HP Ipaq 1930 - Upgrading, Modifying and Unlocking

I have a HP Ipaq 1930 with a wifi SD card (spectec 821)
Currently on WM2003, can this be upgraded? Can i run a newer version of Windows Mobile on this, and how is it done?
This is mainly because the wifi card i have doesn't come with any software , only drivers so its hard to tell which wifi networks are protected etc, also can the pda with a wifi card be setup for network security testing e.g. wep cracking etc. as i would like to use this as a wireless network testing kit for client's wireless AP's.

this is the one i have by the way:
http://rover.ebay.com/rover/1/710-53481-19255-0/1?type=2&campid=5335918419&toolid=10001&customid=pda&ext=170247836844&item=170247836844

Related

Used Socket Wireless LAN SDIO Card (WiFi) for Sale!

Hi!
Having upgraded to Blue Angel I'm selling my Wi-Fi Card.
Here are the specs:
All you need is a Pocket PC 2003 (running Windows Mobile 2003) with an SDIO slot running SDIO Now!, and you can use the SDIO WLAN Card to access the Internet, email, and corporate servers.
Now you can access enterprise and public Wi-Fi (IEEE 802.11b) Wireless LAN systems from your Pocket PC 2003 using the smallest and lightest form factor available. Socket’s SDIO Low Power Wireless LAN Card card is the industry’s first SDIO card that lets you wirelessly connect to Wi-Fi networks to access the Internet, email, and corporate servers.
Extend the reach and usefulness of your company’s wireless LAN resources. From conference rooms, training centers, and cafeterias, you are free to work, teach or study wherever you’re most productive.
The ability to work while on the road or away from the office or school is becoming more important to today’s mobile user. Public hot spots, such as coffee shops, hotels, shopping malls and airports, are offering wireless Internet access based on the 802.11b standard.
People who need to share information can meet anywhere, bringing only their mobile computers, and wirelessly transfer files either as a broadcast to all members or peer-to-peer.
The card works with a variety of WLAN security protocols. You can use the WLAN card with an open system or encrypted network with 40/64-bit or 128-bit WEP keys. The card is also compatible with 802.1x networks with EAP-TLS or PEAP, so you can connect securely without eavesdropping.
Socket designed the SDIO Low Power WLAN Card to be Battery Friendly®. When your Pocket PC is connected to a wireless LAN, the WLAN card is in idle (listening) mode about 90% of the time, with occasional short bursts of data being transmitted/received. Plus, Socket’s SDIO WLAN software offers a Power Save Mode. Using Socket’s card means that you’ll get the maximum possible battery life from your Pocket PC.
Thanks,
Chris
Would this work with the XDA Mini (magician) ?
If yes, How much do you want for it ?
It's on Ebay...
I have no idea about the magician... It worked on my Himalaya...
It depends if your SD slot is "SDIO now" enabled
Or just try on expansys.com and see if it is indicated a possible accesory.
It's on ebay:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5170986595&ssPageName=STRK:MESE:IT

Anyone using WPA-PSK ??????????????

