Related
Microsoft have released Windows Media Player 10 Mobile but only to manufacturers. It is not, and will not be, available as an update or download unless your manufacturer provides an update or updated ROM.
I pulled a ROM update down from one of the OEMs whove done an update and could extract the files for WMP10M, but I'm not sufficiently up with the whole ROM cooking thing to incorporate them into a new ROM for my Blue Angel.
Anyone fancy giving this a go ?
Can you Zip the files and Upload here?
yeah, let the expert assist you.
I am very keen to have WMP 10 too.
just upload the ms.nbf file of that ROM and the rest is up to us.
This is a link to the ROM update for the Dell Axim x30 that contains WMP10 :
http://support.dell.com/support/dow...eviceid=6672&devlib=7&releaseid=R87096&p=HTTP
I downloaded this and used a tool (which I now cant find - doh!) to extract it.
What else would you guys need ?
Do you need a copy of my current ROM ?
If so, how do I make a copy of it ?
Sorry, that last post was me...forgot to login.
i have downloaded the file.
After extracting, i found 2 *.IMG :roll:
therefore, i try to use UltraISO or MagicISO just to extract *.IMG but it fails.
Some other experts may need to participate
I presume DumpRom will not help us.. Mamaich? :wink:
What kind of Pocket Pc have you upgraded? Dell ??
OK.
I got an iPAQ rom update from HP here : http://h18007.www1.hp.com/support/files/handhelds/us/download/22279.html
I ran it so it copied the filees onto my PC hard drive.
I then ran dumprom.exe against the d2b10110uo.nbf file and got all the files from the ROM.
I have them all in a zip file as I am not sure exactly which ones are required for WMP10M. I have zipped up and attached all the ones that look as though they are WMP10M related.
i suppose all the files has to be zip into *.CAB
and copy over to PDA and unzip it
is this all the files that belongs to WMP?
i think let the expert do some testing
bravo2zero said:
just upload the ms.nbf file of that ROM and the rest is up to us.
Click to expand...
Click to collapse
Sorry, I must hve missed your comment. The rom can be got from here : http://h18007.www1.hp.com/support/files/handhelds/us/download/22279.html
Sorry, tried to upload but it keeps failing.
Anyone tried copying the files in wm.zip to their xda2 and trying to run wmplayer.exe ?
wanna try but at work with no cradle
Locked up after a few seconds of the "wait" icon on my PDA2K running 1.31 WWE and 1.06.02 Radio.
First you are missing many WmFiles,there are many that are not begin to Wmxxxx,but unfortunately I can't remeber others.
And I think DumpRom is missing relocation on Dll files,like discussed time ago
I thought someone had mentioned that WMP10 software is "somehow" tied into the hardware or the OS specific to the devices so it wouldnt be possible to extract the executable application and make a cab or whatever and run it on any other devices that it didnt ship with...
I'm no guru with ROMs and stuff.. but if any one of you guys manages to make this work, it will be awesome!
Good luck!
i heard someone had the cab or a way to install wmp10 ... anyone here knows how?
DEPRECATED VERSION: USE 0.2 BETA INSTEAD
PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT="]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Amazing Thank you very much!
inertiax3 said:
Amazing Thank you very much!
Click to expand...
Click to collapse
wheres the download link ?
Everything's online now!
Have a good time and let me know!
Thank you very much
And is it possible to use it for create a .bin flashable phone rom ?
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
tatoone said:
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
Click to expand...
Click to collapse
thats easy .. heres how to do it
fire up mirage on ur pc and chose the eboot+phone+pda option and select ur file ..
then dont connect the samsung to pc.. instead use file explorer on pc nd go to c and copy the three files to some other folder.. cancel the mirage on pc then
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
i was thinking the same thing.. ? if you try let me know too !
zohaer21 said:
i was thinking the same thing.. ? if you try let me know too !
Click to expand...
Click to collapse
I love your footer about the 8502 being a mistake. I also own one. what a dissappointing and relatively useless machine it is, and I can't find a buyer...
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
tatoone said:
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
Click to expand...
Click to collapse
That's interesting:
can you tell me exactly what rom did you use as a base?
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
Don't think you can.
In another thread, people were talking about a xip part needed to switch from wm6 to wm6.1
famusc said:
That's interesting:
can you tell me exactly what rom did you use as a base?
