Develop Bugs

O2 XDA Diamond official ROM (German)

Here you are:
http://rapidshare.com/files/127970437/O2_XDA_Diamond_1.37_RUU.rar.html

perfect - thanks a lot for your support.
If you want to make it like the Stock XDA Diamond, first you have to flash spl 1.37 back.
regards
Anja31

Thx!
Yeah, thanks man!

you are my hero (4 2day)!!!

Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!

Thanks, it is nice to have an backup of the Orginal Rom.
Is it possible that you load on Mega?, with Rapid I have problems it said no DL Slot free.
Ghostrider

http://www.megaupload.com/?d=D5HWC22H

I recommend you use mediafire. Rapidshare is only 50Kb/s for non-premium users...

Brevi said:
Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!
Click to expand...
Click to collapse
Yes there is a häuschen alongside the datum and above the uhr. A .cab is difficult since nobody investigated from where the information comes. maybe a system service like on previous models, maybe it's inside manila ...

thanks a lot.
Finally I can try some other roms without losing my guarantee.
A small guide or a link how to undo the HardSPL thing would be nice.
Greetings
iggboert

thanks a lot.
hier ist the guide to downgrade.
if you have unsigned hardspl, you'll need to use the SSPL package (i.e. the same package that is posted in HardSPL thread to flash the hardspl), just replace the NBH file with one of these stock SPLs.
if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that).
also,
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from post #39 in this thread.
2. download the package from post #2 in http://forum.xda-developers.com/showthread.php?t=400950 thread.
3. pick the SPL you want to reflash to (ONLY FOR WARRANTY REASONS), it's a .NBH file, replace the original .NBH in the package from post #2 with this SPL NBH.
4. run the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+5. to verify, volume down + reset, see version number on tricolour screen.

sushilange said:
http://www.megaupload.com/?d=D5HWC22H
Click to expand...
Click to collapse
Thanks a lot

thx for the guide

is there a way to get the blue tf3d theme without reflashing my diamond? a solution like just replacing of the manlia.exe or something?
or can anyone upload me a copy of the manila.exe from the O²-Rom so i can try it myself?
regards
Fabian

Hallo!
I bought a 02 XDA diamond. But it is in German (windows 6.1). I would like to change the language from German to English. Does anyone can help me how to do this.
I have no idea what is ROM and so on. I am completely new to this process. Shall I have step by step instructions please?
Thank you in advance!
Greetings!
Sony

whats the deal-will we be getting a WWE O2 ROM anytime soon? I love the blue tf3d
anyone has any luck with a separate cab created for this ?

can anyone sign this for me to use?

anyone ????

First of all I want to thank the guys posting the "reflash" Instructions again and again, so I finally found them too. Since Im trying out a lot with my Diamond (Not my first WM device, but first with cooked rom) I appreciate it, that it is possible to get back for warranty reasons.
There is just one little thing that I am not sure about yet:
I know:
- instal unsigned Had SPL
- Flash stock Rom (O2 XDA DIAMOND in my case)
- Flash stock SPL (I found he package in the Post mentioned)
I dont know:
- wich of the three versions in that spl-package is the one i need???
I hope so can tell me even though i hopefully never have to try this procedure!
Thanks so far

Hi and thanks for your great work.
My request would be for a stock O2 WWE ROM 1.93 if this is possible?

One question concerning the Oficiall-ROM flash.

Sorry for asking, especially when there is high probably an answer somewhere here already... however I've been searching but couldn't find the information I need...
I have an German o2 Diamond with:
ROM 1.37.207.2 GER
Radio: 1.00.25.03
SPL 1.37.0000 (DIAM300)
And I want to install the latest official HTC english version ROM with radio, suitable for the central Europe region. What would you suggest?
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship?
And my question: is it necessary to install any SPL (HardSPL) primarily in this particular case? (When replacing an oficiall ROM with some other only?)
If yes, what a version of HardSPL should I use then?
Can you help me? Many thanks in advance!
Best regards, Marek.

