After flashing a ROM, does the phone auto detect network settings ie GRPS and sms centre numbers? sorry if this had already been posted. I did a search but couldn't find anything.
Thanks,
Mark
If yoy use a cook rom it can be disable by the cooker, use the manual way from connection-> connection setup
Related
Hey all. I used IMEI-CHECK to unlock a T-Mobile Dash I bought and now I am encountering some issues. I am using the phone on Cingular’s network. I have a Data package with them and for some reason cannot connect to the web from the phone. Also, when I ActiveSync, my contacts from OUTLOOK do not transfer over. I get an error message. I had a NOKIA E61 and all worked fine. I do not know why I am getting these error messages.
Also, under the COMM manager, the “Direct Push” and “Data Connection” options are grayed out and I cannot set up anything….
Please help. Do I need to rip the phone’s software off and re-install unlocked setting or what? How do I do it?
Thanks….
I don't think your issues are related to unlocking, backup everything and try a hard reset on the device and then try to activesync and setup your email account.
Did you change your settings?
You need to change your settings to work with cingular. Search this forum for the cingular wap/mms settings.
It's always started on my TyTN. I don't know why, but when shutdown AS, after few minutes it's started again. Also problem is that I don't see him in Running programs list ???? I have WM6.
shumar said:
It's always started on my TyTN. I don't know why, but when shutdown AS, after few minutes it's started again. Also problem is that I don't see him in Running programs list ???? I have WM6.
Click to expand...
Click to collapse
go into comm manger and disable direct push
egoist6 said:
go into comm manger and disable direct push
Click to expand...
Click to collapse
Direct Push is disabled.
Problem is that ActiveSync is only started, it's not trying to synchronize. So no Data connection.
Also everything worked perfect, and I think that problem caused installation of FlexiMail, which is uninstalled, but problem stay...
just a try: use schap's advanced config tool and uncheck "connection always on"
another try might be to make sure that AS is really closed (and not minimized). use htc task-manager or x-button change the settings to "close apps" when pressing the x-button.
Unchecked and closed, but showing again.
another try might be:
go to activesync, menu->schedule
and set "peak times" and "off-peak times" to "manually"
already adjust like that and doesn't help.
I seem to have the same issue...seen it with wm6 and now wm6.1
hm.
maybe one of the following might help:
use htweakc and disable "GPRS/G3 Auto Attach"
goto activesync, menu options and delete your exchange server (be sure to backup your data as it deltes all your emails, contacts, etc.)
delete all of your internet/isp connections and your work network connections and re-add them.
if these do not work, please check if there is a 3rd party software which might be configured properly.
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Kavafy said:
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Click to expand...
Click to collapse
Open AtiveSync with phone NOT connected, goto "File" and "remove portable device" (or similar, I've italian version, I don't know exacly string in english).
If there is an old configuration, in this way you'll remove it, then it must start the wizard... (I hope...)
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Kavafy said:
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Click to expand...
Click to collapse
I thought it was a re-install... You can try removing all drivers and ActiveSync and reinstalling all, it seems an istallation problem or a wrong ActiveSync version...
Try to download ActiveSync newly
If you have any kind of firewall software try to disable it...
Then, if activesync works, you have to set up new firewall rules...
Did any of these methods work? did you do something else to make it work??
This is how I got it working.....
go to settings/connections, open USB-PCand untick "the enable advanced network configuration"
if this does not work, and if your trying to sync to an outlook server then in settings/connection, choose connections, chose advanced tab, select networks, then ensure both have chosen the same network ( ie my Work Network). On the chosen network chose edit, and you should see a Proxy Setting tab.. Choose this and ensure the only top box is ticked ( this network connects.....)
worked for me... dunno why?
yeah try xda-boj's one it should work fine
start\settings\connections\usb to pc and uncheck 'enable advanced network functionality'
Thanks for the suggestions. I know I wasn't clear in my earlier posts, so:
- I had Activesync 4.5 installed, and it worked.
