Hello, I had the P3300 and the first time that i installed B&B 4.1, i had to downgrade the SPL version before ejecute the installer ROM.
Now with the Diamond i don´t know what steps i must to do exactly. I bought it in Vodafone and i would like to install the official version (1.93) or other custom ROM. Please help me on steps that i want to do.
Much thanks!
Jumping on the forums and asking a question that is asked all the time (without first reading) will get you a few responses you probably don't want. But to start you off, read the stickies and go to www.modmydiamond.info to begin with. I think you'll find if you spend some time reading, you'll find your answer.
Related
Dear All,
I spent a lot of hours, days, reading the posts on the forum about the Universal and upgrading it. I didn't find some answers.
I still have some open questions that I request your help in order to have a safe upgrade.
I have a Qtek 9000, that is SimLock.
I would like to Upgrade to an AKU 3.5 ROM or to one Crossbow ROM ( still under assessment)
Now my questions:
To upgrade,
I will have to upgrade bootloader, because since Aku 3.2 Rom , it needs to be 1.01. That is clear.
Edit: Opsss tried bottloader for first time and my version is 2.01 So no bootloader upgrade, but new question:
Sim Unlock works with bootloader 2.01?
1 - Do I need to SIMUNLOCK before ROM or Radio ROM upgrade? If yes:
- I will need an oficial radio ROM. Which one? Are 1.13 or 1.14 is OK?
- Must I first Simunlock and only after upgrade the bootloader?
2 -Country Code error, what is it? (Solved)
Edit : About Country error, no specific answer, but i got almost what I looked for.
Thx you all for the hard work and colaboration on this site.
Cheers
TADAA... answers
I'm afraid you didnt took your best sshot at searching, cuz 3 or 4 post above yours is a topic called "problems with upgrading?"
in this topic you will find the info AND tools you need to succesfully upgrade..
I don't know about the simlock thing, i flashed mine with the simlock on, to a cooked rom, and it works, but don't blame me if it F*CKS up your mobile i suggest that you do a bit of research in that part..
Country id error:
You get that when you try to install a rom that is from a different manufacturer/country then yours, to solve this problem look at this link
(the link to the forementioned topic)
http://forum.xda-developers.com/showthread.php?t=290234
Good luck!
bastiaanoskam said:
I'm afraid you didnt took your best sshot at searching, cuz 3 or 4 post above yours is a topic called "problems with upgrading?"
in this topic you will find the info AND tools you need to succesfully upgrade..
I don't know about the simlock thing, i flashed mine with the simlock on, to a cooked rom, and it works, but don't blame me if it F*CKS up your mobile i suggest that you do a bit of research in that part..
Country id error:
You get that when you try to install a rom that is from a different manufacturer/country then yours, to solve this problem look at this link
(the link to the forementioned topic)
http://forum.xda-developers.com/showthread.php?t=290234
Good luck!
Click to expand...
Click to collapse
I know how to solve the country error, I just would like to get more info about it.
About the other post, I will look for it, but when i made search ( last time was the last week) I didn't find the answers i look for.
Since I looked and didn't find it could you please provide a link? ( sorry)
Thx for your help.
Hi,
1. I agree with bastiaanoskam cause I think almost any question about upgrading the Universal has been answered before in this forum.
2. I don't see the need to unlock your device if you don't want to change your current provider.
3. As far as I understand the country error is due to a change in the original language for which your device was thought (look for MaUpgradeUt_noID.exe) i.e. you have a Japanese device and want to upgrade to WWE version.
4. About the bootloader, I just saw one ROM that is said it requires to upgrade your bootloader to 1.01, it was a preview AKU3.2 from i-mate but I don't really know if the upgrade is really needed. I have read it's not needed for Crossbow and also for custom cooked AKU3.5 but again every new cooked ROM usually has a thread so you can find answers there.
tripledes said:
Hi,
1. I agree with bastiaanoskam cause I think almost any question about upgrading the Universal has been answered before in this forum.
2. I don't see the need to unlock your device if you don't want to change your current provider.
3. As far as I understand the country error is due to a change in the original language for which your device was thought (look for MaUpgradeUt_noID.exe) i.e. you have a Japanese device and want to upgrade to WWE version.
4. About the bootloader, I just saw one ROM that is said it requires to upgrade your bootloader to 1.01, it was a preview AKU3.2 from i-mate but I don't really know if the upgrade is really needed. I have read it's not needed for Crossbow and also for custom cooked AKU3.5 but again every new cooked ROM usually has a thread so you can find answers there.
Click to expand...
Click to collapse
1 - I do agree that there is a lot of info about the upgrade process, I just didn't find the answer for what I'm looking for.
2 - I didn't find a post where is stated that the device should be unlock to install the new ROM, but I also din't find the oposite, so my doubt.
