Hey, so I bought a 8525 cingular(at&t) yesturday. The guy sold it to me cheap because he said when he upgraded it to the vp3... somethin which is WM6 the touch screen didnt work anymore. But he was able to get passed the, "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE-BASED DEVICE" screen in the beginning. I was wondering if anyone would know how to get the tap screen up and running again. I flashed the whole ROM, I upgraded the radio, & installed WM black Satin. But its stuck at that tap the screen ****, and my tap screen still doesnt work.. Anyone have any solutions? Maybe Downgrade to WM5 would work? anything I could try would be great.
Respond ASAP if you guys can, this is my only phone, and need it to make calls. Thanks
twobad4u87 said:
Hey, so I bought a 8525 cingular(at&t) yesturday. The guy sold it to me cheap because he said when he upgraded it to the vp3... somethin which is WM6 the touch screen didnt work anymore. But he was able to get passed the, "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE-BASED DEVICE" screen in the beginning. I was wondering if anyone would know how to get the tap screen up and running again. I flashed the whole ROM, I upgraded the radio, & installed WM black Satin. But its stuck at that tap the screen ****, and my tap screen still doesnt work.. Anyone have any solutions? Maybe Downgrade to WM5 would work? anything I could try would be great.
Respond ASAP if you guys can, this is my only phone, and need it to make calls. Thanks
Click to expand...
Click to collapse
If a reflash of rom doen't help then I'm guessing you need to send it in for service. Don't think any other software will do any good at all.
temp solution at least
put a blank file called "welcome.not" in the root of your storage card. In this way the whole thing gets passed by when you hard reset or flash new ROM.
you may later try to align screen using buttons or I can make you a cab for that.
cheers,
dan
Hey Dan1967 I would appreciate it if you could make me a cab for the alignment. I had tried that without the cab file, but your right, I doesnt work without a mod. Also, where exactly would I drop the welcome.not filel for this all to work?
twobad4u87 said:
Hey Dan1967 I would appreciate it if you could make me a cab for the alignment. I had tried that without the cab file, but your right, I doesnt work without a mod. Also, where exactly would I drop the welcome.not filel for this all to work?
Click to expand...
Click to collapse
it is written in my message where to put the file...
do that and if you can not realign by buttons than your touch is indeed useless, but the device may still used with some reduced functionality
Try this link. Im 100% sure you can bypass the screen alignment.
http://216.139.221.18/downloads/mobi...eAlignment.zip
oops i posted a wrong link.
Try this one instead.
http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
where is my storage device located. R u referring to my microSD chip?
does anyone here think it could possibly be the touch.dll.. maybe when the dude upgraded to WM6 the touch.dll file got corrupted. Any info on this could help. And if someone does thinks this happened. How would I go about reinstalling the touch.dll
thanks for the link .. i was stuck with having my iPaq hard reset & my touchscreen not working .. this helped..
twobad4u87 said:
Hey, so I bought a imate ultimate 8150 yesturday. somethin which is touch screen didnt work anymore. But he was able to get passed the, "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE-BASED DEVICE" screen in the beginning. I was wondering if anyone would know how to get the tap screen up and running again. and my tap screen still doesnt work.. Anyone have any solutions? anything I could try would be great.
Respond ASAP if you guys can, this is my only phone, and need it to make calls. Thanks
Click to expand...
Click to collapse
please send me your reply soon my email id is [email protected]
My touch screen goes white
Hi there, does anyone know why my screen on my tytn goes all white sometimes - i have to put it in and out of sleep to get it going again?
Related
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
attot1239 said:
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
Click to expand...
Click to collapse
Remove the battery for 5 minutes and re-insert it back..see if it will fix it or not.
attot1239 said:
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
Click to expand...
Click to collapse
what bootloader version are you running?
Many thanks trashcan for your quick response. I have removed the battery for 5 minutes, the screen was still showing that last image. I keept the battery out for 15 minutes untill the screen was totally off. Reruting the battery resolved the ****ing issue, thanks again.
