hello, i am kinda new to this scene, but i mean no harm
I don't know everything but am eager to learn.
so i gonna ask some newbee questions and maybe i didn't read everything but hell, there is no harm asking
i just bought the diamond (in the dutch language, i've seen a couple more dutch ppl so if there is some one that knows alot, please add me @ msn : Deleted for Users Privacy You don't know Which Creep will add you, Use the Safe PM Method)
now i have some questions
- how can i extract my current rom? and can i use that extracted rom as a backup when i accidentily flash the wrong rom, or just want to have it back to the old way
- what is hard spl, i know it has something to do with the signing of other roms than the original rom, what are the dangers about flashing the spl, can it do any harm to my diamond? and can i go back to the original settings (and also, how about warranty?)
- before i had the Diamond, i had the Herald (P4350) and i bricked it twice, can this also happen with the diamond? or isn't that possible couze the SPL can be flashed (it wasn't possible with my p4350, thats why it was bricked )
i ask this questions becouse i want to get the maximum from my diamond, but i also have a contract on my provider and can't get a new phone in 2 years, don't want to waste my diamond on a stupid accident
if you think i am a noob, i am. but don't reply if you don't have any thing intresting to tell.
please don't tell me to use the search, becouse there are verry much topics and i can't get an hold of it, that's why i am asking it here.
Thank you verry much,
regards,
Sam
Im not ENORMOUSLY qualified to answer the SPL questions in depth but the General purpose of using HardSPL is that your device is freed up to use ANY ROM you wish (it has to be a diamond rom though). Hence your device is not limited to ROMs by your carrier:
Originally if you bought a Tmobile handset it is usually CID locked to only allow tmobile ROMS, with HArdSPL it allows any diamond ROM, so you could use on by HTC...or a cooked ROM found on this forum!
Also HardSPL has had a tradition of safeguarding against some of the types of brick possible, this may be the case with the version for the diamond but id probably let cmonex or olipro comment on that as im not too sure.
By adding the signing of ROMS and radios etc...this has removed the possibility of ROMs being flashed which are known to brick devices, wether it is intentional or just an accident by a ROM chef. Only allowing signed images to be flashed makes it alot safer for the majority of users.
Just a note: I would not advise to post your e-mail in a public forum, unless you dig spam.
chribruu said:
Just a note: I would not advise to post your e-mail in a public forum, unless you dig spam.
Click to expand...
Click to collapse
yeah i know, but hell, it's only my gmail accout. got a lots of those
Maybe that is his allowed to have spam address
Anyway these questions are the same resting on my shoulders .... sadly my thread got closed.
All we want to know is how we .... backup the ROM before flashing and restoring it.
I figured the phone consists of the following:
IPL (Initial Program Loader) ... this is like a BIOS for your phone.
SPL (Secondary Program Loader) ... this will boot the actual OS.
ROM ... this is the part where WM61 etc all is?
Ext_ROM ... this is the part where HTC has put all its customizations like TF3D?
So when we use this HardSPL, we only flash the SPL ... ROM stays intact? And how do we make a backup of all this?
Also why is a hard-reset needed if only the SPL is being flashed? It would just startup and boot your ROM, or am I mistaken?
Maybe once Ive gained more knowledge about these nifty phones, I can contribute to the community too like you all do. Maybe I'll just start a "Total noob guide to the HTC Diamond" ... all I need is a start, I want to flash this thing ASAP .... but I first want to get a few simple answers which arent 100% answered by the wiki or forums (mainly how to backup ROM, radio etc etc etc BEFORE flashing).
Meh my posts tend to get longer than expected on new forums
@sfjuocekr:
- Diamond does not have an extrom.
- read kaiser/polaris/niki/etc.. (msm7xxx devices) forums and wiki, 95% of what is said there applies for the diamond too. Apply common sense to decide what is device specific or not.
Hope that serves you as a start, for example, to answer your question about rom dumping, compare these two threads:
http://forum.xda-developers.com/showthread.php?t=382609
http://forum.xda-developers.com/showthread.php?t=334680
And apply common sense, so you'll se it's the same for diamond.
sfjuocekr said:
Maybe that is his allowed to have spam address
I figured the phone consists of the following:
IPL (Initial Program Loader) ... this is like a BIOS for your phone.
