Related
Good news for the dutch people!
The first dutch wm6 rom is online.
Check it here
just downloaded this Dutch rom, but I don't have the guts to run it
It looks good tough...... perhaps when i'm a bit more confidend.
(i'm a noob when it's about hardSPL, CID unluck en flashing roms)
I will try it, I'm Dutch anyway so I'm a bit obliged to test it. But I like WWE ROM's better for sure since all my software is UK based. I will post some info and screenshots here as soon as I can download again from rapidshare and flashed it.
Some screenshots:
And some more. ROM seems fine so far, will try it for a few days.
T-Rob said:
I will try it, I'm Dutch anyway so I'm a bit obliged to test it. But I like WWE ROM's better for sure since all my software is UK based. I will post some info and screenshots here as soon as I can download again from rapidshare and flashed it.
Click to expand...
Click to collapse
Funny to spot a thread here about my NLD ROM. I am still thinking of creating an official thread here (about the NLD-ROM), but i have spare time next two weeks.
I have created a Dutch and WWE version. Both have the same additional software installed. I tried to translate as much as possible to Dutch.
WWE-version:
http://www.allaboutphones.nl/forum/viewtopic.php?f=10&t=491
NLD-version:
http://www.allaboutphones.nl/forum/viewtopic.php?f=10&t=542
adewidt said:
Funny to spot a thread here about my NLD ROM. I am still thinking of creating an official thread here (about the NLD-ROM), but i have spare time next two weeks.
I have created a Dutch and WWE version. Both have the same additional software installed. I tried to translate as much as possible to Dutch.
WWE-version:
http://www.allaboutphones.nl/forum/viewtopic.php?f=10&t=491
NLD-version:
http://www.allaboutphones.nl/forum/viewtopic.php?f=10&t=542
Click to expand...
Click to collapse
Must say, the ROM was flashed without radio 1.46.30.11 but that must be because of my 1.30 Hard-SPL. Flashed it later using 1.20.
You should update http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades , this is the first Dutch WM6. Good work!
It looks good !!!
dateboy & maja
Where to find patience.cab
Ik mis de games... Waar kan ik patience vinden?
dualband said:
Where to find patience.cab
Ik mis de games... Waar kan ik patience vinden?
Click to expand...
Click to collapse
The games are in there, check Programma's > Spellen
T-Rob said:
The games are in there, check Programma's > Spellen
Click to expand...
Click to collapse
The games are not included.
I am going to create a CAB for the standard games (BubbleBreaker and Solitare). I made some changes to BubbleBreaker to improve usability. I changed the New game button to undo and the undo button to new game.
I will upload the game pack within a hour.
adewidt said:
The games are not included.
I am going to create a CAB for the standard games (BubbleBreaker and Solitare). I made some changes to BubbleBreaker to improve usability. I changed the New game button to undo and the undo button to new game.
I will upload the game pack within a hour.
Click to expand...
Click to collapse
Aha, I see it now! Only Midlet Manager is in there.
BTW: you should edit the first post and put all information in there as you did in the Dutch forum. I updated Wiki for you so now you have an "official" release on XDA!
Good work adewit!
I like your rom.
In NL: Goed werk. Ik miste alleen de games, maar die komen eraan las ik
Beter. Misschien dat je in je rom standaard Pimbackup kan opnemen. Voor de rest oke!
PS: Waar ga je de games.cab uploaden?
dualband said:
Good work adewit!
I like your rom.
In NL: Goed werk. Ik miste alleen de games, maar die komen eraan las ik
Beter. Misschien dat je in je rom standaard Pimbackup kan opnemen. Voor de rest oke!
PS: Waar ga je de games.cab uploaden?
Click to expand...
Click to collapse
I created a CAB-file for the games. Included games are BubbleBreaker and Solitare. You can find the CAB here: http://rapidshare.com/files/54398210/Standard_Games.CAB
I made a little modification in BubbleBreaker. The "New Game" left softkey is now "Undo" and "New Game" is moved to the right softkey menu. The CAB file has Dutch and English language included. On a NLD device the games are Dutch, on a WWE device English.
T-Rob said:
Aha, I see it now! Only Midlet Manager is in there.
BTW: you should edit the first post and put all information in there as you did in the Dutch forum. I updated Wiki for you so now you have an "official" release on XDA!