Also thanks to walshieau, the device has IPL-1.01 and SPL-1.40.Olipro.
Regards.
Regards.
The bad part of the news is that the white screen is still comming!!!
Any clue?
Regards.
I thought of sharing this with you
I have just done the follwoing:
> Updated (again) the device with SSPL-1.40
> Re-flashed the device Force through SSPL the new OS (LVSW)
The phone looks better, however I got the white screen two times in about five minutes.
Wat else I should do? Please share your experience.
Regards.
attot1239 said:
I have just done the follwoing:
> Updated (again) the device with SSPL-1.40
> Re-flashed the device Force through SSPL the new OS (LVSW)
The phone looks better, however I got the white screen two times in about five minutes.
Wat else I should do? Please share your experience.
Regards.
Click to expand...
Click to collapse
Read?
1) Ensure that you have 1.40.Oli by checking the bootloader screen.
2) Run the upgrade, but, select AUTO DETECT! DO NOT CLICK FORCE SSPL!
3) White screen gone
LegolasTheElf said:
Read?
1) Ensure that you have 1.40.Oli by checking the bootloader screen.
2) Run the upgrade, but, select AUTO DETECT! DO NOT CLICK FORCE SSPL!
3) White screen gone
Click to expand...
Click to collapse
not quite, the ROM image affects some devices, I'll redo Black 2.0 like I redid LVSW if this keeps happening.
It is getting worse now ... I do not know what is happening
Good morning,
Thanks LegoLasTheElf and Olipro for you input, I started to patch the device again and although everything was normal, the update program sayed the connecting was lost and took me to a recovery screens which just went into a loop (repeating the same steps with no hope).
The device is on the bootloader (tri-color) screen. I tried getting into it using the mtty and set 14 0 (as I found it on on of the posts) however it did not help.
Could someone tell me please to to get the device to boot normal again.
Regards.
attot1239 said:
Good morning,
Thanks LegoLasTheElf and Olipro for you input, I started to patch the device again and although everything was normal, the update program sayed the connecting was lost and took me to a recovery screens which just went into a loop (repeating the same steps with no hope).
The device is on the bootloader (tri-color) screen. I tried getting into it using the mtty and set 14 0 (as I found it on on of the posts) however it did not help.
Could someone tell me please to to get the device to boot normal again.
Regards.
Click to expand...
Click to collapse
yeah... flash my patched LVSW with CustomRUU
Olipro said:
yeah... flash my patched LVSW with CustomRUU
Click to expand...
Click to collapse
Yeah, that works!! That is how I solved my whitescreen.
thx Olipro!!
Many thanks Olipro for your continued help.
I have gove through your topic on the white screen and I posted you a reply there. The megaupload site is blocked in my area, if possible please mirror it on another site, i.e. 4shared.com
Regards.
I have exactly the same White Screen symptoms and more recently, the 1 mm screen shift problem too. I removed my battery for 15 mins and the screen shift temporarily went away but on the next reset, it is back :-(
I have SPL-1.40 Olipro but am unable to download the LVSW to resolve White Screen as Megaupload never works in my area. Can someone post that ROM to Rapidshare please.
Thanks a ton!
Olipro said:
yeah... flash my patched LVSW with CustomRUU
Click to expand...
Click to collapse
Where can I get the CustomRUU? The device is now on the BL screen and the tools are being able to communicate with it.
Regards.
Alright, I have the same problem here. Now before anybody comes on here and tell me to read this and that, I've tried everything.
From going back to 1.01MFG, mtty the OS, use 1.40, use customRUU, leaving the battery out for 5mins, 15mins, hours, over night. Even tried going back to the original ROM and still nothing, the same damn white screen. As far as I am concerned, the intervals are actually getting worse and it comes on more often.
Anybody has any other ideas beside the ones that are posted everywhere. Trust me I've been trying to fix this for over a week now and I have read everything on here.
Any help is appreciated. Thanks guys
YES This was my first solution
http://forum.xda-developers.com/showthread.php?t=298520
bcrx7 said:
Alright, I have the same problem here. Now before anybody comes on here and tell me to read this and that, I've tried everything.