Click to expand...
Click to collapse
no IPL for diamond, the radio bootloader does that job.
the rest was said by pof very nicely
btw note: when you try to apply shift/kaiser commands to dump the rom, make sure you change the sizes in the commands, to match the pdocread -l info.
mrvanx said:
Originally if you bought a Tmobile handset it is usually CID locked to only allow tmobile ROMS, with HArdSPL it allows any diamond ROM, so you could use on by HTC...or a cooked ROM found on this forum!
Also HardSPL has had a tradition of safeguarding against some of the types of brick possible, this may be the case with the version for the diamond but id probably let cmonex or olipro comment on that as im not too sure.
Click to expand...
Click to collapse
Does this mean that HardSPL is not necessary (but advisable) if your device is not CID locked to any carrier but bought directly from HTC?
Apologies for the next noob question...
demonizator said:
Does this mean that HardSPL is not necessary (but advisable) if your device is not CID locked to any carrier but bought directly from HTC?
Apologies for the next noob question...
Click to expand...
Click to collapse
HTC devices are still CID locked....to HTC ROMs, no device you can buy is SuperCID afaik.
pof said:
@sfjuocekr:
- Diamond does not have an extrom.
- read kaiser/polaris/niki/etc.. (msm7xxx devices) forums and wiki, 95% of what is said there applies for the diamond too. Apply common sense to decide what is device specific or not.
Hope that serves you as a start, for example, to answer your question about rom dumping, compare these two threads:
http://forum.xda-developers.com/showthread.php?t=382609
http://forum.xda-developers.com/showthread.php?t=334680
And apply common sense, so you'll se it's the same for diamond.
Click to expand...
Click to collapse
This is the reply on which Ive been waiting
As soon as I'm home Ill read more about it and maybe post my finding is a uniform Diamond thread ...
Also the sketch from the layout ... I made up from information I found all over the forums and wiki, I do apply common sense but I still have limited knowhow about how these phones work.
Anyway thanks alot, Ill be trying to backup my phone asap when I arrive home from work (I work for Tele2/Versatel ... dont be scared I wont do any harm )
mrvanx said:
HTC devices are still CID locked....to HTC ROMs, no device you can buy is SuperCID afaik.
Click to expand...
Click to collapse
Got you...
Seems, after reading while working, these dumps are not the biggest helpers. As in we can't yet use them to rebuild the original ROM? I might have overlooked something, will investigate further this evening after work.
My question now still is, does this also update radio and SPL?
So the HTC Diamond basicly consists of a radio ROM, then the SPL and then goes into HTC ROM with WM61 etc ...?
So upgrading to HardSPL ... doesnt touch your current ROM and allows it to boot into it fine or does it need to be signed? Why is the hardreset needed then?
Anyway Im probably asking the same questions found on other parts of the forum, sorry for that if it annoys people around here. I just want to get started with a full backup, that is restorable ... as in that I can restore my phone to factory defaults ... if needed
I have alot of coding and hardware experience, which might help the community some day when I gain more knowledge. My age was the homemade EEPROM programmers and big ZIF-sockets business, you probably know what Im aiming for
sfjuocekr said:
I just want to get started with a full backup, that is restorable ... as in that I can restore my phone to factory defaults ... if needed
Click to expand...
Click to collapse
I second that. Is there a way to do a full backup and restore to factory defaults after using hardspl and cooked roms?
SPL: you can take it from an official rom (nbhextract), if its the same version that you have, or you can dump it from the device before HardSPL'ing it. (see one of the previous threads I linked on how to pmemdump the SPL).
Radio:you can take it from an official rom (nbhextract), if its the same version that you have.
OS: Search how to reconstruct a dumped ROM, again, apply common sense
sfjuocekr said:
Why is the hardreset needed then?
Click to expand...
Click to collapse
that's just standard RUU procedure. you can hack the RUU exe to not send task 28 to cause the SPL to hard reset.
cmonex said:
you can hack the RUU exe to not send task 28 to cause the SPL to hard reset.
