Related
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
You might have better luck asking for assistance on this subject in the Artemis upgrading forum:
http://forum.xda-developers.com/forumdisplay.php?f=318
andreazzo said:
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
Click to expand...
Click to collapse
Hard Spl??? For the Artmes?? Mate are you trying to brick your device cause it seems you are doing a pretty good job of it too,Hard Spl is NOT for the p3300 it is for the Hermes and Trinity which are two very very different models of HTC. Please make an effort to read the Wiki before you start messing with the phone.Try flashing the t-mobile stock rom FOR THE ARTEMIS(WITHOUT THE HARD SPL) and hopefully it may work also find out from your buyer if it is CID unlocked though i doubt wether they would know.
Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked. That's caught me out in the past after making changes.
This is assuming that others in this forum are correct and you've not yet made a brick using the wrong model. Good luck!
One problem more on rom
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
andreazzo said:
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
Click to expand...
Click to collapse
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
arvind09 said:
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
Click to expand...
Click to collapse
T-Mobile Here
Did you buy it in China?
If you bought the phone in China, there will be 2 versions. 1 for the chinese market (han huo) and the others are for other markets (usually europe) then flashed with the chinese rom (shui huo). As far as I know the chinese versions aren't locked and the foreign market versions musn't be locked either due to the fact that they have to put on the chinese rom
hello, i am kinda new to this scene, but i mean no harm
I don't know everything but am eager to learn.
so i gonna ask some newbee questions and maybe i didn't read everything but hell, there is no harm asking
i just bought the diamond (in the dutch language, i've seen a couple more dutch ppl so if there is some one that knows alot, please add me @ msn : Deleted for Users Privacy You don't know Which Creep will add you, Use the Safe PM Method)
now i have some questions
- how can i extract my current rom? and can i use that extracted rom as a backup when i accidentily flash the wrong rom, or just want to have it back to the old way
- what is hard spl, i know it has something to do with the signing of other roms than the original rom, what are the dangers about flashing the spl, can it do any harm to my diamond? and can i go back to the original settings (and also, how about warranty?)
- before i had the Diamond, i had the Herald (P4350) and i bricked it twice, can this also happen with the diamond? or isn't that possible couze the SPL can be flashed (it wasn't possible with my p4350, thats why it was bricked )
i ask this questions becouse i want to get the maximum from my diamond, but i also have a contract on my provider and can't get a new phone in 2 years, don't want to waste my diamond on a stupid accident
if you think i am a noob, i am. but don't reply if you don't have any thing intresting to tell.
please don't tell me to use the search, becouse there are verry much topics and i can't get an hold of it, that's why i am asking it here.
Thank you verry much,
regards,
Sam
Im not ENORMOUSLY qualified to answer the SPL questions in depth but the General purpose of using HardSPL is that your device is freed up to use ANY ROM you wish (it has to be a diamond rom though). Hence your device is not limited to ROMs by your carrier:
Originally if you bought a Tmobile handset it is usually CID locked to only allow tmobile ROMS, with HArdSPL it allows any diamond ROM, so you could use on by HTC...or a cooked ROM found on this forum!
Also HardSPL has had a tradition of safeguarding against some of the types of brick possible, this may be the case with the version for the diamond but id probably let cmonex or olipro comment on that as im not too sure.
By adding the signing of ROMS and radios etc...this has removed the possibility of ROMs being flashed which are known to brick devices, wether it is intentional or just an accident by a ROM chef. Only allowing signed images to be flashed makes it alot safer for the majority of users.
Just a note: I would not advise to post your e-mail in a public forum, unless you dig spam.
chribruu said:
Just a note: I would not advise to post your e-mail in a public forum, unless you dig spam.
Click to expand...
Click to collapse
yeah i know, but hell, it's only my gmail accout. got a lots of those
Maybe that is his allowed to have spam address
Anyway these questions are the same resting on my shoulders .... sadly my thread got closed.
All we want to know is how we .... backup the ROM before flashing and restoring it.
I figured the phone consists of the following:
IPL (Initial Program Loader) ... this is like a BIOS for your phone.
SPL (Secondary Program Loader) ... this will boot the actual OS.
ROM ... this is the part where WM61 etc all is?
Ext_ROM ... this is the part where HTC has put all its customizations like TF3D?
So when we use this HardSPL, we only flash the SPL ... ROM stays intact? And how do we make a backup of all this?
