I started this thread for my dumbass because I didn't want to clutter up all the other threads that were trying to give real information.
I've even bothered a few of the more knowledgeable people on the forum but I'm sure they have better things to do than explain something they've probably explained a bizzilion times...
Okay, here's what I've got.
My Diamond has 1.37 ROM on it... the last one available directly from HTC.
I've read so freakin' much on here, my head is spinning. My understanding is with each new cooked ROM, you need an spl.
I downloaded two copies of ROM's. One is 1.93 from HTC Europe. I thought if this was a factory ROM, I wouldn't need to install an spl because it would be built in. I get an incompatible message.
I then d/l'd Dutty's new 1.93 cooked ROM. (version 1.3)
Before I tried to install it, I d/l'd 1.24 SPL.
This is where I get fcuked up apparently. Here's what I did....
-I made a folder on the desktop.
-I downloaded 1.24 and extracted the files to the folder I just made.
-I connected my phone and established communication.
-I doubleclicked on "diamond-sspl.bat" file so it would install the spl new spl
-A windows ms-prompt box comes up and you space-bar down through the prompts.
-On the Diamond's screen, a "continue" dialog box comes up. When I click on it, the screen goes black. (phone shuts off)
I disconnect the USB cable, pull the battery and start the phone up.
I guess this is where I'm lost... doesn't this mean I'm ready to install the new ROM? If I hold the volume button down and reboot the phone, it shows version 1.37 spl.
Like I said, I didn't want to clutter up useful threads, for newbies such as myself, it seems the more you read, the more complicated it becomes (when in reality it isn't)
Can someone please clue me in to my stupidity. I know you all answered these questions before but I am literally SICK of reading. I spent 3 hours last night and 7 hours today messing with this. I really do have a life but this phone has me messed up.
Just for the record, I tried the other spl (1.23 and 1.34, etc, etc) to no avail.
Help?
Thanks so much,
Mark
orangecrush said:
-On the Diamond's screen, a "continue" dialog box comes up. When I click on it, the screen goes black. (phone shuts off)
I disconnect the USB cable, pull the battery and start the phone up.
Click to expand...
Click to collapse
The black screen doesn't mean the phone shuts off, don't disconnect it and let the process continue.
pof said:
The black screen doesn't mean the phone shuts off, don't disconnect it and let the process continue.
Click to expand...
Click to collapse
You're kidding me right?
I'll try it again.... if that's the case, I'm SO embarassed.
Thanks,
Mark
Okay, the "black screen" has been on since I responded to your post. The lights on the phone are off, am I missing something?
I don't think the phone is doing anything, I think it's off.
Mark
orangecrush said:
Okay, the "black screen" has been on since I responded to your post. The lights on the phone are off, am I missing something?
I don't think the phone is doing anything, I think it's off.
Mark
Click to expand...
Click to collapse
How are dfar are you with the hardspl flashing, can u soft reset and connect to activesync, if yes just re-do the process, black screen like what pof said its a part of the process, just run the ruu application and beging flashing thehardspl,
Anyone else?
When I click on continue on the screen, am I doing something wrong?
Thanks,
Mark
When you have the black screen, start the RUU and flash HardSPL... that's it.
duttythroy said:
How are dfar are you with the hardspl flashing, can u soft reset and connect to activesync, if yes just re-do the process, black screen like what pof said its a part of the process, just run the ruu application and beging flashing thehardspl,
Click to expand...
Click to collapse
When the screen turns black (which has been off for about 5 minutes now), I can do a soft reset.
Okay, so now I go into the folder I created on my desktop and doubleclick on what? The RUU 1.000.00.00 file or the your 1.3 version upgrade?
In either case, when I do, the tri-color screen comes on for a second and the screen goes to gray with a progress bar sitting on 0%.
(FWIW, when the tricolor bar comes up, it shows 1.37 as the spl) I thought the whole reason I double clicked on the .bat file was to install the 1.24 spl.
?