Click to expand...
Click to collapse
I guess that you will do that soon too, right?
Perfect job you guys!!!
Related
Dear All,
I spent a lot of hours, days, reading the posts on the forum about the Universal and upgrading it. I didn't find some answers.
I still have some open questions that I request your help in order to have a safe upgrade.
I have a Qtek 9000, that is SimLock.
I would like to Upgrade to an AKU 3.5 ROM or to one Crossbow ROM ( still under assessment)
Now my questions:
To upgrade,
I will have to upgrade bootloader, because since Aku 3.2 Rom , it needs to be 1.01. That is clear.
Edit: Opsss tried bottloader for first time and my version is 2.01 So no bootloader upgrade, but new question:
Sim Unlock works with bootloader 2.01?
1 - Do I need to SIMUNLOCK before ROM or Radio ROM upgrade? If yes:
- I will need an oficial radio ROM. Which one? Are 1.13 or 1.14 is OK?
- Must I first Simunlock and only after upgrade the bootloader?
2 -Country Code error, what is it? (Solved)
Edit : About Country error, no specific answer, but i got almost what I looked for.
Thx you all for the hard work and colaboration on this site.
Cheers
TADAA... answers
I'm afraid you didnt took your best sshot at searching, cuz 3 or 4 post above yours is a topic called "problems with upgrading?"
in this topic you will find the info AND tools you need to succesfully upgrade..
I don't know about the simlock thing, i flashed mine with the simlock on, to a cooked rom, and it works, but don't blame me if it F*CKS up your mobile i suggest that you do a bit of research in that part..
Country id error:
You get that when you try to install a rom that is from a different manufacturer/country then yours, to solve this problem look at this link
(the link to the forementioned topic)
http://forum.xda-developers.com/showthread.php?t=290234
Good luck!
bastiaanoskam said:
I'm afraid you didnt took your best sshot at searching, cuz 3 or 4 post above yours is a topic called "problems with upgrading?"
in this topic you will find the info AND tools you need to succesfully upgrade..
I don't know about the simlock thing, i flashed mine with the simlock on, to a cooked rom, and it works, but don't blame me if it F*CKS up your mobile i suggest that you do a bit of research in that part..
Country id error:
You get that when you try to install a rom that is from a different manufacturer/country then yours, to solve this problem look at this link
(the link to the forementioned topic)
http://forum.xda-developers.com/showthread.php?t=290234
Good luck!
Click to expand...
Click to collapse
I know how to solve the country error, I just would like to get more info about it.
About the other post, I will look for it, but when i made search ( last time was the last week) I didn't find the answers i look for.
Since I looked and didn't find it could you please provide a link? ( sorry)
Thx for your help.
Hi,
1. I agree with bastiaanoskam cause I think almost any question about upgrading the Universal has been answered before in this forum.
2. I don't see the need to unlock your device if you don't want to change your current provider.
3. As far as I understand the country error is due to a change in the original language for which your device was thought (look for MaUpgradeUt_noID.exe) i.e. you have a Japanese device and want to upgrade to WWE version.
4. About the bootloader, I just saw one ROM that is said it requires to upgrade your bootloader to 1.01, it was a preview AKU3.2 from i-mate but I don't really know if the upgrade is really needed. I have read it's not needed for Crossbow and also for custom cooked AKU3.5 but again every new cooked ROM usually has a thread so you can find answers there.
tripledes said:
Hi,
1. I agree with bastiaanoskam cause I think almost any question about upgrading the Universal has been answered before in this forum.
2. I don't see the need to unlock your device if you don't want to change your current provider.
3. As far as I understand the country error is due to a change in the original language for which your device was thought (look for MaUpgradeUt_noID.exe) i.e. you have a Japanese device and want to upgrade to WWE version.
4. About the bootloader, I just saw one ROM that is said it requires to upgrade your bootloader to 1.01, it was a preview AKU3.2 from i-mate but I don't really know if the upgrade is really needed. I have read it's not needed for Crossbow and also for custom cooked AKU3.5 but again every new cooked ROM usually has a thread so you can find answers there.
Click to expand...