Click to expand...
Click to collapse
The Dutch version is the first Dutch version. The ROM itself is stable, but not everything is translated or done. For example Live Messenger is in English and the Dutch dictionary isn't activated.
I decided to put on AllAboutPhones.nl, to prevent myself for getting to much reactions at once. The forum has less users then XDA-Developers. This make it easier for me to provide support. Another problem is my English, it is worse .
As soon as the ROM reaches RC-status (Release Candidate) I will create a topic here and provide support here too. Until that time I only provide support on AllAboutPhones.nl.
Hope it is clear now
Ok here are some test results. The ROM itself is fine, this is good news for Dutch Trinity owners. The theme looks a bit like PDAVIET theme, so no remarks there. Battery life could be better, tried it with 1.46.xx.11 AND 1.50.08.11 and the results I get from bepe's ROM are better.
Pro's:
- Dutch
- Look and feel
- No real problems found. Connection GSM/HSDPA and Wifi all worked good. TomTom 6.03 worked fine.
- No major memory leaks like some other ROM's
Todo's in my opinion:
- More translating of running applications
- Some registry tweaking of big font and performance
- Some missing apps like Games or HTCTweakUI
- PLEASE CHANGE THE SPLASH SCREEN!
Good work!
WIFI not working
Well first of all excellent work on the rom. I totally love it.
But i can't connect with wifi. I have two routers, a fritzbox and a netgear both won't connect. I tried other radio roms but it still wouldn't connect so i think it might be the rom version, but i'll have to do some more testing.
I have only tested wpa-psk tkip, but not wpa-aes or wep or no encryption.
And there are different modes on both routers, G-only, B-only and mixed mode. I'll test them in the morning and see what happens
Keep up the good work!!!
happy
thnx downloadid ant try it later
nl bedankt heb hem gedownload probeer hem vanmiddag nachtdienst
Adewit: If you hold the power button for three seconds, it's asking to turn of the device. This is not translated yet, it's still in English.
The rom is stable, I had to soft reset it for just 1 time...
Can you put chronos and soft key in this rom. I would like to change the keys on the today screen.
Keep up the nice work
dualband said:
Adewit: If you hold the power button for three seconds, it's asking to turn of the device. This is not translated yet, it's still in English.
The rom is stable, I had to soft reset it for just 1 time...
Can you put chronos and soft key in this rom. I would like to change the keys on the today screen.
Keep up the nice work
Click to expand...
Click to collapse
I know about the power button. Thought I changed it, but maybe the registry key exists in two files. Not a very hard problem to solve I guess...
What is chronos? You can change the softkey with a registry editor. At this stage it is more important for me to provide a stable ROM then a ROM with a lot of programs. As soon as the ROM is stable I am willing to create serveral version (lite, standard, medium etc).
Above of all, a big thanks to *** bepe *** for all...
thanks to udk for effort
thanks elias for his patch like: autohibernate and processkiller
both for friendship...
all italian cookers that partecipate with suggestions and new ideas...
and all you that with tests, made better this rom!
and now... new Rom new OS new build......
OS 19202 build 19202 ITA Rom ITA WM 6.1
new version 2 some little improvements, (added soft to amplificate and emphatizate the headphone and speaker sounds!) and software updating like pim backup...
download it here:
http://rapidshare.com/files/102457300/ervius_3_05_WM6_1_ITA_essential__build_19202__v2.zip
start testing.....
what inside:
some screenshots...
ADVICE:
in rom is integrated sdconfig tool: if you want install all cabs, at rom flashing, create a folder called sdconfig in your storage card, insert into all cabs, provxml, tsk you want, and at customizing, allc abs will be installed automatically, if you want make all after rom installing, prepare the sdconfig folder with cabs etc.... ang goto "impostazioni->sistema->sdconfig tool", the ppc will reset, and then install all cabs automatically....
WARNING:
don't use "pocketcm keyboard" as external keyboard, it causes fast increase in size into "device.exe"m until you don't have anymore free memory on device....