MarekXXII said:
Sorry for asking, especially when there is high probably an answer somewhere here already... however I've been searching but couldn't find the information I need...
I have an German o2 Diamond with:
ROM 1.37.207.2 GER
Radio: 1.00.25.03
SPL 1.37.0000 (DIAM300)
And I want to install the latest official HTC english version ROM with radio, suitable for the central Europe region. What would you suggest?
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship?
And my question: is it necessary to install any SPL (HardSPL) primarily in this particular case? (When replacing an oficiall ROM with some other only?)
If yes, what a version of HardSPL should I use then?
Can you help me? Many thanks in advance!
Best regards, Marek.
Click to expand...
Click to collapse
ROM choice is OK.
Since you are going from GER to WWE I think HardSPL is needed. You could try first without HardSPL of course.
I would recommend the 1.24mfg, see http://forum.xda-developers.com/showthread.php?t=408621.
If that gives any problems use the one in my signature.

iXiR said:
ROM choice is OK.
Since you are going from GER to WWE I think HardSPL is needed. You could try first without HardSPL of course.
I would recommend the 1.24mfg, see http://forum.xda-developers.com/showthread.php?t=408621.
If that gives any problems use the one in my signature.
Click to expand...
Click to collapse
Is there really no one who has/had the same problem/question?
(It seems to me it's a kind of quite fundamental question!)
Or... is it safe just to 'try' to install another oficiall (e.g. WWE in my case) ROM without any HardSPL?
(I guess I am not a freak but rather a careful user ;-)
May I get also some more info about the SPL versions? Is it necessary/recommended to have e.g. the 'same' version of SPL and ROM?
Thanks for any reply!
Marek

Swedish Diamond Touch to english rom (newbie)

Hi
I have a Diamond Touch with swedish rom installed (upgraded from the HTC homepage)
HTC SVE version 1.93 and its a gsm phone
I know how to update to Hard SPL
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
This is the right HardSPL to use right? (a safe choise = signed)
http://forum.xda-developers.com/attachment.php?attachmentid=93104&d=1213629234
or do i need this file to
http://forum.xda-developers.com/attachment.php?attachmentid=101519&d=1216913773
get a signed HardSPL ?
The ROM stuff is confusing, can i use
HTC WWE CSL__001 12/23/08 2.03.401.2 ? 1.09.25.23 52.51.25.26H 20764 1.4.3 2.03.0000 ?
and what does WWE mean?
I don't like swedish so i want to have english OS, what is the best rom to use am i completly wrong here :-|
any pointers, thanks for helping a newbie ;-D
/J

j3nkl3r said:
Hi
I have a Diamond Touch with swedish rom installed (upgraded from the HTC homepage)
HTC SVE version 1.93 and its a gsm phone
I know how to update to Hard SPL
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
This is the right HardSPL to use right? (a safe choise = signed)
http://forum.xda-developers.com/attachment.php?attachmentid=93104&d=1213629234
or do i need this file to
http://forum.xda-developers.com/attachment.php?attachmentid=101519&d=1216913773
get a signed HardSPL ?
The ROM stuff is confusing, can i use
HTC WWE CSL__001 12/23/08 2.03.401.2 ? 1.09.25.23 52.51.25.26H 20764 1.4.3 2.03.0000 ?
and what does WWE mean?
I don't like swedish so i want to have english OS, what is the best rom to use am i completly wrong here :-|
any pointers, thanks for helping a newbie ;-D
/J
Click to expand...
Click to collapse
WWE means: World Wide English

cyron_at said:
WWE means: World Wide English
Click to expand...
Click to collapse
Thanks for the fast reply
Ahh, ok, if i want english thats the rom i should use right?
Do you know anything about the other questions? is there a better choise like a cooked ROM that have the basic tweeks allready done.
The only thing i want now is a fast windows mobile that has good battery time
I want to use the phone as a sip phone (wm6voip) seams to be the best way to go there

Strange
In this thread they say that
http://forum.xda-developers.com/showthread.php?t=416211
Download OliNex Unsigned Hard-SPL (Developers Edition) from here;
is it not more safe with a signed version?
Is this true?
If i only want to use "Original Shipped ROM Versions" then signed Hard-SPL is the best
if i want to use "Cooked ROM versions" then i should NOT use signed Hard-SPL (due to Brick risk)
is Hard-SPL signed/unsigned used for flashing roms or does it effect signed app code or something in the OS?