Click to collapse
1 - I do agree that there is a lot of info about the upgrade process, I just didn't find the answer for what I'm looking for.
2 - I didn't find a post where is stated that the device should be unlock to install the new ROM, but I also din't find the oposite, so my doubt.
3 - It seems that I should try first and if I get the error, go for the alternative method. I woul like to jump this step, but if there isn't other way, well, that's life
4 - Maybe it's a bad interpretation on my side of the wiki post. Porbably only some I-mate based roms need the bottloader upgrade.
thx for the help
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
LOL, sorry mate but that really IS a noob question
works perfect !
Thanks man
doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Thank's a lot Shadowmite,
Just one last question before I try :
You're refering to the "Hard-SPL_ZakMcRofl.zip" in your first post. On the other hand, I saw you opening a thread regarding the new "Hard-SPL 1.30 MFG - Oli.zip".
Which one should I/we use, or doesn't it make any difference.
Having a SFR/Vodafone s300+ I'm a bit scared as there's no genuine rom to downgrade back to in case I get blocked.
Bye
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thank you so much!
I want to try this ROM right now, but I don´t have access to rapidshare-like sites here in my office.
Can someone upload this ROM to a public server ZIPped and RARed with password (to avoid proxy to sneak into the file... it's blocking some downloads...)
I can setup a FTP account. If someone can upload the ROM to my server, I can share the ROM with people who has the same problem with rapidshare-and-stuff sites.
Thanks!!!
installed the rom.
but....
now i want to return to the original rom and downgrading i obtain a vendor id error.
I tried to cid unlock the device also and the error i the same. any ideas that can help me?
thanks
junwei83 said:
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Click to expand...
Click to collapse
wow man ! thanks a LOT ! i really appreciate it
only a few ppl would stop and help
thanks again
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
Tried with the Olipro and everything works fine.
Big thanks to all the people on this forum always ready to help.
Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thanx, process working...
Version of this rom?
SEA or ANZ?
Thanks
I've just updated the SPL with the one provided on this post...
It seem to be the Des’ Crash-Proof SPL...
I have this informations on the screen when starting in boot loader mode:
------------------------
TRIN100
IPL-0.50
TRIN100
SPL-9.99.CP
------------------------
which versions we have to use ??
I think that you previously talking about olipro ?
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
ROM working but...
Hi there!
First of all thanks for the trouble of getting the nasty bits out of the bundle and giving us just the OS
But... (there seems to be always a "but" with WM6) I've been having some problems with this:
- VOIP is nowhere to be found, no SIP settings anywhere.
- Memory Stick corruption. From time to time my SDHC stick goes crazy, showing up strange characters for the filenames and only a soft-reset gets it back to normal.
- Did any of you guys manage to get Video Calling working?
Well... the major deal for me is the Memory Card issue... Anyone having the same problems? Any ideas?
Best,
M Addario
--
HTC P3600
any hard-spl will work for this repackaging of the release.. you're fine to proceed
yes, you have Des' crash-proof SPL
addario, there's really no need to post the same question in multiple threads..
This rom seem to not contain any ext_rom ...
The "Device Information" module dont report any EXT_ROM version ...
it's "normal" ?
The attached screen capture show the "Device information" tab.
There is no informations about the ext_rom.
I also cannot access to it thru Total Commander.
So... it seem that something is corrupted on this rom update...
Some Info....
@ Shadowmite
Dear could you please tell me from which version did you re-make this ROM & why is there no detail showing of ExtROM in Device Information.
Hi,
I'm completely new to all this but have done my best to try and figure it out for myself but I'd still like to make sure I've understood a few things correctly...
I have an SFR s300+ bought here in France. The OS is WM5 and I'd like WM6.
I have allready tried out the "off"+"camera button"= soft reset to see if I needed to install a hard SPL : I do. I've downloaded Des' Crashproof (due to the reassuring name).
I can now install that by following the guide without backing anything up yet...
Once done I will have to copy all my important info and then I will be able to flash any ROM of my choice (English, French, official or not) is that right? If I'm not mistaken and I can install any ROM, which English ROM is the best (this one looks good...)?