From going back to 1.01MFG, mtty the OS, use 1.40, use customRUU, leaving the battery out for 5mins, 15mins, hours, over night. Even tried going back to the original ROM and still nothing, the same damn white screen. As far as I am concerned, the intervals are actually getting worse and it comes on more often.
Anybody has any other ideas beside the ones that are posted everywhere. Trust me I've been trying to fix this for over a week now and I have read everything on here.
Any help is appreciated. Thanks guys
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298520
@BCRX7- After the WHITNESS from LVSW and then black1.2 I used this QTEK rom. It got rid of the white screen. Then I used Olipro's modified ROM. I am now running BLACK2.0 with no problems. Props OLIPRO and JasJammin!!!
i solved my white screen in a different and strange way, but easy
you may not believe it, but i did it, i solved the problem of my white screen in a very simple way.
i put my hermes in the fridge for 20 mins at 2C and i keep it on and put it over night.
(no charging, no sync, .... nothing)
this is the way how i solve it.
try it at your home, and tell me what happened to it.
thanks for all.
Hardware or software issue?
Hi,
Did anyone figured if white screen is hardware or software related issue? I wonder if there is anybody that doesn't got any whitescreen since they upgraded to WM6. I observed that the number and the severity of the white screens was different depending of the cooked ROM used (I have Olipro 2.10 SPL, Radio 1.50). Unfortunately I didn't count the white screen number for each version in order to choose the right one
I want to be sure I have tried all software methods before I will send my Hermes to the mobile operator for a replacement (if it is a hardware issue). Thanks in advance for any suggestion!
Hi all.. I had the same prob and it developed into this: http://forum.xda-developers.com/showthread.php?t=303872
So its a HW problem... You can get it back to normal by hitting(yeah not the nicest thing to do with a toy that has high price tag) the phone when its turned off completely -if its hibernating it doesnt work. If you have warranty time left -get it fixed. If not -you can try opening the hermie and doing whats told on 8th page in thread I mentioned. I got mine fixed by changing the front keyboard circuit board..
At this point I can;t even use the phone. it started earlier today after upgrading to Windows Mobile 6 Pro Black Edition 2.0 from windows mobile 5 and it would usually haoppen when i was talkin on the phone while recieving a text message, after which the screen would turn white and Id have to take the battery out for a quick second. Now even the battery doesn't do the trick so basically I can't even use my phone since my looking a blank white screen
any ideas whats going on?
Could you please give us some more information, setup your signature to show your rom version (and name), radio version, spl etc...
What EXACTLY have you flashed to your phone recently (or at all)?
okay I tried to get a signiture but I dont know if it worked so here it is
Cingular 8525
IPL-1.01
SPL-1.40.0lipro
HERM 100
Windows Mobile 6 Pro Black Edition 2
CE OS 5.1.195 (Build 17740.2.3.0)
ROM version: Pro Black 2.0 (1/04/07)
Protocol: 32.71.7020.12H
Now I plugged the phone into my pc usb port and it turned on again without any problems.
Few other things
I upgraded my vista drivers to the ones pointed on this site
The Hard-SPL-V6 utility never seemed to work as it would always give me error but everything else was installed without a problem and since I already have SPL-1.40.0lipro I guess theres no point in using that utility, from what i understand...
So you havent tried upgrading to ANY other rom at all?
I want to give the Windows Mobile 6 3DES.2 a try next but I don't know if I'm doing smething wrong here.
Aside from that, I havent really installed any apps
jarnism said:
I want to give the Windows Mobile 6 3DES.2 a try next but I don't know if I'm doing smething wrong here.
Aside from that, I havent really installed any apps
Click to expand...
Click to collapse
OK I doubt that it is the ROM that has caused any issues here, i would like you to CONFIRM that your bootloader version is 1.40.olipro before you continue doing naything else.
mrvanx said:
OK I doubt that it is the ROM that has caused any issues here, i would like you to CONFIRM that your bootloader version is 1.40.olipro before you continue doing naything else.