3 - It seems that I should try first and if I get the error, go for the alternative method. I woul like to jump this step, but if there isn't other way, well, that's life
4 - Maybe it's a bad interpretation on my side of the wiki post. Porbably only some I-mate based roms need the bottloader upgrade.
thx for the help
Hey people, since it seems to be getting quite popular heres the official thread for the Hermes upgrade guide ive written.
The guide has now moved to a new host so dont forget to update any links you use!!
The HTC Guide
Individual Hermes guides:
Upgrading ROMs
Upgrading Radio stack
SPL Downgrade guide
Easy custom splashscreens*
TCPMP/Coreplayer video encoding*
Upgrading SPL to HardSPL v7 (2.10.olipro)
Downgrading to WM5*
* Currently updating the guides so please check back
Please read the guide word for word and you should be successfull in carrying out the procedures described.
DO NOT pm me if you have already posted in this thread, i WILL NOT answer you if you do!
Enjoy
This Should Be Made A Sticky Or At Least Added To The Sticky That Points To The Helpful Threads.
Cheers
Great guide. this should help the noobs.
Thanks for your work on these.
MrVanX,
This is nice. Though I do not need it anymore, since I had to read the wiki and all the posts to get to where I am now, I am sure it will help reduce some of the noob questions.
I do not regret doing what I had to do, since I learned a lot during the process.
But thanks for taking the time to make this.
Thank you for the guide, I really do appreciate it.
One question though after doing a search and checking the wiki.
I checked my bootloader and it is 1.10 Oli.
I was going to load the HardSPL v3 prior to upgraded to the 1.38 radio.
One of the choices of bootloader is NOT 1.10 Oli...does this mean I do not need to do the HardSPL? Or do I still need it?
Thanks in advance...and if I missed the thread I'm prepared to smack myself across the face 20 times in restitution.
Jim
Newb-Tech-Realtor said:
Thank you for the guide, I really do appreciate it.
One question though after doing a search and checking the wiki.
I checked my bootloader and it is 1.10 Oli.
I was going to load the HardSPL v3 prior to upgraded to the 1.38 radio.
One of the choices of bootloader is NOT 1.10 Oli...does this mean I do not need to do the HardSPL? Or do I still need it?
Thanks in advance...and if I missed the thread I'm prepared to smack myself across the face 20 times in restitution.
Jim
Click to expand...
Click to collapse
You will notice in "how to upgrade HardSPL v3" the guide says "if your version is 1.10.oli or 1.11.oli select the BLUE OPTION". When you run the HardSPL v3 installer you select the force sspl option. OK?? (i changed the wording of the guide)
Excellent guides...I've updated my sig with new URLs..
U Da Man!
mrvanx said:
You will notice in "how to upgrade HardSPL v3" the guide says "if your version is 1.10.oli or 1.11.oli select the BLUE OPTION". When you run the HardSPL v3 installer you select the force sspl option. OK?? (i changed the wording of the guide)
Click to expand...
Click to collapse
Noted and thank you.
Jim
What a great guide - would have saved me endless trouble when I started upgrading (including my brick - repaired courtesy of Vodafone ) - but then again I've also learned loads the harder way.
Can you just write a guide on Un-Bricking, Cooking Roms, Installing apps, Creating Cabs, Searching, Reading the Wiki etc, etc (Hmmm, now there's a project)
Only kidding, but maybe if we can link this guide and the Unbricking thread to be the first thing a new member sees when they sign up as a member to the forums we may see less 'help I'm a ****wit' threads
Excellent guide!
Just wondering, will you be creating a "downgrade guide" for those who wish to revert everything back to their original state (OS ROM, Radio ROM & bootloader) for warranty purposes?
Thanks!
michaelfoo said:
Excellent guide!
Just wondering, will you be creating a "downgrade guide" for those who wish to revert everything back to their original state (OS ROM, Radio ROM & bootloader) for warranty purposes?
Thanks!
Click to expand...
Click to collapse
Yes, pls create a "downgrade guide" for us newbie in case we need to send in our device that is under warranty.
SPL Link broken?
Hi, it might just be my system but the SPL download link appears to be broken
Martyn
Link fixed, thanks for the heads-up!
Sorry Radio link seems broken too.
Hi, sorry to be a pain but I'm following your advise and going through the guide step by step and can't download the radio.
BTW: The SPL worked a treat, I'm planning on trying the LVMS flavour.
The links for the Radio are all working fine, are you using Winrar?? You need it for opening the radio package.
-----------------------
Bump, guide updated for HardSPL v4
mrvanx said:
Bump, guide updated for HardSPL v4
Click to expand...
Click to collapse
Hi Great Works...
But need update main menu...
Flashing individual components:
HardSPL v3
Radio v1.38.00.10
WM6 ROM Upgrade Guides:
Click to expand...
Click to collapse
V4 and not v3
Hi
I'm quite a noob, so I apologize if i ask for something already mentionned.
I'm on SPL1.09 after install of LVSW 03/20.
I want to install HardSPL v4.
- This means only the bootloader files of the rom will be modified. Am I right ?