Home LAN ok with WEP but can't connect to works WPA-PSK secured network.
I have a fairly new ROM
Operator version 5.40.1.179
Rom version 1.40.00 WWE
Rom date 03/10/05
Radio version 1.06.02
Protocol version 1337.38
ExtROM version 1.40.179 WWE
Don't really want to do another ROM upgrade unless it is ABSOLUTELY essential. Anyone have a similar ROM with a working WPA-PSK network?
When we set WPA-PSK on the Blue Angel it insists on 802.1X authentication with either smart card or certificate. Our network doesn't use either but the tick box to turn off IEEE 802.1X access is greyed out on the BA. It isn't greyed out when we use WEP.
Is there a registry setting I could amend to turn off IEEE 802.1X when WPA-PSK is activated.
Do radio upgrades also require full hard resets?
Do hope someone can help.
On the Network Key screen what are you setting in the Authentication drop down? You should be choosing WPA-PSK and Data Encryption TKIP. Uncheck if checked The Key is provided for me automatically, and enter the key in network key box. Key index should be 1 by default. You should IGNORE the 802.1x tab.
I will let others answer regarding the Radio ROM upgrade as I am not sure what exists for the BA. But I doubt that this would solve the question anyway.
Hope this helps!
Jbn,
We are doing exactly as you say (TKIP, uncheck auto key, enter key & key index 1). We haven't been trying to set the details on the 802.1x tab but when we failed to connect we took a look at it.
We have MAC filtering set up and have included the BA MAC address (as provided by vxIP). Checked and double checked the key.
Just been informed that setting EAP type to PEAP in 802.1x tab rather than smart card or certificate might help.
Fingers crossed this will fix it.
Got it working
I had it working with my K-Jam original ROM, although I would much prefer support for 802.11i/AES...
Does anyone know if AKU2 introduces support for WPA2/AES/EAP-TLS or EAP-TTLS?
Now, there's a trick I think I read here before:
type your PSK with your on-screen keyboard, not the hardware keuboard.
Give it a try and let us know.
Cheers,
Hal
Oooops! Sorry guys, BA forum... My post is partly irrelevant.
Still, try the on-screen keyboard...
Re: Got it working
hal said:
I had it working with my K-Jam original ROM, although I would much prefer support for 802.11i/AES...
Does anyone know if AKU2 introduces support for WPA2/AES/EAP-TLS or EAP-TTLS?
Now, there's a trick I think I read here before:
type your PSK with your on-screen keyboard, not the hardware keuboard.
Give it a try and let us know.
Cheers,
Hal
Oooops! Sorry guys, BA forum... My post is partly irrelevant.
Still, try the on-screen keyboard...
Click to expand...
Click to collapse
All suggestions greatly appreciated, I think I have been trying the on screen keyboard but I will recheck.
Blue Angel will not connect to 802.11G network
I thought I would try out a few of the suggestions on my home LAN even though it was working fine under WEP. Then I would be set up for the office LAN on Monday (or so I thought).
It turns out my wireless access point does not have WPA-PSK facility (I may look for a firmware upgrade tomorrow).
However when I changed the network from mixed mode to just 802.11G I was unable to connect to it. Resetting back to mixed mode & it connects ok. It would appear that my problem is not WPA-PSK but more specifically 802.11G networks. Does WPA-PSK only operate on 802.11G networks or can it run on 802.11b?
I have seen the 5 page thread on the Wizard index relating to a cab installation / registry fix to enable 802.11g access. Unfortunately the cab didn't install on the Blue Angel.
Can anyone suggest a fix and do you have 802.11g access with your Blue Angels?
BA does not have 802.11g. The Wizard supports it with appropriate ROM or Registry updates.
WPA-PSK is independent of B/G. So, yes, if your workplace is G only then this could explain the problem that you are having.
jbn said:
BA does not have 802.11g. The Wizard supports it with appropriate ROM or Registry updates.
WPA-PSK is independent of B/G. So, yes, if your workplace is G only then this could explain the problem that you are having.
Click to expand...
Click to collapse
Thanks jbn, it's starting to make sense now.
I have just made the registry entries required by the Wizard to my BA. I'll reboot and set network to g and see how it goes..............
EDIT
DID NOT WORK. Perhaps the BA hardware simply can't do 802.11g. Can anyone confirm the WiFi of the BA is different to the Wizard AND not capable of 802.11g?
IIRC, the BA uses TI's TNETW1110 chip, which does *NOT* support 802.11g at all. The code for supporting the newer TNETW1130 (which is what I think they use in the Wizard) is actually present ... which is why WiFi will become disabled if you turn on the 802.11g registry hacks in your BA ...
Stabilo said:
DID NOT WORK. Perhaps the BA hardware simply can't do 802.11g. Can anyone confirm the WiFi of the BA is different to the Wizard AND not capable of 802.11g?
Click to expand...
Click to collapse
BA cannot do 802.11g because of the hardware. Never, ever.
If you have a g access point, it must be set to mixed mode for the BA (or any b-only device) to connect. Note that while the b device is active on the network, any other g clients will see slower connect speeds because of the compatibility mode. This is why some homogeneous environments would set to disallow b connections.