Click to expand...
Click to collapse
I just checked and that's wht it says, its been there ever since I installed windows mobile pro black edition 2
I check by pressing the power and ok button and resetting the little buttun with a stylus.
OK, have a go at flashing a different WM6 ROM, try 3DES?!
Well at least he does his reading. Welcome.
Hmm...The infamous white screen. I was a victim of that for a day, tho 1.40Oli should have fixed that...Hmm try reflashing the ROM?
Also...with 1.30Oli or later, I was able to flash with Vista without doing the driver replacement using RUUWrapper.
The way you make it sound, it seems like you have "temporary white screens"
I don't think it would hurt to reflash...and tell us your results ^_^
I'm not that educated in anything advanced yet but I am curious now.
well right now the screen goes white everytime pwer goes off and i press the power button. I can have the phone turned on all the time which draines the battery or power off the screen and reset it everytime i need to use the phone... Anything similar to that happen to anyone?
this only happens whenever the phone is unplugged from the power for some reason. As soon as its connected to the ac adapter or usb, the screen turns on and off withot a prob
i make hard reset to my fhone,then i can't align my screen,i align my screen many times.nothing happen.
i have the same problem
so,what hapen to you fhone now? my fhone still under waranty,and i send to fmg service centre and they said maybe touch panel problem,did you fix you fhone ready?
Screen Align problem
Me too having the same problem after hard reset
I think its a problem with the latest wm6.1 roms.
Align must be a bit "off" to work...although I havent found a pattern yet...
Download PHM RegEdit, install and create/modify this registry key:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="501,489 781,231 778,770 232,759 232,225"
These should work quite OK
sent back samsung is touch panel hardware problem so change a new touch panel... Thanks, it can not go in to windows at all so cant edit registry
garytanyh said:
sent back samsung is touch panel hardware problem so change a new touch panel... Thanks, it can not go in to windows at all so cant edit registry
Click to expand...
Click to collapse
I could have cooked a version that applies the necessary calibration data via provxml.. but alas it's too late now
FAIROS_IPS said:
i make hard reset to my fhone,then i can't align my screen,i align my screen many times.nothing happen.
Click to expand...
Click to collapse
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!
its nothing happend to me au22ru.. anyone can help plz....
Thousand Thanks, I can skip this part and back to normal.
au22ru said:
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!
Click to expand...
Click to collapse
Thousand Thanks, I can skip this part and back to normal.
keep stic on points shown like addsign. not by hands
You guys walking around one main problem.
Touchsreen of your phone appears to be broken, when allign test is not passed its becames by fault of touchscreen. Doesnt matter what firmware do you use. Its just warrancy repair, if you have it. Mostly is replacing of touchscreen.
Donst listen to advises to pass this test is hardware fault.
Cheerz
hi, "welcome.not" worked for my samsung sgh-i780 very good.
I could start my phone without any alignment, but i'm sure, that in near future i will need to change touch screen.
BR
szysiek83
au22ru said:
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!
Click to expand...
Click to collapse
Thanks for this tip. Now I can use my phone till the touchscreen is replaced/repaired.
Yeap "welcome.not" worked for me. i connect the device with windows device center since i am using windows 7 . then i naviagte to the root folder of the phone and put a blank welcome.not file and reboot it starts with out asking the align screen and now my phone is working fine. no need of the touch since i have a full qwerty key and a senser mouse. thank you so much.
No way, it must work. It shouln't have 2 extensions 4 example : welcome.not.txt or similar. It should be just WELCOME.NOT.
@au22ru
It's not necessary to copying to root AND root of sd, it could be one root, but i preffer to have this file on sd, because after flash root of internal memory is deleted.
@yonylove
check the attachment. Unzip and copy to your sd.
heineken78 said:
You guys walking around one main problem.
Touchsreen of your phone appears to be broken, when allign test is not passed its becames by fault of touchscreen. Doesnt matter what firmware do you use. Its just warrancy repair, if you have it. Mostly is replacing of touchscreen.