Ping
Someone out there that have any more info on this
That have time and energy to explain

First of get the Unsigned Hard-SPL if you want to flash cooked roms (yes OliNex Unsigned Hard-SPL works). Secondly any WWE release will make your phone OS English, you'll even have to add Swedish keyboard layouts and t9 manually (cabs exists).
What rom/radio you want is a subjective preference but I can recommend CT's v. 6.4 HD. And if you don't want a HD rom try CT's original, udK's syrius or duttys newest rom.
As for radios, again it's a matter of preference but personally I didn't like 1.09.25.23 (battery drainage) so I recommend 1.08.25.20 or 1.00.25.05.

ok
Aletheia said:
First of get the Unsigned Hard-SPL if you want to flash cooked roms (yes OliNex Unsigned Hard-SPL works). Secondly any WWE release will make your phone OS English, you'll even have to add Swedish keyboard layouts and t9 manually (cabs exists).
What rom/radio you want is a subjective preference but I can recommend CT's v. 6.4 HD. And if you don't want a HD rom try CT's original, udK's syrius or duttys newest rom.
As for radios, again it's a matter of preference but personally I didn't like 1.09.25.23 (battery drainage) so I recommend 1.08.25.20 or 1.00.25.05.
Click to expand...
Click to collapse
Thanks alot for the info, this is relly helpful, sorry but a few more questions.
1. If i start with a ship orginal rom is "OliNex Unsigned Hard-SPL" a bad idea?
is there any brick risk if i have a Unsigned Hard-SPL and dont update the rom
ie. if i install stuff in the os and such, am i at risk or is the ONLY when flashing stuff with RUU?
2. Is this the keyboard layout that you mean. What is t9?
http://forum.xda-developers.com/showthread.php?t=460872&highlight=swedish+keyboard+layout
Found that t9 = text on 9 keys
3. What is "HD rom" is it for dimond HD only, i have a diamond touch
http://forum.xda-developers.com/showthread.php?t=460832
4. if i take a ship orginal rom, does it overwrite HARD-SPL?
we have 3 comp. here radio, os , bootloader and as i understand if i try to update them one by one then i must have a unsigned HARD-spl
Radio v1.00.25.05 <-- seams to be best but is it safe to use that with the newest orginal rom and is there a special order i should flash it in
HARD-SPL is the only thing iam 100% that it goes first
Radio thread
http://forum.xda-developers.com/showthread.php?t=407956
nice irc channel #xda-devs
http://forum.xda-developers.com/showthread.php?t=400950

1.
I'm not sure I understand that question but if you want to stick with the official htc roms there is no need to mess with SPL. Changing SPL will most likely void your warranty (you can change it back though if the phone isn't totally messed up). Installing software on the phone will not brick it regardless of SPL version, you can always hard reset if you mess anything up.
2.
Yes that's one of them. If you flash your diamond with a WWE rom you will want to install something like that to (more easily) write texts in Swedish.
3.
A HD rom has some of the touch HD's functions (such as stock tab) ported to diamond. So it's not for the touch HD and yes you can use it on your diamond
4.
Original roms that you get from htc's website will not, as far as I know, change your SPL. The radio/rom order doesn't matter though some roms have a specific radio embedded in them and will overwrite your previous radio. Yes you can use v1.00.25.05 with any rom.
So in conclusion change to a unsigned hard-SPL if you want to change radio or flash a unofficial rom. If not, just play around with different tweaks and skins and if you mess anything up your warrenty should cover it.
Peace

Info?
Does someone else have some good to know info taht thay want to share
/J

hi
I am new in this foeld
anybody can help me in changing my swedish HTC diamond to english
(window 6.1)
thanx

help me too
i got the same problem too in izzo cooked 6.5 rom..wanna chage to english from swedish

Upgrade WM5 to WM6 on Arte200 (Artemis?)