I hope someone can post to the author about this bug, becouse I liked it but have this bug....
there are others goods keyboard, I can suggest "touchpal" in italian version, is shareware, but works very well, and add new, and unknown for it, words in dictionary!!!
if you want is better first of all (but not necessary!) install DES Hard SPL:
http://rapidshare.com/files/97120933/DES_Hard-SPL.TRIN_2.zip
install from windows mobile opened, the ppc stop on boot, repeat the operation, executing again "ROMUpdateUtility.exe" and after ppc remain off, soft reset and wait, now you have also DES HSPL, and then you can flash everithing you want!!
bye!
SERIAL NEED???
here the licenser, so you can use it like you want and disable the nag screen...
(you have to install this cab and execute... )
http://rapidshare.com/files/102451818/Rom_Licenser.cab
Working sip change... version 3
http://rapidshare.com/files/98489343/ervius_Sip_Selector_v3.CAB
Sd Config Tool final:
http://rapidshare.com/files/102016305/SdConfig_Tool-final.cab
(no more need autorun.exe to customize....!!!)
I obviously do not assume responsibility for any failures and / or loss of data resulting from the use of this rom.
Compliment... you're fantastic..
...the Lord Of The Roms..... Ervius Isn't Here.... Is In The Future.....
Number 1 !!! I wait !!!!
What´s new from build 19199
Hi Ervius, is the first time i read about build 19202.
What´s new in this build from 19199?, worth it to change XIP of my next ROM from build 19199 to this newer version 19202??
Thanks.
axl79 said:
Hi Ervius, is the first time i read about build 19202.
What´s new in this build from 19199?, worth it to change XIP of my next ROM from build 19199 to this newer version 19202??
Thanks.
Click to expand...
Click to collapse
I try to see ever at future, and you???
added link to download....
i ervius just a question: what is more better in this build?
marcosorano said:
i ervius just a question: what is more better in this build?
Click to expand...
Click to collapse
seems to be faster....
but is my impression, you can confermate... or not....
hei ervius just a my sudgestion... i think actualy is time to relase without touchflo cube is old fashioned and not essentiall
marcosorano said:
hei ervius just a my sudgestion... i think actualy is time to relase without touchflo cube is old fashioned and not essentiall
Click to expand...
Click to collapse
the cube is sleeping into rom until you enable it... but maybe I'll release a more essential rom!
Thanks for the rom, it's great!
can you explain what to do to enable the cube? thanks!
cavallino said:
Thanks for the rom, it's great!
can you explain what to do to enable the cube? thanks!
Click to expand...
Click to collapse
goto: start->programmi->imp. FtouchFLO->General and flag: "Enable FTouchFLO" and finally press "Done" button...
now to show cube: with a finger, from the down to up, on today screen and it appear, from left to right ar viceversa to rotate it and from up to down to close cube!
ervius said:
seems to be faster....
but is my impression, you can confermate... or not....
Click to expand...
Click to collapse
Hola ervius!
This new rom is a good news for me!
Your last rom was affected by a known well bug: email account, bluetooth pairing and wifi password disappears after a soft reset. The only rom not affected by this bug is (for now) ausdim 6.1 3.0.
I'm test ausdim rom by a week and is ok, but I want an italian rom, naturally a Ervius ROM!!!
This bug is resolved?
Cheers and thanks for your efforts!
ivansc said:
Hola ervius!
This new rom is a good news for me!
Your last rom was affected by a known well bug: email account, bluetooth pairing and wifi password disappears after a soft reset. The only rom not affected by this bug is (for now) ausdim 6.1 3.0.
I'm test ausdim rom by a week and is ok, but I want an italian rom, naturally a Ervius ROM!!!
This bug is resolved?
Cheers and thanks for your efforts!
Click to expand...
Click to collapse
I notece that I don't have theese kind of problem with this rom build and also with last 19199 build.
[EDITED]
I hardresetted and create a new mail account, only to check, and after softreset, the mails are still there, like the account, so the bugs aren't.
alf hour of testing seems litle bit faster no bug's stable and free memory ram
good work ervius nice
just installed and in testing, this rom is really a good news for me expecially if it solves the mail account/pin problem.
You are great ervius.
Really thanks for sharing your good work
Downloading it now... great job and effort for the community... thanks!!!
I did all the job today with the older release...if i only new it was going to be posted today....... now i will try to update. Thanks again.
Great job Ervius....
Thank you!!!!
