hi... i try to use another GPS program. igo 8 on my i780.. but i can't get signal locked.. try to seting GPs on IGo:
com port:auto
baudrate:auto
then i click auto detect..
result :no gps found.. any 1 can help me?
how to setting the gps on IGO8 so i can get signal locked??
tesetd on garmin xt, i can get signal locked.. but no on iGO.. help me plz
Help me plizz
Try setting External GPS - in Start -Settings-System - to one of COM1,COM4 or COM8. Live Hardware at COM9,baud 4800 and Access thicked.Reset IGO8 to default settings and then try autodetect for GPS.
Depending on your ROM,one of this settings will work.Repeat for each COM setting to see wich on gives you faster GPS lock.
For the first time be patient with GPS lock -it could take 10-15 min.
seaman5705 said:
Try setting External GPS - in Start -Settings-System - to one of COM1,COM4 or COM8. Live Hardware at COM9,baud 4800 and Access thicked.Reset IGO8 to default settings and then try autodetect for GPS.
Depending on your ROM,one of this settings will work.Repeat for each COM setting to see wich on gives you faster GPS lock.
For the first time be patient with GPS lock -it could take 10-15 min.
Click to expand...
Click to collapse
hm... some one said that don't change anything inside of EXTERNAL GPS SETTING.. it caused GPS microsoft bugs..
anyway.. all setting you mentiod above already correct to my device
Try hard reset your i780, reinstall IGO8 then repeat all of the above.
Back-up your data first !
seaman5705 said:
Try hard reset your i780, reinstall IGO8 then repeat all of the above.
Back-up your data first !
Click to expand...
Click to collapse
thanks 4 help.. but before i install IGO 8 on my i780, i upgrade my ROM first...
Garmin works fine on my i780
then i try IGO 8
upz...............
Set External GPS
Program : Com1
Hardware : Com9 , baud rate : 28800
Access : checked
Enhanced GPS
XTRA Enable : Enable
Restart and retry
If you set GPD1 in External GPS (Program)
Garmin MobileXT can access it but iGO8 can't, that's why
l_pete_l said:
Set External GPS
Program : Com1
Hardware : Com9 , baud rate : 28800
Access : checked
Enhanced GPS
XTRA Enable : Enable
Restart and retry
If you set GPD1 in External GPS (Program)
Garmin MobileXT can access it but iGO8 can't, that's why
Click to expand...
Click to collapse
woww thanks my friend.. it works.. but first i just change gps setting from GPD1 to COM8.thats it...
Related
Hi there,
just moved from Mio A701 to Asus P535 and am quite missing this SIRF InstantFix function of GPS.
On A701, there was this app clmapp.exe that opened virtual GPS port on COM4 and used downloaded ephemeris data in any GPS application that connected to this port to acquire almost immediate fix. You can only use HW GPS port COM2 on P535, no virtualizing, no ephemeris.
Any ideas or even attemts to get similar functionality on P535?
Thanks
Ggs Gate
DL GPSGate and use it. It can fix your problem. ^^
How exactly can GPSGate help me in acquiring Ephemeris data?
I have copied several files from A701 to P535, updated registry with EE data, downloaded the ephemeris file via the control panel, set GPS virtual port to COM4, and executed CLMApp.exe - but no app was able to connect to the GPS on COM4. Only default HW COM2/4800 works.
Any ideas what to do next?
Up
hi czbird, any improvements in your "project"?
i would be myself hardly interrested in it as well.
thanx
none, so far have tried this QuickGPS tool, but with the same result - ephemeris files downloaded ok, but not being used.
I have a bad feeling, that the gps chip or the firmware used is not capable of reading the ephemeris files directly. I say this since I've tried sirfdemo for ppc and there is no option of loading the ee file. In other GPSs is an option there, to load the ee files. So, sad as well, but I think we need asus's support for this, and as I know them, we can wait for long...
Hi,
I am running on a HTC P3300, not an M650.
With 3.7 my GPS was so accurate.
Now on 4.0, it has become unusable, th emap keeps spinning and it shos the street I have crossed 20 meters back.
