windows live service - 8525, TyTN, MDA Vario II, JasJam ROM Development

i have used schaps and some others but when i use a chinese patch to enable chinese encoding windows live service(email,messenger) says there is no internet connection. i have tried it over GPRS and Wifi both is not working. so i believe is something to do with te actual coding in windows.
anyone know how to fix this issue?

iluvgillgill said:
i have used schaps and some others but when i use a chinese patch to enable chinese encoding windows live service(email,messenger) says there is no internet connection. i have tried it over GPRS and Wifi both is not working. so i believe is something to do with te actual coding in windows.
anyone know how to fix this issue?
Click to expand...
Click to collapse
Was your Windows Live for Windows Mobile worked before installing "Chinese patch"?
Does it work when you remove "Chinese patch" ?

Related

VPN Log In Problem with WM6 Black Edition

Not sure does anyone else have the same problem, I can't seem to log in VPN network through wifi in my school.
Tried bother Black Edn. v1.1 and v1.2, neither one can go through.
Anyone who succeed care to share the settings? I was told my log in ID or Password is wrong.
Or maybe it's the network which doesn't support WM6 yet?
Nobody uses VPN here?
I have the same issue, done a search and it appears that the TCP/IP stack is not binding with the VPN client software. This appears to be a general issue, I use the Checkpoint secure remote client but it also does not work with Cisco, maybe others. Unfortunately I do not know of a work round.
Malcolm
I have exactly the same issue with my WM6. I use the AT&T dialer on my laptop and try to connect over the umts connection created between my HTC Universal WM6 via usb connected to my laptop.
If you have any updates on this I would be grateful.

