boot screen and sometimes ever goies into the initial setup but then all of a sudden it goes white. I've opened up the screen and verified and reconected all connections but still the problem persists. Also I've noticed that its not any action I make that causes it; more like a heat/timing issue. Per advice above, I will check the connections in the body but does anyone have any other ideas?!?
Click to expand...
Click to collapse
Sounds like the image could not be loaded completely.
The framebuffer is initialized correctly after cold boot, but afterwords booting into wince fails.
So maybe it's pure software issue (flash content is corupt -> image is broken).
Other possibility: Some region of your flash is damaged (more hardware related).
jahshappybus' Orange SPVm5000:
...
poweded her up the phone works fine in portrate and landscape view but as you rotate the screen so it is inline with the keyboard the screen fades to white about half way.
Click to expand...
Click to collapse
Looks to me like a typical cable issue. Maybe someone twisted the screen the wrong way!
So this is what i guess at least.
Regards,
scholbert

White screen
99 % of these white screen faults is a typical cable issue. And you don't have to twist your screen wrong way to have this problem, also.... just twist it too often First you have to see if the device is working, apart the screen.... call the number of your phone see if it is just screen related problem. Broken display cable will leave your device oprational, you just don't see the image.
I know it is "less painfull" for people to think it is a software problem.... (The "it would not happen to me" syndrome ) but sometimes things just brake, and moving parts are most risky...
The fact you don't see the damage is of no importance due to the size and nature of the damage. Don't expect to see broken wires in the cable. And even if you check the cable by you instrument, somethimes it will show you it's ok, but in some positions it will loose contact.
Try a different cable... that way you'll be sure.
Best regards, and all the luck!

"Looks to me like a typical cable issue. Maybe someone twisted the screen the wrong way!"
I agree and luckily, finally paypal do as well.
It is being boxed up to a red faced seller as we speak.
A happy ending for me (speaking to soon?)

i hav the same problem as u "HELLCRUSHER" and i flashed also but was not able to cure
still hav this white screen ..

Found this link for some where selling the screen cable assmebly.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300254338133
Hope this is of use.

Artemis white screen + screen shaking problem

hi all gurus,
my artemis recently got a white screen of death..
symptom
- the whole screen slowly becomes white
- will happens especially in hot (outdoor, noon time, or when loading big programs)
- the phone itself is noticeable hotter than normal when white screen happens...
- need to unplug the battery in order to restart.. soft-reset wont work when screen goes white..
- at early stage, still can connect to pc and flash new ROM, but now, cannot connect to pc already (pc just wont recognize it)
- the screen is seems to be shaking left to right all the time (a noticeable extra 5 pixels appears on the left most border of the screen, and the goes disappear, repeatingly)
- have already replaced a stable and clean ROM at the stage were the ppc still can connect to pc (i use the ROM before for few months, no problem)
- have try to switch on with a new battery, problem remains..
- battery drains quickly...
does anyone face this kind of problem before? it is hardware problem right? i search on the time, some says is the CPU need resoldering, some says need to replace the LCD ribbons... but the unfortunately things is, no pda repair expert near by area...
any feedback is apperciated. Sorry if my english grammer is not so good.
thanks.

i have the same problem...
i have bought a new battery and it still happens.
I now only get the following on boot:
IPL: 3.04.0001
SPL:1.11.0000
GSM: 03.08.90
I don't get the fourth one and it no longer loads - does this mean that the os is fluffed..?