Thanks,
Mark
pof said:
When you have the black screen, start the RUU and flash HardSPL... that's it.
Click to expand...
Click to collapse
After doing a soft reset, correct?
Cause if so, read above post.
Thanks,
Mark
I did the RUU install with the screen black and it shows it was successful. I'm SO embarassed.
Okay, so all I've done at this point is install 1.24 spl. Now I can install 1.93, correct?
Geesh, what a moron.
Mark
orangecrush said:
I did the RUU install with the screen black and it shows it was successful. I'm SO embarassed.
Okay, so all I've done at this point is install 1.24 spl. Now I can install 1.93, correct?
Geesh, what a moron.
Mark
Click to expand...
Click to collapse
yes i f u instal hardspl just test it if it shows in bootloader mode,
hold down volume and insert stylus in reset hole and check if all is good then u an start flashing roms now
I can't thank you guys enough. I'm honestly terribly embarassed that I kept trying to do a soft reset after running the .bat file.
I just wanted to say THANKS for everyone's patience for us with limited knowledge. I'm sure I'll have more questions later...lol.
Thanks again,
Mark
orangecrush said:
I did the RUU install with the screen black and it shows it was successful. I'm SO embarassed.
Okay, so all I've done at this point is install 1.24 spl. Now I can install 1.93, correct?
Geesh, what a moron.
Mark
Click to expand...
Click to collapse
Yes, go for it. Connect via activesync and run the DiamondRUU you extracted from the 1.93 download, the rest is automatic.
Related
Sorry to open a new thread, but I want to ask is there any method to fix this problem apart from using Mitty?
I tried flashing LVSW 3-26 firmware using SPL 1.06 or the 1.1x, both gave me the end results of white screen.
I am newbie to Mitty and worry of bricking my device with Mitty.
Can anyone suggest what I could do to cast the white screen away?
Desperately in need of help.
Thanks
I see by the sorry for a new thread you have read
http://forum.xda-developers.com/showthread.php?t=299644
I am with you. Right now I would go to a different version. The previous LSVW or another build. I am trying the mtty thing but I am running vista and cannot get NBHextract to work.
If you do not want to risk it maybe holding off a day and checking back for an update. These guys are fast. Also like I said go to a different version. I flashed the revious LSVW os only and it worked 3 times in a row perfect
When you say white screen what do you mean?? You get a white screen and the device doesnt boot?? or the device has a white today screen?
people
for black 1.3 i will release two versions
one with SPL and OS (with RUU 3.6)
and
one with only OS using standard RUU (assuming you already have HardSPL)
this will give u an option
jasjamming said:
people
for black 1.3 i will release two versions
one with SPL and OS (with RUU 3.6)
and
one with only OS using standard RUU (assuming you already have HardSPL)
this will give u an option
Click to expand...
Click to collapse
Hell yes. Makes the guide clearer to make (i will mention the value of embedded HardSPL and radio though )
mrvanx said:
When you say white screen what do you mean?? You get a white screen and the device doesnt boot?? or the device has a white today screen?
Click to expand...
Click to collapse
The White Screen for me is i can see the HTC Flash screen, but the Windows Mobile screen becomes white without me even seeing it and the Today screen is also white also.
Also, i was wondering if using Hard-SPL might help?
Thanks
nope i am using hard spl and tried it still white screen
Me too....
I also got the white screen of death. lol.
i used the version that was posed on the main page. After the update and initial boot the white screen comes on.
I was able to bypass this after several resets. Then it will start the customisation process. After which it will restart and go to a white today screen with no icons. I do have the task bars at top and bottom but no dialer.
My fix. I went and dl RUU_HER_6.20.100.0_0.00.00.00_XDA_WWE_XBOW_Custom. I installed it and works like it did before.
I will wait till there is a fix for this...
BTW I have a cingular 8525
I WANT TO OFER YOU GUYS SOMTHING
those of you who got white screen do you have language on boot?
i mean do you have diffrent language pack that need to be boot when you make hard reset?
cause i notice that when my language pack boot with new rom igot
white screen the language pack stuck it
then i remove my language pack from booting then its ok!!