I'd also like to know if I have to install a radio after this or will the one I have at the moment (that works fine) be preserved?
If I do have to install a radio which do you recommend for SFR in France considering I sometimes go to Spain.
Thanks for your help
Step-by-Step upgrade guides for your Diamond
www.modmydiamond.info
UPDATE 23RD JULY: added some extra FAQ's..
UPGRADE GUIDES
*Complete Diamond Upgrade Guide
*Hard SPL Upgrade Guide
*Radio Upgrade Guide
FAQ's
*General FAQ
how to prevent battery drain
how to exit bootloader
how to enable GPS
How can I get iGO to work with my internal storage?
how do i perform a hard reset?
how do i get rid of exclamation marks in TF3D Music Library?
*Upgrade FAQ
[*]will flashing a new ROM wipe out my 4GB internal storage?
[*]how to return to original spl
[*]do I have to reinstall Hard-SPL after flashing a new ROM
[*]error at 0%NEW!
*Upgrade Problem FAQ
error at 0%updated!
error at 5%NEW!
after upgrading, my screen is fuzzy, flickering, or blackNEW!
It's definitely not final, but it's a start, and thought it would help the growing Diamond community here. it's actually a lot more work than what it looks like to get all the info up and organized. As always, donations are appreciated.
If you have feedback, comments, and even questions, please post in this thread so i can see how to address them in subsequent updates.
thanks to the ELITE team, ROM chefs, and everyone that made upgrading our diamonds possible!
Niceeeeeeeeeeeee
Looks good mate. Keep it coming!
My one issue with this (and only a small one!) is that .info sites are notorious for scammers. Obviously thats not a scam site but you don't wanna be tarred with same brush!
really? ha well, the main reason is that a .info is $0.99/year haha (maybe its cheap since they're only used by scammers now?)... and i don't think it hurt trinityguides being on an .info domain.. but if accessing a .com would make you feel more at home, then donate away!
LOL 99c - no wonder they are used by scammers.... !!
Looks really nice. Keep up the good work.
Hmm.. I know it sounds very stupid and yes it is.
I do not know which version I had before. It was one of the earlie Expansys Models build for UK. Does someone know which SPL was the original one?
Cheers
hmm... i don't know about that. wouldn't it be the one on the official UK ROM that's circulating? or is that without SPL?
It was an original UK-ROM. So I guess a UK device.
Bought her ein germay from a company who had the device already 2 weeks ago.
Everything was in english and the default region was set to english (uk).
Maybe I ned to have a look at the box. Maybe I can find more info about the device there.
thommic said:
It was an original UK-ROM. So I guess a UK device.
Bought her ein germay from a company who had the device already 2 weeks ago.
Everything was in english and the default region was set to english (uk).
Maybe I ned to have a look at the box. Maybe I can find more info about the device there.
Click to expand...
Click to collapse
Sorry .. got you wrong. I dont kow if a SPL is included.
Will try later.
Hey Racer ,
THANKS so much , I just used your site to do my first flash from I have now Flashed my diamond from the HK 1.34.831.1 to a malyasian 37.404 and WOW now I can use the phone as I thought it should be thanks so much for real . I mean the lag and stuf is tottally gone and I really love my phone .. I also aded totmtom and I cant think of anything other than games I might want to add
glad it helped..
update 2 July.. added a couple more faq's... more updated coming.. if anyone has suggestions for things to add, please let me know
Updated 5th July.. couple more FAQ's, and FAQ restructuring
updated 15th July.. added Radio upgrade guide.. updated Diamond upgrade guide to reflect upgrade of radio.
still to do: tweaks section.. (and whatever else you guys think of)
updated 17th july..
FAQ for 0% error
Guides now reflect Jockyw2001's hard-spls..
Really nice.
Some basics need to be Explained:
SPL,Radio,ROM differences, three parts.
What is a ROM
What is SPL and Bootloader
Why do we need HardSPL
What happens when we Flash Rom
What happens with hard reset
What happens with soft reset
What is the Radio Rom
Internal Storage and Memory difference
These basics will make a newbe more familiar with procedure.
