Related
heading says it all really - i'm cid locked btw.
cheers
si
Yes, thanks to This thread.
Worth noting again, that first time around under Vista did not work, I had to dig out an XP based PC to re-flash the original T-Mobile UK WM5 ROM. I then ran the procedure a second time under XP and it worked. The OS may or may not have been the factor, first time round might have been something else. XP was required to restore the original ROM.
The update to WM6 was well worth it in my mind even if purely for the instantly noticeable speed increase of the software.
thanks gajet - i'm gettign more and more tempted. one more thing - where could i get hold of the original t-mob uk rom - just for safety.
cheers
si
if its anything like finding a WM5 tmobile NL rom i'll wish you good luck. couldn't find one after bricking my own MDA CIII trying to upgrade it to WM6.
if you brick it your only choice is to wait until the official WM6 release from tmobile UK or send it back to them for repair
hi fout
well looking at gajet's post it seems there is a uk rom out there in the wild - just wondering where i might find it....
si
I actually found you the link in the main WM6 WWE topic, it links directly to the file on rapidshare.
here you go: http://rapidshare.com/files/17854890/art_tmouk_11311001_024990_wwe_ship.exe
and good luck upgrading your device, can't wait until mine gets back
thx fout - i thought i'd seen it somewhere - you found it - cheers!
si
ok guys - i did it! worked first time - heart in mouth for 15 mins but well worth it. got all my apps working no problem and remembered to write down the t-mobile gprs settings for once!
one other benefit for uk t-mob. on web&walk standard you can't use your phone as a modem - but with this setup you can fabulous!
cheers
si
Installed it today on my MDA3c T-Mobile
But where can I configure the SMS messaging center # (+447958879879) ???
solved
from another thread (Hermes WM6) :
start>phone>menu(softkey)>options>services(tab). Select "Voicemail and Text Messages" then tap "get settings".
Hiya, that rom you posted, what rom is that? Is it an official t-mob one or is it converted from somone else? Thanks
Oh, and how does it work on the UK MDA with its missing wifi?
dannyoneill said:
Hiya, that rom you posted, what rom is that? Is it an official t-mob one or is it converted from somone else? Thanks
Oh, and how does it work on the UK MDA with its missing wifi?
Click to expand...
Click to collapse
hi danny
it works fine with the lack of wifi - just doesn't have a button in comms manager as before. the rom we're talking about in this thread is the official t-mob uk wm5 (five) rom - which is good to have in case the update goes wrong.
i'm using bepe's rom on my mda c iii and it's tons better than the original. just make sure you read the threads first for instructions.
good luck.
si
thanks, which wm6 rom do you recommend?
If anybody interested in my few hours expirience with MDA C III UK + WM6 here it is:
Device: MDA Compact III UK original ROM,
Unlocked before wth IMEI Check
First I used the USPL as advised by Pof here http://forum.xda-developers.com/showthread.php?t=311479
It didn't work first time. I had errors 260 and 270. I repeated the process and it went OK after second time. Then I flashed with the B&W V2 rom. It seemed to end OK.
Notes: Before the play I used latest SPB Backup and made full backup in FlightMode. First thing I did after waking the device in WM6 was restore from it. The process went OK. After restart I got tens of notifications about installing untrusted or something DLLs and EXEcs. After that it hanged and didn't even wanted to wake up anymore.
So - hard reset -> partial restore -> PIM data only and it worked.
Excel and Word are buggy in terms of file handling. You can forget about them for now or use only as readers.
Comm Manager was working only up to the first reset. Then all buttons are hiden under the last one in upper-left corner. You can actualy see them rendering one after another.
GPS checked using iGo 2006 - working fine.
Conclusion:
I'm going to check how it synchronises with Missing Sync on my Mac. The latest version sould work with WM6. If it works I think I'm gonna stay with it longer. Word & Excel is not used by me often enough to stop me trying this Rom. Comm Manager - though, can try to live without it.
I have just flashed with the black and blue rom and all is well apart from the comm manager, yup, all one big mess in the top left. think its something to do with wifi, it was fine on the first boot, it showed the wifi icon but now its reset its gone all funky.