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
HKFreak said:
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
Click to expand...
Click to collapse
Think this should help, I did cut the quote down a bit.
mxlaser said:
After hours and sleepless night, and so many flashes i think the NAND in my dopod was hot enough to fry a breaky for me, i've come to the comclusion, i have 100%, no issue success with all ROMS, using 1.01MFG and MTTY flashing each part seperatly. Not one time has a white screen appeared, with ANY rom, and i've tested all the current WM6 roms.
I d/l'd and tried the latest LVSW rom (26/3) and have exactly the same issue when using the packaged RUU to install it. However, when i use MTTY, its perfect every time.
I would suggest the following steps
1. Load into the bootloader mode (HOLD POWER/OK buttons and press soft reset)
2. Flash SPL-1.01MFG onto your device (Read wiki info and file links here)
3. Once flashed, reboot and do step one again to get back into boot mode. You should now see your boot as 1.01MFG
4. Use NBHextract to extract 06_OS.nb file from RUU_signed.nbh file found in downloaded rom package.
5. Load up MTTY, follow steps in the wiki for the 1.01MFG on how to flash OS.nb (OS.nb is the 06_OS.nb file renamed to make it easier)
6. Once flash is complete, the latest rom is installed and you won't have a white screen
7. Now flash Hard SPL v4 onto your devic for safety reasons.
And this fix is EASY to do, 100% works every time.
Click to expand...
Click to collapse
It worked 100% for me first time.
Just for the record I used ROMbaker to get the 06_os.nb then just rename it to os.nb.
Also if you are not sure and feel nervous about bricking it, then just wait for a proper fix.
Finally I got the white screen a few times and everytime I flashed the previous LSVW os only the device worked perfect. From my reading Olipro may have found the problem haveing to do with bad blocks. Nothing major but I believe they are working on it currently.
If you follow these directions and install 1.01MFG, you can BRICK YOUR DEVICE with ANY mistake!
We're not talking about a brick that can be fixed either. You precious phone will become a paper-weight forever more! Really.
I DON'T CARE WHAT THE N00BS ON HERE SAY; FLASHING 1.01MFG IS **NOT** A RECOMMENDED WAY TO FIX THIS PROBLEM! DO NOT INSTALL 1.01MFG UNLESS YOU ARE OK WITH THE CHANCE THAT YOUR PHONE WILL BE BROKEN FOREVER!!
bubu23 said:
I WANT TO OFER YOU GUYS SOMTHING
those of you who got white screen do you have language on boot?
i mean do you have diffrent language pack that need to be boot when you make hard reset?
cause i notice that when my language pack boot with new rom igot
white screen the language pack stuck it
then i remove my language pack from booting then its ok!!
Click to expand...
Click to collapse
No, I have never installed any language packs on my phone. I use good ol' english.
HKFreak said:
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
Click to expand...
Click to collapse
Just go back to a previous version of WM6.
It only takes several minutes to put back XDA- Live.
mzahiri said:
Just go back to a previous version of WM6.
It only takes several minutes to put back XDA- Live.
Click to expand...
Click to collapse
I tried going back to WM5 firmware.
Flashing the firmware is a success but I still got the white-screen-of-death.
Any other options?
Thanks
SPL-1.35.Olipro will be released shortly; this should address the issue of the whitescreen error, all those having problems under 1.30 should no longer encounter it if they were able to flash fine with old SPL's
Olipro said:
SPL-1.35.Olipro will be released shortly; this should address the issue of the whitescreen error, all those having problems under 1.30 should no longer encounter it if they were able to flash fine with old SPL's
Click to expand...
Click to collapse
Go Oli Go!
Question ?
Hi All,
Sorry N00b alert at this .. but very IT literate
Just a quick question off the cuff, what was the last(est) version (can you provide a link) that i can flash to now .. (not mucking around seperating stuff etc) that wont give me the white screen issue.