Hi, i'm a little bit confused on models of ARTE200 and his association with HTC P3300.
I've a pocket PC Orange branded:
Model: ARTE200
Platform: PocketPC
Windows 5 English
If i don't get wrong this pocket pc is like HTC P3300 branded.
Now i would upgrade my windows to Windows 6 and my dubt is:
can i follow instructions for "WM6.5 ROMs & Kitchens by SHADY313 28005 Release 1" at http://forum.xda-developers.com/showthread.php?t=546805
Other problem is (may be in this case i'm very ignorant) how can i do an hard reset after flashing ? I know soft-reset but hard-reset no.
I've read also "How to install windows mobile 6 for htc p3300(Artemis)?" at http://forum.xda-developers.com/showthread.php?t=601315
Can i apply this also to my pocket PC ?
Thanks in advance and excuse me for my ignorance.
Franco.

Aragorn2004 said:
Hi, i'm a little bit confused on models of ARTE200 and his association with HTC P3300.
I've a pocket PC Orange branded:
Model: ARTE200
Platform: PocketPC
Windows 5 English
If i don't get wrong this pocket pc is like HTC P3300 branded.
Now i would upgrade my windows to Windows 6 and my dubt is:
can i follow instructions for "WM6.5 ROMs & Kitchens by SHADY313 28005 Release 1" at http://forum.xda-developers.com/showthread.php?t=546805
Other problem is (may be in this case i'm very ignorant) how can i do an hard reset after flashing ? I know soft-reset but hard-reset no.
I've read also "How to install windows mobile 6 for htc p3300(Artemis)?" at http://forum.xda-developers.com/showthread.php?t=601315
Can i apply this also to my pocket PC ?
Thanks in advance and excuse me for my ignorance.
Franco.
Click to expand...
Click to collapse
Hi,
ARTE 200 is the HTC P3301, but I don't know if you can flash the ROM of P3300.
Bye,
Silvio

I have a ARTE200 too. It's called O2 XDA Orbit here. I allways flash the normal Artemis Roms to this phone. The Only Problem is that the Backlight sometimes turn off after reset when i have flashed the custum SPL 1.11.cmon
But this is just a little thing

Oh i forgot. For Hard-Reset you press the left and right softkey button together and then turn on or make a softreset. wait until some text is displayed and you can release the two buttons.
But i think in the forum it's postet somewhere

you can flash the ROMs posted here in the artemis section
but before that you will need to get USPL which allows you to flash custom ROMs (ie ROMs posted by XDA members)
http://forum.xda-developers.com/showthread.php?t=311403

Thanks for all tips. Now i've studied many things and new dubts "born".
I've discovered that my PocketPC is XDA ORBIT (not ORBIT 2).
The question is: for flashing ROM i must install the WM6 original rom (downloaded from xda.o2.co.uk) ?
Otherwise i can use one from the following:
MANILA 2D
NO_NONSENSE SERIES
CLEAN ROM
WM 6.5 BETA SERIES
CLEAN ROM(GER)
If i can't use one of roms posted by sheennick123456, i should download the original rom from xda.o2.co.uk but in the web-site i can upgrade to WM6 only for XDA oRBIT 2 e not for my model. In your opinion, can i solve the problem or forget it ?
I've also tried to search original rom in this site but i can understand that is impossibile, i get wrong ?
I'm still a bit confused and afraid of doing "****" ,excuse the vulgarity.
Others suggestions ?
Thanks again.
Franco