[SOLVED] ActiveSync 4.5 Problem w/Windows Mobile 6

I upgraded my Cingular 8525 today to Windows Mobile 6 with no problems that I can see except for one annoying thing.
When I have my device connected to my desktop, I get an error when trying to sync with my Exchange server.
I have my 8525 set up for Microsoft Direct Push. In the past, the 8525 would sync with Exchange through my computer and it's network connection. Now this not seem to work since upgrading to Windows Mobile 6.
===========================================
Many thanks to the folks who discovered this fix. You would think ActiveSync would have put this entry in itself. I was seeing both error code 85020006 and error code 80072f7d.
One simple registry edit and all is working perfectly. See below:
From: http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
#23 If you are using ActiveSync 4.2 and have a problem with Desktop Pass-through it may be caused by a Layered Service Provider (LSP) that use the Windows TCP/IP stack. This has been known to occur with ISA Server. The registry file LSPValue.reg will reverse this setting. Microsoft and the Pocket PC OEM does not support users that edit the registry.
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
If you are using ActiveSync 4.2 and have a problem with Desktop Pass-through it may be caused by a Layered Service Provider (LSP) that use the Windows TCP/IP stack. This has been known to occur with ISA Server. The registry file LSPValue.reg will reverse this setting. Microsoft and the Pocket PC OEM does not support users that edit the registry.
RAlfieri said:
I upgraded my Cingular 8525 today to Windows Mobile 6 with no problems that I can see except for one annoying thing.
When I have my device connected to my desktop, I get an error when trying to sync with my Exchange server.
I have my 8525 set up for Microsoft Direct Push. In the past, the 8525 would sync with Exchange through my computer and it's network connection. Now this not seem to work since upgrading to Windows Mobile 6.
Any ideas are appreciated. I'm guessing it is another ActiveSync anomaly.
Regards,
Rob
Click to expand...
Click to collapse
just untick Enable advanced network functionality
/start/settings/connections/usb to pc/
Hmmm... I did and it still gives me the error. Code 85020006. Cannot connect with current connection settings. Microsoft Exchange - Attention Required.
Other ideas?
Regards,
Rob
This MAY help you:
right click on the activesync icon in your system tray (on the pc).....click "connection settings".
on the drop down menu titled "This computer connects to:" change this from automatic to "the internet", then apply the settings.
Cheers! Thanks for the suggestion. I got a different error now.
Synchronization could not be completed. Please try again later. Support Code: 80072f7d
You gotta' love it (or not)...
Regards,
Rob
Same Problem
I know this problem, but never found a working solution.
I can uncheck "Advanced Network Functionality", or change to "Work" under connection settings to succesfully sync with Exchange again, but thats not an option for me.
I want to have work and internet connection at the same time, because I also want to sync my IMAP account over the internet, and update my Weather Forecast automatically.
I know when I hard reset my device, it will work again, but I already did a clean install 1 week ago.
Who really knows why its working one day, and the next day it isn't working anymore???
I guess the problem occurs while using exchange-sync and IMAP at the same time. I had exactly the same problem. And in general, there is a problem with new ROMs since other users have to disable "advanced usb mode". That wasn't the case with older versions of WM6.
This helped for me:
1) Using Black Satin ROM
2) Do not use Schaps Advanced Configuration Tool
But my point is:
WHY is it working for several weeks, and then suddenly it STOPS working??
There must be an explanation isn't it?
It seems to be a problem with my PPC, cause when I perform a hard reset it will work again(but who knows for how long?)
Your link is dead
Pass Through Problem Solved
I upgraded my Dopod 838Pro to Windows Mobile 6 with no problems. Since then when I have my device connected to my desktop, I get an error when trying to sync with my Exchange server.
I used the following settingscombined and they worked GREAT!
- just untick Enable advanced network functionality/start/settings/connections/usb to pc/
- right click on the activesync icon in your system tray (on the pc).....click "connection settings". On the drop down menu titled "This computer connects to:" change this from automatic to "the internet", then apply the settings.
MCEITLIN said:
I upgraded my Dopod 838Pro to Windows Mobile 6 with no problems. Since then when I have my device connected to my desktop, I get an error when trying to sync with my Exchange server.
I used the following settingscombined and they worked GREAT!
- just untick Enable advanced network functionality/start/settings/connections/usb to pc/
- right click on the activesync icon in your system tray (on the pc).....click "connection settings". On the drop down menu titled "This computer connects to:" change this from automatic to "the internet", then apply the settings.
Click to expand...
Click to collapse
This works for me. Vp3G 3.0 Rom. I sync with 2 desktops as well as exchange. Although I'd get errors the sync would still happen for the most part. Now it's perfect though!
Great thread - very helpful.
help!!!
i cant sync with my pc....error no 85010014...
also i m nt able to upgrade my rom...whenever i select a ruu wrapper it says failed to initialize...sumone pls help on this...
thanks in adv
its showin the same warning"failed to initialize properly"
i tried variuos roms(shamanix,tnt,funkey's ,etc) but its still not workin...
guys i updated my .net framework n the roms r gettin updated but my sync still doesnt work
Just another data point... I had the same issue with my Mogul. I tried all the settings changes (Internet, Disable Advanced USB, etc, etc) Nothing worked until i read the MS thread and noticed someone got it working by turning on wifi and then turning it off. Worked for me also. Seems like some settings are getting cached somewhere....
Sorry for digging up and old thread, but I thought I would share something related to this subject.
I recently got a new Kaiser and Dell D830 laptop supplied by my work and was quite annoyed to be getting the 80072f7d error when syncing my exchange email via activesync while connected to my laptop with a USB cable.
I had came across the allowlsp registry setting which resolved the error, but since I was away on a 3 week work trip with nothing much to do, and not being happy about basically disabling a new 'feature' to make something work I was determined to get things working the way they should.
Going by the below articles I noticed that the registry entry either enabled or disabled Activesync desire to use LSP's (Layered Service Providers).
http://pdaphonehome.com/forums/sams...3050-activesync-4-2-internet-pass-thru-2.html
http://www.microsoft.com/windowsmobile/help/activesync/troubleshoot.mspx
As the first link clearly states, Activesync ability to use LSP's is a good thing:
This allows for improved compatibility in environments where connections to the internet must be passed through these LSPs
Click to expand...
Click to collapse
So in situations where one might be using their laptop in numerous different locations and on different networks (airports, hotels etc) we would want it left on.
As per the second link:
When other applications install additional LSPs....
Click to expand...
Click to collapse
It pointed to the fact that some other application installed on my laptop must be causing the problem.
A quick google on "Layered Service Provider" Dell found me an article on the Dell website mentioning that:
Some versions of the Wave software written for Dell include the file biolsp.dll that adds Wave's Layered Service Provider (LSP) to the Winsock catalog, which...htm Future releases of Wave software written for Dell will not include biolsp.dll.
Click to expand...
Click to collapse
So I figured...hmm...I have a bum LSP on my machine, and I have crazy pre-installed Dell software which uses one which is known to cause strange problems. A quick deinstall and reboot later and now Activesync is back working the way Microsoft intended...using LSP's but capable of syncing via pass-thru connection.
I'm happy to have found problem/cause/solution instead of a potentially problem causing workaround....and it passed an hour or two in a lonely Hotel room...win win
other solution
this was posten in on of other messages and it worked great for me...
Delete the partnership with Activesync then reconnect my device and it started working again.
(Make sure you phone is not connected to the USB)
Open Activesync --> File --> Delete Mobile Device
fix outlook, and advance options off did not help..
sadik007 said:
this was posten in on of other messages and it worked great for me...
Delete the partnership with Activesync then reconnect my device and it started working again.
(Make sure you phone is not connected to the USB)
Open Activesync --> File --> Delete Mobile Device
fix outlook, and advance options off did not help..
Click to expand...
Click to collapse
This fixed also my Problem with 80072f7d

