PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT="]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Version 0.2: this version contains a new conv3 release. This release it's a little bit more complicated than the previous one but it supports a wider variety of rom images and guarantees correct conversions. Previous release could lead to incorrect roms so you should consider it as deprecated.
For Issue 1, limitations are still the same: you should use a rom of the same language of the dump and mind the result size
this is just great
great job
great effort for the great device.
I will try for sure, thanks a lot
Recreate???
At first thanks for the kitchen!!!
But I got one question... How can I rebuild the dump folder and what files are needed in the kitchen directory to recreate???
Do I just have to start RecreateBin.bat and it uses the files from the dump-directory???
THANKS!!
mievalt said:
At first thanks for the kitchen!!!
But I got one question... How can I rebuild the dump folder and what files are needed in the kitchen directory to recreate???
Do I just have to start RecreateBin.bat and it uses the files from the dump-directory???
THANKS!!
Click to expand...
Click to collapse
You must read the PDF file in the kitchen directory. Some parameters may change according to the ROME used
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
vibranze said:
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
Click to expand...
Click to collapse
you need flashable pda part file for convert,
like XHD1 pda file (you can find in this forum).
vibranze said:
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
Click to expand...
Click to collapse
Hi,
Existing bin file will be used as a model ton convert your raw file. Famusc said that the bin file must be the largest possible. So far, we use the D1 bin file. The probleme is E1 raw file part is larger than D1 bin file.
There may also have concerns related to the language of ROM file. I try to cook a French raw file with an UK D1 rom, and the result is a broken ROM
Hi Eunjea & Webise,
Thanks for the explanation.
My current stock ROM is D1 and how to convert it to .bin format if I want to use mine?
Actually I always use English ROM and replace the wince.nls and add some fonts to support Chinese reading
Btw, how do I know what is the value for first jump, footer start and footer checksum address? In the PDF, the first jump address is on 444400 and in my bintonb0.txt I also have 444400, can I follow the same address?
Cheers,
Vibranze
webise said:
Hi,
Existing bin file will be used as a model ton convert your raw file. Famusc said that the bin file must be the largest possible. So far, we use the D1 bin file. The probleme is E1 raw file part is larger than D1 bin file.
There may also have concerns related to the language of ROM file. I try to cook a French raw file with an UK D1 rom, and the result is a broken ROM
Click to expand...
Click to collapse
I just want to backup my ROM which is built by my operator so that if I have problems with the upgrade I can always go back to my original ROM.
How can I create the bin files for te part 1 and 3?
Can anyone advise, as there is no bin file for the Omnia this kitchen will not be compatible, right? Or is there a way to create one?
I managed to dump an Dutch rom, version E1.. Could you explain how I can make a flashable image for the complete rom and/or how to make a radio rom from the three parts I dumped?
Furthermore, i have had some issues when I dumped the rom with the instructions that were in the readme.pdf.
There are some connection problems, that the originally phone doesnt have..when I flashed my rom, there werent any connection settings visible. e.g. settings > connections > connections > advanced > select networks, here was nothing visible.
It seems a bit like the same problem that people had with the english dumped E1 rom. Is there a chance that certain files from the raw files werent correctly put in the i780_flashable.bin (final product) ?
Is this the latest version of famusc's kitchen?
Related
Hi, I'm preparing all you need to kook a italian rom by yourself...
in some minutes 1st part, with programs that you need to extract .nb files from .nbh, and reassemble .nbh as you like, how to dump a rom and how recompile it..
bye!!!
ok, the utilityes you need are:
*** all utilities are ready to download in the end of this post!!! ***
1) nbhtool_trin.rar
2) package_tool.rar
3) nbdumper.rar
4) bepe_kichen_trinity_ita_WM-6.1.rar
Code:
6.1 bepe_kitchen.rar
5) Flash_nbh.rar (included into kitchen!)
6) rgu to xml transform an rgu or a reg file into a provxml file!!
7) dsm patcher to update also the dsms files to respect the rom's os and build version
1) nbtool from dutty is usefull to decompile/recompile nbh , decompil enbh, choose nbh to decompile, you have 1 or more .nb files, windows.nb is that you need, the rom, you should find also:
radio.nb (radio)
first/second_splash.nb (the 2 images shown as splashscreens!!!)
ipl.nb (boot of trinity...)
spl.nb
and other that now I not remember...
................
to recompile the nbh file, just select that you need (os.nb, first.nb second.nb)
for my experiences, try first times only with os.nb, choose the file and compile the nbh files,your rom is ready to be flashed into device...
2) package tools analize the dumped os windows.nb and tell about sys and oem versions, more it creates packages of dumped rom, and insert all files into the 2 system directory "oem" and "sys" with button (menu) "build packages"
3) nbdumper from tadzio, it is the important tool togheter bepe kichen, with it you are able to dump "windows.nb"
put windows.nb into the folder, dos prompt and write:
nbdump windows.nb (then press enter...)
in few minutes you have inside also the directory named: windows.nb.dump, iside you can find all files that will be in rom on your device...
4) now open package tools by bepe, search this directory, and analize, after analizing, click on build packages...
after some time, you in "windows.nb.dump" directory have: sys and oem folders...
this is the real os...
now you neeedd xip directory...
copy windows.nb into the directory named:XIP_extract (that you can find in "bepe_kichen_trinity_ita" tool...
copy it into the directory, rename from windows.nb into "os.nb"
click on "Make_XIP.bat" and then you have "xip" folder...
copy xip folder into "rom" folder in of "bepe_kichen_trinity_ita", copy os.nb too into "rom" folder, so you have rom folder and inside:xip fiìolder and os.nb...
ok...
now, oem and sys folder obtained with package tools, copy them into "bepe_kichen_trinity_ita" tools, and you have:
oem, sys, tools, xip_extract and rom folders, and the exes...
now is ready...
you have to click on "buildos.exe" and the rom will be build, ok, now there is a new folder, "temp", now you have finished, only click on createrom.bat and in few seconds you can find into \temp\ folder a file named os-new.nb, this is the new rom, build .nbh with dutty nbtools, and can flash it on your device!!!