Aragorn2004 said:
Thanks for all tips. Now i've studied many things and new dubts "born".
I've discovered that my PocketPC is XDA ORBIT (not ORBIT 2).
The question is: for flashing ROM i must install the WM6 original rom (downloaded from xda.o2.co.uk) ?
Otherwise i can use one from the following:
MANILA 2D
NO_NONSENSE SERIES
CLEAN ROM
WM 6.5 BETA SERIES
CLEAN ROM(GER)
If i can't use one of roms posted by sheennick123456, i should download the original rom from xda.o2.co.uk but in the web-site i can upgrade to WM6 only for XDA oRBIT 2 e not for my model. In your opinion, can i solve the problem or forget it ?
I've also tried to search original rom in this site but i can understand that is impossibile, i get wrong ?
I'm still a bit confused and afraid of doing "****" ,excuse the vulgarity.
Others suggestions ?
Thanks again.
Franco
Click to expand...
Click to collapse
click "my 4shared" in my signature, you will get original rom o2 rom there

Thanks sheennick123456 for your help but may be i'm not so "clever" and in the folder there are many files. Which one must i download ?
german WM 6.0xdaorbit-windows-update.exe ?
GER_CLEAN.rar ?
WM_6_5_21232.rar?
My XDA orbit has English language and is branded by O2.
Excuse me again for poor training on flashing rom.
Can you confirm me that steps to flash are:
1. Upgrage to WM6 with original roms
2.Apply USPL
3. Flashing With Custom Roms like VERSION 3 SYS/XIP 21051 (clean rom) or MANILA 2D
Thanks again and excuse me for disturb.
Bye.

Aragorn2004 said:
Thanks sheennick123456 for your help but may be i'm not so "clever" and in the folder there are many files. Which one must i download ?
german WM 6.0xdaorbit-windows-update.exe ?
GER_CLEAN.rar ?
WM_6_5_21232.rar?
My XDA orbit has English language and is branded by O2.
Excuse me again for poor training on flashing rom.
Can you confirm me that steps to flash are:
1. Upgrage to WM6 with original roms
2.Apply USPL
3. Flashing With Custom Roms like VERSION 3 SYS/XIP 21051 (clean rom) or MANILA 2D
Thanks again and excuse me for disturb.
Bye.
Click to expand...
Click to collapse
yeah the steps mentioned above are perfect
so here is your O2 english ROM
http://www.4shared.com/file/45953573/aa51d7e8/RUU_Artemis_O2_UK_342062_41132.html

Official P3600i Win 6.0 ROM SWE or WWE anyone!

Hi everyone!
I´m interested in upgrading my P3600 now having Win 5.0 SVE official HTC ROM on it (RUU_Trinity_HTC_SVE_1.23.413.2_103_6275_1.38.00.11_108_Ship), to Win 6.0/6.1 SVE (or WWE) official HTC ROM.
Can anyone help me with that?
Is it possible to use this Tytn ROM (HTC_TyTN_SVE_3.54.263.2_102_6275_1.47.00.10_108) without bricking my device.
Regards Matti

mattixx said:
Is it possible to use this Tytn ROM (HTC_TyTN_SVE_3.54.263.2_102_6275_1.47.00.10_108) without bricking my device.
Click to expand...
Click to collapse
let me get this straight - you're asking if flashing TyTN firmware into Trinity is safe?
Yeah sure, go on
jesus christ, where did these people come from

mattixx said:
Hi everyone!
I´m interested in upgrading my P3600i now having Win 5.0 SVE official HTC ROM on it (RUU_Trinity_HTC_SVE_1.23.413.2_103_6275_1.38.00.11_108_Ship), to Win 6.0/6.1 SVE (or WWE) official HTC ROM.
Can anyone help me with that?
Is it possible to use this Tytn ROM (HTC_TyTN_SVE_3.54.263.2_102_6275_1.47.00.10_108) without bricking my device.
Regards Matti
Click to expand...
Click to collapse
No, do not try it. ONLY flash ROMs specifically designed for your phone. (At least that's what I 'think' jedai was trying to say. )