Had the same problem, hard reset solved it

I have like this proble in my p3300
anyone can help us ??

oman_jeep said:
I have like this proble in my p3300
anyone can help us ??
Click to expand...
Click to collapse
Hi...
I had the same prob. as in first post here...with my aretemis.Tried to fix it (after i ve read sh... load of threads) by heating up board and CPU (I was pissed so I just wanted to destroy it) and I managed to do so.
Now I get only red led when it is con.to PC.
After that I found post of some guy from ROMANIA who claims that he managed to fix it by one of these:
1. reheating CPU
2. changing CPY clock crystal
3.(I can't recall third thing, but it was hardware too)
After that I went on eBay, got a better one and now I'm happy with my new artemis,plus I have spare screen battery etc..in case I damage it somehow...
Ah yes...before I tried to f...(fix) it, I found that my warranty is expired for 1 month....so you can imagine why i lost my patience.
i know this will bring you down,sorry,but I had the same symptoms...
now I'm changing custom roms to see which one fits me, and still i get amazed with this beautiful phone....
cheers,
Z

Looks like a general problem with no fixes/solutions to be found anywhere.
My solution:
Get rid of this HTC sh!t and roll back to Motorola...

Found a solution!
Still being under manufacturers warranty, I took it to the repairs agents, they replaced the motherboard and voila!
Never blame a WSOD on software...

Screen died?

Last night I was out and during the night I pulled my desire z out of my pocket to find that the screen was dead, the soft touch buttons were still lit up and working but no display. I pulled the battery and tried to reboot and no luck, you can hear it booting and even unlock/receive calls and txts etc once it has booted up just the screen stays blank the whole time so have to do everything on feel.
Essentially does this just mean my screen has a hardware fault? is it worth trying to fix? I assume the only option would be to purchase a replacement screen and dissemble and reassemble it?
(warranty is not worth it as I live in New Zealand and would have to send my phone back to the UK where I bought it from, also I have dropped it quite a few times so probably voided anyway...)
Thanks in advance for any input

Does it never display anything? So not even a flash during boot or something?
Because then it is probably a hardware problem.
Since the soft touch buttons do still work I think there might be a little crack or something in the flat cable that connects the bottom half with the top.
Maybe you could check whether you can see if the cable is broken or not?
The best thing to do then is to look for a replacement and try to fix it yourself or bring it to a shop where they can do it for you.

No it never displays anything, completely dead the whole time. The touch input is still working though as I answered a phone call this morning on it by making the usual gesture just without being able to see anything. Doesnt seem to be anything wrong with the cable itself as far as I can see. Yea might have to get someone to have a look at it.

My phone is acting the same. I dropped my phone in the pond before, but pulled battery out on time and had it in rice for a day. My phone was still working for about two weeks after that incident. I dropped it and had one little crack at the top of the screen and about a week after that it died when I had a water balloon fight with the phone in my pocket. D;
Do any of you know if the replacement lcd screen/digitizer for the Desire Z would work for the G2?

I had the same thing happening to my G2 screen, only it was intermittently working for a little while, then just completely died and wouldn't work. It was doing this crazy flickering thing then the back light wouldn't go on at all. If I held the phone at a certain angle in the sun, I could see that the pixels were indeed working on the display, but there was no backlight to make them normally visible.
So I purchased a replacement screen from ebay and carefully followed the directions on a youtube video for a G2 take apart. Its not a hard task to take apart and get down to the screen itself. It was rather easy. After putting it back together the screen still didn't work! Sounds work, i can also receive calls etc. But the screen still doesn't work!
Is there any way that this could be a software issue?

Oh and PS, I believe the LCD replacement would work for both the desire Z and the G2. They are identical phones after all right? I'd say its a safe bet. The screen I bought was only 35 bucks. Didn't think that was a bad deal.

Another dead screen or something else?
Few days ago my phone fell of the couch onto a rug - no big deal, so far it has survived much worse, but when I picked it up, the colors were all messed up - overly green and red. Tried restarting - no luck. Everything worked fine, except the colors, but then the screen turned of completely. I could hear notifications, phonecalls, but the screen was dead. After some tapping on the screen, it turned on again - with ****ed up colors. Then started flickering and was gone again. Few more times I could turn it on by tapping before it was dead for good.
Figured, after all these drops it survived, maybe the screen connector is a bit loose. I mean, I could sometime get a contact when tapping it, so I dissasambled it completely, secured all the connection, put it all back tougether and fired up - same thing: dead screen, phone working.
Has anyone had such problem before? Is it screen that is dead, or connector or... I have no clue... I would like try to fix it on my own, with some replacement parts I could get on ebay - but, what gave?