I need to check the yellow line.
But do I need to check "Is it hardSPL" ? What is this for ?
Then, as I understand, if i install a new ROM with radio, it'll modify the SPL again ?
Thanx
Greg
sticky sweet
Hi everyone,
I'm very new to the world of cooking or flashing roms etc. I appreciate this will be quite boring to most of you, but I was hoping someone could help me understand the basics. I'm from the UK and have just brought a HTC Touch Diamond on Orange network which I am very happy with. I am however keen on the idea of trying a new, potentially faster ROM. I currently have 1.37.405.1WWE. I have read a lot of good things about Manila and some others on here (elite) but I'm unsure whether to try one or not. My first question is how hard or easy is it to install a new ROM and what could go wrong? Could a newbie potentially ruin my new phone? Can I re-install the old ROM if I don't like the new one? I have read a lot about people doing manual changes etc , but I don't know any coding. Do I need to? I have searched the forum, but couldn't find any answers to such basic questions. Please could someone help me?!?!?
Thanks
It is not very hard to flash your phone with the ROM of your choice and usually it's quite safe as long as you follow the recommended procedure. Installing HardSPL is the first step which will ensure that a cooked ROM will not "brick" your phone. This is flashed as per the normal flashing procedure. Following this, you can choose the ROM you fancy ( I use Bepe's and I am very happy with it) and flash, again using the same procedure. The cooked ROMS are much faster than the stock ROM and usually very stable. Bepe produces 2 version of his ROM, Basic and Premium, whose major difference is that Basic does not include TF3D. Finally you can also flash a Radio ROM if for whatever reason you are not happy with the connectivity features and stability provided by your current ROM.
No coding required to do any of the above.
there is a nice guide here which shows you step by step how to flash a ROM:
http://modmydiamond.info/
direct link to upgrading ROM:
http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26
I reckon the "flashing" part of your question has been answered.
Regarding the "cooking" part, what can I say... You won't learn till you do it yourself.
There are a few excellent guides out there (you can start with the xda-dev wiki)
And remember - search is your best friend. Both questions could have been answered if you'd have searched the forum.
I've just purchased a Diamond and its great, but before I start to install things on it I want to upgrade it to a newer ROM as I read its better and makes it run faster.
I've been doing lots of reading about installing ROM's and about this Hard-SPL thingo, and I'm a bit confused. Is there an idiots guide to a ROM update? I can't find one, so I figure that this thread can be the start of it.
Here is my first attempt, so please correct me where I am wrong:
IDIOTS GUIDE TO A DIAMOND ROM UPDATE
1) Backup existing ROM (how is this done?)
2) Install Hard-SPL? (which version, & How? The thread on this is very long)
3) Install new 1.93WWE ROM
4) Enjoy new ROM
G-man said:
I've just purchased a Diamond and its great, but before I start to install things on it I want to upgrade it to a newer ROM as I read its better and makes it run faster.
I've been doing lots of reading about installing ROM's and about this Hard-SPL thingo, and I'm a bit confused. Is there an idiots guide to a ROM update? I can't find one, so I figure that this thread can be the start of it.
Here is my first attempt, so please correct me where I am wrong:
IDIOTS GUIDE TO A DIAMOND ROM UPDATE
1) Backup existing ROM (how is this done?)
2) Install Hard-SPL? (which version, & How? The thread on this is very long)
3) Install new 1.93WWE ROM
4) Enjoy new ROM
Click to expand...
Click to collapse
Or else you could go here and have it done by someone else.
http://www.modmydiamond.info/
thanks, thats the sort of thing I was looking for.
####### EDITED - CUT out #######
Didn't read well enough before flaming.
^.^
adwinp said:
####### EDITED - CUT out #######
Didn't read well enough before flaming.
^.^
Click to expand...
Click to collapse
Be careful with your blood pressure.
Hello everybody,
i'm new in this forum and i'm looking for a upgrade of my HTC herm200 "WM6.0" ==> HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V1_22.09.2008 or better.
and i can't find this (please visit the link):
http://www.youtube.com/watch?v=xduNtNGXqBg
if possible in french language. thank's a lot
Hi
Firstly let me say welcome to the forum, however there are a lot of new ROM's out there in french.
I am afraid there is a lot of reading to do, firstly I would have a look at this http://forum.xda-developers.com/showthread.php?t=299462....an excellent guide on how to flash etc.
confirmation
Hello and thks,
i try to upload the ROM version and i have this picture should i continue or my version is higher then the downloaded version?
That is for installing Hard spl, it's not a rom, it's the boot loader. And it is better than stock, and helps in recovery, if something bad were to happen when you flash.
I suggest that you read quite a bit more before you just go randomly flashing, or looking for the highest build number. Newest isn't always best, and there are tons of custom built roms around here.
Check the wiki, there is tons of information there, and here in the forums already.
yes do readup. you dont want to go ahead flashing recklessly or youll end up with a bricked phone.... which is quite a useless thing to have.