I need your help!!!!
I have flashed my italian diamond with Hard-SPL and after with the 1.37.707.1 rom....
The phone has started normally but a "Unknown Sim Status" message has appeared with no possibility to use the phone.
I have tried to flash the 1.37.456.2 rom too with the same result.
In "device information" settings, in "version" tab, appear:
ROM versione: 1.37.456.2 WWE
ROM Date: 06/19/08
Radio version: 1.00.25.03
Protocol version: not support
HELP!!!!
Have you tried other sim card?
oddball1 said:
Have you tried other sim card?
Click to expand...
Click to collapse
Yes... the problem is the same
Radio doesn't work....
I think I have to:
1) wait the release of the official italian rom;
2) re-install the rom
3) re-install the original SPL
4) take the phone to the nearest HTC Service Center
..... .......
PROBLEM SOLVED!!!!!!!!!!!
It was a hardware problem: the sim didn't touch well with contacts of phone.... (sorry for my bad english....)
I have inserted a cardbord between body and cover near the sim
Related
Hi guys,
I've a problem to restore the original firmware of my VODAFONE V1640.
My PDA accept all the possible ROMs (from official I-MATE to AKU releases) but it don't accept the original VODAFONE ROM.
The problem is that, after upgrading the PDA with VODAFONE ROM the PDA remain blocked on splash screen with ROM version.
No soft/hard reset can solve the problem. To unblock the PDA I've to put it in bootloader mode and upload another ROM...any kind but not a VODAFONE ROM.
Any ideas to solve that issue? Is it possible that this problem is due to I've unlocked the EXT.ROM?
Thank you.
Pablo
VODAFONE 1640
ROM Version: 2.50.15 FLY (09/20/06)
Radio Version: 1.04.10
Protocol Ver.: 42.37.P8
Ext. ROM: Storage
pablito75 said:
Hi guys,
I've a problem to restore the original firmware of my VODAFONE V1640.
My PDA accept all the possible ROMs (from official I-MATE to AKU releases) but it don't accept the original VODAFONE ROM.
The problem is that, after upgrading the PDA with VODAFONE ROM the PDA remain blocked on splash screen with ROM version.
No soft/hard reset can solve the problem. To unblock the PDA I've to put it in bootloader mode and upload another ROM...any kind but not a VODAFONE ROM.
Any ideas to solve that issue? Is it possible that this problem is due to I've unlocked the EXT.ROM?
Thank you.
Pablo
Click to expand...
Click to collapse
Have you emptied the extrom before you flashed Vodafone rom? If not (and there were several files as programs etc) the flash could be failed because branded roms have specific extrom.
.dredd. said:
Have you emptied the extrom before you flashed Vodafone rom? If not (and there were several files as programs etc) the flash could be failed because branded roms have specific extrom.
Click to expand...
Click to collapse
Hi,
yes, the EXTROM is completely empty, moreover the upgrade process is always SUCCESSFULL, no error messages.
I had one idea regaring extrom. After I flashed my V1640 with the IMATE rom, I've cracked the extrom to use it as storage memory. Do you think this can be the problem? An extrom unlocked can be restored to his original (locked) status?
Thank you.
Pablo
pablito75 said:
Hi,
yes, the EXTROM is completely empty, moreover the upgrade process is always SUCCESSFULL, no error messages.
I had one idea regaring extrom. After I flashed my V1640 with the IMATE rom, I've cracked the extrom to use it as storage memory. Do you think this can be the problem? An extrom unlocked can be restored to his original (locked) status?
Thank you.
Pablo
Click to expand...
Click to collapse
Hi
I think complete branded roms (CE rom, extrom, radio rom together) must restore the hidden extrom condition.
Just some spot ideas:
do you put your device into bootloader before flash?
which bootloader version you have?
make a hardreset before flash
has your device been unlocked? (if yes I do not know what to do )
may your flash file be corrupted?
did you try to use maupgradenoid? (of course only if the flash file is not one exe)
did you do a hardreset after flash? (2 softkey and reset simultaneously then press zero)
good luck
.dredd. said:
Hi
I think complete branded roms (CE rom, extrom, radio rom together) must restore the hidden extrom condition.
