Unlocked T-Mobile Dash Issues...HELP!!! - Upgrading, Modifying and Unlocking

Hey all. I used IMEI-CHECK to unlock a T-Mobile Dash I bought and now I am encountering some issues. I am using the phone on Cingular’s network. I have a Data package with them and for some reason cannot connect to the web from the phone. Also, when I ActiveSync, my contacts from OUTLOOK do not transfer over. I get an error message. I had a NOKIA E61 and all worked fine. I do not know why I am getting these error messages.
Also, under the COMM manager, the “Direct Push” and “Data Connection” options are grayed out and I cannot set up anything….
Please help. Do I need to rip the phone’s software off and re-install unlocked setting or what? How do I do it?
Thanks….

I don't think your issues are related to unlocking, backup everything and try a hard reset on the device and then try to activesync and setup your email account.

Did you change your settings?
You need to change your settings to work with cingular. Search this forum for the cingular wap/mms settings.

Related

MDA Pro -> Jasjar ROM Upgrade : T-Mobile UK Settings Help

Hi all -
First of all, this isn't a "Help - a ROM upgrade killed my baby" post.
All (seems) to be working just fine, and I'm getting email pushed to me very happily (hurrah).
I do, however, have a question about the connections settings, which I'm hoping other UK users can help me with.
I've set up the gprs/umts connection to use access point "general.t-mobile.uk" as my device previously had. I've set the username / password to user /pass, as I found out doing a quick search.
My problem is, though, that whilst the (U) symbol is shown, my connection rate is ridiculously slow (like treacle).
Are there any other settings I should be reviewing? Is that username/password correct?
Thanks for any suggestions
BT
Okay - having rebooted the phone, I'm unable to make a data connection at all. Is this a known problem? Is there an issue with this radio stack (1.0.9) on T-Mobile?
the i-mate rom have wrong settings for t-mobile UK in MMS and data.
You need to set them up manually.
Best way to do it is read the manual on t-mobile site.. it has a step by step guide.
I did that and it worked..
the settings you might have found using google search on 3rd party sites don't work, I tried that already
battletank said:
Okay - having rebooted the phone, I'm unable to make a data connection at all. Is this a known problem? Is there an issue with this radio stack (1.0.9) on T-Mobile?
Click to expand...
Click to collapse
Password is incorrect for the UK.
User: user
Password: wap

activesync and 6.1

Hey all, ever sinced i flashed 6.1 to my phone, I cant connect to active sync. I have been flashing thru boot loader with no problems, but I need to get activesync woking again. Can anyone help? I have hard splv7 and and using CRC ver7. I have deleted and downloaded activesync and checked all connection settings on the pc and phone, no joy. thanks for any info.
Never mind, I figured it out. on phone Settings/Connections/USB-to-PC uncheck (or check) "Enable advanced network functionality" I had to uncheck the box.

802.1x Settings: Smart Card or Certificate?

I just installed the latest WM6.1 rom by Kavana. I'm trying to connect to my private/work network, and I need to use EAP type "Smart Card or Certificate", but only PEAP and TLS are listed. Are there any solutions to this issue? I searched on this forum, but could only find the same question asked (but not answered) here:
http://forum.xda-developers.com/showthread.php?p=2028467&highlight=Smartcard#post2028467
Thanks!
Sorry for the lack of details but I had a similar problem. There are several google references to various ways to get certificates working. You can also disable certificate checking which is what I elected to do for now.
To force WM5 or WM6 to accept the PEAP server's certificate without attempting any other validation, add the following registry key:
[\HKLM\Comm\EAP\Extension\25\]
"ValidateServerCert"=dword:00000000
This worked for me. More good hacks and the full article/blog http://www.mobilewave.ro/forum/topic-2549.html
Can you link to those several references on google? Why is the smartcard or certificate option missing from this rom anyway? Are there any registry hacks to get this option back?
Hey man, do your home work and google and you can always change the registry entry if you think that the network your are connecting too is not trustworthy. Otherwise I think you will spend many hours of trial and error like I did.
I tried
"ValidateServerCert"=dword:00000000
I am still not able to connect to network. Also as said above, the TLS is not showing the certificates & smartcard. Also when I click on TLS "properties" nothing shows up. I have certificates installed, I can see it from Settings->Security->Certificates.
Any help. It is getting very frustrating.
Bump. Please chime in.

Froyo and exchange

I've searched everywhere but cannot find a solution that works.
I've just got a HTC Desire but cannot get ActiveSync to work. No one other has a Desire with froyo so I cannot get any help here. (they do got iPhones or window phones, which all can sync)
I use the exact same settings as they do, however whatever I do I get "authentication failed", and I know that I user correct domain/user/pass.
I tried owa through the browser and that worked fine. I checked the certificate and that was valid. Any ideas?
We run exchange 2003
go check the exchange original certificate's host name.
This was the problem with my setup.
On 2.1 it didn't care, on 2.2 the domain(host name) must be identical to the actual certificate of the exchange.
yoxler said:
I've searched everywhere but cannot find a solution that works.
I've just got a HTC Desire but cannot get ActiveSync to work. No one other has a Desire with froyo so I cannot get any help here. (they do got iPhones or window phones, which all can sync)
I use the exact same settings as they do, however whatever I do I get "authentication failed", and I know that I user correct domain/user/pass.
I tried owa through the browser and that worked fine. I checked the certificate and that was valid. Any ideas?
We run exchange 2003
Click to expand...
Click to collapse
I'm going to assume you are running Froyo - as most exchange servers require remote wipe and unless your device meets the minimum security requirements it will not work.
Have you installed the certificate? (This may not be necessary as ActiveSync pulls the policies from the server)
Settings > Security > Install from SD Card
Froyo supports ".cer" certificates so you should not have a problem here.
Here is the main thing, in security you need to make sure you do the following:
Change screen lock - make sure you set a PIN password (MUST BE PIN!) If you have pattern password enabled you will not connect.
Lock phone after - this should be set to "Immediately"
After over a week of trying to get it working on my Desire changing to PIN password is what I had to do. Let me know if this works for you.
Failing this download the demo version of TouchDown from the android market and try to connect using the "Automatic" method - if it fails it should give you more details on what the actual problem is or you can always email NitroDesk who make the app for help.
Thanks will try!
tried and it did not help. I'll check with the retards managing our echange. My colleague tried with his user/pass and it worked straight away. there's something wrong with my user i guess.
There is a bug with certain configurations of Exchange 2003 where IIS will throw an error when you log in, if your password is set to expire within 14 days.
Try to log in with outlook web access and see you get "HTTP 401 Unauthorised".
If you do, and press F5 and see if it lets you in. If this happens then you just need to change your password and it should start working on your Desire.
Thanks for your answer st0kes, but it did not help. I can access OWA without any problem. I have tried to set a new password but that did not help either.

Exchange issue

Hi,
I have a question about exchange setup. Is a data plan with enterprise mandatory? or can we use it over wifi?
I am trying to setup my corporate exchange. I installed cerificates from email (after lot of searching) and initially it gave certificate error and i went my ie in laptop and pulled all certificates and installed. Now it just says 'there is a problem with the setup error code 85010004'. Please help.
I searched and could not find any more help anywhere.
Thanks & Regards,
Murty.
Maybe this is too simple, but you do need to reboot the phone after installing the certificates; have you tried that?
I have set up exchange activesync over wifi, and it works fine without a cellular plan.
Thanks for confirming for WiFi.i checked with exchange admin and they said I don't have access. I raised request and fingers crossed for now.

Categories

Resources