I am currently sitting on LSVW 25/3 1.38.10 radio and 1.13oli
Thanx test
I was in the middle of upgrading my version of WM6 and i got unplugged and now it wont resume and the phone is stuck at the loading screen that says "HTC" mobile.htc.com
what the heck do i do? it wont budge.. it wont sync with active sync, it wont resume.. i'm flipping out.
did you try get your phone in the tri color bootloader screen and then running the Hard SPL program again?
god, I'm gonna admit, I have no idea what any of that stuff is. I know the tricolor screen, I dont know what an SPL is.. a friend of mine usually sends me the upgrades for my programs and i just follow his instructions, but as i was loading the new version it got unplugged and when i tried to follow the restore options it wouldnt restore the upgrade.. so I've learned the term is bricking.
Activesync won't reconnect the phone.. it tries, then doesnt recognize the device.. so even if i try to downgrade to 1.04, it wont work because it wont sync with the damn computer.. I hard reset, i soft reset, i got it to the tricolor screen, i tried all the stuff in the hermes upgrade problems thread, but i dont know wtf i'm doing. the file mtty.exe wont work.. it just freezes at whatever screen i happen to get it to, be it the tricolor or the HTC screen.
please, someone help me out.. I apologize in advance for not being as savvy as everyone else, but I need some advice here.
Go the tri colour screen
press both soft buttons (the ones that interact with the screen) and insert the stylus and reset.
from here you can make an hard reset. Whenever my phone hangs (or whatever) I use this way BUT i use the cancel button (X) and the phone simply restarts fine
Did u hard SPL your device?
Costanza said:
press both soft buttons (the ones that interact with the screen) and insert the stylus and reset.
from here you can make an hard reset. Whenever my phone hangs (or whatever) I use this way BUT i use the cancel button (X) and the phone simply restarts fine
Click to expand...
Click to collapse
I hard reset, I soft reset, it freezes either way. The only way the computer recognizes the phone is when I get the tricolor screen but active sync wont connect to FINISH loading the upgrade.
antonlim1999 said:
Did u hard SPL your device?
Click to expand...
Click to collapse
I cant because it wont connect to activesync to install anything else.. i cant dongrade, upgrade, nothing! i cant get to version 1.04 from the 1.06 im running because activesync wont recognize my phone.
I think antonlim1999 mean, did you hard-spl before you even upgrade to wm06 or not ?
sg10 said:
I think antonlim1999 mean, did you hard-spl before you even upgrade to wm06 or not ?
Click to expand...
Click to collapse
I already had wm6, i was just getting a better version that didnt have as many bugs.. I began loading it, it got to 45%, then the cat knocked the cable out and it got messed up.. I dont believe it was hard-spl beforehand.. im gonna go with no.
Could you try to SPL in the tri colour mode (as you have contact between the unit and the PC)?
Link below has all (almost) info
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
A warning to those with an aversion to reading
This is a warning to those who don't really know what they're doing. Upgrading a ROM on a WinMo device is something that should only be done when you know what you're doing.
Hope your device can upgrade well, but please, take the time to actually read the wiki and forum before upgrading again, for your own wallets sake.
hiddenconcepts said:
I was in the middle of upgrading my version of WM6 and i got unplugged and now it wont resume and the phone is stuck at the loading screen that says "HTC" mobile.htc.com
what the heck do i do? it wont budge.. it wont sync with active sync, it wont resume.. i'm flipping out.
Click to expand...
Click to collapse
You are not even in the right forum, you'll get better help elsewhere.
Start reading here: http://forum.xda-developers.com/showthread.php?t=286755
Hard SPL thread: http://forum.xda-developers.com/showthread.php?t=296722
philjohn said:
This is a warning to those who don't really know what they're doing. Upgrading a ROM on a WinMo device is something that should only be done when you know what you're doing.
Hope your device can upgrade well, but please, take the time to actually read the wiki and forum before upgrading again, for your own wallets sake.