According to you, is there an allarm for switched off Trinity?
Grande lavoro Ervius...
Grazie!!!!
Che tu sappia, esiste un programma "sveglia" che funziona con il telefono spento?
sliv3r said:
Great job Ervius....
Thank you!!!!
According to you, is there an allarm for switched off Trinity?
Grande lavoro Ervius...
Grazie!!!!
Che tu sappia, esiste un programma "sveglia" che funziona con il telefono spento?
Click to expand...
Click to collapse
there were a lot of discussions about it, also in italian forum... I don't know.
Hey guy,
I'm just finish my work for BenQ P51 WM6.1 Rom
Download link here:
Link1: http://rapidshare.com/files/110083411/19209_Clean_CF2_PG6MB_WWE.rar.html
Link2: http://u3.upload.sanook.com/A0/028a47762064e66cbc5c4bac012b0d6e
This a clean ROM , with 6MB of Pagepool , and installed some application.
This is the additional app:
1. GPS Viewer
2. GBS-Tweak
3. Oxios Memory
4. WM5torage
Enjoy.
Thank you
ViVi : P525 Club @ pdamobiz.com
Neogin : P51 Club @ pdamobiz.com
Pig : P51 Club @ pdamobiz.com
P51 Club : pdamobiz.com
==============================================
PS. for thai guy , let's joy us and D/L the Thai version @ pdamobiz.com P51's club
I-Mono-I
P51 club
pdamobiz.com
wow great release!
How to flush? Any procedure i.e. tools, files etc.
Is this compatible with p50?
Cheers!
This rom is support for P51 only.
GREAT JOB !!!!
vivi
vivi said:
GREAT JOB !!!!
vivi
Click to expand...
Click to collapse
Hi krub , P'Pee
I-Mono-I
WoW! Super Fast ROM, It's Rocks! Good job.
@mmxroot
Hello,
i get a P51 last week. And now i don`t no if i can do your update also on a P51-Prototyp? In a other forum i read, that i need 3 files for the XSCD-Tool. Is your update a Autoupdate? Where is all in one?
greetings
Hi bro.
With XSCD-Tools you need 3 files to flash , exactly.
But with USBDN.exe you can flashing with only one file, yes that i mean a ROM file.
Check this: http://rapidshare.com/files/111571274/USBDN.rar.html
1. press "browse" to find for a ROM file.
2. no need to check a "[ ] XIP BIN"
3. Press download to sending the ROM data to P51.
(Your P51 connected with USB flashing mode)
** after you press a Download , you may see the progress bar run so fast,
and seem like the P51 did't response for data. Please press Download again.
and wait until the P51 startup.
This tool can't run on Vista.
i'm not good at English , but i'll keep try to explain.
@mmxroot
Thanks for the file and your instruction.
My english isn`t also the best.
Greetings
fb2805
Voice Clip on Windows Live has no response when pressed.
Hi, Mate
Great Stuff!
It's well and truly working well.Thanks!
One small issue, Voice Clip on Windows Live has no response when pressed. Perhaps you might want to take a look when you get a chance.
Stephen
@mmxroot
What for a datacable need i for a update? The normally or this special datacable DIP-102? And if i should make a complete update of my device, where can i get the other files? The EP.....nb0 and the GPRS-File?
Greetings
Hi pal.
Use the standard USB cable.
I-MoNo-I
sd_tong said:
Hi, Mate
Great Stuff!
It's well and truly working well.Thanks!
One small issue, Voice Clip on Windows Live has no response when pressed. Perhaps you might want to take a look when you get a chance.
Stephen
Click to expand...
Click to collapse
Many thanks for your comment.
i'll check.
I-MoNo-I
@mmxroot
Can i change the language to german? And what are the lastest GPRS-file-version and EP...-file-version?
Greetings
hi from turkey
can you upload also WM 6.1 CE OS 5.2.19701 (Build 19701.1.1.0 by Mono)? i found it on pdamobiz.com but it is hard to download and also understand thai language so can u upload it to rapidshare?
thanks a lot
just more info
Hi, I-MoNo-I
Just a bit more info. I have been playing with your rom vs other ROMs. I have found your version being quite stable except for the Voice Clips. Other WM6 ROMs may have the Voice Clips working but not very stable particularily the bluetooth connection. The system often freezes.