Also why is a hard-reset needed if only the SPL is being flashed? It would just startup and boot your ROM, or am I mistaken?
Maybe once Ive gained more knowledge about these nifty phones, I can contribute to the community too like you all do. Maybe I'll just start a "Total noob guide to the HTC Diamond" ... all I need is a start, I want to flash this thing ASAP .... but I first want to get a few simple answers which arent 100% answered by the wiki or forums (mainly how to backup ROM, radio etc etc etc BEFORE flashing).
Meh my posts tend to get longer than expected on new forums
@sfjuocekr:
- Diamond does not have an extrom.
- read kaiser/polaris/niki/etc.. (msm7xxx devices) forums and wiki, 95% of what is said there applies for the diamond too. Apply common sense to decide what is device specific or not.
Hope that serves you as a start, for example, to answer your question about rom dumping, compare these two threads:
http://forum.xda-developers.com/showthread.php?t=382609
http://forum.xda-developers.com/showthread.php?t=334680
And apply common sense, so you'll se it's the same for diamond.
sfjuocekr said:
Maybe that is his allowed to have spam address
I figured the phone consists of the following:
IPL (Initial Program Loader) ... this is like a BIOS for your phone.
Click to expand...
Click to collapse
no IPL for diamond, the radio bootloader does that job.
the rest was said by pof very nicely
btw note: when you try to apply shift/kaiser commands to dump the rom, make sure you change the sizes in the commands, to match the pdocread -l info.
mrvanx said:
Originally if you bought a Tmobile handset it is usually CID locked to only allow tmobile ROMS, with HArdSPL it allows any diamond ROM, so you could use on by HTC...or a cooked ROM found on this forum!
Also HardSPL has had a tradition of safeguarding against some of the types of brick possible, this may be the case with the version for the diamond but id probably let cmonex or olipro comment on that as im not too sure.
Click to expand...
Click to collapse
Does this mean that HardSPL is not necessary (but advisable) if your device is not CID locked to any carrier but bought directly from HTC?
Apologies for the next noob question...
demonizator said:
Does this mean that HardSPL is not necessary (but advisable) if your device is not CID locked to any carrier but bought directly from HTC?
Apologies for the next noob question...
Click to expand...
Click to collapse
HTC devices are still CID locked....to HTC ROMs, no device you can buy is SuperCID afaik.
pof said:
@sfjuocekr:
- Diamond does not have an extrom.
- read kaiser/polaris/niki/etc.. (msm7xxx devices) forums and wiki, 95% of what is said there applies for the diamond too. Apply common sense to decide what is device specific or not.
Hope that serves you as a start, for example, to answer your question about rom dumping, compare these two threads:
http://forum.xda-developers.com/showthread.php?t=382609
http://forum.xda-developers.com/showthread.php?t=334680
And apply common sense, so you'll se it's the same for diamond.
Click to expand...
Click to collapse
This is the reply on which Ive been waiting
As soon as I'm home Ill read more about it and maybe post my finding is a uniform Diamond thread ...
Also the sketch from the layout ... I made up from information I found all over the forums and wiki, I do apply common sense but I still have limited knowhow about how these phones work.
Anyway thanks alot, Ill be trying to backup my phone asap when I arrive home from work (I work for Tele2/Versatel ... dont be scared I wont do any harm )
mrvanx said:
HTC devices are still CID locked....to HTC ROMs, no device you can buy is SuperCID afaik.
Click to expand...
Click to collapse
Got you...
Seems, after reading while working, these dumps are not the biggest helpers. As in we can't yet use them to rebuild the original ROM? I might have overlooked something, will investigate further this evening after work.
My question now still is, does this also update radio and SPL?
So the HTC Diamond basicly consists of a radio ROM, then the SPL and then goes into HTC ROM with WM61 etc ...?
So upgrading to HardSPL ... doesnt touch your current ROM and allows it to boot into it fine or does it need to be signed? Why is the hardreset needed then?
Anyway Im probably asking the same questions found on other parts of the forum, sorry for that if it annoys people around here. I just want to get started with a full backup, that is restorable ... as in that I can restore my phone to factory defaults ... if needed
I have alot of coding and hardware experience, which might help the community some day when I gain more knowledge. My age was the homemade EEPROM programmers and big ZIF-sockets business, you probably know what Im aiming for
sfjuocekr said:
I just want to get started with a full backup, that is restorable ... as in that I can restore my phone to factory defaults ... if needed
Click to expand...