- Then file transfer from the PDA to the PC stopped working (the files appeared to transfer, but did not appear on the PC)
- So, I uninstalled Activesync 4.5, downloaded it again, and reinstalled it.
- After the re-install, Activesync would not create a partnership with my PDA running WM6.
- The partnership wizard does not start!
- I don't get any error message; in fact nothing happens, except that the PDA connects as a "guest", so I am able to browse files and install software but not actually sync.
- I have tried: disabling Windows Firewall; disabling Avast! anti-virus; checking that all connection protocols are enabled in the "network connections" control panel; re-installing Activesync again; and finally I got the same error on another PC.
- I haven't yet tried unchecking the "Enable advanced network functionality" box - I'll try that as soon as I get home tonight.
Beyond uninstalling Activesync, is there anything else I should be doing to start with a clean system?
Thanks again,
K
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
I've tried unchecking "Enable advanced network functionality", but that doesn't solve it!
K
lhrt said:
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
Click to expand...
Click to collapse
Where can I find this option?
K
start->settins->USD to PC-> Enable advanced network functionality
Oh, OK. I'd already done that! Keep coming in with suggestions though!
I am new to tweaking my phone, it is a ATT Tilt 2 and I currently have the Energy Rom and Co0kies. My question is that I cannot connect to ATT My MEdia net thru Opera 10. Can anyone give me any pointers on how to configure it to have opera connect to My Media net.
Thanks
Colorado
Check this post, ignore steps 1-4
http://forum.xda-developers.com/showpost.php?p=5870098&postcount=416
Thanks for reply, but no help...
JColorado said:
Thanks for reply, but now help...
Click to expand...
Click to collapse
I think you could have been a tad more vague.
How is it possible that you were able to flash a rom and Hardspl the phone but you are unable to load a cab?
When you replaced the rom all the factory settings for your provider were erased. The cab he pointed to you reinstalls the ATT settings. You will still have to go to the connections box and select what you want your data connection to be.
Ask a proper question and on this site you are likely to get a great and informative response.
Oh, and welcome to XDA.
Well, Sorry if my question seemed vauge, Thanks for the cab file. I was able to install it no w/ no problems. My problem is not that I cannot connect with My MEdia net for internet connection, but I am trying to access the the ATT Stock My MEdia net personal Home page using Opera or any Browser.
Any help would be appreciated...
you have to enable the proxy to view medianet sites
go to this thread and download the proxy manager cab, once installed, just open up the enable proxy and you'll be good to go.
Thanks, Will install and check it out thanks...
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
JColorado said:
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
Click to expand...
Click to collapse
The ATT Proxy cabs are for internet explorer. For Opera you need to modify the opera config. To do this point the Opera browser to "opera:config"
Once there, go to the Proxy settings and enable these:
Enable HTTP 1.1 for proxy
HTTP server=wireless.cingular.com
HTTPS server=wireless.cingular.com
Use HTTP
Use HTTPS
Use Proxy On Local Names Check
Save the settings. This will get you access to http://device.home
Unfortunately, Celluar Video will not work as it checks the User Agent, and Opera 10 is not supported through the ATT Proxies. You can try setting a custom User Agent in "opera:config" and set it to something like:
"HTC-ST7377/2.07.401.1 (80303) WWE Opera/9.70 (Windows NT 5.1; U; en)"
I have no clue if this will work though.
-e
IDK
Thank you for your help, I am still having difficulties...
It basicly timed out trying to connect to the site, so I tried a basic site i.e. google and it still was timing out? I will try again, with the help of one of my co-workers who is more tech savy using the TP2 aswell but is w/ verizon
i just installed a new cooked ROM and lost all my internet settings. i tried reconfiguring it, but it would not connect. could somebody please help me by providing me with the settings?
im using o2 UK pay as you go.
thanks
Did you try the Connection Setup wizard?
Start - Settings - Connections - Connection Setup