Click to expand...
Click to collapse
thanks, but I've upgraded before to other versions without a problem and I know that pulling the plug out is a bad idea.. the cat jumped up and ripped it out causing it to brick.
What all the smart arses on this site should be telling you is that you don't need activesync to run the upgrade - it will work just fine from the tri-colour screen.
First off, when you get your phone into the tri-colour screen, check the SPL version - if it isn't 2.10 olipro, the first thing you need to do is read the vanx guide's (link in my sig) and get hard SPL 2.10 olipro on there ASAP - this will prevent you from bricking your phone.
If it is already 2.10 olipro, then breathe a sigh of relief as everthing is OK - just put it into the tri-colour screen and run the upgrade again - it should start again with out a problem.
Cheers,
Smiffy.
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Been there a few times myself.
Do you live in the US? If so, I could call you and walk you through it, or MSN chat, or??? or if you'd rather, let me know and I will try to walk you through it in here.
I am in Europe, time difference is large, appreciate if you give step by step instructions in this forum. Thanks again.
SuperSport,
Hi agin, waiting for ur instructions. I am missing my trinity.
Once agin thanks for ur help
Sorry to hear that...you can have a look here:
http://forum.xda-developers.com/showthread.php?t=299659
and here
http://trinityguides.info/index.php?option=com_frontpage&Itemid=1
hope that can help...
good luck...
jma81113 said:
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Click to expand...
Click to collapse
I apologize jma81113. I was unexpectedly called out of town. My nephew crashed his motorcycle and is in the hospital, so I rushed over there. I'm back now.
Any time I cannot flash another rom, I am forced to flash back to an OEM rom, in my case, I use the one found here: http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
This flashes back the original SPL, Radio, OS, etc... It works best if you can do it from a Windows XP computer. If you don't have that option, there are ways to do it using Vista outlined here.
Then I always flash the Hard SPL found here. In my case, I use Des' Crash Proof. I've had the most success flashing Cooked ROMS with this one.
From there, Flashing Cooked ROMS should work just fine. If you run into trouble, you might have to flash back to the OEM ROM again. Occasionally, I have to. I keep a copy on hand at all times.
Oops! Actually, as I read back through your message, I see that you might be getting just a BLACK screen? Is this correct? And I assume by you saying you tried to get the SPL that you mean you pushed the 'power' 'camera' and 'reset' buttons and nothing? If that's the case, let me know and I'll do some more research.
Just so I know, do you get the orange LED lighting up when you plug in the USB cable showing it's charging?
SuperSport
I am sorry to hear about your nephew accident, I hope he is well and wish him well.
Yes I got a BLACK screen when I press the 'power' 'camera' and 'reset' buttons. The device is completely dead.
When i connect the device to the laptop, red LED lights up for 10 seconds and then disappears, I even changed the battery but no sucess.
Hard Reset?
Oops! Sorry, just re-read your first post. Looks like you tried this already...
The Black Screen is new to me, so I'm shooting in the dark.
You many have already done this, but, have you tried a HARD reset? Press the 'Calendar' 'Contacts' and then 'Reset' buttons all together. Hopefully this will bring up a screen that asks if you want to do a reset. Press the Green Send key and it will reset. Let me know if that works or not...
Buttons shown in attached image:
I have done it already no luck, it seems I am going to send it to the dealer in Malaysia. Thanks any way Supersport for your time and effort. Once again hope your nephew is will.
Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!
esset said:
Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!
Click to expand...
Click to collapse
Here's the Tutorial and here's the Troubleshooter. They're both stickies. Please search and read before posting.
Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.
esset said:
Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.
Click to expand...
Click to collapse
Did you let your device sync with Activesync/Windows Mobile Device Center?
Try recreating the sync pairing.
Try uninstalling the device from PC's Device Manager and reinstalling it and then try recreating the sync partnership.
Try another USB port.
Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either
esset said:
Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either
Click to expand...
Click to collapse
Another USB cable?
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.
esset,
May I ask what branding/model of the Diamond you own?