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Seeing as I'm downloading at a good speed I'm assuming this hasn't been posted as yet.
A rapidshare copy is now also available:
http://rapidshare.com/files/4681657..._WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
If anyone has any other mirrors please PM me and I will add then to this post.
(PS. Admins, I thought I would start a new thread for this as the old one is up to about 35 pages)
FAQ:
====
Q1: Is This the ANZ Version or the SEA Version:
A1: This seems to be the ANZ version as it is from the ANZ site and the description of the HTC download site is: "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
Q2: I'm having trouble downloading off the HTC link, what should I do?
A2: There is a rapidshare link above, try that. If you are still having trouble PM me.
Q3: What is the difference between this version and the one released a couple of weeks ago?
A3: This is two minor revisions later - This previous release was 3.00.707.16. this is 18. Hopefully this fixed the problem some people were having with upgrading getting stuck at ~30%. EDIT: So far several people are still having this problem.
Q4: Does this ROM fix the TomTom bug involving the device code changing on each hard reset?
A4: According to a post on page 2 it does!
Q5: Is there a new SEA release?
A5: It appears HTC have re-released the same SEA rom with a new date. This seems to make sense as the problem with the original rom was partially related the 3 Australia.
Q6: Will this rom work on devices other than once branded as Dopod d810?
A6: It should, although you will need to remove the service provider lock (SPL) from your device first. Further information can be found here (do some searching and research prior to using this):
http://forum.xda-developers.com/showthread.php?t=299659&highlight=hard-spl
Q7: What is the deal with the languages?
A7: This is the World Wide English (WWE) edition which basically means it is in english. You can install this over a device which is in another language however you device will then be in english.
Q8: Will installing Hard-SPL (see Q6) void my warranty?
A8: Short answer is yet. However, you should be able to switch back to your original firmware etc prior to sending the device in for a warranty repair so you should be able to fool them.
Q9: Does this rom come with office and acrobat etc?
A9: It comes with Acrobat Reader LE and Office.
Q10: Can I read office 2007 files on my PDA with this ROM:
A10: Yes, you need this file:
http://forum.xda-developers.com/showthread.php?t=310832
Note, the link on the original post is dead, have a look at this post for the link:
http://forum.xda-developers.com/showpost.php?p=1402146&postcount=55
Thats all for now folks.
Oh yeah, shameless plug... If you need a theme for your windows mobile device (WM5 or WM6) please visit my website http://www.wm6themes.com You can also request a personalized theme on the site completely free (just upload an image and I'll create a theme for you)!
Work on HTC P3600?
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
jetlagjoe said:
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
Click to expand...
Click to collapse
I'm pretty sure it will work if your phone is SP unlocked. (Can't tell you 100% though)
A Rapidshare link has now been added for anyone having trouble with the dopod link. Rapidshare link is located in the original post.
Is this the SEA or ANZ version?
Not sure which it is. I got if off the ANZ site so I assume either they've unified them or it is ANZ.
EDIT: Just copied this of the dopod site so I assume it is ANZ - "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
EDIT2: If anyone does have links to the SEA version please post it here and I will add it to the initial post.
grahamrb said:
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Click to expand...
Click to collapse
This is a repost of ANZ Rom, with radio shipped on ANZ before and some minor change in the OS, probably a bugfix.
Main Changes:
in Application, OEMAPPS
StreamingPlayer
VideoStub
Streaming Video is now called Streaming Media
DLL
In OEMAPPS
Rtsphandler.dll
in OEMDRIVERS
rilgsm.dll
wavedev.dll
Removed CommManagerRes_dll.cab
All the other files seem to be the same: there are 1175 different files but as to me it is due to a new packaging.
The most interesting part, except streaming media, are the two new drivers rilgsm.dll and wavedev.dll
I'm trying to install these different files on my device... wavedev.dll seem to have cause my trinity to stuck at the animated boot screen with sound (a personal hack in the registry). After a soft reset the animated boot screen has been disabled. Rilgms.dll should be related to radio search and roaming switching, and probably is installed to support the new radio shipped. I've radio 1.46.00.11 and can't turn on the phone anymore
All the above is a mine investigation, if you think I'm wrong you can correct me. I'm open to learn more...
