Somebody else posted a while ago but nobody really knewanything and I now have same prob.
If I press the power button the screen will not switch off but If you hold it down the backlight still switches off so it's not the button broken. I thought OK I can live with this for a while but this means you also cant switch it on and the only way is by not locking all buttons when device off but of course it switches on in my pocket and my battery is dead before the end of the day. Also if I press the soft reset button to try and switch the device on, it hard resets it without me pressing the power button in at the same time, which again incredibly annoying!!!
I have tried reflashing ROM but no change, My power button did break off the mainboard a while ago so at first thought it was this problem come back but as others have the same problem and button still turns off backlight Im stumped about whats going on! . Stupidly even though within warrenty I took it to my local phone repair shop for the original button problem instead of T-mobile so my warrenty is now void so they probably won't accept to fix this new prob.
Unless anyone knows of a fix, would T-mobile take and fix If I pay (as I voided warrenty) or would they not even want to touch it because the void sticker is removed. Also would they charge a stupid amount even for the smallest fault?
Cheers, andy
I just brought mine to a t-mobile shop last week because my power buttom broke off the mainboard. My warranty sticker was also broken and they did accept it. Why wouldn't they if you're paying they don't care.
T-mobile don't do repairs, they use HTC, who also do out of warranty repairs.
http://www.htceurope.com/Wizard.aspx
I would clean off the warranty sticker completley including all the bits in the screw head and deny all knowledge if asked ;-)
Richard
Today I got a phonecall that they had replaced my phone with a new one. I told them that is wasn't a warrenty repair... they did make a mistake, but I still get the new phone for free... This solves my problems...
hi it was me that posted before, i never found a solution to this. i spoke to htc but they seemed confused as well. luckily mine is still under warranty so its going back. im going to drop mine into them in milton keynes so i will see if i can quiz them on it more.
WOW its fixed.
dont know whether anyone still needs info on this BUT mine is fixed, i told it that i was gonna take it to htc in milton keynes tomorrow and it fixed itself. well sort of. i will just write what i did when it star ed working. i tried everything to fix this. if you read the top post i think that is a copy of my original post. i was using my blueangel tonight to browse this site in bed using wifi. normally i dont really use this but my exec is charging. anyway i had tried turning wifi on and off before and the problem was still there. now after prolonged use the power button is working. i think it must be the wifi. i suspected this from the start. other than that the only other thing i have done is rotate the display but i think its the wifi. you know when you put them in standby when wifi is on there is a delay in turning off while it disconnects. mine froze then and after that the button was not working this is why i suspected it had something to do with this from the start.
ok everyone my first post here and I am not very familiar with the technincal stuff so please explain the fix properly (if their is any)
I have the o2 xda orbit and I never tried to modify it (change firmware, rom etc) or upgrade to WM6. Everything is original the way that it came. I have been using the orbit for about 6 months now and I had bought it off ebay.
Just yesterday I was chargin the orbit through the usb cable and I removed it since i had to go out and i just put it in my jeans pocket and after 5 min when i took it out there was a blank white screen. I took the battery out overnight and turned it on in the morning but still the same thing happens. The images below show exactly what shows up on my screen
I dont know what to do The minute i turn it on that is the only screen i see. No windows logo nothing. I removed the sim card and memory card. But still no luck. Can i change it through warranty eventhough I live in Canada? ANy help is appreciated!! I would be glad to give more information to you if I can.
If you know of any other forums where i can get better help, please let me know.
Switch it on but hold in the voice record button when you do it, do you get a Red/Green/Blue screen?
Maybe, it saw a ghost?
MaskedMarauder said:
Switch it on but hold in the voice record button when you do it, do you get a Red/Green/Blue screen?
Click to expand...
Click to collapse
nope same blank white screen with a line in the middle.
Looks like a serious hardware death there. Did you buy it off an ebay shop or private? If from a shop you may be able to make a warranty claim, if not you'd have to post it to a repair centre and cross your fingers.