As far as WPA-PSK goes, I am using it with my BA. Any connect problems I've had were always due to something set wrong on the AP. The BA is WPA, not WPA2 (a/k/a 802.11i). Also, it does not support the AES mode of encryption. So make sure your AP is set to WPA-PSK (1 is usually implied when 2 is not supported) and TKIP, not AES or TKIP+AES.
One other suggestion. If you happen to be using a certain type of Linksys AP, there was a bug in one version of the firmware whereby if you had ever entered WEP keys and then tried to switch to WPA, it wouldn't work without first clearing the WEP keys with a hard reset. I had this issue and it drove me crazy until I read about the solution.
Hope this helps,
Paul
ratazzi,
Thanks for your comments.
Don't think they will like it at work if I tell them I need to slow the network down for 50 users just so I can connect my BA
Could I connect a 802.11b wireless access point to my desktop / laptop at work (connected to the internet) and connect my BA to the access point without slowing down the rest of the network?
It is good to know that the BA can do WPA-PSK even if only at 802.11b. I realise 802.11b is fast enough for the BA but if corporate networks are running at 802.11g then the BA will fail to connect at any speed.
Any other solutions to connect a BA to 802.11g?
ActivSync is ok but I would prefer wireless.
Is there a SD LAN card that would do 802.11g (plus WPA-PSK)?
Enabling mixed mode on a decent Wireless Access Point will not force all clients to run at 11Mbps. Those that can will do 54, those that can't won't.
jbn said:
Enabling mixed mode on a decent Wireless Access Point will not force all clients to run at 11Mbps. Those that can will do 54, those that can't won't.
Click to expand...
Click to collapse
That sounds good to me jbn, thanks again.
Stabilo said:
ratazzi,
Could I connect a 802.11b wireless access point to my desktop / laptop at work (connected to the internet) and connect my BA to the access point without slowing down the rest of the network?
Click to expand...
Click to collapse
You can do that.
However your IT staff would probably go beserk.
I check regularly to ensure that none of my users has done the very thing ... One user demended that he be allowed to and got very annoyed when I refused. He didn't see anything wrong with introducing a consumer grade (read low security) AP into an environment where we had paid top dollar for AP's with heavy security and spent many many hours locking everything down as much as humanly possible.
Remember WPA-PSK is not intended for enterprise level security ... it's better than WEP but given a poor passphrase it's vulnerable.
Is there a SD LAN card that would do 802.11g (plus WPA-PSK)?
Click to expand...
Click to collapse
A quick search of google says yes. Don't know if they are any good ... perhaps you could let US know?
Some good points there Doormat.
If I use a complex passphrase (WPA-PSK) and MAC filtering I am assuming it will be relatively safe i.e. as safe as the main network since that is what the network guys have set up.
Having recently purchased an E100, 2 off E200's a C500 and a M2000, together with about 3GB of SD cards my budget is rather stretched.
As soon as I can I will pick up a SD LAN card and post my results.
Thanks for all the help from XDA-developers.
Doormat,
My attempts with google suggest 802.11g only exists for CF cards not SD cards. Or that was the comment made 8th Jan by ms mobiles http://msmobiles.com/news.php/4767.html
Do you have a link for a SD card?
802.11b devoces will impact 802.11g device!
JBN,
I have to partly disagree with you:
using mixed mode will negatively impact the throughput of you .11g network.
This is due to the protection bit that is being set then for the .11g devices/APs.
The global effect is that while the datarate of the 11g clients will be of 54Mbps (potentially), the real throughput on an enterprise grade AP will be at best around 17/18Mbps instead of 25-27Mbps.
That's a very good reason for corp netadmins to try and ban .11b devices on an 11g network...
Doormat, I agree with you. In my terminology an AP brought by an end-user in a corp network qualifies as a rogue AP and will be immediately blocked.
WPA2/802.11i/RSN with eap-tls/ttls or PEAP is the first basic rule of thumb... Even @home that's what I run. Call me paranoid ;-)
Cheers,
Hal
hal, you are technically correct of course, but the net result in most configurations is not noticeable as far as performance goes. There is a huge difference with WAPs that were forced to B for all clients when only one such client had connected amongst a set of Gs. In my (limited I accept) experience there is no practical difference for most of the time. In high bandwidth environments it is an academic discussion because in those circumstances systems should be connected using 100BaseT or GigE in a switched network rather than a collision-prone network.
Let's not lose sight of the original question though with this level of technical conversation!
Stabilo said:
Doormat,
My attempts with google suggest 802.11g only exists for CF cards not SD cards. Or that was the comment made 8th Jan by ms mobiles http://msmobiles.com/news.php/4767.html
Do you have a link for a SD card?
Click to expand...
Click to collapse
Here's what I found:
http://www.digitimes.com/bits_chips/a20060209A9053.html
I must admit ... I hadn't noticed the march release date before.
Damn - hate it when I accidentally double post!