IT's very well explained how HARDSPL install works, but when never done this, no-one will know what HARDSPL is and a newbie never is sure enough about it to just flash without asking us. And we want this Explanations, so one does not have to ask
Please help! Diamond will not boot
Hi
I did something really stupid. I was having battery drain issues with my new Touch Diomand, so I logged into HTC website to get the firmware upgrade.
I used to have an HTC Touch, and that was the only firmware available on their site, at the time I did not realise that it was the wrong one for me !
So I started installing it, it failed, and now I get the rainbow screen at startup.
I have tried hard reset, no joy. I have called HTC, they cannot help. No-one here in NZ services these phones, so I am stuck.
I have tried installing the firmware update from modmydiamond.info, but I STILL get the same problem, it just shows the rainbow screen and I cannot continue from there...
On a PC,this would be a bootstrap issue, I have no idea what to do (other than buying an iphone) any wisdom ??
That site is really nice...it introduced me to the HTCD flash world...
thanks.
Link named Hard-SPL 1.40 points to version 1.30
Hi,
On page Home -> Upgrade Guides -> Upgrade to Hard-SPL it says:
Download a Hard-SPL from the forums here
Hard-SPL 1.40 Olinex SIGNED
I succesfully downloaded and installed the Olinex Hard-SPL, but when I enter
the bootloader te tri-colour screen reads SPL-1.30 OliNex i.s.o. 1.40. What
did I do wrong? What are the differences between 1.30 and 1.40?
Thanks in advance,
Flat
P.S.: Great site!!
Hello everyone,
I hope I posted my first question here in the right area (if not, shame on me )
In the next few days my HTC Touch Diamond will arrive from Vodafone. I do not know if this is just in Germany but my last phone from Vodafone, a Sony Ericsson W810i, also had a "special" Vodafone-OS on it. On the W810i I was finally able to look up all the necessary information myself to make it a Vodafone-free phone. But as I read through all the available Wiki's, FAQs and other threads I am starting to see that this might be another level compared to what I have done before.
My questions concerning my new device are whether there is a possibility to change the "Vodafone-red-theme" to the original one which you also can see on HTC's homepage. Of course, the whole device should be in its original form, not just the theme, whereas the Vodafone-Services (SMS-Gateway and all the other service numbers which are needed to use the device). I think it is possible, maybe it has something to do with a "ROM-Upgrade" or so, as I have seen in a FAQ around here.
My other question is, of course, how to do that, what tools are needed etc.
In short, I need you to provide me the right link to a tutorial since here are so many and I do not know which one to take (and I do not want to screw up the device).
I hope that you can help me, if I accidentally posted this thread in the wrong forums might a moderator please be so kind to move it to the right section and notify me of my fault.
Thanks in advance and greetings from Germany (or Bavaria, to be more exact )
Zuzler
We'll let you off!
Yes, you are in the wrong section... you should be in the 'Diamond ROM development' section, but everyone is allowed one mistake (Except, myself... I have infinite mistake allowance!)
My device was vodafone branded when I got it, and that's the first thing I wanted to get rid of too.
First you need to 'Hard SPL', which unlocks the device so you can flash any ROM you wish. Then just flash your required ROM. I would highly recommend AZTOR's X2 Ultimate. He has the philosophy of keeping the ROM as close to the original stock ROM as possible, only better, stronger, faster... like the bionic man (I'm showing my age now!!).
Everything you need is in this tutorial. I followed it to the letter, and now my device is everything it should be. It's always very nerve racking the first time you flash your device, but what ever happens, there's some sharp wizard in this forum with the knowledge to get you out of the brown stuff... have fun
Hi grahamkdt,
thanks for you reply. I already thought after submitting that it would have been better to post this in the development area. I will contact a Mod immediately to solve that.
Thank you for the recommendation about the ROM, but there is still one problem for me:
Should I upgrade the "Radio" first, since in the tutorial you gave to me it is step B. Or is this just a prerequisite to not breaking anything? Are there also different versions?
Regards,
Zuzler
thread moved
now we are all happy
Wow thanks, I also contacted tnyynt for that
Can't remember...
