Hi guys, i have a question. how come after i installed wm6 on my htc 8525, my phone is very slow whenever i open any files or folders. Hope u guys can help me. thank you
Did you do a hard reset after you flashed?
How do i reset it? Also, with wm6 , it's really hard to use activesync, sometimes it work but sometimes it's not.
shadowluan said:
How do i reset it? Also, with wm6 , it's really hard to use activesync, sometimes it work but sometimes it's not.
Click to expand...
Click to collapse
Press both buttons above the green call and red hangup key poke your stylus to the reset hole. all together, and you will get a screen. look at the wiki please.
Or simply go to start>settings>system>clear storage>1234>ok.
Thank you you guys !
Related
my Cosmo doesn't response, just stop at the green screen "Windows Mobile".
How to make a hard reset? Or other tricks?
thank you.
come on, just check your manual
brahms2000 said:
my Cosmo doesn't response, just stop at the green screen "Windows Mobile".
How to make a hard reset? Or other tricks?
thank you.
Click to expand...
Click to collapse
HOLD BOTH SOFTKEYS AND POWER UP.
ID64 said:
HOLD BOTH SOFTKEYS AND POWER UP.
Click to expand...
Click to collapse
Thank you.
the trick is timing. cannot hold the keys too long. i have to release the power key in 2-3 s.
Sorry but I do not figure it out. I have checked the manual but did not find anything. I have tried pushing both of the softkeys (the ones under the display, right?) and then the power button, for 1sec, 2secs, 3secs, but nothing worked. So how does it work?
Another point is the ClearVue suit. It won't install ?! Wrong device or something? Where can I chek for a new ROM? The one from the forum did not work an o² has not listed anything yet.
Greetings
I had trouble with similar issues and someone suggested that I should just update the firmware on my handset. Took me a while to locate it but i found they had updated firmware on the 'downloads' tab at http://www.timtechs.com/unlocked-o2-cosmo-prd150.html Is this a good idea or unnecessary? Im not sure, haven't tried it yet.
Thanks in advance,
I'm using the TNT 2.0 rom for hy hermes......I've been using the rom for a while with no prob. Today, I had to do a soft reset...my hermes stockes at the WM6 home screen page and does not want to acces windows.....What should I do....
Thank you fo the help.
i'm using spl2.10
sounds like you might have to do a 'hard reset'.
this will reset your ppc back to the base TNT rom you installed, so you'll have to reload everything you've put on since.
to perform a hard reset, hold down both left and right soft keys at the same time and stick the stylus into the hole in the bottom (where you'd do a soft reset) all at the same time.
to help you find out which program might be causing you problems, it's a good idea to load them one at a time and soft reset after each install.
good luck!
it should be a 3rd party caused this, what did you install??
Thanks for the help,
I did a hard reset....by holding the green and the red ( on / of ) phone and the soft reset....nothing, I did not load any 3rd party software....
it loads the 1st TNT screen where we see the arabic words...then it turn to the WM6 welcome screen and it stays there.....does not want to load window.....
Thanks for the assistance
PS. it happend when I did a soft reset this morning.....I'm using TNT form almost 3 weeks now.
its right said:
it should be a 3rd party caused this, what did you install??
Click to expand...
Click to collapse
I've seen the same thing on my Hermes, nothing installed. After 5 or 6 reboots, it hangs and that is the ball game.
I'm sorry I cannot offer any more information than that
is this means that my Tytn is gone. ! ! !
Can't I bypass the WM6 welcome screen and enter a ' safe mode' so I can
re-flash it?
Thanks for your assistance
PS. It's true, I just remembered that 2 weeks ago, I installed Skype as a thrid party
just do a hard reset and you'll be fine
lcohen999 said:
just do a hard reset and you'll be fine
Click to expand...
Click to collapse
could you pls tell me how to do a real Hard reset....Thanks
I did pressed on the left and right (phone) button + stylus.....but still same result...I'm stock at the welcome screen
yassou said:
could you pls tell me how to do a real Hard reset....Thanks
I did pressed on the left and right (phone) button + stylus.....but still same result...I'm stock at the welcome screen
Click to expand...