I think I destroyed my HTC One X

Hey guys,
I think I destroyed my HTC One X. I just bought it a month ago from Ebay, and it worked flawless. At some point the display just turn off. I restarted the phone, heard the sound when it starts and even the softkeys worked. But the Display was still off. After after a few restarts the display turned on for a minute, just to freeze after that and turned off again. The phone was still on though.
However I've read a bit around and found out that it could be a cpu heat problem, which could be true because my phone was way too warm sometimes. So I removed the display and put a tiny little bit thermal compound on the cpu. Somehow I managed to rip off the connection cable to the display ... also I managed to rip off the little black cable near the soft keys. The soft keys still work though.
When I start the phone the starting sound comes, the softkeys blink when I restart the phone, you hear the volume buttons etc. So it seems the phone is fully working. Just the display or touchscreen is damaged.
Some pictures:
http://i.imgur.com/LQ4M2Gb.jpg
http://i.imgur.com/uWZTfNe.jpg
So, what can I do?
Do you think I could just send it to this site http://www.directfix.com/product/REP-0063.html and let them repair it? Or did I destroyed my phone too much already?
Thanks in advance.

Well,the top cable is ripped off,you can't do anything at this point.The bottom one just seems out of slot as far as i can tell from the pics.
Basicaly you can send it to the repair shop,but i don't think that you can only change the cables,don't really know what to say...Could cost you some to repair it.

I don't want to only change the cables. I want to use this full repair service:
"HTC One X Complete Screen Replacement Service (Includes LCD & Digitizer)".
So they change the cables and put on a new LCD & Digitizer as far I understand.
But do you guys think they will put back the other cable back in slot too?

Please just answer, do you guys think they can repair it if they put on a new screen & digitalizer?

I don't see why not,you can also contact them and explain them the situation.Those cables are quite easy to put back with the proper tools so you don't have to worry about it.

[Q] Scrambled/garbled screen on T-Mobile G2 - flex cable problem? Please help!

Hi all.
My phone's display has been getting progressively worse and worse over the past couple weeks. Initially, when I flipped out the keyboard, the screen would get garbled. I could technically still interact with it (it still responded to stuff), but the display would start glitching out and move all over the place. It's like there's tons of scanlines and it repeats the same display again and again.
When I went back into portrait mode, things were fine. This was extremely awkward but I dealt with it because I had little choice.
However, over the past couple weeks, the problem's gotten progressively worse. Holding my phone a certain way would cause the screen to glitch up again. It came to a point where I had to flip out the screen and keep the flex cable positioned a certain way so I could see the screen. I'm using a dull edge to kinda poke that flex cable around and it helped me gain use of the phone, but today it's gotten so bad now it refuses to "undo" itself when it boots and no amount of poking and prodding of the flex cable will help.
It looks almost exactly like this guy's phone (not my video):
http://www.youtube.com/watch?v=4IVlvZt3U3U
Pictures of how my phone looks right after bootup:
http://i.imgur.com/eQ5j9KC.jpg
A few seconds after bootup:
http://i.imgur.com/L4doDyV.jpg
http://i.imgur.com/zVIH9Pw.jpg
Luckily, I was able to get a VNC server installed on the thing, so if you guys think it's a software issue, I may be able to get it to do something, but I'm not going to be able to interact with the phone if I put it into Clockwork Recovery mode, so doing a hard reset is out of the question.
I'm having a flex cable come in and I'm going to get some local assistance disassembling and installing it, but before I do that, had anyone had this issue before? What did you do to fix it?

best guess is you need a new flex cable
for more info and links to disassembly see here