Ciao
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
itlinux said:
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
Click to expand...
Click to collapse
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Is there also a new SEA version. I don't have a Dopod device so my P3600 EMEI does not allow a download.
claros said:
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Click to expand...
Click to collapse
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
itlinux said:
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
Click to expand...
Click to collapse
No, i din't made the update and you don't need to remove any dll.
If you want you can install it, if your device id supercid. But probably you will not found any difference from the one you are using, apart from streaming media that i've never used...
Ciao e buonanotte, mi è passata la sbronza e vado a letto...
I cannot find a new SEA rom. They changed the ROM date in the website - D810 WM6 English Version Upgrade code (2007/07/10), but if you try to download it goes to the same file - D810_SEA_WM6_Upgrade_20070709 - released before.
Fixes TomTom bug and works on UK Orange SPV M700
Hi all,
Having installed this ROM last night, I just thought I would let you all know the following:-
1. It FIXES the TomTom bug/incompatability whereby the Device Code keeps changing each time you Hard Reset! For me, this is *the* MOST important fix.
2. It works perfectly on the UK Orange SPV M700 version of the Trinity. In fact, there is no need for SuperCID or any of that lark, just unlock the phone from Orange (using the sticky thread in the Trinity Upgrading forum) and away you go. My advice is to press the Reset button right at the end of the initial date/time/screen alignment setup to stop it installing the Extended ROM.
3. This is the ANZ (Aus/NZ) version of the ROM, but it IS WWE (World Wide English)
I've only been running it and using for a few hours, but currently, all seems good. Definitely worth trying I'd say.
Regards, Moz.
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Vilem said:
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Click to expand...
Click to collapse
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
tukan said:
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
Click to expand...
Click to collapse
What's the difference ?
Vilem said:
What's the difference ?
Click to expand...
Click to collapse
After this step you can flash the "NEW Dopod d810 WM6 ROM" without the 28% error.
I got several questions:
1. Can I also install it on a P3600 with German language (I know that it is in English then, but that´s better anyway)?
2. My Triny is not branded (bought from Amazon). This won´t be a problem?
3. Is it branded then, because it´s a Dopod Version?
4. Can I still install German programs like the German Tom Tom or Langenscheidt Dictionaries or do I need new versions for WM6 and/or the English BS?
5. Is a English PDA compatible with German Outlook
6. Is also Office Mobile, Acrobat etc. onboard?
7. Will I loose my guarantee?
8. Can I go back to the official German WM5 in case of Problems?
9. Can I use this Update straight from my Vista PC or do I also need to change some dll´s?
10. Are any functions like European 3G etc. disabled, when installing this Australian version?
11. When the update stucks at a certain %, can I still update the other rom to use this update later or do I have a problem then?
Please, forgive me that I post so many questions.
Thank you so much for your answers.
Ok i removed ipl and spl from this rom , changed spash screens and flashed with customRUU.
Working fine so far.
I am using my device with WM6.1 19900 build ROM for about a week. All that time the device was very stable, no lockups, no resets.
Today I upgraded my friend's device (exactly the same one) to the same ROM with the same settings and additinoal programs. On the first hour of use, he had 3 (!) hard resets that occured with no reason during a normal work.
The only change is that I changed the pagepool size of his ROM to 4Mb (mine is 6Mb). Can it possibly happen because of pp size?
ochakov said:
I am using my device with WM6.1 19900 build ROM for about a week. All that time the device was very stable, no lockups, no resets.
Today I upgraded my friend's device (exactly the same one) to the same ROM with the same settings and additinoal programs. On the first hour of use, he had 3 (!) hard resets that occured with no reason during a normal work.
The only change is that I changed the pagepool size of his ROM to 4Mb (mine is 6Mb). Can it possibly happen because of pp size?
Click to expand...
Click to collapse
No it can't be related to PP size at all.
If you had even bothered to search the forum or the Wiki you would have found the answer to your question which has been extensively covered in this forum.
Eventhough i will humour you and tell you waht to do:
1. Flash an original carrier ROM [you can find lots of them in the Wiki]
2. Hard reset
3. Install the desired ROM
4. Hard reset
5. Proceed with normal usage
If you have problems or doubts, before asking, please read the Wiki and search the forum.