Just some spot ideas:
do you put your device into bootloader before flash?
which bootloader version you have?
make a hardreset before flash
has your device been unlocked? (if yes I do not know what to do )
may your flash file be corrupted?
did you try to use maupgradenoid? (of course only if the flash file is not one exe)
did you do a hardreset after flash? (2 softkey and reset simultaneously then press zero)
good luck
Click to expand...
Click to collapse
Hi Dredd,
regarding your spot ideas:
1) Yes I've put the device into bootloader before flash
2) Version 2.01
3) Hard Reset before flash done
4) My device was not locked, VODAFONE ITALIA didn't lock it...I've just unlocked the EXTROM
5) Nope, other guys used it without problems
6) Yes I used both ROMUPG and MAUPG...same (unsuccessfull) results
7) Yes I did it...same (unsuccessfull) results
Pablo
Hi guys,
could it be a solution to upgrade back the bootloader? Any other ideas?
Pablo
Well, i tryied to see what information i retrieve with the french rom(QT_FR_9100_2170706_21707106_20710_180406) of qtek 9100 executable, u know, the screen in wich u can get info about the device language, image versiion and model make. Followed the standard procedure , CID unlocked, backed up the rom, no need to sim unlock cbecause it was no locked. Here comes the weird part: the screen that was supposed to return the info (where u still can quit),didn't return any info, it was like upgrading nothing to nothing. It's a g3 and i did the normal way to CID unlock it. now whehn i reboot the phone, the SPL remained the same (1.01), but the IPL has changed from 1.01 to IPL 1.01.0000. Why those four zeros?...neve knew.Anyway i didn't installed any rom , because of no info on that screen...was afraid not to damage my device . Still, the qtek rom provided here for WIZA200,(RUU_Prodigy_1010708_108_Qtek_FRA_SHIP) returned this info.Wich one is correct?, If i want to install a new rom do i have to CID unlock again, even if i didn't installed any?
I forgot to mention that the phone is in french language and i do not know from wich vendor came.
Here's the info:
Rom vers: 1.1.7.8
Rom date: 9/16/2005
Radio: 01.04.10
Protocol:4.013.17
Ext Rom: 1.1.7.110
Hi!
I am totally new to HTC Diamond. I got my set from England (Orange). It was locked. I was able to unlock it with the free solution available. Ok. Now the problem is I heard about TouchFLO but it I can't seem to activate. What can be the reason and what can I do?
Second, mine says it has :
ROM Version: 1.37.405.1 WWE
Radio Version: 1.20.OliNex
IS it ok. Or can I get a new more better version. Whats with radio version? Please guide me what can I do? I right now have no idea. I tried the tutorials as well but I am confused.
thats not the radio version, thats the SPL (Service Provider Lock).
and its a Hard SPL, which i presume you flashed to 'unlock' it.
the Hard SPL lets you flash a different ROM (but voids your warranty) it doesnt SIM unlock it tho.
TF3D (Touch Flo 3D) should run automatically when the phone is started, if it doesnt, go to Start> Settings> Personal tab> Today> Items tab and make sure "TouchFLO 3D" is checked.
Old ROM
thornofcarrion said:
Hi!
I am totally new to HTC Diamond. I got my set from England (Orange). It was locked. I was able to unlock it with the free solution available. Ok. Now the problem is I heard about TouchFLO but it I can't seem to activate. What can be the reason and what can I do?
Second, mine says it has :
ROM Version: 1.37.405.1 WWE
Radio Version: 1.20.OliNex
IS it ok. Or can I get a new more better version. Whats with radio version? Please guide me what can I do? I right now have no idea. I tried the tutorials as well but I am confused.
Click to expand...
Click to collapse
The ROM version you're showing here is really old (as ROM's go!). You can get a link to the latest Orange ROM (v1.93) here, or flash one of the superb cooked ROM's in this forum
grahamkdt said:
The ROM version you're showing here is really old (as ROM's go!). You can get a link to the latest Orange ROM (v1.93) here, or flash one of the superb cooked ROM's in this forum
Click to expand...