Internet Sharing (Not a problem with Kavana or Ricky ROM)

Accessing & Using the internet via USB
I have an unlocked HTC S620 & TyTN (Hermes).
When I connect the TyTN to the USB I am able to browse the internet as the phone uses the PC as a gateway automatically.Even if I do not setup a profile for activesync and the software recognises the device as "Guest". I am ceretain that this is the case and not accessing the service via the carrier or WiFi as I have enabled flight mode and been able to use the internet on the TyTN, browsing, using IM+ Mobile Mesenger etc.
I do not find the same functionality with the HTC S620 (T-Mobile Dash). Does anyone know how to get this functionality going?
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
indiekiduk said:
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
Click to expand...
Click to collapse
When you say partnership I asume you mean bluetooth.
I Turned on Flight mode and diabled bluetooth on the TyTN, connected it to the PC. Activesync came on and I cancelled setting up a profile so it was registered as guest. I got internet access via the usb cable connected to the PC. The same is not working for the S620.
I guess the distinction between the two is the TyTN is a Pocket PC and the S620 is a smartphone. There are various Ethernet Miniport Cards available for configuration on the TyTN. You find these under Settings>>NetworkCard>>Network Adapters. The one I find that shows up as connected is IEEE 802.11b/g Compatible Wifi Adapter, this I find strange as the device is in flight mode. The S620 does not have all the features and configurable network adapters under settings. Simply put a smartphone will not have all the networking capability of the Pocket PC
Let me know your thoughts please, or if you have another solution.
Here is how I got mine working.
1) Connect phone to pc.
2) Make sure ActiveSync shows connected.
3) Under ActiveSync Window select File->Connection Settings...
4) Change the "This computer is connected to:" setting from "Automatic" to "The Internet".
5) Under you phone go to IE -> Menu -> Tools -> Options -> Connections and make sure "Automatically detect settings" is enabled.
That's it. You should now be able to browse the internet through your pc connection.
Forgot to mention I am using ActiveSync ver 4.5.
Dash Internet Sharing Files on S720
On my HTC S720, there was no Internet Sharing option, even though it is WM6 unit. So after reading lots of threads on here and hofo, found out Blackjack had similar issue, as well as some WM5 devices running AKU 3 or higher.
So I copied intshrui.exe, intshare.dll and intshrui.lnk from Dash WM6 Rom dump, created relevant registry entries as:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\intshruiapp]
[HKEY_CLASSES_ROOT\intshruiapp\DefaultIcon]
@="tapres.dll,-14294"
[HKEY_CLASSES_ROOT\intshruiapp\SelectIcon]
@="tapres.dll,-14295"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING]
"0"="MSINTERNET_SHARING"
"1"="IntShrUI.exe"
"2"=dword:00000001
"3"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING\Session]
@=hex:00,db,4d,43,70,b9,c7,01
Then run intshrui.exe and while I can connect via Bluetooth PAN, I couldn't get any IP. I also tried a static IP and that didn't work as well. I investigated a little more, and found another key:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
"DisabledOnBoot"=dword:00000001
"EnableAddressTranslation"=dword:00000001
"EnableDhcpAllocator"=dword:00000001
"EnableDnsProxy"=dword:00000001
"EnablePacketFiltering"=dword:00000001
"PrivateInterface"=""
"PublicInterface"=""
"SetLastDhcpAddrToIEH"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing\Driver]
"Dll"="ipnat.dll"
"Flags"=dword:00000002
"Index"=dword:00000000
"Prefix"="NAT"
Then I copied ipnat.dll to s720. Here is the interesting part. If HKEY_LOCAL_MACHINE\Comm\ConnectionSharing exists, intshrui.exe will not connect, it will briefly grey out and come back to disconnected mode. As soon as I delete the key, it will setup USB or BT PAN and wait for connection (left soft key turns to Disconnect). I don't even have to reset the unit while making change to this key. Also, I left the HKEY_LOCAL_MACHINE\Comm\ConnectionSharing as empty, and noticed as soon as I run intshrui.exe, it will populate
"PrivateInterface"=""
"PublicInterface"=""
keys under ConnectionSharing key. I also tried to change various reg keys, such as HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms\IpEnableRouter to 1, and
[HKEY_LOCAL_MACHINE\System\State\Connectivity]
"InternetSharing"=dword:00000001
None helped as well.
Am I missing a file or reg key to make this work? I looked on my Dash for various keys/files but didn't see anything useful.
has anyone figure out how to get internet sharing on wm6?
Have a look at;
http://forum.xda-developers.com/showthread.php?p=1517183&posted=1#post1517183
I posted up the files and a .reg file taken from my WM6 Dopod 838, but I don't know if everything required is there. If anyone knows what else is required I'm happy to copy it from my device and post it here.
Would you mind posting ipnat.dll - it is missing from Blackjack II WM6..
Internet Sharing kavana's 080308
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
skf said:
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
Click to expand...
Click to collapse
I have fix this problem,and update XIP and SYS to 19202,i'll upload the new version later,just wait...
Thank you. I wait for new version .
btw With your rom I able to install and USE tomtom ,
with T-mobile Windows Mobile 6, I get incompatible with tomtom navigator arror.
http://forum.xda-developers.com/showthread.php?t=364685&highlight=tomtom
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing ----do not work for me ;(
6.1 Internet Sharing Problem *R.I.P.*
Has anyone figured out why Internet sharing NO LONGER works with any 6.1 roms that i flashed to? From Kavanas ROM s to Ricky's Remakes.
Is there a fix to this?
Can any of you "smarter" Gents or Ladies, look into this.
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators. might also have to do with the network connections on the pc. like i said in another post, i noticed a new network connection appears when you sync the phone, unlike in wm6.0. another thing is i would have problems with activesync everytime i flashed to a new rom without doing a uninstall & reinstall of activesync.
Se7eN43 said:
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators.
Click to expand...
Click to collapse
Shouldn't be operator issue. Worked great prior to updating to 6.1. (T-Mobile USA)
What rom are you using?
damn u were quick to respond. i edited my first post. im usin the new v15 rom. and tmobile is my operator.
ediit: i just messed with my settings and went back to how i had them before and now its not letting me do the internet share. hmm... this is not cool
Iv used V14, V8 and V5 and none of them allow my internet sharing to work. V5 worked at first but then stopped.
I really like 6.1 but I NEED that internet sharing
WHAT settings are talking of? that work for you?
INTERNET VIA USB PROBLEM SOLVED!!!!
ok i think the problem may be with activesync. like i said, in my second post edited, i had messed with the advance settings of connections menu, and reverted back and it stopped net sharin via usb. i noticed activesync gave me an error sayin somethin about not being able to fully connect but i was still able to browse my phone, also giving me a constant animation of the activesync icon, saying "connecting" never stopping when a full connection is establish. when i fixed this and the icon stopped turning and said "connected" i tried and it worked.
on a fresh install of the past couple of roms, this is what i did... (from an earlier post of mine)
this is what i did. use the "connection setup" in the accessories folder. choose country & operator. dont think it matters but i also selected "Enable Auto Configuration" under the menu.
in explorer, under "menu/tools/options/connections" Auto.Detect Settings is selected. under "Select Network" choose The Internet.
now go into ur phones "Connection" settings, select "GPRS". in my case, select, "T-Mobile WModem Link", under "Connects to", select The Internet. for other operators, guess look for somethin similar. now u should be able to share via usb.
one thing u might have to do is, delete whatever gprs settings u have now and power off and back on. then do the above.
sorry if this is so messy looking
Can you post the entry "seetings" for "T-Mobile WModem Link"
I manually entered my connections.
So i dont have the modem link