Cheers.
Thanks for the quick reply.
I am pretty experienced with ROM upgrading and I did the upgrade exactly as you (and Wiki) describe!
Now I updated the pagepool back to 6Mb and reflashed the ROM.
No hard resets yet, but I am still testing. Will post the results.
It might be the problem with your ROM. Change to a different ROM and see if it fixes it!
ai6908 said:
It might be the problem with your ROM. Change to a different ROM and see if it fixes it!
Click to expand...
Click to collapse
I believe you do have a point there... Page pool can NEVER be related to hard resets...
Curiosity: From which part of India are you? PM me wiht the answer if you like
Cheers.
Ok, This is not a pagepool size. The device is still hard resetting.
How is it possible that two identical devices, the same ROM performs so differently!?
That ROM is so stable for me, I like it, but the other device just refuses it!
I will start trying other ROMs. I will try to flash the original ROM and then flash the new one again. With all the required HR in the middle.
for me hard resets did not stop until i flashed a cingular rom but i dont know if thats because i have an 8525 or the extended rom is different some how.
for example i flashed a dopod rom twice trying to fix it and only a cingular rom did the trick if your still having hard resets its worth a try
ochakov said:
Ok, This is not a pagepool size. The device is still hard resetting.
How is it possible that two identical devices, the same ROM performs so differently!?
That ROM is so stable for me, I like it, but the other device just refuses it!
I will start trying other ROMs. I will try to flash the original ROM and then flash the new one again. With all the required HR in the middle.
Click to expand...
Click to collapse
What type of hermes are both devices? Are they alike? Are they from different sub-builds? Are they HERM100, HERM200, HERM300?
Maybe the problem is related to that.
Cheers.
neva dinova said:
for me hard resets did not stop until i flashed a cingular rom but i dont know if thats because i have an 8525 or the extended rom is different some how.
for example i flashed a dopod rom twice trying to fix it and only a cingular rom did the trick if your still having hard resets its worth a try
Click to expand...
Click to collapse
Thanks, I will try to flash Singular ROM and then reflash with WM6.1
Kevlar-Source said:
What type of hermes are both devices? Are they alike? Are they from different sub-builds? Are they HERM100, HERM200, HERM300?
Maybe the problem is related to that.
Cheers.
Click to expand...
Click to collapse
These are both IMate JasJam devices sold by the same cellular provider (Cellcom) on the same date!
Both devices had the original WM5 ROM from Cellcom.
Both devices were HR before the upgrade. On the first one (mine), I flashed about 10 ROMs including both WM6 and WM6.1, before I found the perfect one (WM6.1). On the second device, I flashed it with that ROM from the beginning.
May be flashing WM6 on the other device before WM6.1 will solve the problem.
Does anybody know why this happens? How reflashing the ROM solves the problem?
So, has anyone successfully unlocked, hard spl and flashed a new ROM into an O2 Ignito?
There's so little about the O2 ignito here, but i'm thinking to get one and try a wwe Rom on it.
Thanks all
some people have them
http://forum.xda-developers.com/search.php?searchid=16183968
Ehh?
There's not much information relating to the "MDA Compact IV" either.
Windoze9t8 said:
Ehh?
There's not much information relating to the "MDA Compact IV" either.
Click to expand...
Click to collapse
True true, but don't forget it's the same hardware anyway so all of the updating applies to all 3 versions of the phone.
I personally have the MDA Compact IV and have updated ROM/SPL/Radio fine, and my friend has the O2 XDA Ignito and has also updated all 3 of his so i can confirm its safe
The XDa Ignito comes unlocked as standard - you can use any SIM card in it. As for the rest - I put Olinex 1.40 on mine and then have flashed 3 different roms from here all fine
I'm going to put a new rom on my Ignito tonight hopefully.
First though I want a copy of the original O2 rom to put back on if necessary.
So far i've managed to dump the rom from the phone to my computer, but now just need to convert that all back into a ROM somehow.
chippieuk said:
I'm going to put a new rom on my Ignito tonight hopefully.
First though I want a copy of the original O2 rom to put back on if necessary.