Donst listen to advises to pass this test is hardware fault.
Cheerz
Click to expand...
Click to collapse
hi heineken,
This thread started 2 years ago, but is still relevant for people like me..
My i780 also have TS problem.. at first, it started small only. Align Screen takes about 5x before it aligns, works for awhile, then misalign again. Then I Align again, maybe takes 10x now, work for a while, then not work again. I even re-Flashed ROM.
Now, I try to align it I must have tried tapping crosshairs 100x already, wont get aligned. And I cant quit the Alignment screen so I take out the battery to power off then on again.
From what I understand,
#1.. TS is now broken, Hardware (Screen) problem? no other fix, as you say above?
#2.. This "Welcome.not" solution at first gave me hope.. I thought there is simple fix, until I understand it now.. I think now if I REFLASH Rom, the phone will first ask you to Align Screen and since i cant, Ill be stuck there forever, right? Even if I take out the battery?
Therefore as long as my TS is broken, I SHOULD NOT REFLASH or I will be stuck? Am I right? And if I do get stuck then the solution is "Welcome.Not". (At least there's a way out) Did I get it?
I can still use mouse and keyboard, but Im not happy because I have lots of apps that use TS. Like GPS software when Im driving, as well as many games. It even makes swiping or reading sms hard with defective TS.
Fortinately, I think I may have a solution for me.
I still have that old bricked i780 (dead) somewhere. I bought a replacement and this one Im using now has the defective TS. (Maybe because I buy it 2nd hand.. although it was working fine the first few months)
QUESTION: Can I take the dead i780 to a celphone technician and ask him to replace the TS panel on my current one? That should work, yes? Problem is many celphone technicians are not familiar with the i780 model, but they work with a lot of Touchscreen phones. This should be easy for them to do and it should work, yes? (unless it is a chip issue or something more technical)
The reason Im asking for advice is I want to be careful now who I allow to open up my phone and mess with it. I suspect the last time maybe my 1st phone could still be revived properly but I showed it to many technicians maybe along the way someone permanently killed it.
Thanks for any advice!
I need to install stock Hard SPL but my screen doesn't work. I need to press OK in order to install stock SPL on the screen but TP2 is missing tab and arrows won't work as well. Any ideas? Thanks in advance.
You don't need to click OK instal SPL, its automatic, all you do it from is your computer.
Kenchi* said:
You don't need to click OK instal SPL, its automatic, all you do it from is your computer.
Click to expand...
Click to collapse
I wish it were. It's asking me if it is ok to install unsigned application........ Any ideas what can be done?
Fix your screen? A touch screen phone is going to be pretty useless without a working touch screen.
enahs_ said:
Fix your screen? A touch screen phone is going to be pretty useless without a working touch screen.
Click to expand...
Click to collapse
That is why I'm asking how to install stock hard spl to bypass confirmation for warranty reason.
Why not connect it to your PC and use one of the many PC apps that can control the TP2? I use Soti Pocket Controller but there are many others and some are free. Good luck.
I wonder if you can just do a reset? Push the button inside the battery cover.
kimtyson said:
Why not connect it to your PC and use one of the many PC apps that can control the TP2? I use Soti Pocket Controller but there are many others and some are free. Good luck.
I wonder if you can just do a reset? Push the button inside the battery cover.
Click to expand...
Click to collapse
I thought about the same idea in the first place but as you know in order to install any kind of application on TP2 you must click the same damn OK, and without touch screen or tab on the keyboard is a problem.
Almazick said:
I thought about the same idea in the first place but as you know in order to install any kind of application on TP2 you must click the same damn OK, and without touch screen or tab on the keyboard is a problem.
Click to expand...
Click to collapse
How about MyMobiler? As far as I remember, you only need to install it on the pc and in connects via AS or WMDC. Could be wrong but worth a try. HERE
matmaneyre said:
How about MyMobiler? As far as I remember, you only need to install it on the pc and in connects via AS or WMDC. Could be wrong but worth a try. HERE
Click to expand...
