Related
Hi all,
I have an XDA Orbit on O2 which I got last week.
I have TomTom installed on the phone with the maps and voices etc on the MiniSD Card.
I went to use TomTom today, and it showed be the EULA and said No Maps available. I checked the SD Card, and I could access it and launch other applications which are installed on the SD Card.
I soft-reset the device, but still no fix.
Re-installed TomTom, and when it launched after installation it ran fine, however when I shut it down and opened it again i failed and showed No Maps once again.
I read http://forum.xda-developers.com/showthread.php?t=285511&page=1&highlight=Storage+Card thread, and installed the HTC Patch incase this was affecting me, however there is no change.
It seems that I can run TomTom if I re-install everytime I want to use it, however that obviously is no use at all.
Any help would be grately appreachiated, as I'm a little annoyed by this being that I have only had the phone for a week.
have you tried putting the maps on the device storage rather than your SD Card? some applications dont like being split over device and SD.
I have TTN6, and have the maps on the device under 'Program Files/Navigator/Zip/'
Hope this helps.
I had TomTom installed in this way on my XDA Mini S for 18 months with no problems, and as far as I am aware this is the way TomTom is designed to be installed.
Is the name of the TT-map map correct on minisd?
Check spelling.
richard_j_green said:
I had TomTom installed in this way on my XDA Mini S for 18 months with no problems, and as far as I am aware this is the way TomTom is designed to be installed.
Click to expand...
Click to collapse
..same issue
I had the same challenge.
There are one or 2 ways to resolve the issue.
1. Delete the maps, un-install TomTom software, you also need a reedit software to delete all references to TomTom in the regostry. Delete all other TomTom relevant files on the device /Program Files/navigator; /My Document/TomTom. Then soft-reset before installing all over again.
This I did for a friend.
2. In my own case, I reflashed with a new ROM, then installed all over again.
However, my friend had a cracked version, and I told him to go pay for the original, as you only need to pay for the maps these days. I cannot guarrantee 1. will always work.
I am currently using a cracked version also (tut-tut) but am getting the Western Europe edition for christmas from my other half.
The maps folder is named Great_Britain which worked on my Mini S on WM5 no problems.
Can you please advise where the TTN registry keys are, as I looked in HKCU and HKLM but couldn't find anything relating to TomTom. I did not remove all the existing stuff before re-installing so I may try this.
Just to clarify the technical points:
I am running the O2 WM6 ROM that was pre-installed on the device, and am using a SanDisk 2GB MiniSD card.
I don't see your TT version
What is your tt ver?
richard_j_green said:
I am currently using a cracked version also (tut-tut) but am getting the Western Europe edition for christmas from my other half.
The maps folder is named Great_Britain which worked on my Mini S on WM5 no problems.
Can you please advise where the TTN registry keys are, as I looked in HKCU and HKLM but couldn't find anything relating to TomTom. I did not remove all the existing stuff before re-installing so I may try this.
Click to expand...
Click to collapse
Can anyone tell me how I can find out my TTN software version being that I cannot get into the application itself, as I am stuck at the screen showing the No Maps message.
Is the version displayed inside a file or registry key used by TTN?
You have TT6
But was yout tt's version before??
richard_j_green said:
Can anyone tell me how I can find out my TTN software version being that I cannot get into the application itself, as I am stuck at the screen showing the No Maps message.
Is the version displayed inside a file or registry key used by TTN?
Click to expand...
Click to collapse
I'm using the same version now as previously on WM5 - Is that my issue?
I don't have the Mini S with me now, so I can't fire the software up right now, however I will look tonight and post the version, unless someone can tell me a way to find it some other way in the mean time?
Thanks
i dont think u can find the version number, apart from when u are running the program... just had a quick look on mine, and there aren't any files that look useful.
I'm having problems locating the software build version.
I've started TomTom on my Mini S which is working perfectly and loading the maps ok etc etc, however I can't see anything with the build or software number on it - Sorry for being a noob, but could someone point me in the right direction.
Many Thanks
Just open TomTom and press where the signal strength is shown, it will show at the bottom right, at least in version 6.030.
I hope you know that map's from TT5 are not compatible in TT6
richard_j_green said:
I'm having problems locating the software build version.
I've started TomTom on my Mini S which is working perfectly and loading the maps ok etc etc, however I can't see anything with the build or software number on it - Sorry for being a noob, but could someone point me in the right direction.
Many Thanks
Click to expand...