So far i've managed to dump the rom from the phone to my computer, but now just need to convert that all back into a ROM somehow.
Click to expand...
Click to collapse
same position here, i got the raw files and the spl but trying to find out how to build a rom with the raw files.
please update if youv managed to find anything
I also have the raw files but if I have no idea how to get these back into a normal flashable o2 rom! I am sure we will manage it if we need it for warranty purposes though if it comes to it
i think we need to start a new thread for this to get more attention, some of the advanced users will deffinitely be able to help.
its worth doing in my opinion
As has already been stated, there's loads of us XDA Ignito users on here. Within 2 days I'd flashed a new SPL and ROM onto my device. Would be nice to have the original o2 rom to roll back to if necessary but I'm perfectly happy with out it currently.
As far as I'm aware o2 are one of the few operators that don't lock their devices. Out of all the handsets I've had from them over the years I'm as yet to receive a sim locked one.
markquinton,
can you help us out with redeveloping the original o2 rom!
seems like you have some ccoking experience having a custom rom on your orbit! see my previuos post in this thread
I'm afraid I only built custom rom's from the base HTC one's made available for the Orbit originally when WM6.1 came out. I've never worked with raw files and wouldn't have the foggiest about how to get them back into a flashable state. Sorry!
hi all am hoping to get this thread going again as im having trouble geting Unsigned-Hard-SPL-Diamond-OliNex onto my ignito. did any of you guys have trouble?
Hard SPL on ignito
I managed to install the hard SPl onto my ignito, but have been unable to flash a new rom.
Think the pre-installed works well though, I just installed the original black theme as the blue o2 one is pants.
Radio upgrade has been fine.
Biggest recommendation I have is to install the VGA version of quick GPS. It REALLY made a difference to my satellite lock times from like 10 mins to about 10 secs
no problems with it works fine mine was on o2 software using latest dutty's now.
give it a go, loads faster now
Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
And STILL not available from T-Mobile UK!
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Richard van der horst said:
Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
Click to expand...
Click to collapse
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
tismij said:
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
Click to expand...
Click to collapse
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Riel said:
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Click to expand...
Click to collapse
Well,
I've used custom roms all the way from dutty's to leo's... LAst week i've flashed the new t-mobile rom. I must say it is very stable and with a few tweaks it is a very good rom.
I did this flash because always with a custom rom there was something i didn't like or didn't work. The feeling i have from this rom (I'm also on the t-mo network of course) is that this one must be tested with the best settings and the best radio for this network... because i need an stable phone.
bdanen said:
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Click to expand...
Click to collapse
so the Chech ROM also replaced your HardSPL, which you then replaced again with SPL 1.37 ?
(why replace the HardSPL again ?)
I guess I will round up a windows PC and reflash using the the rom update .exe and see if my HardSPL gets replaced.
(I kind of asumed the HardSPL never gets updated with a rom update, hence my confusion)
Shame there isnt a way to update the HardSPL without a windows PC
Should the HardSPL not get replaced by the update I can safely use the 1.37 version from xda ?
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
feestbeest said:
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
Click to expand...
Click to collapse
Did your HardSPL get updated too when you updated your rom ?
If no which HardSPL do you have now (if it is the original that is) ?
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
I made a new rom which will work on DIAMxxxxx (all) diamonds.
It's full 143mb (including SPL and RADIO, so Stock, only diam200 is removed).
IF interested I put online. Made with Olinex nbh thing,
same problem here
Riel said:
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
Click to expand...
Click to collapse
Same for me
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Riel said:
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Click to expand...
Click to collapse
Sounds great. So this includes a stock signed spl?
It is 100% the same rom, and you will not get the Device_id error.
T-mobile service-desk WILL see this is not original T-mobile rom I think because ROM name is not the same (T-mobile instead of 1.93.blabal).
sms problem
Help, I flashed this new t-mobile ROM and now I an't send SMS. They stay in postvak uit. In tried flashing another radio and settings in comm manager. But nothing happends.
Try this, I had the same problem with several other roms.
Thank you very much. I tried it and after a softreset it is possible to send SMS now.
REmoved the rom.
It's really too slow
Sorry to bump this one, but does the t mobile NL rom update the SPL to stock?