Click to collapse
Thanks a lot. But flashing with v1.93 will not do anything bad with the set. I once tried to upgrade my Imate jamin and it went dead and was not repaired. So I am a little hesitant you know.
you have already voided your warranty by flashing a Hard SPL. i would suggest flashing it back to the original, then flashing the latest Orange ROM (its not supposed to be too bad).
mugglesquop said:
you have already voided your warranty by flashing a Hard SPL. i would suggest flashing it back to the original, then flashing the latest Orange ROM (its not supposed to be too bad).
Click to expand...
Click to collapse
Thanks a lot. Could you please further tell me how to flash it.
read the tutorial in the stickie.
lots of reading
Thansk. Just tell me which is the latest and best version that I should use?
did u even look at the other threads? ....
4 threads down from yours:
http://forum.xda-developers.com/showthread.php?t=457980
Ok ok man. i got it myself without looking them thanks. But now I have this problem that messages are not being sent. i tried soft reset and hard reset but no avail. What could be the reason for that? B
By the way I upgraded it with 1.93 flash given above in this thread.
Try the new 2.00 ROM.
You can also try one of the smaller lite ones
(Swtos, Panosha), each time followed by a HARD reset (backup your Internal Storage data first).
If THAT doesn't work, you might have an SMS configuration/operator issue.
A.
messages not sent
make sure you have set the phone to your service provider....in connections
Hello, I've been trying to SIM unlock my new HTC Touch Diamond, but I've been having some issues. MOD EDIT and I've used it on my phone. I've managed to sim unlock my phone with it, therefore I am now able to use my old SIM card. However, since those ROM upgrades it made I've been having a lot of issues with the phone. I found stuff randomly crashing in it (such as manila.exe), my battery is consuming really fast, and even ActiveSync has some trouble sync-ing sometimes.
I've been thinking to restore my phone to its initial state, but I didn't know how to do that. I made a backup with some software the phone came with (Sprite Backup), but I can't restore that backup now. I am assuming that I have this issues because it had some very old versions of radio or such.
Here's what I see when I start my device with volume_down+reset:
Security Unlocked (as a title)
DIAM 100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Click to expand...
Click to collapse
Also, here's what it shows me on Device information:
ROM version: 1.93.479.3 WWE
ROM date: 07/25/08
Radio version: 1.20.Olinex
Protocol version: ...
Click to expand...
Click to collapse
I'm not sure what I'm supposed to do now to make my phone work better. I've been thinking at upgrading the radio by following the steps here: http://forum.xda-developers.com/showthread.php?t=416211. Will that help me? Also, if I update the radio, will my phone still be unlocked? Because the first time I had to run a DiamUnlock.exe in my phone and disable the sim unlock very quickly.
If my phone has a SIM lock again, can I run the same DiamUnlock.exe again to sim unlock it?
Moreover, I've downloaded "[ROM][WWE][23.07.08]Hong Kong Official ROM - 1.93.831.1 52.29.25.12H_1.00.25.05" from your forums, and I would also like to upgrade to it. Will that leave my HardSPL there? Also, will that keep my phone SIM unlocked?
This phone is locked in the Vodafone RO network.
I apologize if I posted this thread in the wrong category, but this seemed like the most appropriate one. Also, I apologize if I didn't make a lot of sense, but I'm a newbie. I welcome additional questions if you have any.
Best Regards,
Steven
Please don't post warez links
this is your one and only warning on this matter.
that software is stolen from a xda member.
Hello,
I have a HTC Touch Diamond p3700. Now I have take a look around at the forum/wiki and other external links. and found a solution to my problem. What I wanna do is change the language from my phone to english. Throught a website found on google I was able to get "HTC Touch Diamond_MRII_RUU_Diamond_HTC_Europe_2.03.401.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship"
from the HTC website (by the provided serial number). my question number 1 is is this file I got compatible with my phone?. Also by reading the wiki about SPL I found out I could do a SPL ROM update (just install the rom with the provide file from HTC website) or do a HARDSPL ROM update. Question number 2 is What is the avantage to have a HARD SPL?.