I have also tried to insall Windows Live Mobil 10.6 on top of your ROM and found the same problem. It may well relate to other module(s). When Voice Clips is pressed, the system does try to record. You will find the tmp in Windows Live tmp directory but zero length. Somehow the system can't start the recording. If fixed, the ROM is nearly perfect as far as I am concerned.
Stephen
fb2805 said:
@mmxroot
Can i change the language to german? And what are the lastest GPRS-file-version and EP...-file-version?
Greetings
Click to expand...
Click to collapse
Guy...
This GPRS Image file (Radio ROM)
choose one from below..
http://www.esnips.com/doc/2b855d73-7b1e-493a-b754-eb68cef06f93/P51-GPRS-V1.09
http://www.esnips.com/doc/3c8cf1d9-2e49-4511-a484-8f24858b6cb3/P51-GPRS-V1.06
What diff ? please find out the answer by your self.
========================================================
And for the EPXXXX.bin or we call Boot loader , It's may harm your device.
If you can start your device and can see the BenQ's startup screen , you no need to touch the boot loader.
========================================================
With the ROM translating .... i have no idea for German , because i'm Thai.
and i think it's hard of work ,,,, otherwise you are a programmer and extract my ROM and translate then rebuild the ROM.
but..do you know,most of ROM on another device in my country.
We did't use Thai's user interface ,we use to read and typing only.
hi mono
can you tell me what is the difference between 19209 and 19701.because you also released this rom at another website. so can u upload 19701 rom to here?
thanks
WM6.1 CE OS 5.2.19701 (Build 19701.1.1.0 by Mono)
I did changed some thing.
1. Replace Calculator with 1-Calc
2. Adobe Reader LE
3. GPS Viewer
4. Oxios Hibernate
5. PHM RegEditor
6. PIM Backup 2.5
7. PocketRAR
8. Jeyo SMS Backup
9. Sprite Backup
10. Voice speed Dial
11. WM5torage
12. GB-Soft tweak
13. HTC TaskManager
14. Softkey Changer
15. Storage Manager
16. Add another country to Connection setting
http://rapidshare.com/files/112631850/P51_19701_CF2_PG6_WWE.rar.html
i did't know for what diff between 19209 and 19701 ,, Just find out the answser by yourself.
I-Mono-I
BenQ P51 Club @ PDAMobiz.com
Thailand
thanks a lot
buddy you are great !!
thanks a lot for this superb rom. you also help people who have benq p51 at another countries.I will use this rom and I will explain my experiments about this rom to here.
Based on Yozgatz kitchen and his amazing r1.5 port
I made this rom......why touchflo3d 2.1?because i think our diamond can't manage sense interface it has not much ram to manage this interface. I know all the graphical enhancement(htc message,contacts etcetc) that sense ui brings and in my rom i don't lose them!!!!if you want to try my rom i'll provide the download link
Version WITHOUT videocall:
GER VERSION
ITA VERSION
NLD VERSION
SPA VERSION
WWE VERSION
Version WITH videocall:
GER VERSION
ITA VERSION
NLD VERSION
SPA VERSION
WWE VERSION
Overview:
-Updated build to 21056!!!
-Increased DataCacheSize
-EzInputv2.0
-PP 12 MB (you can change manually to 10 mb with pagepool changer)
-Notification Enhancement
-Menù Enhancement
-Tachi Dialer
-Ram on startup 51%
-Radio 1.13.25.24 or newer is recomended!
-Highly CFC manila files compressed!!!!
this rom have request many hours of hard work and a lot of flash on my diamond...if you like my work....pay me a beer!!if you want to donateCLICK HERE!!!!
VIDEOCALL SUPPORT!!RHODIUM DIALER IS NOT FULLY 100% PORTED TO VGA BUT IT WORK VERY WELL AND THIS IS THE BEST THAT I'VE FOUND!!
tf3d have twitter tab?
tf3d ha il tab per twitter?
WOW! Exactly what i need. I like the Sense Roms. But what i like about a rom is its speediness.
Take stylus out, Click SMS Tab! It shud take abt a second to load, and i would be writing an sms to my friend and press send.
Thats my routine. And with Senses, it takes about 2-3 seconds for the SMS to load even.