I own a pure AT&T model just purchased a week or two ago. And, so far I've also had almost zero luck flashing it. I'm moving from an AT&T Tilt which I've flashed so many times, the USB port is starting to wear down. I've also got a lot of experience with many small computing devices with all types of weird programming and flashing routines, so I'm not a newbie. But the AT&T Fuze just seems to be locked in a way that has yet to be covered by the good XDA folks here. Heck, I can't even dump the shipped ROM off the device to send it here for checking out by the developers. All I've been able to do is flash an odd 1.90 HardSPL that seems to have locked the phone even tighter than before. YUCK!
If you're in this same scenario, I'd suggest patience. Eventually someone with enough knowledge of these devices will be able to help out. It is frustrating though, after flashing the other phone so many times with so many different configurations to be held back on the new one.
tnyynt said:
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.
Click to expand...
Click to collapse
You might find this odd. The down-volume + back arrow key combo doesn't seem to work with some of the new versions of the Diamond. I've tried on two of them, and neither respond to this key combo at startup.
Many times entering the bootloader is not a problem though. The routine does cause the phone to go there. And, I can get it there by other means. Just not via the boot up sequence. This tells me there is something very different about these models....
I tried starting and flashing directly from the bootloader (showing USB), and the phone got to show a percentage field (the one when you are flashing) but same here, is constantly at 0% until the flashing utility times out and tells me to reboot my phone and guides me through steps if it has been semi-bricked (bootloader is the volume down + softreset, right?)
I bought my phone in the first shipment to Sweden, it's not locked to any company, bought it without subscription
Else I just flashed it up to latest ROM from htc.com (still no success with HardSPL ) to 2.03.413.2 SVE (02/06/09)
Radio: 1.09.25.23
Version: 52.51.25.26H
ninjaedit: (In the four-colored bootloader thing it says DIAM100 64M SPL-2.03.0000 MicroP-Diam (LED) v11)
Tell me if you need any other info :]
Here's another indication that the new phones are different. I've copied a DIAMIMG.nbh file to both a flash card inside the phone, and to it's internal memory. (sorry, but the thread on that location is confusing on what memory. I assume like most phones of the past that it's supposed to be the flash card, but "internal memory" is not a flash card.) But, the loader screen always responds with "no image file" when it's called up. So, is there a different name expected now?
put manual hardspl into your device, and click to it from your device..
zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.
zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Hi uhm, was that answer aimed for me or to scottwilkins?
If it was for me, is it possible to flash the mobile directly from the memory-card (or internal flash card)? Else if you mean the "manual make-the-screen-black-and-go-to-bootloader" my screen just goes blank, as when you do it with the RUU, and just stops there. Also seems like it looses the connection via USB doing so too. And flashing through the bootloader directly (volume down at softreset) shows the progressbar on the phone, but steadily at 0% (when trying to flash).
search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response
scottwilkins said:
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.
Click to expand...
Click to collapse
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar
okokur said:
search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response
Click to expand...
Click to collapse
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens
zerocool81 said:
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar
Click to expand...
Click to collapse
That program makes the Fuze screen just turn black and do nothing. Cool, huh
Seems that the newer stock ROMS might be blocking something... hmmmm....
Well, crap!
I just figure out where my whole problem is...
The Fuze (my phone) = The Raphael
NOT the Diamond.
I just scrolled down the forum list, saw a phone that looked like mine and went there. DOH!
I feel like a total dumb-ass.
If I'd scrolled just a bit farther down the XDA forum, then I'd seen the Raphael phone.
Holy Cow! Go ahead, say it, I deserve it...
Thanks for all the help otherwise. It was a learning experience for me....
esset said:
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens
Click to expand...
Click to collapse
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html
okokur said:
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html
Click to expand...
Click to collapse
Thanks, but that file takes me into the bootloader, and when I start flashing the percentage is still at 0% until the software times out. Same as before, just the usual "going-into-the-bootloader".
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.