Click to collapse
I second that. Is there a way to do a full backup and restore to factory defaults after using hardspl and cooked roms?
SPL: you can take it from an official rom (nbhextract), if its the same version that you have, or you can dump it from the device before HardSPL'ing it. (see one of the previous threads I linked on how to pmemdump the SPL).
Radio:you can take it from an official rom (nbhextract), if its the same version that you have.
OS: Search how to reconstruct a dumped ROM, again, apply common sense
sfjuocekr said:
Why is the hardreset needed then?
Click to expand...
Click to collapse
that's just standard RUU procedure. you can hack the RUU exe to not send task 28 to cause the SPL to hard reset.
cmonex said:
you can hack the RUU exe to not send task 28 to cause the SPL to hard reset.
Click to expand...
Click to collapse
I guess that you will do that soon too, right?
Perfect job you guys!!!
Hi guys in order to make this work on my diamond Make NEW SoftBank AP setting on ANY Hermes ROM W/O cooking!. I need my Diamond to not be SuperCID... how can I make this happen ?
As for today this works on ALL my devices Hermes (Both Dopod and Softbank) and even my X7510, but not on my Diamond... Can anyone help ?
Cheers
PS... I am not sure SuperCID or Non SuperCID... but I need to make this trick work.... please ;-)
Can someone remove that retard (i learned it from Olipro ). Spamming this forum.
Yzord said:
Can someone remove that retard (i learned it from Olipro ). Spamming this forum.
Click to expand...
Click to collapse
Sorry mate but where did I spam this forum ? Why Retard ?
I am just asking a simple question, I could make the change on my Hermes thanks to this forum now I want to do the same on my Diamond...
Daimaou said:
Sorry mate but where did I spam this forum ? Why Retard ?
I am just asking a simple question, I could make the change on my Hermes thanks to this forum now I want to do the same on my Diamond...
Click to expand...
Click to collapse
nice one 5 starting your own forum rtard.
Now back onto topic, not yet you cant.
Thank you so no solution yet, so I will have to wait and look for new update on this forum.
Now as for the stats, I have no ideas why I have 5 stars and who did it, and why on earth people have to insult others... ?
friend, thats bcoz on newer devices make it SuperCID is quite hard... very hard. So basiclly they just patch a MFG bootloader and bypass CID check. So you never think in superCID and that thing...
@ everyone that thinks by answering with a **** or IDIOT or ASSHOLE in their posts is a cool reason: you think u're smart bcoz working on a Diamond is cool? remember, when u start, u dont know everything that u know today. So, pls understand... Is a newbie diamond user, as everyone here.
Where go the cool forum with members helping each other...? I think my signature reason isnt just for Herald things... Is for start THINKING about what we r turning OUR forum, OUR place... OUR home
Have a nice day for everyone
Daimaou said:
Hi guys in order to make this work on my diamond Make NEW SoftBank AP setting on ANY Hermes ROM W/O cooking!. I need my Diamond to not be SuperCID... how can I make this happen ?
As for today this works on ALL my devices Hermes (Both Dopod and Softbank) and even my X7510, but not on my Diamond... Can anyone help ?
Cheers
PS... I am not sure SuperCID or Non SuperCID... but I need to make this trick work.... please ;-)
Click to expand...
Click to collapse
i stepped on my polaris, and need to send it to hong kong for repair. so i got a x04ht (diamond) today. i guess you are looking for working wifiwake.exe. i will patch it myself tonight (i have done it for polaris myself) will upload it here for you when i am done.
could you tell me if this file works, pls?
tramuyo said:
friend, thats bcoz on newer devices make it SuperCID is quite hard... very hard. So basiclly they just patch a MFG bootloader and bypass CID check. So you never think in superCID and that thing...
Err ... SuperCID means to write region info. And that one either by patching SPL or by security unlocking the device.
The latter one needs MFG bootloader and a patched radio to write the right flag into region info.
I'm missing the reversing spirit over here ... swear words won't help anybody.
As I do not know what this "Softbank AP" is, I might not be able to help at all.
But considering theory, I'm quite sure once the dev is security unlocked it will work.
Cya,
Viper BJK
Click to expand...
Click to collapse
Click to expand...
Click to collapse
and for x05ht?
qtotter said:
could you tell me if this file works, pls?
Click to expand...