Click to collapse
The same problem as above It keeps asking to press OK in order to install remote application
sliding your phone open and using the arrows + enter doesn't work?
burtonsnow8 said:
sliding your phone open and using the arrows + enter doesn't work?
Click to expand...
Click to collapse
Nope, just the same as you can't click on Start menu using keyboard arrows.
your keyboard doesn't have an "Ok" button?
if it makes you feel better i've warranty exchanged 3 devices which were hard spl'd, only flashed stock rom and returned it. Was never billed for the devices.
actually, one of the devices the screen went white and couldn't do anything so i exchanged it with a custom rom and hardspl. all the devices were on At&t.
also isn't there a way to install the stock spl from bootloader where u don't need to use the touch screen? not sure but i vaguely remember doing this on a the original tilt.
best of luck.
Enter button acts as ok or action button is some applications. Have you try that?
A few hours ago i was browsing the xda portal when i found a thread about someone booting win 95 on his HTC Himalaya.... so i found it a little bit interesting so i want to try it out myself..... just few minutes later i googled some info and find out that need to increase my screen resolution by nyditot virtual display software....then i just download the trial version of it and try it on my BA.....however, my device wont pass the tricolor bootscreen(first one that is) and it just freeze there.....so i tried to remove the battery and luckily my device boot normally afterwards...dammit that app...so i go to settings and remove that sh**ty app..after that, i power off my device and put it into the cradle to charge it..my ba lights up as it detect the charging...but i just saw a white screen instead of a display...it shocked me and the first thing that i do was to soft reset it...however, after soft reset,i tried to power off and power on my phone..then the same as before a white screen,,,i also tried setting the screen to blank by using core player options... the screen didn't went blank as if it was powered off...but it seems that i can still see the display like just the backlight is turned out...however touching the screen wont do anyting....i need help asap as i need to use my device to finish my assignments...well the only possible solution that i'm seeing right now is just a hard reset...but i dont want that..recently just got everything working on my BA(wi-fi, mms, psx games,etc that i dont want to lose)help me , please.....
hfzarx said:
A few hours ago i was browsing the xda portal when i found a thread about someone booting win 95 on his HTC Himalaya.... so i found it a little bit interesting so i want to try it out myself..... just few minutes later i googled some info and find out that need to increase my screen resolution by nyditot virtual display software....then i just download the trial version of it and try it on my BA.....however, my device wont pass the tricolor bootscreen(first one that is) and it just freeze there.....so i tried to remove the battery and luckily my device boot normally afterwards...dammit that app...so i go to settings and remove that sh**ty app..after that, i power off my device and put it into the cradle to charge it..my ba lights up as it detect the charging...but i just saw a white screen instead of a display...it shocked me and the first thing that i do was to soft reset it...however, after soft reset,i tried to power off and power on my phone..then the same as before a white screen,,,i also tried setting the screen to blank by using core player options... the screen didn't went blank as if it was powered off...but it seems that i can still see the display like just the backlight is turned out...however touching the screen wont do anyting....i need help asap as i need to use my device to finish my assignments...well the only possible solution that i'm seeing right now is just a hard reset...but i dont want that..recently just got everything working on my BA(wi-fi, mms, psx games,etc that i dont want to lose)help me , please.....
Click to expand...
Click to collapse
Well, uninstalling nydiots might have messed some drivers up. Sorry to tell you this, but I think that your only option will be hard reset. BTW, I edited your post a bit... watch the language we have kids around the site, you know?
yeah, sorry bout that....i was really upset that time....but now i've found a solution....luckily i dont need to do a hard reset...i reinstall the application again(nothing much to lose...)and realised that in the application folder there was a shortcut named "vd restore"(what else should that mean...)used that and viola, everything was back to normal...then, later, i downloaded nyditot vd the latest version and it worked....just that it was too slow maybe because of the scaling...and titanium wont work...maybe it need it's own cpr....so i want to request anyone here who have it, vga titanium .cpr file please post it for me....will continue to explore what i can do with this application...and btw, thanks mr.egzthunder1 for replying....
Glad everything worked out