Thank You SuperSport! We need less sarcasms on the web......I feel kinda stupid, but one cannot catch up with everything. I´ll stick to the official Win 5.0 then I guess!!

mattixx said:
I´ll stick to the official Win 5.0 then I guess!!
Click to expand...
Click to collapse
There are official WM6 roms out there for the P3600i ... and plenty of non-official (but very good) WM6.1 and WM6.5 roms for P3600i too.
eg:
Official WM6 (Aus WWE) Trinity_HTC_WWE_3.00.707.18_Radio_1.46.30.11
Just don't install any roms that are for other phones
If you are going to install any cooked (non-official) roms just make sure you really have a P3600i and not a standard Trinity (the "i" model will have 256M of Storage Memory). There are different roms for P3600i and Trinity.
But please ... PLEASE PLEASE PLEASE ... Install HardSPL before you try and put _any_ rom on there!
How to install HardSPL bootloader on your P3600i
(link removed because user has Trinity not P3600i)
Otherwise we all end up here again

...hi the.decoy!!
Official WM6 (Aus WWE) Trinity_HTC_WWE_3.00.707.18_Radio_1.46.30.11
- is really this an official win6 rom for trinity?or is it only radio?!?I just thought htc never had made other official roms out of win 5....!

donaglia said:
...hi the.decoy!!
Official WM6 (Aus WWE) Trinity_HTC_WWE_3.00.707.18_Radio_1.46.30.11
- is really this an official win6 rom for trinity?or is it only radio?!?I just thought htc never had made other official roms out of win 5....!
Click to expand...
Click to collapse
Yeah It's real. Pretty sure it is the rom that my p3600i actually came with (I know it already had WM6 on it when I bought it).
It contains a Radio Update also, but it is primarily a ROM update.
The Trinity shipped with WM5 but there were offcial WM6 updates for that too.
Have you confirmed which model you have yet? What is you total Storage Memory size?

the.decoy said:
Yeah It's real. Pretty sure it is the rom that my p3600i actually came with (I know it already had WM6 on it when I bought it).
It contains a Radio Update also, but it is primarily a ROM update.
The Trinity shipped with WM5 but there were offcial WM6 updates for that too.
Have you confirmed which model you have yet? What is you total Storage Memory size?
Click to expand...
Click to collapse
...it's a trin 100
speed 400 mhz
ram size 64 mb
flash size 128 mb
data bus 32 bits
storage size 62.86 mb
display 240x320
65536 colors
actually I'm using rubenalf 's supersport translation of win 6.5...sometimes soft reset becames hard reset,and in the latest month tom tom gives graphic problems-
- I'd like to really format everything,but mtty procedure isn't enough maybe...!
so if I try using this old official rom for some days,maybe my trin will rise again....

donaglia said:
...it's a trin 100
speed 400 mhz
ram size 64 mb
flash size 128 mb
data bus 32 bits
storage size 62.86 mb
display 240x320
65536 colors
Click to expand...
Click to collapse
You have a TRINITY not a P3600i.
You need to use SuperSport's HardSPL guide and not the one I gave you.
You are free to use pretty much any of the Official WM6 roms that are out there.

Hi!
I didn´t know that the P3600i had more memory. As I understood it the P3600 and the P3600i was the same but the "i" had the GPS enabled from start.....
Now, i have a P3600, any links to official HTC win6 ROM anyone?

mattixx said:
Hi!
I didn´t know that the P3600i had more memory. As I understood it the P3600 and the P3600i was the same but the "i" had the GPS enabled from start.....
Now, i have a P3600, any links to official HTC win6 ROM anyone?
Click to expand...
Click to collapse
This is the Official OEM WM6 with GPS Enabled. It also includes the SPL, OEM Boot Screens, and Radio 1.46.30.11. If you plan to flash other ROMS after installing this one, be sure to flash Hard SPL Back on. This Flash overwrites HardSPL. This ROM can also be used so you can return your phone for warranty repairs (although I doubt there are any warranties on these still).
http://www.mediafire.com/?v5yjt1zvgjm
PS: Occasionally, I flash this ROM just to clean things up again, and it's sorta nice to run it for a day or so. Very fast and works without problems. I just end up missing the WM6.5 features, so I start flashing again.