Click to collapse
this should also work with the x05ht, right?
tora201 said:
this should also work with the x05ht, right?
Click to expand...
Click to collapse
i cannot guarantee that this would work on x05ht since device id and cid could be different.
Hi folks,
if there's anybody intrested in german ROM, please let me know how to extract it from my HTC Dimond Touch.
Ciao, Buildex101
yeah, well done for posting this thread twice....
I am definetely interested! Unfortunately I don´t know how to extract the ROM, maybe one ofthe more experianced people can help.
ps: do you have the O2 ROM or the generic german ROM?
YESSSSS.. i am interested too, but i can not help u!
is it the XDA Diamond or the HTC Diamond? and which version?
Thanx in advance
WBR
Siemens Lover
Great Idea . I am also very ineressted.
Regards,
Tika
JanDaMan said:
yeah, well done for posting this thread twice....
Click to expand...
Click to collapse
I hate such since less comments. Yeah, now we know, that you are mr. perfect !
+1
HTC ROM prefered
Cendaryn said:
+1
HTC ROM prefered
Click to expand...
Click to collapse
same here!
Read the Kaiser Wiki or the dutch ROM dump thread here in diamond forum for dumping instructions.
I could also extract my original (german) htc rom - but i do not know how. if someone can put me in the right direction, i will do this.
No one uploads his ROM
OK let's start with some hints
first read this:
push me
post #18 shows you the way, but read from the beginning to understand the dump procedure.
The tool don't work ?
read this (point 6)
Come on guys, lasst es uns wagen..
i could give it a try - but is it worth trying since i only have the rom version 1.37.00.00? i think there's a newer rom out there, isn't there?
der_olli said:
i could give it a try - but is it worth trying since i only have the rom version 1.37.00.00? i think there's a newer rom out there, isn't there?
Click to expand...
Click to collapse
Yepp, mine is 1.37.407.2 GER.
JanDaMan said:
yeah, well done for posting this thread twice....
Click to expand...
Click to collapse
I didn't post it twice. The Website had problems I think. Because I did lose connection to it while posting. After that it was down. Ok, ok, it was my fault, that it was down, because I posted it twice, right?
buildex101 said:
Yepp, mine is 1.37.407.2 GER.
Click to expand...
Click to collapse
So it seems that YOU have to dump your rom However I did read that a higher number (1.37.407.2 > 1.37.00.00) does not inevitable imply a newer rom. Does someone know something about that?
Anyway I ask myself how it could be that the phone is out just a few days in germany and there are almost so much different rom versions?
Btw: Do you have an original HTC device or a branded one?
der_olli said:
So it seems that YOU have to dump your rom However I did read that a higher number (1.37.407.2 > 1.37.00.00) does not inevitable imply a newer rom. Does someone know something about that?
Anyway I ask myself how it could be that the phone is out just a few days in germany and there are almost so much different rom versions?
Btw: Do you have an original HTC device or a branded one?
Click to expand...
Click to collapse
It's HTC Touch Diamond (original and unbranded) - I'll try to extract the ROM.
Thanks... Can't wait to have the black TouchFlo
Ok, now I have 4 RAW-Files. Can anybody please explain me the next steps to do?
buildex101 said:
Ok, now I have 4 RAW-Files. Can anybody please explain me the next steps to do?
Click to expand...
Click to collapse
PLEASE, help this man. PLEASE Help us .
Step-by-Step upgrade guides for your Diamond
www.modmydiamond.info
UPDATE 23RD JULY: added some extra FAQ's..
UPGRADE GUIDES
*Complete Diamond Upgrade Guide
*Hard SPL Upgrade Guide
*Radio Upgrade Guide
FAQ's
*General FAQ
how to prevent battery drain
how to exit bootloader
how to enable GPS
How can I get iGO to work with my internal storage?
how do i perform a hard reset?
how do i get rid of exclamation marks in TF3D Music Library?
*Upgrade FAQ
[*]will flashing a new ROM wipe out my 4GB internal storage?
[*]how to return to original spl
[*]do I have to reinstall Hard-SPL after flashing a new ROM
[*]error at 0%NEW!
*Upgrade Problem FAQ
error at 0%updated!
error at 5%NEW!
after upgrading, my screen is fuzzy, flickering, or blackNEW!
It's definitely not final, but it's a start, and thought it would help the growing Diamond community here. it's actually a lot more work than what it looks like to get all the info up and organized. As always, donations are appreciated.