Had anyone got this issue?
I am running on tomtom mobile 6.03.
Should I install the M650 fix?
what does this fix do?
Hello.
Are you sure you didn't modify some settings for your gps, in fact?
I had B&B V3.7 and I dit not have any problems with Tomtom Navigator 6.03 .
I will try tonight with B&B V4 because I didn't install Tomtom Navigator just after flashing. So I will send a feedback and we'll see
nope didn't change anything,
com4
gps hrdware support=none
baud rate = 4800
manage gps automaticaly=activated
It works perfect for me. Smooth & Fast
ok ,
maybe I need a clean install because i keep copying from my sd card to the tel.
Where can I find an install file for tomtom 6.03?
nickytheshaft said:
ok ,
maybe I need a clean install because i keep copying from my sd card to the tel.
Where can I find an install file for tomtom 6.03?
Click to expand...
Click to collapse
http://www.tomtom.com/updates/ttn.ppc.6.030.8320.cab
nickytheshaft said:
nope didn't change anything,
com4
gps hrdware support=none
baud rate = 4800
manage gps automaticaly=activated
Click to expand...
Click to collapse
try baud rate = 19200 in the gps settings and in tomtom settings ! worked for me
thanks guys
cheers
Gunk said:
http://www.tomtom.com/updates/ttn.ppc.6.030.8320.cab
Click to expand...
Click to collapse
I got an error message while trying to install : installation of ttn.ppc.6.030.8320.cab was unsuccessful...
same for me...;
nickytheshaft said:
same for me...;
Click to expand...
Click to collapse
it looks like you need tomtom home to install this update...
no need exctract the cab with winzip
it will give 2 files and a folder
copy all three to the storage card
reboot the pda, it will install, create shortcuts and voila
don't forget to delete the files frome the card after or at each
start it will launch tomtom
Hello.
I have SPV M650 Orange in Poland.
I have problem with GPS, can’t find signal.
I will download QuickGPS, and execute map from micro SD card.
And I have still message “search GPS signal”, and nothing happened.
Please help.
Tom.
Try to search sattelite signal on the open space not under the roof.
First time you can wait up to 1/2 hour.
If You haven't any GPS apps download TT driver 2.06 : http://www.pocketgpsworld.com/modules.php?name=Downloads&d_op=getit&lid=121
Settings: choose from top drop down box "NMEA 0183v2 9600"
Second drop box "COM4" for communication .
I have the same problem I`m installed TT ,but the same, status - gps is on , but no recieving data...
PLease, somebody , help!
The setting should be set to Settings: "NMEA 0183v2 9600" for the GPS to work. I have the same phone and cannot lock to GPS unless I use this setting.
Thanks All I solve this problem.
Thanks All I solve this problem.
1. Download “VisualGPSce” from http://www.freewareppc.com
2. In “Settings” (Ustawienia) “GPS” set :
3. “Software” (Programy) = COM4
4. “Device” (Sprzęt) = COM5 , 4800
5. OK.
6. Test signal from “VisualGPSce”
7. OK
8. In AutoMapa „Settings” – “GPS” set COM4, 4800 in page 1
9. Page 2 All switch Off
Regards
Tomasz
What rom are you using?
please, write...
Hello,
TMC works now with hypergps beta 5 and igo8 on the xperia.
http://forum.xda-developers.com/showthread.php?t=512630
Thank you beemer!
hello i've tried this like 50 times, but it doesn't work for me.
Can someone make a step by step instruction for iGO8?
or just post the sys.txt and the system.ini and the hypergps-settings.
thx in advance.
skaterazn said:
hello i've tried this like 50 times, but it doesn't work for me.
Can someone make a step by step instruction for iGO8?
or just post the sys.txt and the system.ini and the hypergps-settings.
thx in advance.
Click to expand...
