Develop Bugs

Big Big Big problem new rom

Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!

You might have better luck asking for assistance on this subject in the Artemis upgrading forum:
http://forum.xda-developers.com/forumdisplay.php?f=318

andreazzo said:
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
Click to expand...
Click to collapse
Hard Spl??? For the Artmes?? Mate are you trying to brick your device cause it seems you are doing a pretty good job of it too,Hard Spl is NOT for the p3300 it is for the Hermes and Trinity which are two very very different models of HTC. Please make an effort to read the Wiki before you start messing with the phone.Try flashing the t-mobile stock rom FOR THE ARTEMIS(WITHOUT THE HARD SPL) and hopefully it may work also find out from your buyer if it is CID unlocked though i doubt wether they would know.

Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked. That's caught me out in the past after making changes.
This is assuming that others in this forum are correct and you've not yet made a brick using the wrong model. Good luck!

One problem more on rom
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye

andreazzo said:
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
Click to expand...
Click to collapse
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.

arvind09 said:
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
Click to expand...
Click to collapse
T-Mobile Here

Did you buy it in China?
If you bought the phone in China, there will be 2 versions. 1 for the chinese market (han huo) and the others are for other markets (usually europe) then flashed with the chinese rom (shui huo). As far as I know the chinese versions aren't locked and the foreign market versions musn't be locked either due to the fact that they have to put on the chinese rom

Offical Rom SSPL loadermethod for p3600 d810 m700 with noSPL noIPL noRadio

For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...

hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??

doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
LOL, sorry mate but that really IS a noob question

works perfect !
Thanks man

doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!

Thank's a lot Shadowmite,
Just one last question before I try :
You're refering to the "Hard-SPL_ZakMcRofl.zip" in your first post. On the other hand, I saw you opening a thread regarding the new "Hard-SPL 1.30 MFG - Oli.zip".
Which one should I/we use, or doesn't it make any difference.
Having a SFR/Vodafone s300+ I'm a bit scared as there's no genuine rom to downgrade back to in case I get blocked.
Bye

because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.

Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thank you so much!
I want to try this ROM right now, but I don´t have access to rapidshare-like sites here in my office.
Can someone upload this ROM to a public server ZIPped and RARed with password (to avoid proxy to sneak into the file... it's blocking some downloads...)
I can setup a FTP account. If someone can upload the ROM to my server, I can share the ROM with people who has the same problem with rapidshare-and-stuff sites.
Thanks!!!

installed the rom.
but....
now i want to return to the original rom and downgrading i obtain a vendor id error.
I tried to cid unlock the device also and the error i the same. any ideas that can help me?
thanks

junwei83 said:
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Click to expand...
Click to collapse
wow man ! thanks a LOT ! i really appreciate it
only a few ppl would stop and help
thanks again

racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
Tried with the Olipro and everything works fine.
Big thanks to all the people on this forum always ready to help.

Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thanx, process working...

Version of this rom?
SEA or ANZ?
Thanks

I've just updated the SPL with the one provided on this post...
It seem to be the Des’ Crash-Proof SPL...
I have this informations on the screen when starting in boot loader mode:
------------------------
TRIN100
IPL-0.50
TRIN100
SPL-9.99.CP
------------------------
which versions we have to use ??
I think that you previously talking about olipro ?
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse

ROM working but...
Hi there!
First of all thanks for the trouble of getting the nasty bits out of the bundle and giving us just the OS
But... (there seems to be always a "but" with WM6) I've been having some problems with this:
- VOIP is nowhere to be found, no SIP settings anywhere.
- Memory Stick corruption. From time to time my SDHC stick goes crazy, showing up strange characters for the filenames and only a soft-reset gets it back to normal.
- Did any of you guys manage to get Video Calling working?
Well... the major deal for me is the Memory Card issue... Anyone having the same problems? Any ideas?
Best,
M Addario
--
HTC P3600

any hard-spl will work for this repackaging of the release.. you're fine to proceed
yes, you have Des' crash-proof SPL
addario, there's really no need to post the same question in multiple threads..