Click to collapse
Hiya mate i used to have this problem too
1. Make sure u dont have bluetooth explorer switched on
2. soft reset your device see if that works
Hi all,
I knew I wasn't being stupid trying to find the version number, so I've taken a picture of the GPS Signal screen - Attached.
I disbled Bluetooth Explorer and this is now working again perfectly, without changing the maps - These maps I have used on WM5 and WM6.
I personally don't see why Bluetooth Explorer would do this, unless TomTom is foolithly trying to look for maps over Bluetooth, but thanks for the help everyone.
to find the version number with TTN6:
-Start TomTom
-Tap on the bottom right of the screen where it shows time/speed/signal strength
-it should bring up a screen which shows your last route, signal on the right and bottom right of the screen the version, which you can tap on and get a detailed view.
Hope this helps.
I also have the same problem, where it says no maps found. It used to work and then all of a sudden it stopped. It is not a cracked version.
Can someone please help me!
Thank You
did you try the soultion in reply 16? it worked for me
Hi,
I am new to all this, can somebody guide me how do I get GPS working with local application on like TOM TOM or anything else on my Sprint Touch.
Thanks,
It all depends... Do you have WM6 or WM6.1 on your Touch? If you have WM6, you will first have to at very least update/change the ROM. There are numerous threads here about that, just try a search for it. If you are already running WM6.1 or a replacement ROM that has the GPS enabled, you most likely need to run an application that understands how to access the GPS to "turn it on" (TomTom does not know how to do this). There is a great tool called AstroGPSLauncher that you can get from this board that can do that for you and will then launch TomTom as well. WM and TomTom will need to be configured to use the GPS also but the settings for TomTom can be different depending on the version of TomTom you have. All of the info for this (and MUCH MUCH more) is available on this board, just look around.
Check the GPS section in my thread Touch Tips & Tricks, link in my sig.
Scruffy said:
It all depends... Do you have WM6 or WM6.1 on your Touch? If you have WM6, you will first have to at very least update/change the ROM. There are numerous threads here about that, just try a search for it. If you are already running WM6.1 or a replacement ROM that has the GPS enabled, you most likely need to run an application that understands how to access the GPS to "turn it on" (TomTom does not know how to do this). There is a great tool called AstroGPSLauncher that you can get from this board that can do that for you and will then launch TomTom as well. WM and TomTom will need to be configured to use the GPS also but the settings for TomTom can be different depending on the version of TomTom you have. All of the info for this (and MUCH MUCH more) is available on this board, just look around.
Click to expand...
Click to collapse
Can you plz. guide more if you can
I have DL TomTom Nav 6.75 and i installed it but when i try run it it's says 'No maps found!'
retesh101 said:
Can you plz. guide more if you can
I have DL TomTom Nav 6.75 and i installed it but when i try run it it's says 'No maps found!'
Click to expand...
Click to collapse
First things first, what version of windows do you have on your device?
goto:
start menu\settings\system\about
and tell us what the first line says under "about".
Mine says "Windows Mobile 6.1 Professional"
studentjunk said:
First things first, what version of windows do you have on your device?
goto:
start menu\settings\system\about
and tell us what the first line says under "about".
Mine says "Windows Mobile 6.1 Professional"
Click to expand...
Click to collapse
I have the same version "Windows Mobile 6.1 Professional"
Hmm. 6 Professional, on a brand-new VZW xv6900. Should I be getting an upgrade from somewhere?
Is it possible to run the 3.42.5 bell ROM and still use the GPS function on Sprint?
I don't have a problem using the internet and making phone calls, but GPS won't lock?
Thanks.
HTC Site
GPS in enabled with the new ROM and the program if configured will work with the GPS.
Sorry, but which program do I need to configure?
I set Live Search on COM4 and it never locks on with the Bell Rom.
Thanks
Configure
mshnayde said:
Sorry, but which program do I need to configure?
I set Live Search on COM4 and it never locks on with the Bell Rom.
Thanks
Click to expand...
Click to collapse
You use the intermediate driver and not any on the com ports, at least that is how I have it working for me.
Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.
I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.
HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!
Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
There's a new Zest firmware available for download from http://www.my-xda.com/. The filename is Xda_Zest Firmware Update_V7.7.0S.WWE20.00_M4.6.5.P7_V2.1.4 GBR20, which seems to be updates to most of the roms inside the zest. It's installing at the moment, and the upgrade interface on the phone is displaying "GalaxyMini5 Eboot (3.33.0). Since this appears to be a codename for the P565, I guess this is more evidence that the XDA Zest is simply an underclocked P565 and more evidence that P565 firmware may well work on it.