Click to collapse
It isn't that hard anymore. I only have to perform these steps after a rom flash:
1. Install hypergps beta 8
2. Start hypergps
3. Push 'TMC' button
4. Plugin headphones to function as antenna
5. Start iGo (you can close hypergps, but it's not necessary)
6. TMC unit is probably recognised by iGo. If not, go to Menu - Settings (page 2) - TMC and search for TMC receiver. If it's not found fast, try to set it to search for Royaltek protocol on COM9 (standard values in HyperGPS)
7. Go to navigation mode and wait for TMC messages to come in.
You can check TMC messages (messages display an envelope or warning triangle icon below 'next move' area) by pushing in the right top of the screen (battery / gps meter) and after that the TMC icon (3rd icon in the low part of the screen)
There's no need (anymore) to change any stuff in system.ini or sys.txt. If you have done so in your attempts, put a ; in front of a line to let iGo ignore it for now or just delete it.
thx i will try at home, hope it will work
igo8?!?!?!
has anyone have an ideea on how to instal igo8? please do help and a good kit btw
Yes, and IGO 8 works flashfully on our Xperia... and without installation! ;-)
and does anyone have a kit, a link from where i can download it?
and also is it posible to download torents on phone? if so, with what program, does anyoane have a kit instaler?
IGO is not to download. You must buy it.
rebreanradu said:
and does anyone have a kit, a link from where i can download it?
and also is it posible to download torents on phone? if so, with what program, does anyoane have a kit instaler?
Click to expand...
Click to collapse
look here
and here
sorrowful said:
look here
and here
Click to expand...
Click to collapse
warez links are not allowed!
install hypergps
Gwystyl said:
It isn't that hard anymore. I only have to perform these steps after a rom flash:
1. Install hypergps beta 8
2. Start hypergps
3. Push 'TMC' button
4. Plugin headphones to function as antenna
5. Start iGo (you can close hypergps, but it's not necessary)
6. TMC unit is probably recognised by iGo. If not, go to Menu - Settings (page 2) - TMC and search for TMC receiver. If it's not found fast, try to set it to search for Royaltek protocol on COM9 (standard values in HyperGPS)
7. Go to navigation mode and wait for TMC messages to come in.
You can check TMC messages (messages display an envelope or warning triangle icon below 'next move' area) by pushing in the right top of the screen (battery / gps meter) and after that the TMC icon (3rd icon in the low part of the screen)
There's no need (anymore) to change any stuff in system.ini or sys.txt. If you have done so in your attempts, put a ; in front of a line to let iGo ignore it for now or just delete it.
Click to expand...
Click to collapse
How do you install hypergps?
When you unzip the file you finde a few files inside and after?
Can you give step by step how to do?
Thank you.
Hi every one,
I have paired an external BT GPS , and every time that i want to use it with TomTom or Oziexplorer, i have to manually connect to it as BT manager ask.
Any clue on doing this automatically as it was before in other devices with Broadcom stack?
Thanks.
Try to install "GPSGATE 2" ...
GPSGATE will create a virtual port that u can use with TT or Ozie.
for example : GPSGATE found my Royaltek (by Bluetooth) and do a virtual port com 4 (u can choose the number), after that, in tomtom or Ozie i choose my "gpsgate virtual" port 4 (i believe it's named "Franson" port) ...
...and that's all !
GPSGATE must be start with your device (see in options) ...
Fullpoweradonf said:
Try to install "GPSGATE 2" ...
GPSGATE will create a virtual port that u can use with TT or Ozie.
for example : GPSGATE found my Royaltek (by Bluetooth) and do a virtual port com 4 (u can choose the number), after that, in tomtom or Ozie i choose my "gpsgate virtual" port 4 (i believe it's named "Franson" port) ...
...and that's all !
GPSGATE must be start with your device (see in options) ...
Click to expand...
Click to collapse
That is one of the things that i tried, but still asking if i want to connect it.
Thanks any away.
Strange...because, as i start TT, gpsgate look after my BT GPS and switch on automatically BT on TP2...and connect to GPS !
I do nothing, only start TT ...
I think that the difference between us is that mine is an Spanish rom.
Also i can't change the settings for external gps at wm settings page.
Perhaps it is a bug on Spanish rom, who knows.