Click to expand...
Click to collapse
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
tatoone said:
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
Click to expand...
Click to collapse
No, I think there's a problem with payload update.
Thanks i will try it
where to get the part02.raw from ? i wanna work with dh4 rom ?
thanks
Convert Part02.raw to .bin
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Manchurian said:
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Click to expand...
Click to collapse
Thank you for using my kitchen.
First of all I ask you to use version 0.2 BETA: it contains some important corrections in conv3 tool.
Now:
1) Part02.raw is usually bigger than required. So we are interested into its shrinked size. I think that your 78512K bin file should be good.
In 0.2 kitchen it is explained how to check bin size is enough for new data.
2) It's not clear whether you'll have problem with a bin of a different language than raw file. As for my experience, I always got connection problem when I used a different language bin. You can try and then have a look at connection settings and at wifi Internet-Work settings. If you find no connection defined or you can't connect through wifi, than it doesn't work.
You should use a Dutch bin to be sure you'll have no problem.
Hope I helped you,
Bye
Hi, Thank You for your I780 Kitchen ,
this is first time i build a rom,
may i know that where can i found the file
part02.raw?
Thank You for reply =)
PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT="]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Version 0.2: this version contains a new conv3 release. This release it's a little bit more complicated than the previous one but it supports a wider variety of rom images and guarantees correct conversions. Previous release could lead to incorrect roms so you should consider it as deprecated.
For Issue 1, limitations are still the same: you should use a rom of the same language of the dump and mind the result size
this is just great
great job
great effort for the great device.
I will try for sure, thanks a lot
Recreate???
At first thanks for the kitchen!!!
But I got one question... How can I rebuild the dump folder and what files are needed in the kitchen directory to recreate???
Do I just have to start RecreateBin.bat and it uses the files from the dump-directory???
THANKS!!
mievalt said:
At first thanks for the kitchen!!!
But I got one question... How can I rebuild the dump folder and what files are needed in the kitchen directory to recreate???
Do I just have to start RecreateBin.bat and it uses the files from the dump-directory???
THANKS!!
Click to expand...
Click to collapse
You must read the PDF file in the kitchen directory. Some parameters may change according to the ROME used
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
vibranze said:
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
Click to expand...
Click to collapse
you need flashable pda part file for convert,
like XHD1 pda file (you can find in this forum).
vibranze said:
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
Click to expand...
Click to collapse
Hi,
Existing bin file will be used as a model ton convert your raw file. Famusc said that the bin file must be the largest possible. So far, we use the D1 bin file. The probleme is E1 raw file part is larger than D1 bin file.
There may also have concerns related to the language of ROM file. I try to cook a French raw file with an UK D1 rom, and the result is a broken ROM
Hi Eunjea & Webise,
Thanks for the explanation.
My current stock ROM is D1 and how to convert it to .bin format if I want to use mine?
Actually I always use English ROM and replace the wince.nls and add some fonts to support Chinese reading
Btw, how do I know what is the value for first jump, footer start and footer checksum address? In the PDF, the first jump address is on 444400 and in my bintonb0.txt I also have 444400, can I follow the same address?
Cheers,
Vibranze
webise said:
Hi,
Existing bin file will be used as a model ton convert your raw file. Famusc said that the bin file must be the largest possible. So far, we use the D1 bin file. The probleme is E1 raw file part is larger than D1 bin file.
There may also have concerns related to the language of ROM file. I try to cook a French raw file with an UK D1 rom, and the result is a broken ROM
Click to expand...
Click to collapse
I just want to backup my ROM which is built by my operator so that if I have problems with the upgrade I can always go back to my original ROM.
How can I create the bin files for te part 1 and 3?
Can anyone advise, as there is no bin file for the Omnia this kitchen will not be compatible, right? Or is there a way to create one?
I managed to dump an Dutch rom, version E1.. Could you explain how I can make a flashable image for the complete rom and/or how to make a radio rom from the three parts I dumped?
Furthermore, i have had some issues when I dumped the rom with the instructions that were in the readme.pdf.
There are some connection problems, that the originally phone doesnt have..when I flashed my rom, there werent any connection settings visible. e.g. settings > connections > connections > advanced > select networks, here was nothing visible.