I am presuming here that you have tried a Hard Reset too, ie holding down both softkeys whilst resetting, then releasing the softkeys when you get a confirmation message.
if i press the reset button nothing happens. Orbit only responds to the power button. I bought it off ebay and hence the problem. Do you think it is only a screen malfunction and if i buy a replacement screen I should be able to solve the problem? is it easy to replace the screen by myself?
I DONT KNOW IF IT'S WORK for you BUT... I work in a big shop where a lot of clients buy differents models from Htc and, 2 months ago, somebody have the same problem (with 2 lines) WITH a Tytn. We have flashing his tytn with the original rom and the problem has gone !
Have you try to make a connection with you pc ??? If activsync work...(maybe the bootloader work and ... of course, you can't see if the htc is running because you screen d'ont work for the moment)... you have nothing to loose if you try... If activsync dont work, try to put a original signed rom from htc to the root directory of your microsdcard and follow this tread from the xda-wiki section : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
REALLY, I'M NOT A PROFESSIONAL BUT I REALLY THINK THIS IS MADE BY SOMETHING WRONG (FOR ANY RAISON) IN YOUR ROOT DIRECTORY AND THE SCREEN CAN'T WORK NORMALLY... oF IT'S MEABY DUE TO A BAD CONTACT BEETWEEN YOU SCREEN AND THE "MOTHERBOARD" FROM THE PDA.
I HOPE THIS CAN HELP YOU.
derooseolivier said:
I DONT KNOW IF IT'S WORK for you BUT... I work in a big shop where a lot of clients buy differents models from Htc and, 2 months ago, somebody have the same problem (with 2 lines) WITH a Tytn. We have flashing his tytn with the original rom and the problem has gone !
Have you try to make a connection with you pc ??? If activsync work...(maybe the bootloader work and ... of course, you can't see if the htc is running because you screen d'ont work for the moment)... you have nothing to loose if you try... If activsync dont work, try to put a original signed rom from htc to the root directory of your microsdcard and follow this tread from the xda-wiki section : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
REALLY, I'M NOT A PROFESSIONAL BUT I REALLY THINK THIS IS MADE BY SOMETHING WRONG (FOR ANY RAISON) IN YOUR ROOT DIRECTORY AND THE SCREEN CAN'T WORK NORMALLY... oF IT'S MEABY DUE TO A BAD CONTACT BEETWEEN YOU SCREEN AND THE "MOTHERBOARD" FROM THE PDA.
I HOPE THIS CAN HELP YOU.
Click to expand...
Click to collapse
Could you give me step by step instructions on flashing the xda orbit rom. Out of frusturation i tried updating the orbit to WM6 and it successfuly updated according to message on my computer screen. So i have wm6 on my phone now but still the same problem.
I exctacted the file and put it in the root of my sd card and pressed the voice button and power button. Now how do i know that the ROM is being flashed? (since i just see the white screen). Even for the orbit should i just name the file on the microsd card as ARTEIMG.nbh ?
Thanks for all your help..but since i am new to this could you please explain teh process in more simpler terms?
Thanks again
dealsoutlook said:
ok everyone my first post here and I am not very familiar with the technincal stuff so please explain the fix properly (if their is any)
I have the o2 xda orbit and I never tried to modify it (change firmware, rom etc) or upgrade to WM6. Everything is original the way that it came. I have been using the orbit for about 6 months now and I had bought it off ebay.
Just yesterday I was chargin the orbit through the usb cable and I removed it since i had to go out and i just put it in my jeans pocket and after 5 min when i took it out there was a blank white screen. I took the battery out overnight and turned it on in the morning but still the same thing happens. The images below show exactly what shows up on my screen
I dont know what to do The minute i turn it on that is the only screen i see. No windows logo nothing. I removed the sim card and memory card. But still no luck. Can i change it through warranty eventhough I live in Canada? ANy help is appreciated!! I would be glad to give more information to you if I can.
If you know of any other forums where i can get better help, please let me know.