Live Messenger on SFR Diamond

I've got a diamond of SFR pack of france. i didn't find windows live programs so i tried many cabs i can found (include 10.6.39, 10.6.34 and 10.6.32 on this site). but, unfortunately, none of them works on my phone. (windows live works stucks/verylow cannot sign in and messenger cannot start)
the only one who works is the official 10.6.0040 with i downloaded on mobile.microsoft.com, but it doesn't have a messenger in it.
what should i do? flash another rom or who can give me a cab which can works on a SFR packed Diamond.
thanks in advance.
Some additional infos:
the version 10.6.34 works fin on my HTC P3600. i've tried it and messenger get connected with USB Cable.
x_sliver said:
I've got a diamond of SFR pack of france. i didn't find windows live programs so i tried many cabs i can found (include 10.6.39, 10.6.34 and 10.6.32 on this site). but, unfortunately, none of them works on my phone. (windows live works stucks/verylow cannot sign in and messenger cannot start)
the only one who works is the official 10.6.0040 with i downloaded on mobile.microsoft.com, but it doesn't have a messenger in it.
what should i do? flash another rom or who can give me a cab which can works on a SFR packed Diamond.
thanks in advance.
Click to expand...
Click to collapse
flash it...you know you want to
Same thing for me it don't work on SFR network
it try to install WindowsLive.PocketPC_50_arm.cab but it don't work too
What can we do ?
Thx
just work on wifi
but not in 3G or GPRS
SFR uses a proxy? Disable it. Try setting up an internet connection just by APN.
I have the same issue with Vodafone. Just uncheck 'this connection uses a proxyserver'.
Be sure though, that there are not going to come more data-costs!
Here, the only disadvantage is that vodafone LIVE is not working without the proxy ... but ... whatever
hi, i've tried wifi and usb, it doesn't work. the problem is Windows Live can't be started. so i flashed the 1.93.456 WWE rom. it has a 10.6.0039 version of windows live, i tried it, works on usb.
but this rom doesn't have a AGPS settings (but we can enabled it by Advanced Config software), and has a QuickGPS.
i already try the 10.6.0039 version of windows live
it doesn't work
can't use my e-mail box on TF3d T-T
have you got the link for the 10.6.0040 version ?
thx
try on 10.6.0040 doesn't work
need help
Go to start>settings>connections>open connections>click on <set up my proxy server>and uncheck <This network uses a proxy server to connect to the internet
Try it and let me know...
It Doesn't Work
liamhere said:
flash it...you know you want to
Click to expand...
Click to collapse
i agree...lol....its the best solution for all probs and only gets better...hehe
already flash with the euro rom 1.37... + Radio v1.00.25.05
SFR sucks when it's about Windows Live, this module is deleted from Windows mobile for EVERY PHONE they sell. Maybe because of the cooperation between Windows Live and Orange, maybe they just want you to pay more to get the service.
Wifi should work with messenger i think
I can share my two cents about that matter.
SFR deliberatly block the TCP ports used by the MSN protocol and also the SMTP and POP3 ports (and maybe others I'm not aware of) in the wapsfr gateway to force us to use their own applications. One java app to do MSN chat (available on the wap site for the phones recognized by the wap gateway) but each message sent is billed (I don't rmember how much).
The only way to use these apps via GPRS/UMTS network is to subscribe the SFR WEB option and connect using the "web SFR" network.
Yeah, you can't use msn with wap. What you can do is using their own application, messenger by sfr. I must admit It's just bull****, but it works.
Here it is (it's a java application ) :
http://rapidshare.com/files/133142085/mbysfr.jar
Btw, you can't zoom... put your glasses on
Either you have to suscribe to waeb sfr as tns said, and it'll cost you a lot