So thats why i am with the stock rom. Ofcoz it has junk apps. But its speedy like the way i want it.
So pls...release the WWE....will be your personal beta tester for WWE....
Our diamond was not born for Sense - that why I still love TF3D - it's too bad that there are not many theme/skin for it
Wanna try this rom
Great
Great, it's my want!!!!!
Very nice
i sent you a PM. you can say this is sort of private beta testing...
hehe
Valantin said:
tf3d have twitter tab?
tf3d ha il tab per twitter?
Click to expand...
Click to collapse
no tf3d doesn't have twitter tab!!it's not supported!!!
no tf3d non ha il tab twitter!!non è supportato!!!!
Great job!!
Diamond needs this kind of rom.
But, i have a problem with camera! It doesn't work!!!
What can i do for fix it?
Please... i don't want back at original rom (onlyone rom, v.2.03 based, with TF3D isn't it?)!!!
Thanks!
lupohirp said:
no tf3d doesn't have twitter tab!!it's not supported!!!
no tf3d non ha il tab twitter!!non è supportato!!!!
Click to expand...
Click to collapse
peccato è l'unica cosa che utilizzo realmente di sense, visto che i client per wm6.x mi fanno pena
Er Pomata said:
Great job!!
Diamond needs this kind of rom.
But, i have a problem with camera! It doesn't work!!!
What can i do for fix it?
Please... i don't want back at original rom (onlyone rom, v.2.03 based, with TF3D isn't it?)!!!
Thanks!
Click to expand...
Click to collapse
i fixed this bug this afternoon...sorry was my mistake this evening i'll upload the fixed version!!!you must reflash....sorry!:-(
Does this have EzInput with Phone Keypad ? What is the version? Does it have EzInput Menu (Editor) ?
Keep the Good work!
What is the Page Pool?
I will try the english version
i remember once trying to create a base ROM for elfin with my stock rom. and i had a tough time fixing a bluetooth bug...
the point is...take your time fixing the bugs...we will try to report whatever bugs we come across...and you can build on them...
and why i like this rom?? becoz i have been searching for local cabs even to install TF3D 2.1 in my diamond. but i know it will take a lot of space and memory if not properly built into the ROM...
so i want this rom to be improved with only stock rom...and pls dont try to include whatever is requested...there are lot of good custom roms even now...
but then again for whatever reason, those roms start getting bloated with user defined apps...
so in my opinion let this be a clean base rom at start...later you can start releasing premium or pro roms like one of the other users in this forum...
thankx...cant wait for the WWE
XorPP said:
Does this have EzInput with Phone Keypad ? What is the version? Does it have EzInput Menu (Editor) ?
Keep the Good work!
What is the Page Pool?
I will try the english version
Click to expand...
Click to collapse
answers are in the first post!!;-)
ayyu3m said:
i remember once trying to create a base ROM for elfin with my stock rom. and i had a tough time fixing a bluetooth bug...
the point is...take your time fixing the bugs...we will try to report whatever bugs we come across...and you can build on them...
and why i like this rom?? becoz i have been searching for local cabs even to install TF3D 2.1 in my diamond. but i know it will take a lot of space and memory if not properly built into the ROM...
so i want this rom to be improved with only stock rom...and pls dont try to include whatever is requested...there are lot of good custom roms even now...
but then again for whatever reason, those roms start getting bloated with user defined apps...
so in my opinion let this be a clean base rom at start...later you can start releasing premium or pro roms like one of the other users in this forum...
thankx...cant wait for the WWE
Click to expand...
Click to collapse
heyy i released the WWE version!!!tnx for the help!!!howewer i want to mantain this profile because diamond doesn't have hardware resources(i think that qualcomm cpu that is mount on diamond is not enough)to handle senseUI...maybe i have a idea....a wm 6.5 with touchflo3d....but wm 6.1 still remains!;-)
Hello. I've downloaded your ROM. Splendid work. I realy like this rom, it's fast, snappy and low on RAM consumtion. All in all a fantastic ROM.
One problem thow. Opera doesn't work. In TF3D internet tab, when i press the Opera link, the "HTC quetly brilliant" logo apears and after a few seconds the phone returns to TF3D as if i hadn't press Opera link.
Extremely fast
Finally the WWE and i flashed it...
and now report time...