Zuzler said:
Hi grahamkdt,
thanks for you reply. I already thought after submitting that it would have been better to post this in the development area. I will contact a Mod immediately to solve that.
Thank you for the recommendation about the ROM, but there is still one problem for me:
Should I upgrade the "Radio" first, since in the tutorial you gave to me it is step B. Or is this just a prerequisite to not breaking anything? Are there also different versions?
Regards,
Zuzler
Click to expand...
Click to collapse
I can't remember if AZTOR's ROM's include the radio. It might be worth flashing a radio first from here. I use Radio v1.09.25.23 (Quad Band) (52.51.25.26H) - no issues at all.
Or, you could ask AZTOR if radio is included in his ROM's if you're really concerned. Personally I'd just flash one first anyway...
Ok, I will ask him personally (just seen hes from Germany, too - might make some things easier)
Thanks again!
I just thought about this right now. Can the standard HTC ROM be flashed to the Tmobile TP2? Or would we have to wait for the HSPL? Im pretty sure you can flash other standard ROMs right? [like those in different languages]. So is it possible to flash an HTC ROM to the Tmo version at this point? Maybe this belongs in the ROM development section, sorry if it does, but i think its a general question.
Also, how do you check to see if you have CID unlocked your phone, [using the hardware keys]? i did a search of it, but couldnt find it again.
forgive me if im double posting, i did a search for these questions, but couldnt come up with a definitive answer. Or a clear one, for that matter. So i thought its better to ask yourself.
anyways, thanks for the time and the replies guys.
-josh.
No one? looks like 59 other people are interested.. haha. any answers?
No. I skimmed through your question quickly. I bet it's already been asked like 5 other times.
Right now, the HardSPL for our phone is being developed. Once that's done, we can flash other ROM's. Right now, we're stuck with the T-Mobile ROM. And there's no way to CID unlock yet, either. So, just wait for the HardSPL. That's all we can do. I got a PM going around, I guess they're looking for some native thing...Here's the message...
Don't forget to use the tool provided in this thread! The sooner we find somebody with a Hynix internal memory, the sooner we can have Hard-SPL on our Touch Pro 2's! If you've already done this, please ignore this message.
Do that if you wanna get the HardSPL going faster. I guess it's just like the lottery, whoever has the lucky device! That's how YOU can contribute to the community. Got it?
You can't because even if it's a stock rom, it's not customized for your device. Even if we ignore slight hardware differences, there's also the case of people with a European unlocked model being unable to install the Asian Rom because it's the "wrong" device.
solsearch said:
You can't because even if it's a stock rom, it's not customized for your device. Even if we ignore slight hardware differences, there's also the case of people with a European unlocked model being unable to install the Asian Rom because it's the "wrong" device.
Click to expand...
Click to collapse
You can, it would just have to be modified by the cook, making it a "custom ROM". That will be possible in, I'm guessing, a month, once HardSPL is working on our phones. It'll be way better with custom ROM's, but we gotta just wait.
Oh, I meant you can't right now. Not that it's impossible without the right tools and time enough. But to just download the rom and try to flash it without any extra steps or tricks isn't currently possible.
Hey Guys,
just wanted to tell you, that i am writting this post via my T-mo TP2 which i flashed via Goldcard to original HTC European Firmware.
Everything works perfectly fine!
If byou ned a Goldcard just contact cmonex.
Hopefully helped you
ImmortalShadow
ImmortalShadow said:
Hey Guys,
just wanted to tell you, that i am writting this post via my T-mo TP2 which i flashed via Goldcard to original HTC European Firmware.
Everything works perfectly fine!
If byou ned a Goldcard just contact cmonex.
Hopefully helped you
ImmortalShadow
Click to expand...
Click to collapse
Or we can wait for HardSPL, lol. That'll be easier for most, and be less bothersome for the cooks.
But it's good to hear that you got a custom ROM! I hate that T-Mo crap
Yeah, T-mo ROM really sucks...
HTC ROM runs much smoother, consuming less RAM, and allowing me to use icq and skype, which is the biggest plus.
Now my TP2 really is (In my oppinion) the best phone on the market
True, can't wait to flash a chefs rom to get rid of all the bloatware!