Warning, this firmware does not appear to contain the O2 menu software, or the free GPS software that comes with the phone (although maybe the latter can be re-installed from the SD card). Shame - I rather liked the O2 menu interface.
what improvements does it have? Is it actually worth upgrading?
Thanks.
The only things I can see that I don't remember seeing before are a couple of new or updated control panel entries. Video calling is probably the really important one.
You seem to lose the RSS reader, the O2 auto settings, the O2 menu and the GPS s/w (although the latter was only a demo). I have no idea if using the SD card that came with the Zest will restore these, as I don't have it. (If the software is all on there somewhere, and someone could bung me a copy, I'd be really grateful.)
It does make me wonder how the P565 firmware compares. I understand it has a nice touch interface on it.
It seems odd that the new firmware would remove all the o2 specific bits. Great if you want to use it on another network I suppose, but I quite like the mobile shell or o2 menu.
The satnav software isn't on the sd card - only the maps.
The instructions say:
Please note that if you already have CoPilot satellite navigation software on your Xda, refer to the Xda Zest user manual before upgrading your device software.
Click to expand...
Click to collapse
I couldn't see anything of significance in the user manual.
Interesting. I actually have Tomtom for GPS on a different SD card, which is related to the reason I don't have the original SD card. Tomtom autoinstalls from the SD card, so I thought it might be that the O2 software installed itself from the SD card provided by O2. I guess that if it's only maps on the SD card then that's not the case, and the new firmware does strip out all the O2 extras, which seems like a peculiar decision to say the least.
Still, it did get me to try the new SPB mobile shell 3, which is what the O2 menu is based on, but nicer. I'm trying to decide whether it's worth the $35 for just a flashy finger driven interface. The weird thing is, it actually might be.
I'm actually going to upgrade my firmware to new one which is currently available in O2 site. What I want to know is if upgrade mine to the latest what would be the changes I may seen... Is it worth upgrading by loosing all the software?
So far I've seen nothing to write home about. The only reason might be if you can't already make video calls and want to do so. (I never make them, so I have no idea whether or not they're supported in the original firmware.)
I just upgraded mine to new firm ware. It worked fine for me. I didn't lose any O2 extras inc O2 menu. It was Oki but haven't tried yet to make video calls.. I will install iGO8 and will uninstall the co-pilot.
SPB Mobile shell 3.0 Rocks working smoothly with my Omnia and Xda Zest
I've just updated, and I didn't lose any O2 extras either (including Copilot). I backed up the Program Files\Copilot folder on the device to my PC before updating, and copied it back over after the update and voila, I've still got my fully activated version of Copilot. It did still prompt for allowing it to connect to the net during the 14-day trial the first time I ran it, but the license screen confirms it's the full version.
aDe
I have a working theory that the autorun on my Tomtom SD card might have run in preference to some autorun that might otherwise have run the first time the OS booted. I could test this by re-installing the firmware, but it's kind of a pain to have to put all the data on again.
Having played around some more and browsed the Extended ROM on my device, this does appear to be what happened, as all the CAB files are present. Fortunately this is a bonus for me, since I'm not on O2, and most of these files are useless to me, and I can therefore just pick and choose the apps I'd like to install.
This might be useful to other Zest users - the hack to make the Extended ROM visible:
Use your favourite Registry Editor to make HKLM\System\StorageManager\Profiles\ONDisk2\FATFS\MountHidden set to 0 (default is 1)
You can then browse to \ASUS_ROM\ in Total Commander to view your Extended ROM partition. The ROM does not appear to be write protected, so you can now put all the packages *you* want re-installed on a hard reset in there. Neat.
I contacted O2 support about this issue, and they replied saying that:
On occasions the O2 menu can drop off after a ROM upgrade, but this would usually be resolve by either hard resetting or running the upgrade again. The o2 menu is still installed on the new ROM.
Click to expand...
Click to collapse
I have now done this upgrade and have retained the 02 menu. The radio reception seems a bit better as I now get HSDPA at home, which I didn't previously, so the radio upgrade seems to be worth it.
ringer
ive got the zest and am happy with it so far apart from the last 2 days i cannot hear it when i get a call everything else works ie.system sounds,core player etc but the actual phone wont ring it just vibrates ive reset it a million times and checked system settings etc but nothing so if anyone has any ideas i would be very grateful, also how do you know if you are getting hdspa or not is there a setting for it or something, cheers guys.