This rom seem to not contain any ext_rom ...
The "Device Information" module dont report any EXT_ROM version ...
it's "normal" ?

The attached screen capture show the "Device information" tab.
There is no informations about the ext_rom.
I also cannot access to it thru Total Commander.
So... it seem that something is corrupted on this rom update...

Some Info....
@ Shadowmite
Dear could you please tell me from which version did you re-make this ROM & why is there no detail showing of ExtROM in Device Information.

Hi,
I'm completely new to all this but have done my best to try and figure it out for myself but I'd still like to make sure I've understood a few things correctly...
I have an SFR s300+ bought here in France. The OS is WM5 and I'd like WM6.
I have allready tried out the "off"+"camera button"= soft reset to see if I needed to install a hard SPL : I do. I've downloaded Des' Crashproof (due to the reassuring name).
I can now install that by following the guide without backing anything up yet...
Once done I will have to copy all my important info and then I will be able to flash any ROM of my choice (English, French, official or not) is that right? If I'm not mistaken and I can install any ROM, which English ROM is the best (this one looks good...)?
I'd also like to know if I have to install a radio after this or will the one I have at the moment (that works fine) be preserved?
If I do have to install a radio which do you recommend for SFR in France considering I sometimes go to Spain.
Thanks for your help

probably a n00b question :)

hello, i am kinda new to this scene, but i mean no harm
I don't know everything but am eager to learn.
so i gonna ask some newbee questions and maybe i didn't read everything but hell, there is no harm asking
i just bought the diamond (in the dutch language, i've seen a couple more dutch ppl so if there is some one that knows alot, please add me @ msn : Deleted for Users Privacy You don't know Which Creep will add you, Use the Safe PM Method)
now i have some questions
- how can i extract my current rom? and can i use that extracted rom as a backup when i accidentily flash the wrong rom, or just want to have it back to the old way
- what is hard spl, i know it has something to do with the signing of other roms than the original rom, what are the dangers about flashing the spl, can it do any harm to my diamond? and can i go back to the original settings (and also, how about warranty?)
- before i had the Diamond, i had the Herald (P4350) and i bricked it twice, can this also happen with the diamond? or isn't that possible couze the SPL can be flashed (it wasn't possible with my p4350, thats why it was bricked )
i ask this questions becouse i want to get the maximum from my diamond, but i also have a contract on my provider and can't get a new phone in 2 years, don't want to waste my diamond on a stupid accident
if you think i am a noob, i am. but don't reply if you don't have any thing intresting to tell.
please don't tell me to use the search, becouse there are verry much topics and i can't get an hold of it, that's why i am asking it here.
Thank you verry much,
regards,
Sam

Im not ENORMOUSLY qualified to answer the SPL questions in depth but the General purpose of using HardSPL is that your device is freed up to use ANY ROM you wish (it has to be a diamond rom though). Hence your device is not limited to ROMs by your carrier:
Originally if you bought a Tmobile handset it is usually CID locked to only allow tmobile ROMS, with HArdSPL it allows any diamond ROM, so you could use on by HTC...or a cooked ROM found on this forum!
Also HardSPL has had a tradition of safeguarding against some of the types of brick possible, this may be the case with the version for the diamond but id probably let cmonex or olipro comment on that as im not too sure.
By adding the signing of ROMS and radios etc...this has removed the possibility of ROMs being flashed which are known to brick devices, wether it is intentional or just an accident by a ROM chef. Only allowing signed images to be flashed makes it alot safer for the majority of users.