It seems a bit like the same problem that people had with the english dumped E1 rom. Is there a chance that certain files from the raw files werent correctly put in the i780_flashable.bin (final product) ?
Is this the latest version of famusc's kitchen?
Hi,
I want to create a bin file with my dumped rom (HHC2 FR), with the Samsung i780 kitchen 0.2 beta, but there is a connection issue.
Like famusc wrote in his post, the problem can be fixed by use another bin with the same language for the conversion. But all the bin I found has this problem.
Does anyone have an old french rom which works fine ?
If not, do you know how to fix this issue ?
Is it possible to fix it with the use of another rom language for the conversion ?
If I find a way to fix it, I'll upload it here.
Thx.
No one can help me ?
We have the same problem with the German rom. It seems that we can't use the kitchen to cook the rom and have to find another way. But here comes the problem. Maybe someone could give us advise....
mievalt said:
We have the same problem with the German rom. It seems that we can't use the kitchen to cook the rom and have to find another way. But here comes the problem. Maybe someone could give us advise....
Click to expand...
Click to collapse
I am inclined to port my WM6.1 release to "some" euro locales (Germania, Italino, French etc) I have ideas on how to do that but I don't think I have the time to selectively port the required MUIs.
I understand that, but maybe you can give us hints on how start filtering the MUIs or what you think we have to do. Just replacing the zylonite_keypad_Us.dll and the S00x files brings the result that the layout changes but the mouse and the touchscreen seem to not get along with it...
What do you think???
mievalt said:
I understand that, but maybe you can give us hints on how start filtering the MUIs or what you think we have to do. Just replacing the zylonite_keypad_Us.dll and the S00x files brings the result that the layout changes but the mouse and the touchscreen seem to not get along with it...
What do you think???
Click to expand...
Click to collapse
Changing the keyboard driver alone will not be sufficient. You need to have supporting MUIs to make them work in harmony. The MUIs need to be salvaged from pure Fr (for example) rom which runs on the desired DPI. IE, the MUIs must be extracted carefully out from the donor rom and then placed in the kitchen with the proper rgus that correspond to the Lang ID. But finding intact MUIs can be a problem in itself. Was there any official release for i780 Rom in Fr?
I don't know if there was in France, but in Germany we have an official release and I have the dumped files extracted from the clear german rom too...
mievalt said:
I don't know if there was in France, but in Germany we have an official release and I have the dumped files extracted from the clear german rom too...
Click to expand...
Click to collapse
So I assume that Germanic keyboard is applicable to Fr as well?
No don't think so because in France they got azerty and we here in germany have the qwertz layout. We just have to change the Y and Z... I don't know if it makes that easier... So you think that replacing the zylonite_keypad_Us.dll or editing it is not he right beginning...?????
mievalt said:
No don't think so because in France they got azerty and we here in germany have the qwertz layout. We just have to change the Y and Z... I don't know if it makes that easier... So you think that replacing the zylonite_keypad_Us.dll or editing it is not he right beginning...?????
Click to expand...
Click to collapse
I think you are on the right track, just that you can't rely 100% on that alone. If you are familar with rom cooking, then you can explore with sourcing out for MUI files from other roms (not necessarily i780) and do trial and error in cooking them.
Ok thanks for helping... I will try some MUIs from other ppc. But I think the problem is that the zylonite_Keypad_Us.dll is Samsung made think...
Thx for helping.
Is there a simple way to just fix the connexion issue in an fr rom ?
I have the raw files, the bin file and I just want to make change to this rom.
The connexion issue is : there is no connexion at the first start of windows mobile, IE and WLM don't work...
I only want to correct this bug, can anyone help me ?
Can I fix that by edit reg config ??
There is a new RAW PDA rom part: i780PDXHi1
Can someone convert it to BIN flashable file... I'm not expert...
http://www.mediafire.com/file/gmnyzmwo33y/SGH-i780_i780PDXHI1.rar
Thanks to:
-ahtiang-
benveq
Its not that hard; try the link attached in the txt below and let me know how it works..
i am not responsible for any damage caused by this flash.
currently i am reading some pdfs on cooking our own rom, just like EFN did.
I think i can compile a rom with the information given by EFN and using some of his sys files.
direct link for eng I1: http://www.mclink.it/personal/MN6073/ROM/Samsung_HI1.zip
knights191 said:
Its not that hard; try the link attached in the txt below and let me know how it works..
i am not responsible for any damage caused by this flash.
currently i am reading some pdfs on cooking our own rom, just like EFN did.