- i just love the combination of TF3D 2.1 and a Stock ROM...
- Opera not opening
- TF3D is a bit sluggish...
- Most of all after a reset, it takes quite a while to boot
Don't consider these as minus points..Cos these are things you can improve on.
ABSOLUTELY FANTASTIC ROM!!!
Rom in test
...congratulation for your rom,have a little problem,when telephone ringing in my bag,the telephon in my hand suspend ringin,continuos also vibrating
1. Weather can not update my location - if I add my location as city - it works -so I can not see weather at calendar tab .
2. SMS delay - receive sms when phone is sleep, it doesn't notify .
Flashed rom with mtty.
Hello all!
My cooking skill is too low for building rom based on build 21057 for HTC Trinity. May you (community) help me with this? I want wm 6.1 21057 for my p3600, i'm trying some times to *cook* this, and all times i'm get black screen or non-bootable device. Can anybody make this for me?
Hello destruct0r,
i´ve same problem. I try cooking an another Build but i think it´s same problem.
My steps i choose:
1. Dump last rom in OSKithcen-> RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship
2. import an rollup
3. change some settings (but i think i don´t know the right settings)
4. cook it
5. and flash (but it stops at 0%)
What is wrong? Can anyone help us? pls
Sorry, language isn´t good,but i try!
Hey guys,
I have not been very active on here for a while, but I just noticed your posts. Here is a completely stock OEM Kitchen with 17944 as it's SYS, and then I've imported 21057 into it also. You can open both working versions using the Open Project button. It's using osKitchen Zero.
I have not added any extra packages or modified anything, it's just straight. I also won't have a lot of time to invest in helping, but this should be a good stepping off point to start from.
I'll try to monitor this thread a little bit, but like I said, I cannot give much time at the moment.
I just flashed 21057 to my Trinity, and I have to admit, it runs pretty darn good. It has around 25MB Free Memory and 34.5MB Free Storage. If you use LZX compression when cooking, storage should increase a bit.
DOWNLOAD
You will find the Kitchen (2 Parts) and a fully working 21057 in case you want to try it first. The Kitchen is a self extracting file, Run Part 1, and the ROM is a Self Extracting and easy to flash file. Just put your phone into BootLoader Mode and double click the download, then follow the instructions.
Trinity runs a lot much better with 6.1 roms. I'll give it a try SuperSport.
PapaJasy said:
Trinity runs a lot much better with 6.1 roms. I'll give it a try SuperSport.
Click to expand...
Click to collapse
Good luck, and let me know if you find any errors.
I've tested and it's very fast.
Things that i would remove:
Get started
Windows Update
Zip ?
MIDlet Manager ? (don't know what it is)
Things that i would add:
Fingerkeyboard 2.1 (installed myself)
Google maps
Connection setup
1% battery meter
No bugs found yet.
I'll tell you about the battery performance during the weekend.
What about you folks?
PapaJasy said:
I've tested and it's very fast.
Things that i would remove:
Get started
Windows Update
Zip ?
MIDlet Manager ? (don't know what it is)
Things that i would add:
Fingerkeyboard 2.1 (installed myself)
Google maps
Connection setup
1% battery meter
No bugs found yet.
I'll tell you about the battery performance during the weekend.
What about you folks?
Click to expand...
Click to collapse
Thank you for your input PapaJasy.
ZIP is actually for Zip and Unzip of files.
Midlet is for Java Applets
Those both are part of the Stock ROM, so I left them there.
That ROM I posted was more for proof of concept, and not necessarily one I figure anyone would use full time, although you can. I just wanted to be sure it would flash and run and hopefully be bug free so people could take the Kitchen and work from it. At this point, if anyone likes the basics of the ROM, I've also posted the Kitchen so it can be modified any way the user likes.
Again, thank you for your input.
I've downloaded the kitchen and i don't understand much of it. I'll see some tutorials including yours and make a final rom for me haha.
Damn this is fast!
Thanks!
Thanks so much!!!
Hello @SuperSport,
but how do i import an another Build like 23563 and Lang (0407).
I´ve an 23563 Rollup with any Language, but when i import it i can´t choose an other Lang and i think it´s not right build i chose.
pls help
ZeroII
p.s.: small bug i can´t turn wifi on (old Commgr? i don´t know)
Sorry, language isn´t good,but i try!