Just a note: I would not advise to post your e-mail in a public forum, unless you dig spam.

chribruu said:
Just a note: I would not advise to post your e-mail in a public forum, unless you dig spam.
Click to expand...
Click to collapse
yeah i know, but hell, it's only my gmail accout. got a lots of those

Maybe that is his allowed to have spam address
Anyway these questions are the same resting on my shoulders .... sadly my thread got closed.
All we want to know is how we .... backup the ROM before flashing and restoring it.
I figured the phone consists of the following:
IPL (Initial Program Loader) ... this is like a BIOS for your phone.
SPL (Secondary Program Loader) ... this will boot the actual OS.
ROM ... this is the part where WM61 etc all is?
Ext_ROM ... this is the part where HTC has put all its customizations like TF3D?
So when we use this HardSPL, we only flash the SPL ... ROM stays intact? And how do we make a backup of all this?
Also why is a hard-reset needed if only the SPL is being flashed? It would just startup and boot your ROM, or am I mistaken?
Maybe once Ive gained more knowledge about these nifty phones, I can contribute to the community too like you all do. Maybe I'll just start a "Total noob guide to the HTC Diamond" ... all I need is a start, I want to flash this thing ASAP .... but I first want to get a few simple answers which arent 100% answered by the wiki or forums (mainly how to backup ROM, radio etc etc etc BEFORE flashing).
Meh my posts tend to get longer than expected on new forums

@sfjuocekr:
- Diamond does not have an extrom.
- read kaiser/polaris/niki/etc.. (msm7xxx devices) forums and wiki, 95% of what is said there applies for the diamond too. Apply common sense to decide what is device specific or not.
Hope that serves you as a start, for example, to answer your question about rom dumping, compare these two threads:
http://forum.xda-developers.com/showthread.php?t=382609
http://forum.xda-developers.com/showthread.php?t=334680
And apply common sense, so you'll se it's the same for diamond.

sfjuocekr said:
Maybe that is his allowed to have spam address
I figured the phone consists of the following:
IPL (Initial Program Loader) ... this is like a BIOS for your phone.
Click to expand...
Click to collapse
no IPL for diamond, the radio bootloader does that job.
the rest was said by pof very nicely
btw note: when you try to apply shift/kaiser commands to dump the rom, make sure you change the sizes in the commands, to match the pdocread -l info.

mrvanx said:
Originally if you bought a Tmobile handset it is usually CID locked to only allow tmobile ROMS, with HArdSPL it allows any diamond ROM, so you could use on by HTC...or a cooked ROM found on this forum!
Also HardSPL has had a tradition of safeguarding against some of the types of brick possible, this may be the case with the version for the diamond but id probably let cmonex or olipro comment on that as im not too sure.
Click to expand...
Click to collapse
Does this mean that HardSPL is not necessary (but advisable) if your device is not CID locked to any carrier but bought directly from HTC?
Apologies for the next noob question...

demonizator said:
Does this mean that HardSPL is not necessary (but advisable) if your device is not CID locked to any carrier but bought directly from HTC?
Apologies for the next noob question...
Click to expand...
Click to collapse
HTC devices are still CID locked....to HTC ROMs, no device you can buy is SuperCID afaik.

pof said:
@sfjuocekr:
- Diamond does not have an extrom.
- read kaiser/polaris/niki/etc.. (msm7xxx devices) forums and wiki, 95% of what is said there applies for the diamond too. Apply common sense to decide what is device specific or not.
Hope that serves you as a start, for example, to answer your question about rom dumping, compare these two threads:
http://forum.xda-developers.com/showthread.php?t=382609
http://forum.xda-developers.com/showthread.php?t=334680
And apply common sense, so you'll se it's the same for diamond.
Click to expand...
Click to collapse
This is the reply on which Ive been waiting
As soon as I'm home Ill read more about it and maybe post my finding is a uniform Diamond thread ...
Also the sketch from the layout ... I made up from information I found all over the forums and wiki, I do apply common sense but I still have limited knowhow about how these phones work.
Anyway thanks alot, Ill be trying to backup my phone asap when I arrive home from work (I work for Tele2/Versatel ... dont be scared I wont do any harm )

mrvanx said:
HTC devices are still CID locked....to HTC ROMs, no device you can buy is SuperCID afaik.
Click to expand...
Click to collapse
Got you...