I think i can compile a rom with the information given by EFN and using some of his sys files.
Click to expand...
Click to collapse
This seems to be PXIHH5 96dpi
Link updated : I did the recompiling manually.. it should be oke now!
Thanks, now it works!
Please let me know if the rom is oke.. expecially connection to internet / windows live.
furthermore, this release is still 128 dpi right? Will check if I can build in the 96 dpi files..
so far everything seems OK, I'll give Windows Live a try too.
official windows 6.1 release??
hmm... is this really an official windows 6.1 release??
The i780PDXHI1 ROM
knights191 said:
Its not that hard; try the link attached in the txt below and let me know how it works..
i am not responsible for any damage caused by this flash.
currently i am reading some pdfs on cooking our own rom, just like EFN did.
I think i can compile a rom with the information given by EFN and using some of his sys files.
Click to expand...
Click to collapse
The ROM is only the PDA Part. Seems to be working OK till now! All functions working OK. The Mobile feels a bit more fast also. It is the 128 DPI version. All regular functions are there . An addition is the CNN Link in the Programs folder.
Will test it and then post more feedbacks.
knights191 Can you tell us how to make the flash able ROM from the dumped image.
Can any one upload the full ROM I mean the Phone part too.
PdXHi1
hi people,this rom has 128 dpi but i wonder that does it have eboot+pda+phone or just pda section_? is it possible to make .img file to upgrade totally( eboot+pda+phone) ? another question is that as raw files there are 3 files ( raw01 raw02 and raw03) do they refer also raw01=eboot ,raw02= phone?
pls anyone who upgraded this rom can put some screen of their phones?
thanks a lot...
knights191 said:
Link updated : I did the recompiling manually.. it should be oke now!
Click to expand...
Click to collapse
sorry but which link?
the file from the first post contains only the raw-files! could somebody post the bin file please!? and furthermore it would be nice if somebody could answer: is this really an official wm 6.1 rom for i780?
Yes this ROM is the PDA part only and is 128 DPI. I am also waiting for someone to upload the full Phone + PDA ROM, or may be one of the seniors can tell us more about creating flashable ROMs from the dump, The directions in the EFNs Kitchen were not very lucid.
knights191 Has posted this link in his post. ----> www.studententrip.nl/i780_i2_pda.bin
screenshots of pdxhi1
you can compare the pda and phone versions from here and also these picture shows that it is official rom update( it is total update)
drrkgupta said:
Yes this ROM is the PDA part only and is 128 DPI. I am also waiting for someone to upload the full Phone + PDA ROM, or may be one of the seniors can tell us more about creating flashable ROMs from the dump, The directions in the EFNs Kitchen were not very lucid.
knights191 Has posted this link in his post. ----> www.studententrip.nl/i780_i2_pda.bin
Click to expand...
Click to collapse
thx!!!! very much
benveq said:
you can compare the pda and phone versions from here and also these picture shows that it is official rom update( it is total update)
Click to expand...
Click to collapse
The ROM Posted by knights191 is ONLY THE PDA Part . I am still awaiting the full Phone + PDA version of ROM!
questions
well i am afraid that it is impossible to get phone and boot section from raw files.but i still wonder that part01.raw and part00.raw refer to phone and boot sections? i know that from part02.raw u can get pda section of rom.by the way drrkgupta, did u try all connections and window live messenger?
thanks for info
wm6.1 works little faster than wm6.0
benveq I too think that the raw 1 and 3 refer to the phone part. May be if Ahtiang or someone else contacts some senoir member they can guide them too dump full ROM I mean the Phone + PDA part .
I am still trying out the connections. Will update when I am through with it.
good to hear it working, i am still figuring out how to build a phone and bootlader flashable format from the raw files i have got.
suggestions ?
well as i read from topics part00.raw and part01.raw files includes boot+phone sections and i am 100% sure but i really dont know how o extract them and merge to a totally bin file pls help who knows how to do it!
thanks
Yes I too am of the view that the whole of PDA + Phone are in the dump. The combined file size too is similar to the Asian and the Russian ROMs. May be some senior memebers or the Master Chef EFN can help.