mattixx said:
Hi!
I didn´t know that the P3600i had more memory.
Click to expand...
Click to collapse
Just a quick clarification, the P3600i had more storage (which is technically a kind of flash memory).
Sorry but I have to take every opportunity to beat to death this "P3600i has more RAM" myth that plagues the Trinity forum

Thanks!! I´m a total noob when it comes to ROM upgrading. All I want is a working official win6 or win6.1 ROM, preferably SVE but WWE will also be nice.
Again, Thanks to all helpful people out here!

Hi again SuperSport!
I tried the Dopod Asia ROM but got an "invalid vendor" error so I put my original win5 ROM back in....Do I need to change the SPL?

mattixx said:
Hi again SuperSport!
I tried the Dopod Asia ROM but got an "invalid vendor" error so I put my original win5 ROM back in....Do I need to change the SPL?
Click to expand...
Click to collapse
Maybe someone can confirm this for me, but I believe that is exactly what is needed. I am on my phone now, so no link, but be sure you have HardSPL 1.20, and also be sure to enter into Tri-Color screen mode before flashing.

Yeah, the standard SPL is locked to region (SVE), ModelID (TRIN***) and sometimes even Carrier vendor, regarding what ROMs that it will allow you to install.
Even though it is an official OEM 6.1 rom you will definitely need to Hard SPL on there to be able to flash that WWE rom.
As usual, all I can say is ... why wouldn't you install HardSPL?
It is purely an improvement on the original SPL, which provides you the safety of flashing directly from the the Tri-color screen.

Successful ROM upgrading
Hi Decoy and SuperSport!
Thanks tou You guys i dared to try the "FInixNOver_3.6_Normal_Black" WM6.1 ROM.
I was still not able to use the DopodAsian WM6 ROM due to the error "invalid device vendor", but it might be me unsecure in using Olipro HardSpl.
-If i would like to restore SVE WM5.0 ROM back to the device I must install Olipro HardSpl again since it´s overwritten, right?

mattixx said:
Hi Decoy and SuperSport!
Thanks tou You guys i dared to try the "FInixNOver_3.6_Normal_Black" WM6.1 ROM.
I was still not able to use the DopodAsian WM6 ROM due to the error "invalid device vendor", but it might be me unsecure in using Olipro HardSpl.
-If i would like to restore SVE WM5.0 ROM back to the device I must install Olipro HardSpl again since it´s overwritten, right?
Click to expand...
Click to collapse
If you installed HardSPL and then only flashed FInixNOver, then HardSPL is still on your device. If you've flashed an OEM ROM onto your phone, then HardSPL has been overwritten.
With that in mind, if you are going to flash an OEM SVE ROM back onto your phone, then you don't need HardSPL on it because the OEM ROM would in fact write OEM SPL over it anyways.
To verify if you still have a HardSPL installed, enter into bootloader screen and see what is listed there.
To check which SPL is on your device:
*** Enter Tri Color Screen ***
--Hold down the Power & Camera Buttons
--While still holding them down, press the Reset Button using the Stylus
--Release the Reset Button, but continue to hold the Power/Camera buttons until you see the Tri Color Screen.
If you see 1.30.Olipro, 1.20.Olipro, or 9.99 CP, then you already have Hard-SPL on your device. I recommend 1.20 or 1.30 Olipro. To go back to your phone, press the reset button again using your stylus.
To repeat what the.Decoy said before. Please don't try flashing 'Custom' ROMs without having HardSPL installed. It can render you phone unusable. If you are only flashing OEM STOCK ROMs, then you are fine.

Oficial rom's
http://shipped-roms.com/?paged=2