Hello @SuperSport,
but how do i import an another Build like 23563 and Lang (0407).
I´ve an 23563 Rollup with any Language, but when i import it i can´t choose an other Lang and i think it´s not right build i chose.
And why does TomTom6 don´t run on your Rom´s and kitchens with right key i don´t understand this.
pls help
ZeroII
p.s.: small bug i can´t turn wifi on (old Commgr? i don´t know)
Sorry, language isn´t good,but i try!
ZeroII said:
Hello @SuperSport,
but how do i import an another Build like 23563 and Lang (0407).
I´ve an 23563 Roll-up with any Language, but when i import it i can´t choose an other Lang and i think it´s not right build i chose.
pls help
ZeroII
p.s.: small bug i can´t turn wifi on (old Commgr? i don´t know)
Sorry, language isn´t good,but i try!
Click to expand...
Click to collapse
Can you send me a download link to the Roll-Up you are trying to import? I will try to create a Video Tutorial showing how to import it.
The Wi-Fi error I am not seeing on my phone. When I turn it on, it immediately asks to hook to my home network. Does it work if you go to Start, Settings, Connections, Wi-Fi, Menu, Turn ON Wi-Fi?
PS: Your language is fine. I understand you very well, much better than some.
Thx @SuperSport for Support,
link: http://www.mediafire.com/?nh4yjbw7na9pkaa (Rollup 23563 multi lang)
I´ve repair by your instruction (insert S/N and Mac in Trin100.nb and use mtty...), how my phone brick´s i don´t know. -> therefore your kitchen work´s good.
thx ZeroII
ZeroII said:
Thx @SuperSport for Support,
link: http://www.mediafire.com/?nh4yjbw7na9pkaa (Rollup 23563 multi lang)
I´ve repair by your instruction (insert S/N and Mac in Trin100.nb and use mtty...), how my phone brick´s i don´t know. -> therefore your kitchen work´s good.
thx ZeroII
Click to expand...
Click to collapse
I am impressed that you did the WiFi fix. It can be a bit difficult, but you did it without asking how. Good Job!
I'm downloading the Roll-Up you linked to now and will get a video shortly. I'll post a link to it here when it's complete.
EDIT: Ok, I ran into the same problem as you did. The Kitchen imported the Roll-Up just fine, but when I tried to build a ROM, it would only show 0409. What I noticed is that in the OEM packages, there is one called 'OEM_Lang_0409'. When I make a copy of this package, but rename it to 'OEM_Lang_0408', it now shows two languages available to cook. The problem is that the package is still 0409, but I only changed the name. I don't know what would happen if it cooked that way, maybe it would be ok, or maybe there would be english mixed all through the ROM? I'll be giving it a try and report back...
Hello Supersport,
I´ve writen my last exam in Informatics (second semester), so I can concentrate one's energy on cooking an Trinity Rom. Have you good new´s for me? Oh, sorry first, thanks for supporting me! I hope you have good news. ;-)
I will test some configs next days.
"mfg" (-> german "mit freundlichen grüßen")
I think it´s in english "best regards", "Sincerely yours,..." or "Yours faithfully,...",
what is right?
mfg ZeroII
ZeroII said:
Hello Supersport,
I´ve writen my last exam in Informatics (second semester), so I can concentrate one's energy on cooking an Trinity Rom. Have you good new´s for me? Oh, sorry first, thanks for supporting me! I hope you have good news. ;-)
I will test some configs next days.
"mfg" (-> german "mit freundlichen grüßen")
I think it´s in english "best regards", "Sincerely yours,..." or "Yours faithfully,...",
what is right?
mfg ZeroII
Click to expand...
Click to collapse
i guess if you write "wbr" for "with best regards" SuperSport will understand
@SuperSport - still cooking??
nosedive said:
i guess if you write "wbr" for "with best regards" SuperSport will understand
@SuperSport - still cooking??
Click to expand...
Click to collapse
I have not cooked in a while. I want to get back to it, but a lot has been happening in my personal life. For the time being, I've been enjoying my Samsung Focus WP7 with Mango. Cooking takes more brain power and time than I have been able to give it lately. I'll be back.