Click to expand...
Click to collapse
Sorry to tell you dear friend but your LCD is cracked, you can see it very clearly on the first picture, bottom right hand corner.
simple way to test if true is to connect to the pc and see if its recognised.
sorry to give you some bad news.
neilhhardy said:
Sorry to tell you dear friend but your LCD is cracked, you can see it very clearly on the first picture, bottom right hand corner.
simple way to test if true is to connect to the pc and see if its recognised.
sorry to give you some bad news.
Click to expand...
Click to collapse
i dont mind the bad news. So if i just buy a replacement lcd from ebay would that work? How hard is it to replace LCD? Is it something that i can do by myself? What should i be buying THIS OR THIS. You guys know of any other cheap places where i can buy lcd screen? My computer does recognise the orbit once i connect it to the computer and activesync successfuly completes the operation. So i am guessin there is something wrong with the lcd screen.
If You Put Out Your Battery More Than 30 Second, It Make The Same ?? And In The Same Place???
NOW YOU HAVE NOTHING TO LOOSE... if is it the screen, you must change it...
But before, try to flash one more time your artemis with the original wm5 and, for sure, begin to make it supercid before (so you are sure you dont make a second problem !).
The client with a same problem (but not with the little trace at the right side from your screen) is happy now ! Play also a littlebit to make hardreset, softreset, usb bootloadermode ... And maybe you will see the color coming back!
I said one more time, i am not a professional for this problem but, "still trying" is never bad.... And for the screen... if you command him, you must waiting... so... try it first and if you have no more solution to try, send the pdaphone to htc... And if it's the screen, pay the replacement to htc and dont make it you self ( ebay?? are you sure 100 % the screen you buy its working???!!!??? ).
Yeah, if your computer recognises it, it'll just need a new screen.
cr0bar said:
Yeah, if your computer recognises it, it'll just need a new screen.
Click to expand...
Click to collapse
Ok, first bit, there is a section on this forum on linking where to buy a lcd with touch screen, and there is also a guy who has done this, you can read up on it, but it will take you some time and hours removing the covers ( trying not to damage them ) and also hours of painfull cleaning, dust is the worst thing you could ever imagine,as soon as that nice lcd comes out of the package you will have dust all over it and once you have the phone back together the smallest amount of dust trapped inside will drive you crazy.
The best action for you to do would be to send it off for repair, in the end you will have your phone fully working.
the price of the replacement LCD is around 80 Euro's + sending cost.
the price you have to look into for a repair could be double.
but look into this carefully and ask yourself these questions.
1. Have you ever done this before.
2. Do you have the right tools.
3. Do you have a lot of paitience.
4. Is it worth doing it yourself and causing more damage to the phone ?
if you cannot say yes to all of these points that the solution is to send it off to repair.
hope this helps.
Regards.
Neil Hardy
to dealsoutlook
i've just sent you a pm! please check
Does anyone know, where can it be send for repair to?
I have a bricked phone (even bootloader is not started).
And it was bought at eBay, so no any warranty or so.
This is XDA Orbit and I'm in Austria, where O2 has no representation.
Could you, please, advice the companies/possibilities to reapir it (chip change or direct reflashing - not via USB).
Alex
neilhhardy said:
Ok, first bit, there is a section on this forum on linking where to buy a lcd with touch screen, and there is also a guy who has done this, you can read up on it, but it will take you some time and hours removing the covers ( trying not to damage them ) and also hours of painfull cleaning, dust is the worst thing you could ever imagine,as soon as that nice lcd comes out of the package you will have dust all over it and once you have the phone back together the smallest amount of dust trapped inside will drive you crazy.
The best action for you to do would be to send it off for repair, in the end you will have your phone fully working.
the price of the replacement LCD is around 80 Euro's + sending cost.
the price you have to look into for a repair could be double.
but look into this carefully and ask yourself these questions.