The connectivity icon at the top right of the screen shows what communication protocol is being used by showing a symbol (usually just a single letter) in a solid square. The letters I have seen so far are:
G - GPRS (2G)
E - EDGE
3G - 3G (this is the odd one out with the two letters squashed together)
H - HSDPA
It's worth mentioning that on my train ride home I see all four protocols at different points, and the hand-off between them is very smooth.
thanks for quick reply i will keep an eye on it, still no joy with my ringer though its very strange. never had a problem like it on my orbit. i will keep investigating ,also do you know if anyone will be coming up with a rom for zest as i miss manila 2d although mobile shell v3 is good.
Have you checked:
Start->Settings->Sounds & Notifications
On the Notifications tab you can select the "Ring type", one possible choice of which is "Vibrate", which will make the phone only vibrate on incoming calls. Just guessing.
yes ive tried all that it might be affected by software ive installed recently i will try unistalling them one by one and see if that helps, failing that il do a hard reset i guess, anyone know how to hard reset the zest? thanks for your help.
There is a contortional key sequence for this, but you can also reset it by going to:
Start->Settings->System Tab->Default Settings
cheers managed to sort it , i installed mini lyrics software and ticked all in associating files which for some reason stopped the phone from ringing
thanks for your help.
Failure of firmware upgrade
Ive just had a power failure whilst upgrading the firmware on my new xda Zest and all it it shows when turning on is "OS Update failed! Please update again". Is there anything i can about this or will it need to be returned to O2. Any suggestions. thanx
Hi,
I've search the forum to find my answer but with no result... Let me explain my problem:
I'm using Christians WM6.5.1 ROM (latest build). Everything works fine except TT7. I've tried several caps but none of them works perfect... The thing is that it won't recognize the build in GPS module. The app says "No GPS device!"
I allready tried to set the settings to "Another NMEA receiver" on the GPS-baudspeed of 57600 and COM:4... But it won't work...
With my TyTnII I didn't experience any problems but I'm pretty desperate to find the solution so I won't need my old Garmin Nav.System any more.
Does someone has an answer to my problem? Or maybe the same problem?
Please help!
hi.
i am also using christian's rom and i am using tomtom 7 without any problem.did you update your gpsfix data?use quick gps and update your data.if you cant get proper signal it will show 'no gps found'.once you pick up the signal it will work properly.
good luck.
Well the main problem is that the gps device that is build in the xperia x1 wil have to find the gps locations..
The first time it will take about 2 to 10 minutes before it finds the locations. After that first time it will take a few seconds to 30 seconds before it finds it's locations..
I had the same problem and it drove me crazy untill I found 2 posts on the internet that saved my life.
Just place your Xperia somewhere on a table in the garden and wait for it to load.
Greetings from Holland.
If I'm not wrong you should use the internal GPS and set the baudrate to 4800. 57600 is way too large.
Okay, I don't use Win 6.5, but also using 6.1 57600 is not working.
Hi,
I've tried your tip but without any results... TomTom tells me that there were no satalites which I was conected to but still got my location pretty pointed...
I drove the entire way on my TomTom but without GPS fix... I downloaded the newest position with QuickGPS before I ran TT7.
Could this be a bug or is it locating me on another way...?
i am using tomtom 7.915.9196.vga_black.cab without any problem.which radio version are you using?seems you are having very weird problem.good luck.
I use TTN_7.916.9189 and there are not problems
got christians rom too and tomtom 7.xx runs better than under windows 6.1 stock rom
Got it working... Don't ask how I did it Cause I really have no clue...!
But I'm really happy it finally works! Now I've got to see how I can get it into my "On The Road" panel to set it as my default navigator
also using christian's latest clean WWE rom.
it does find some satelites in tomtom 7.9xxxxxx, but still not possible to navigate or find a way.
what did you do?
i even let tomtom run till my battery got empty, but no luck?
maybe its the radio, still got the old one i think?
going to update to 7.915.9196.vga_black.cab now, hope that helps
neonlite said:
also using christian's latest clean WWE rom.
it does find some satelites in tomtom 7.9xxxxxx, but still not possible to navigate or find a way.
what did you do?
i even let tomtom run till my battery got empty, but no luck?
maybe its the radio, still got the old one i think?
going to update to 7.915.9196.vga_black.cab now, hope that helps
Click to expand...
Click to collapse
Try radio version 1.16.25.48 and update quickgps