To my situation isnt it better to have a soft SPL over hard? If I just want to change the OS language! I dont need any tweaks or so. Just want it in english, like how it will be like a brand new HTC comes from US or UK.
I hope you guys can help me out with this question. Thanks in advance
If you want to change stock rom, with another language than on your phone, you have to flash HSPL olinex-unsigned, you can find it on this forum, use 1.93-olinex-unsigned.
You don't have to flash SPL, just if you upgrade your stock rom with same language like on it, which came with your phone, where you buyed, form example if you buyed phone in SWE, rom on it is SWE, and if you try to change lang-rom with WWE, it will show message, "wrong vendor id, or lang id" , than what you have to do, if you change lan OS, from originally, you have to flash with olinex-unsigned...
What I have done now is Flashed to Hard-SPL-Diamond-OliNex.
The problem now is when I try to run the SPL ROM update it will stuck at 0 procent (phone screen) and in windows it say 262 update error.
I have tried with _HTC Touch Diamond_MRII_RUU_Diamond_HTC_Europe_2.03.401.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship which I downloaded from the HTC website and also with RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship which is provided in this forum as supported ROM.
Can anyone help me out?
lhyeung said:
What I have done now is Flashed to Hard-SPL-Diamond-OliNex.
The problem now is when I try to run the SPL ROM update it will stuck at 0 procent (phone screen) and in windows it say 262 update error.
I have tried with _HTC Touch Diamond_MRII_RUU_Diamond_HTC_Europe_2.03.401.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship which I downloaded from the HTC website and also with RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship which is provided in this forum as supported ROM.
Can anyone help me out?
Click to expand...
Click to collapse
Place your device into bootloader mode(soft reset + hold vol. down until you see rainbow screen) before flashing.
Connect to pc....u should see bottom switch from serial to usb then flash device using your RUU_exe.
it say "Trigger USB Host..." Few seconds later than in red "Retry Enter USB"
More Info:
Currently
ROM Verion: 1.93.404.1 NLD
ROM Date: 07/10/08
Radioversion: 1.00.25.05
Protocolversion: 52.29.25.12H
Some Extra Info:
SPL I flashed with, comes from http://forum.xda-developers.com/showthread.php?t=400402 file Hard-SPL-Diamond-OliNex.zip (1.92 MB, 49371 views)
lhyeung said:
it say "Trigger USB Host..." Few seconds later than in red "Retry Enter USB"
More Info:
Currently
ROM Verion: 1.93.404.1 NLD
ROM Date: 07/10/08
Radioversion: 1.00.25.05
Protocolversion: 52.29.25.12H
Click to expand...
Click to collapse
It should just read USB in bootloader mode. Not familiar with above statements. Try another USB port.
when I do (soft reset + vol down + back) it comes into the tri color screen. Then it switch screen to something where it say "no image found" and switch to the screen I descript
Edit:
I have plugged the phone into another usb port now I get the tri color screen with USB on the bottom. Then I run the RUU I downloaded from the htc site. But it cannot detect my current ROM version so I ignore that and just go on. Then the phone jumps into the progress bar screen!! it has been 3 minutes now but still @ 0%
I have no idea what it was or why is that. But I have successfully update the ROM into english. What I have changed from my configuration above was searching for SPL 1.40 on the internet. After reading alot I have the idea that the version 1.30 I had downloaded is not the right one. And unfortunately I cannot find 1.40 on this forum so I had to try with google. After flashing the phone into 1.40 UNSIGNED (yes I took the risk and put the unsigned version on it).
When all that has happened I could easily run the ROM I downloaded from the HTC website and update the phone. Everything goes smoothly without problem.
So the problem lies in version 1.30 HSPL vs 1.40 HSPL.
For people just drop into this website and want to change your ROM etc. here is a good tip. The information given on this website is great, good, and correct! but just beware that the tools provided might be outdated while tutorials, FAQ's, WIKI and forum threads are all taking about the newer version of tools.