1. Have you ever done this before.
2. Do you have the right tools.
3. Do you have a lot of paitience.
4. Is it worth doing it yourself and causing more damage to the phone ?
if you cannot say yes to all of these points that the solution is to send it off to repair.
hope this helps.
Regards.
Neil Hardy
Click to expand...
Click to collapse
Thanks for letting me know..i though it was a pretty simple thing to do by myself. But now I definitely dont want to take that chance. I will shop around for some local cell repair shop. But since this phone is not available in canada I dont know where to go. Does anyone know of a repair shop in Toronto?
I would think the quickest turnaround would be throught HTCamerica. Its located in Houston Tx...
http://www.america.htc.com/support/service-repairs.html
thats just my two cents, turnaround time is like 5 to 7 days after receipt... if they service your phone, they do p3300, you would have to call to find out
Hey Buddy
dealsoutlook said:
i dont mind the bad news. So if i just buy a replacement lcd from ebay would that work? How hard is it to replace LCD? Is it something that i can do by myself? What should i be buying THIS OR THIS. You guys know of any other cheap places where i can buy lcd screen? My computer does recognise the orbit once i connect it to the computer and activesync successfuly completes the operation. So i am guessin there is something wrong with the lcd screen.
Click to expand...
Click to collapse
I can help u. just reply. I have gone thru such case. OK Post me and I will guide U
Cheers
This happened to mine too,and screen was not broken.Working internally but white 'screen of death' showing.Sent back to 02 but no mention of fault on return.I think rom suffers corruption since it was after x close, fix.Not sure though!
Hi ppl,
First of all, sorry for my bad english, cause i am from mozambique nd doest speak/write well english.
Lets go to the problem: i bought i Touch Diamond (new), 1 month later the backlight doesnt work , i cannt power on the phone cause i cant see nothing...... i need some help here, plzzzzz
when the backlight works, its work very dark i see something, nd the last thing i saw was this error:
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
Can u help me???
Thanks
i am waiting 4 ur answers...
I am sorry but I am quite sure that the only way to fix it is to ship it to htc to have it repaired.
It's an hardware failure.
Definitely hardware related and unable to be fixed via software of ANY kind.
I dropped my Diamond about 50cm to the floor and had exactly the same problem.
Seeing as my Diamond is out of warranty (and utilising my vast background in the repair of WSOD Hermes) I decided to pull my phone apart, press firmly on the screen-to-mainboard connector, and my phone was magically better!
No gaurantees, but I haven't had a problem since...long story short...DON'T drop the Diamond...it is crazy fragile!
Oki Fellows,
but i was searching in the web nd found some sites/foruns that say that problem its because the cel was flash wit other rom version, early my cel wasnt able to charge nd i send to our celphone operator (Mozambique Celular - MCel) to repair cause it was on warranty, thei repair it but some days later i had that problem.
Surely its a Hardware Problem????
When i had that problem i send an email to HTC Support, i think 2 weeks ago, but til 2daay i hadnt the answer, i want my touch diamond back, lool,
Thanks for help me...
I wil send again to my operator to see whats happen wit the cel....
[email protected]
**************************************************
http://www.fotolog.com/danny_3rdeye
Hi ,
My SGH-i927 was working quite happily sat on charge connected to a USB cable on my PC, I left work with the phone in my pocket and when I came to use it a couple of hours later it was completely unresponsive.
It will not respond to power button at all
It shows no activity when on charge either via wall wart or USB, it does not show up as connected to the PC when USB cable plugged in.
I've tried removing the battery for a couple of minutes and also a different battery with long and short presses of the Power Button whiles't holding volume with various combinations there of.
This is not as a result of my flashing anything it just stopped, the threads I've seen using search all seem to be able to get to a boot screen of some description mine is completely dead.
Phone was Unlocked / rooted / backed up + efs backup / running 4.0.4 UCLJ3 Lite Kernel
Anyone have a suggestion on how I might be able to resurrect it or should I put it in a long ship and set fire to it ?