If you have feedback, comments, and even questions, please post in this thread so i can see how to address them in subsequent updates.
thanks to the ELITE team, ROM chefs, and everyone that made upgrading our diamonds possible!
Niceeeeeeeeeeeee
Looks good mate. Keep it coming!
My one issue with this (and only a small one!) is that .info sites are notorious for scammers. Obviously thats not a scam site but you don't wanna be tarred with same brush!
really? ha well, the main reason is that a .info is $0.99/year haha (maybe its cheap since they're only used by scammers now?)... and i don't think it hurt trinityguides being on an .info domain.. but if accessing a .com would make you feel more at home, then donate away!
LOL 99c - no wonder they are used by scammers.... !!
Looks really nice. Keep up the good work.
Hmm.. I know it sounds very stupid and yes it is.
I do not know which version I had before. It was one of the earlie Expansys Models build for UK. Does someone know which SPL was the original one?
Cheers
hmm... i don't know about that. wouldn't it be the one on the official UK ROM that's circulating? or is that without SPL?
It was an original UK-ROM. So I guess a UK device.
Bought her ein germay from a company who had the device already 2 weeks ago.
Everything was in english and the default region was set to english (uk).
Maybe I ned to have a look at the box. Maybe I can find more info about the device there.
thommic said:
It was an original UK-ROM. So I guess a UK device.
Bought her ein germay from a company who had the device already 2 weeks ago.
Everything was in english and the default region was set to english (uk).
Maybe I ned to have a look at the box. Maybe I can find more info about the device there.
Click to expand...
Click to collapse
Sorry .. got you wrong. I dont kow if a SPL is included.
Will try later.
Hey Racer ,
THANKS so much , I just used your site to do my first flash from I have now Flashed my diamond from the HK 1.34.831.1 to a malyasian 37.404 and WOW now I can use the phone as I thought it should be thanks so much for real . I mean the lag and stuf is tottally gone and I really love my phone .. I also aded totmtom and I cant think of anything other than games I might want to add
glad it helped..
update 2 July.. added a couple more faq's... more updated coming.. if anyone has suggestions for things to add, please let me know
Updated 5th July.. couple more FAQ's, and FAQ restructuring
updated 15th July.. added Radio upgrade guide.. updated Diamond upgrade guide to reflect upgrade of radio.
still to do: tweaks section.. (and whatever else you guys think of)
updated 17th july..
FAQ for 0% error
Guides now reflect Jockyw2001's hard-spls..
Really nice.
Some basics need to be Explained:
SPL,Radio,ROM differences, three parts.
What is a ROM
What is SPL and Bootloader
Why do we need HardSPL
What happens when we Flash Rom
What happens with hard reset
What happens with soft reset
What is the Radio Rom
Internal Storage and Memory difference
These basics will make a newbe more familiar with procedure.
IT's very well explained how HARDSPL install works, but when never done this, no-one will know what HARDSPL is and a newbie never is sure enough about it to just flash without asking us. And we want this Explanations, so one does not have to ask
Please help! Diamond will not boot
Hi
I did something really stupid. I was having battery drain issues with my new Touch Diomand, so I logged into HTC website to get the firmware upgrade.
I used to have an HTC Touch, and that was the only firmware available on their site, at the time I did not realise that it was the wrong one for me !
So I started installing it, it failed, and now I get the rainbow screen at startup.
I have tried hard reset, no joy. I have called HTC, they cannot help. No-one here in NZ services these phones, so I am stuck.
I have tried installing the firmware update from modmydiamond.info, but I STILL get the same problem, it just shows the rainbow screen and I cannot continue from there...
On a PC,this would be a bootstrap issue, I have no idea what to do (other than buying an iphone) any wisdom ??
That site is really nice...it introduced me to the HTCD flash world...
thanks.
Link named Hard-SPL 1.40 points to version 1.30
Hi,
On page Home -> Upgrade Guides -> Upgrade to Hard-SPL it says:
Download a Hard-SPL from the forums here
Hard-SPL 1.40 Olinex SIGNED
I succesfully downloaded and installed the Olinex Hard-SPL, but when I enter
the bootloader te tri-colour screen reads SPL-1.30 OliNex i.s.o. 1.40. What
did I do wrong? What are the differences between 1.30 and 1.40?
Thanks in advance,
Flat
P.S.: Great site!!