Tunnel Data without ICS/DUN

I have searched all over. Now that WM6 is out does the OS support tunneling the data over BT so you can use the phone like a wifi adapter or 3G on your laptop using the WAP or ISPDA settings?
If not then that means I will have to upgrade my plan and get a PCM- card?
I think it is not possible, the problem is same, there is no NAT SW/HW inside TyTN and also doesnt exist driver for wifi inside TyTN, somebody correct me, if I am wrong... you cannot use TyTN as external WIFI, but as you said, you can use TyTN as 3G (GPRS, EDGE) modem via bluetooth (but with some problems on WM6) or throught USB, but you must have installed Active Sync.
http://forum.xda-developers.com/showthread.php?t=299760
lburrowes said:
I have searched all over. Now that WM6 is out does the OS support tunneling the data over BT so you can use the phone like a wifi adapter or 3G on your laptop using the WAP or ISPDA settings?
If not then that means I will have to upgrade my plan and get a PCM- card?
Click to expand...
Click to collapse

XDA EXEC (Universal) WiFi issue - SDIO WiFi Card

In order to fix my XDA EXEC WiFi with WLAN having 802.11b/g, I purchased a 'G' SDIO WiFi card from Spectec. The card does work! It has good speed (perhaps fitting the 'g' rating) and EXCELLENT.
The only problem with it is that if the unit powers off or if you remove the card, we have to soft-reset to gain access to the wlan driver again. The card will power up and flash, but there will be no connection... in fact the WIFI utility will not even open until you soft reset.
I observed many other users of our university network, having windows mobile 5 / 6 based pocket pc, are able to use WiFi. But most of them have the IEEE 802.11b/g in their devices.
Please advise how we can get the settings done in XDA EXEC to get wifi or to overcome the soft-reset problem.
Thanks a lot in advance.
mohapk said:
In order to fix my XDA EXEC WiFi with WLAN having 802.11b/g, I purchased a 'G' SDIO WiFi card from Spectec. The card does work! It has good speed (perhaps fitting the 'g' rating) and EXCELLENT.
The only problem with it is that if the unit powers off or if you remove the card, we have to soft-reset to gain access to the wlan driver again. The card will power up and flash, but there will be no connection... in fact the WIFI utility will not even open until you soft reset.
I observed many other users of our university network, having windows mobile 5 / 6 based pocket pc, are able to use WiFi. But most of them have the IEEE 802.11b/g in their devices.
Please advise how we can get the settings done in XDA EXEC to get wifi or to overcome the soft-reset problem.
Thanks a lot in advance.
Click to expand...
Click to collapse
Godd question .Ihave the same problem also ihope you have it fixed now even though your post is old ,my problem is still current .Iam reading allot of posts wm5 o2xda which is a htc universal,if anyone knows a solution please reply & iam not thread jacking as i donot mean it thatway .regards& thanx

Sprint usb pc to phone modem needed asap. wm2003se

k. i live in the woods and my dsl modem fried from lightning last night. i have a ****ty isp that can only be reachable by submitting a service request via email since i work during their service hours of 12-3pm. i have to wait a week for a new modem
tldr; i need a program and directions that have proven to work'
here's my setup
windows xp sp3
audiovox 6600(camera)
windows mobile 2003se
usb cradle
well, what is your actual problem, connect your device to gprs, put it in the cradle and if activesync is set to accept, that the device runs wireless data connections, even while cradled, your internet connection should work. your pc should simply use the devices gprs then and automatically be connected to the internet. other alternatives (in case that doesn't work) would be, if you have wi-fi on your pc, you can try and install a wi-fi router software to your device and connect your pc to it just like with a normal access point, a freeware to try would be htc wifi router, although i fairly doubt any of those programs run with wm2003, but that should give you a clou, what to look for.
problem: wm2003se has no easy way to bum internet off of, only through the usb cable
sprint is cdma
there is no 802.11 wifi on this phone.
Still looking for help.

Categories

Resources