Please note I imported this Phone into the UK
I approached a local SAMSUNG service center and they won't touch it as it's from outside the EU. - Further more on discussing the nature of the problem I was informed it's probably a hardware fault due to IC or Fuse or combination of them. As these are surface mounted components they wouldn't be repairable by normal means and they wouldn't even give me a number for an independent phone repair.
Can anyone know of and can give me the contact details of a repair person based in the UK who'd be willing to look at it ?
requiem_mortis said:
Please note I imported this Phone into the UK
I approached a local SAMSUNG service center and they won't touch it as it's from outside the EU. - Further more on discussing the nature of the problem I was informed it's probably a hardware fault due to IC or Fuse or combination of them. As these are surface mounted components they wouldn't be repairable by normal means and they wouldn't even give me a number for an independent phone repair.
Can anyone know of and can give me the contact details of a repair person based in the UK who'd be willing to look at it ?
Click to expand...
Click to collapse
I can send you a working motherboard if the rest of the phone is ok
netseby said:
I can send you a working motherboard if the rest of the phone is ok
Click to expand...
Click to collapse
Thankyou,
I appreciate the time taken to respond and especially the offer, however although not completely inept with a soldering iron changing the motherboard may well be beyond my expertise, but I'd be willing to give it a go if all else fails.
I have managed to locate another repair center reportedly having Samsung Qualified technicians. Initial communications seemed to suggest they could deal with the assessment which they provide for free. I have sent the handset to them and am now awaiting their report.
If things do not work out with the repair center, I would like to contact you to discuss your offer further.
Regards
Response from repair center - beyond economical repair - but no further detail.
I think I'll call it quits now and just invest in a new handset.
Dead Captivate Glide - RIP ?
netseby said:
I can send you a working motherboard if the rest of the phone is ok
Click to expand...
Click to collapse
Going through my draw I came across my dead handset and would dearly love to get it working again ....I know it's been a while and apologies if I'm now too late but is your offer of a replacement motherboard still open ?
Regards
Phill
requiem_mortis said:
Going through my draw I came across my dead handset and would dearly love to get it working again ....I know it's been a while and apologies if I'm now too late but is your offer of a replacement motherboard still open ?
Regards
Phill
Click to expand...
Click to collapse
http://www.newegg.com/Product/Product.aspx?Item=9SIA2KF0YV4051 $145 brand new.
I might be willing to part with my own for a reasonable price too, but it wouldn't be less than $100. Has an extended battery. Probably better to get a brand new one.
Hi everyone,
Just bought a new Mi5s on November 10th.
After 6-7 weeks, the phone died. Now it varies between not doing anything to flashing red on the notification light when charging and pressing the power button.
Any ideas/similar issues?
I tried charging with other chargers and cables, nothing helps. I bought the phone in Thailand and am now in Myanmar so was unable to send for repairs under warranty (I will try the warranty avenue when again Thailand).
Thanks for any help!
Hi, did it die for no reason or did u do something first? What was the last thing that you did on it?
I unlocked the ROM a few weeks before. a week before it died I ran a TWRP backup, installed CM13, liked it a lot, ran another backup and restored the original backup (MIUI stock).
It kept working nicely after the restore and a few days later it died.
I honestly dont know then mate sorry.if you ever find out what went wrong I would like to know.
jnoam said:
After 6-7 weeks, the phone died. Now it varies between not doing anything to flashing red on the notification light when charging and pressing the power button.
Click to expand...
Click to collapse
Check if a service port like "Qualcomm HS-USB Qdloader" appears when you connect it to pc.
Check this page for more info:
http://www.androidbrick.com/xiaomi-mi5-how-to-flash-global-multilanguage-rom-unbrick-guide/
Thanks.
I checked this but nothing is recognized. I returned it to the seller in Thailand who claimed he does not provide warranty since this is a Chinese phone... But he did remove all the warranty stickers so I am unable to return the phone in China! So after much pressure he agreed to send it to his dealer. I assume the phone is lost completely. That was my last Xiaomi!