Seems, after reading while working, these dumps are not the biggest helpers. As in we can't yet use them to rebuild the original ROM? I might have overlooked something, will investigate further this evening after work.
My question now still is, does this also update radio and SPL?
So the HTC Diamond basicly consists of a radio ROM, then the SPL and then goes into HTC ROM with WM61 etc ...?
So upgrading to HardSPL ... doesnt touch your current ROM and allows it to boot into it fine or does it need to be signed? Why is the hardreset needed then?
Anyway Im probably asking the same questions found on other parts of the forum, sorry for that if it annoys people around here. I just want to get started with a full backup, that is restorable ... as in that I can restore my phone to factory defaults ... if needed
I have alot of coding and hardware experience, which might help the community some day when I gain more knowledge. My age was the homemade EEPROM programmers and big ZIF-sockets business, you probably know what Im aiming for

sfjuocekr said:
I just want to get started with a full backup, that is restorable ... as in that I can restore my phone to factory defaults ... if needed
Click to expand...
Click to collapse
I second that. Is there a way to do a full backup and restore to factory defaults after using hardspl and cooked roms?

SPL: you can take it from an official rom (nbhextract), if its the same version that you have, or you can dump it from the device before HardSPL'ing it. (see one of the previous threads I linked on how to pmemdump the SPL).
Radio:you can take it from an official rom (nbhextract), if its the same version that you have.
OS: Search how to reconstruct a dumped ROM, again, apply common sense

sfjuocekr said:
Why is the hardreset needed then?
Click to expand...
Click to collapse
that's just standard RUU procedure. you can hack the RUU exe to not send task 28 to cause the SPL to hard reset.

cmonex said:
you can hack the RUU exe to not send task 28 to cause the SPL to hard reset.
Click to expand...
Click to collapse
I guess that you will do that soon too, right?
Perfect job you guys!!!

[TUT]Racerx's modmydiamond.info **UPDATED 23 JULY**

Step-by-Step upgrade guides for your Diamond
www.modmydiamond.info
UPDATE 23RD JULY: added some extra FAQ's..
UPGRADE GUIDES
*Complete Diamond Upgrade Guide
*Hard SPL Upgrade Guide
*Radio Upgrade Guide
FAQ's
*General FAQ
how to prevent battery drain
how to exit bootloader
how to enable GPS
How can I get iGO to work with my internal storage?
how do i perform a hard reset?
how do i get rid of exclamation marks in TF3D Music Library?
*Upgrade FAQ
[*]will flashing a new ROM wipe out my 4GB internal storage?
[*]how to return to original spl
[*]do I have to reinstall Hard-SPL after flashing a new ROM
[*]error at 0%NEW!
*Upgrade Problem FAQ
error at 0%updated!
error at 5%NEW!
after upgrading, my screen is fuzzy, flickering, or blackNEW!
It's definitely not final, but it's a start, and thought it would help the growing Diamond community here. it's actually a lot more work than what it looks like to get all the info up and organized. As always, donations are appreciated.
If you have feedback, comments, and even questions, please post in this thread so i can see how to address them in subsequent updates.
thanks to the ELITE team, ROM chefs, and everyone that made upgrading our diamonds possible!

Niceeeeeeeeeeeee

Looks good mate. Keep it coming!

My one issue with this (and only a small one!) is that .info sites are notorious for scammers. Obviously thats not a scam site but you don't wanna be tarred with same brush!

really? ha well, the main reason is that a .info is $0.99/year haha (maybe its cheap since they're only used by scammers now?)... and i don't think it hurt trinityguides being on an .info domain.. but if accessing a .com would make you feel more at home, then donate away!

LOL 99c - no wonder they are used by scammers.... !!

Looks really nice. Keep up the good work.

Hmm.. I know it sounds very stupid and yes it is.
I do not know which version I had before. It was one of the earlie Expansys Models build for UK. Does someone know which SPL was the original one?
Cheers

hmm... i don't know about that. wouldn't it be the one on the official UK ROM that's circulating? or is that without SPL?