how to configure hermes with wm 6.1 as a wireless ap

I am using a custom wm 6.1 on my Hermes.
It also has internet sharing on wireless interface feature.
But how can I configure the Hermes as a wireless ap that would enable connection to itself ?
When I create a new wireless ssid with infrastructure (not ad hoc) settings, it is not enabled (because it can't find that ssid)
any ideas ?
shall I need a 3rd party software for this ?
Have you tried this yet?
http://forum.xda-developers.com/showthread.php?t=377047
zocster said:
Have you tried this yet?
http://forum.xda-developers.com/showthread.php?t=377047
Click to expand...
Click to collapse
Thanks but it says :
"ICS Control is a GUI front-end for Internet Connection Sharing, a component of Microsoft Windows Mobile. It can be configured to do a variety of things including sharing your cellular internet connection over an adhoc WiFi network."
So it des not support infrasttructure mode.
Pardon me i misunderstood you
http://forum.xda-developers.com/showthread.php?t=341398
http://forum.xda-developers.com/showthread.php?t=357152
wmwifirouter is a nice application but it also is limited with ad-hoc networks.
at least that's what I understand when I installed it.
is there an application that would work on infrastructure wireless mode ?
You will need:
Insulated pockets to stop your leg burning
10 batteries to get through the day.
patp said:
You will need:
Insulated pockets to stop your leg burning
10 batteries to get through the day.
Click to expand...
Click to collapse
good point
anyway, I would be happy if I could at least do it for 15-20 minutes when I need it. Not whole day
I guess we are out of ideas.
So can we say it is impossible ?
I also wrote to WMWifiRouter Support. Their reply is like "we are working on it but it is not likely to support infrastructure any time soon"
I just wanted to check again. in case, anyone has any other suggestions...
I found this one
http://forum.xda-developers.com/showthread.php?t=332360
zocster said:
I found this one
http://forum.xda-developers.com/showthread.php?t=332360
Click to expand...
Click to collapse
unfortunately , it is again describing "ad-hoc" mode use.
I need infrastructure mode.
mrmrmrmr said:
unfortunately , it is again describing "ad-hoc" mode use.
I need infrastructure mode.
Click to expand...
Click to collapse
Correct me if I am wrong I don't think the driver supports it.
zocster said:
Correct me if I am wrong I don't think the driver supports it.
Click to expand...
Click to collapse
I believe "nothing is impossible" ; it's just that there is no coder to write the code.

Categories

Resources