Click to collapse
we thought you know how, please go to wiki and you will learn every thing.
It's back.....THANK YOU
Thanks guys,
I was pushing the bad buttons......I hard rested and it's all good....
Many thanks
Hey, so I bought a 8525 cingular(at&t) yesturday. The guy sold it to me cheap because he said when he upgraded it to the vp3... somethin which is WM6 the touch screen didnt work anymore. But he was able to get passed the, "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE-BASED DEVICE" screen in the beginning. I was wondering if anyone would know how to get the tap screen up and running again. I flashed the whole ROM, I upgraded the radio, & installed WM black Satin. But its stuck at that tap the screen ****, and my tap screen still doesnt work.. Anyone have any solutions? Maybe Downgrade to WM5 would work? anything I could try would be great.
Respond ASAP if you guys can, this is my only phone, and need it to make calls. Thanks
twobad4u87 said:
Hey, so I bought a 8525 cingular(at&t) yesturday. The guy sold it to me cheap because he said when he upgraded it to the vp3... somethin which is WM6 the touch screen didnt work anymore. But he was able to get passed the, "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE-BASED DEVICE" screen in the beginning. I was wondering if anyone would know how to get the tap screen up and running again. I flashed the whole ROM, I upgraded the radio, & installed WM black Satin. But its stuck at that tap the screen ****, and my tap screen still doesnt work.. Anyone have any solutions? Maybe Downgrade to WM5 would work? anything I could try would be great.
Respond ASAP if you guys can, this is my only phone, and need it to make calls. Thanks
Click to expand...
Click to collapse
If a reflash of rom doen't help then I'm guessing you need to send it in for service. Don't think any other software will do any good at all.
temp solution at least
put a blank file called "welcome.not" in the root of your storage card. In this way the whole thing gets passed by when you hard reset or flash new ROM.
you may later try to align screen using buttons or I can make you a cab for that.
cheers,
dan
Hey Dan1967 I would appreciate it if you could make me a cab for the alignment. I had tried that without the cab file, but your right, I doesnt work without a mod. Also, where exactly would I drop the welcome.not filel for this all to work?
twobad4u87 said:
Hey Dan1967 I would appreciate it if you could make me a cab for the alignment. I had tried that without the cab file, but your right, I doesnt work without a mod. Also, where exactly would I drop the welcome.not filel for this all to work?
Click to expand...
Click to collapse
it is written in my message where to put the file...
do that and if you can not realign by buttons than your touch is indeed useless, but the device may still used with some reduced functionality
Try this link. Im 100% sure you can bypass the screen alignment.
http://216.139.221.18/downloads/mobi...eAlignment.zip
oops i posted a wrong link.
Try this one instead.
http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
where is my storage device located. R u referring to my microSD chip?
does anyone here think it could possibly be the touch.dll.. maybe when the dude upgraded to WM6 the touch.dll file got corrupted. Any info on this could help. And if someone does thinks this happened. How would I go about reinstalling the touch.dll
thanks for the link .. i was stuck with having my iPaq hard reset & my touchscreen not working .. this helped..
twobad4u87 said:
Hey, so I bought a imate ultimate 8150 yesturday. somethin which is touch screen didnt work anymore. But he was able to get passed the, "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE-BASED DEVICE" screen in the beginning. I was wondering if anyone would know how to get the tap screen up and running again. and my tap screen still doesnt work.. Anyone have any solutions? anything I could try would be great.
Respond ASAP if you guys can, this is my only phone, and need it to make calls. Thanks
Click to expand...
Click to collapse
please send me your reply soon my email id is [email protected]
My touch screen goes white
Hi there, does anyone know why my screen on my tytn goes all white sometimes - i have to put it in and out of sleep to get it going again?
when ever I press the Green call button on the phone, it hard resets.
does anyone has a solution for this?
forgot to mention that the phone is a qtek 9090 with windows 2003 se.
solution: Don't Press the Green Button.
Sorry, couldn't resist. Probably need to Hard Reset the phone only the correct way.
zcink said:
solution: Don't Press the Green Button.
Click to expand...