It was an original UK-ROM. So I guess a UK device.
Bought her ein germay from a company who had the device already 2 weeks ago.
Everything was in english and the default region was set to english (uk).
Maybe I ned to have a look at the box. Maybe I can find more info about the device there.

thommic said:
It was an original UK-ROM. So I guess a UK device.
Bought her ein germay from a company who had the device already 2 weeks ago.
Everything was in english and the default region was set to english (uk).
Maybe I ned to have a look at the box. Maybe I can find more info about the device there.
Click to expand...
Click to collapse
Sorry .. got you wrong. I dont kow if a SPL is included.
Will try later.

Hey Racer ,
THANKS so much , I just used your site to do my first flash from I have now Flashed my diamond from the HK 1.34.831.1 to a malyasian 37.404 and WOW now I can use the phone as I thought it should be thanks so much for real . I mean the lag and stuf is tottally gone and I really love my phone .. I also aded totmtom and I cant think of anything other than games I might want to add

glad it helped..
update 2 July.. added a couple more faq's... more updated coming.. if anyone has suggestions for things to add, please let me know

Updated 5th July.. couple more FAQ's, and FAQ restructuring

updated 15th July.. added Radio upgrade guide.. updated Diamond upgrade guide to reflect upgrade of radio.
still to do: tweaks section.. (and whatever else you guys think of)

updated 17th july..
FAQ for 0% error
Guides now reflect Jockyw2001's hard-spls..

Really nice.
Some basics need to be Explained:
SPL,Radio,ROM differences, three parts.
What is a ROM
What is SPL and Bootloader
Why do we need HardSPL
What happens when we Flash Rom
What happens with hard reset
What happens with soft reset
What is the Radio Rom
Internal Storage and Memory difference
These basics will make a newbe more familiar with procedure.
IT's very well explained how HARDSPL install works, but when never done this, no-one will know what HARDSPL is and a newbie never is sure enough about it to just flash without asking us. And we want this Explanations, so one does not have to ask

Please help! Diamond will not boot
Hi
I did something really stupid. I was having battery drain issues with my new Touch Diomand, so I logged into HTC website to get the firmware upgrade.
I used to have an HTC Touch, and that was the only firmware available on their site, at the time I did not realise that it was the wrong one for me !
So I started installing it, it failed, and now I get the rainbow screen at startup.
I have tried hard reset, no joy. I have called HTC, they cannot help. No-one here in NZ services these phones, so I am stuck.
I have tried installing the firmware update from modmydiamond.info, but I STILL get the same problem, it just shows the rainbow screen and I cannot continue from there...
On a PC,this would be a bootstrap issue, I have no idea what to do (other than buying an iphone) any wisdom ??

That site is really nice...it introduced me to the HTCD flash world...
thanks.

Link named Hard-SPL 1.40 points to version 1.30
Hi,
On page Home -> Upgrade Guides -> Upgrade to Hard-SPL it says:
Download a Hard-SPL from the forums here
Hard-SPL 1.40 Olinex SIGNED
I succesfully downloaded and installed the Olinex Hard-SPL, but when I enter
the bootloader te tri-colour screen reads SPL-1.30 OliNex i.s.o. 1.40. What
did I do wrong? What are the differences between 1.30 and 1.40?
Thanks in advance,
Flat
P.S.: Great site!!

please help me upgrade my rom

hello people and thanks for looking. Right I would like to upgrade my
SPV M3100 to wm6, but i have no idea how. I have read through some stickys n some other threads but tbh im confused, all i get gather is i need to install hard spl ( what ever that is) then upgrade my rom using usb. The phone was on ornage but i unlocked it, now on three 3g.
here are what the id and info about my phone is :
operator version 14.211.1.613
ROM version 2.11.61.3
ROM date 5/21/07
Radio version 1.38.00.01
Model No. Herm100
any help would be must appreciated

Hello lloyd, as you can see from all the offers of help that you received, this site is full of big heads who claim to be geniuses, but when faced with a simple question reply that you should read more!
Unfortunately, it appears that most of the contributors are so illiterate and self centered that they do not have time to help people with genuine problems.
For the last six months, I have been trying to upgrade my rom, only to find links that do not work and instructions that are incomplete.
If you want any real help, you will not find it on this website.