Click to collapse
nice one mate.
zcink said:
Sorry, couldn't resist. Probably need to Hard Reset the phone only the correct way.
Click to expand...
Click to collapse
and how can i do that? sorry, i am new on this kind of phones.
Not familiar with that phone but try doing a search on here or the manufacurers site. Do you have the owners manual?
zcink said:
Not familiar with that phone but try doing a search on here or the manufacurers site. Do you have the owners manual?
Click to expand...
Click to collapse
i will do that. thanx. i am sure xda developers will have the answer. somewhere.
I did a quick Metacrawler Search and came up with this:
How to hard reset the Qtek 9090
NOTE – Hard resetting your PDA will return it to a factory default state and all user
information will be erased.
1. Press and hold the power button
2. Using the stylus, press the reset switch (whilst still holding the power button) and
release it
3. Release the power button
The PDA will now undergo a hard reset.
thanx mate. i did hard reset it but still does the same thing. might be a hardware problem?
Yeah well figured it was worth a try. Makes no sense that its doing that. You should be able to upgrade the ROM to WM5 if you can find one for that phone. You'd really have to do some searching.
Hey I bet it's hardware problem.
If you upgrade to wm5, it won't hard reset.
But you will have to fix the clock/date settings every time you hit the green button.
noone85 said:
Hey I bet it's hardware problem.
If you upgrade to wm5, it won't hard reset.
But you will have to fix the clock/date settings every time you hit the green button.
Click to expand...
Click to collapse
How can be so sure?
Hi bros.
I need a Big help here please!!><
My Samsung i900, i cant go into the Window.
Anyone know the way to "Key hard reset" please?
the problem is i used SPB backup, after back up phone book and pim and then auto reset.
After reset, only shows Windows mobile 6.1 screen but on the screen is white and only shows the today-top clock but cant go into setting page(so i cant use the hard reset icon><)
Please help...just got the i900 for 2 days but that SPB backup pissed me off><
Anyone know what is the way to Key hard reset please?
Thanks!!!
# sorry my english is very poor, if my message is hard to understand , i'm apologetic here.Thanks!!
can't help you
I'm sorry, but I can't help you.
Where did you buy the i900? That's the most perfect phone around. What country?
Thanks,
Wieger van der Wielen
Hi.
i'm form HK, i bought it form Singapore 2 days ago, hehe.
its 16Gb, around $6050HKD(still much cheaper then HK[water goods] price$8500hkd^3^)
press Call and Hang up button and hold it then tap the soft reset button. It should pop up reformat menu right away after you release the soft reset button. Make sure you don't press both Call and Hang up buttons to hard, because if you press too hard the middle button will be pressed.
hotwingz00 said:
Hi bros.
I need a Big help here please!!><
My Samsung i900, i cant go into the Window.
Anyone know the way to "Key hard reset" please?
the problem is i used SPB backup, after back up phone book and pim and then auto reset.
After reset, only shows Windows mobile 6.1 screen but on the screen is white and only shows the today-top clock but cant go into setting page(so i cant use the hard reset icon><)
Please help...just got the i900 for 2 days but that SPB backup pissed me off><
Anyone know what is the way to Key hard reset please?
Thanks!!!
# sorry my english is very poor, if my message is hard to understand , i'm apologetic here.Thanks!!
Click to expand...
Click to collapse
on top of the device, there is a soft reset button, use a think stylus click on it, dont click too hard. it will reset.
hope this helps.
geee .. i'm lost .. please ..
I installed HTC home final and now when i start Omnia it hangs and all i can see is call on left, menu on right and upper icons at the top .. i can't touch anything, i cannot tap anything ..
In my phone there is 250 contacts !!!??? OMG
Anycoll i908e
This is my first post here so thanks for your patience.
I purchased a phone from a friend that says Anycoll on the front not Anycall when I took out the battery it says i908 but the book he gave me says i900 and this phone looks alot like the Omnia i900 but as far as software it doesn't even have winows mobile on it.
1. Has anyone heard of this phone
2. How can I hard reset set this phone
3. Can I upgrade this phone with a different ROM
I preciate any help or info on this phone. Oh it is Chinese but simplified English. Thanks Moe