5) to flash put nbh created into folder:Flash_nbh, flash....
next, tools and howto: create extended_roms;create own splashscreens, adding own packages (the packages are additional programs... into I left yet 3/4 packages from mine!!).....
*******************************************************************
I must make all credits also to udK, that discovered with me the right way to kook roms...
and invite all people to make some dotations to him, for the hard work that he made to have a good italian rom to mount on our devices!!!
thanks friend...
*******************************************************************
I think is better to try with udk or lasagna roms to start, they are perfext and logically structured as bepe kichen wants!!!
bye!!!
****************************************************************************************
*
* P.S.: and finally I think that if you decide to use udk rom to make experiments, you have to donate him,
* and if uou want to use lasagna rom to learn to use bepe kichen, also you have to make donations to guybrush.
* they worked hard to translate the rom, you must donete to use theyr roms I think is the only think to do
* to tell them "thanks!!!", really...
*
****************************************************************************************
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 2:
how make own splashscreen!!!
just open an image or create one, with also paint;
make it 240x320 pixels, 240 in width, 320 in height...
save it as bmp, with 24 bits...
open it with nb_image_converter
convert to "nb"
save it as first and second.nb...
now, if you don't have windows.nb use dutty's nbtools to extract from rom, reuse nbtools to compile nbh, add
in os: windows.nb
in "first splash" the file first.nb
in "second splash" the file second.nb...
compile nbh file and flash into ppc, when you finish, you can see you freferred splash screens!!
next:
create a package and/or translate the exe/mui files in your language with resource hacker!!!
try to open an exe, or first a mui files if there is into the package!!
you can see:
icon (you are able to change it , but is not important for us!!)
dialog, you can move the object inside them, rename or translate strings and other...
string table, here you can change, translate in your language tje strings of mui/exe!!!
and other, but for modify translate this basts!!
see later!!! bye!!!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 3:
for mui:
if you have traslated them, you have also to rename: exaple, if therer is amui xxx_409.mui, in english of couse, and you stranslated it into italian, you hace also to rename it by xxx_409.mui to xxx_410.mui!!!
and for italians mui you can use the ones from tynh wm6 Italian rom!!!
and also initflashfiles.dat must be traslate...:
and also rgu files:example:
string: "programs" must became "programmi"
string: "my pictures" must became "immagini"
etc.etc.
howto: CREATE A PACKAGE!!!
ok, download theese utility:
wince cab manager from here:
http://www.ocpsoftware.com/
(full funcional trial for 15 days!!!)
and my utility: packages creator (a little tools of mine!! )
from here:
-------------------------------------------------------------------------------
UPPED:
(new version... bugs solved... option improved!!!)
now in bilingual ITA/ENG, and with more option to personalyze your new packages!!
new beta with more and more options to create initflashfiles.txt...
flag:"simulate folder names" on wince cab manager and put reg file into package folder you choice...
example: "...\trypackage\windows\batterystatus\batterystatus.exe"
you have to put reg file into "...\trypackage\to-import.reg" ok???
and here the new beta of package creator!!!
Hi all, from a Bennec83's Idea I released this last version that works with cab analyzer, and make packages from cab files automatically...
*******************************Re-reupped 1st good working release!!! 4.1 *********************
-------------------------------------------------------------------------------
ok!!!!
P.S.: if th bepe kichen shows an error during the kook operation, it will be becouse there is another file (duplicate file) yet present in rom, delete it from other subfolder, not in the package just inserted...
next appointmant to create own extended_rom!!! and some triks on registry (modifing rgu files!!!)
see you!!!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 4 playing with extended rom:
howto: create and use extended roms...
ok, have to download the utility htc_extended_rom_editor
I think is all.... (for now!!!)
your knowledge about roms, its components, how to dump, build, add packages are full... rests to edit rgu and provxml...
but in next days....
bye bey and good experiments!!!
*********************************************************************************
*********************************** ******************************
*********************************** UPDATES ******************************
new version of buildos+packagetools, some imporvements, and context menu on packages to enable/disable them by default!!
new version of buildos, now:
1) xip porting for os ber updating;
2) updater for Rom Creation Date;
3) Updater for Rom version at Boot screen!!!
enjoy!!!
improved some context menus on selected package.....
xip porting for OS version and Rom's Date creations Updater!!
new version of package creator, to have own directory where place shortcuts, and some minor bugs solved
here: and added links in initflashfiles.txt for .htm files for "Help"!!!
P.S.: I need beta testing for my apps, becouse, I go on programming and there are allwais same bung into...
bye!!! ( a big thanks to guybrush and udk for testing and support, but specially to Vibranze for testing package creator!!!)
*********************************************************************************
Traduzione in italiano della guida del Kitchen
Lavori in corso..
ervius said:
Hi, I'm preparing all you need to kook a italian rom by yourself...
in some minutes 1st part, with programs that you need to extract .nb files from .nbh, and reassemble .nbh as you like, how to dump a rom and how recompile it..
bye!!!
Click to expand...
Click to collapse
thanx, let's start cook togheter
--reserved for packages--
I only hope that my 3d iwill be usefull to be better, and share togheter a lot of packages for our trinity devices!!
see lather...
I love you.
This is what I searched for long time.
Two question.
1) What difference there is between this and Orginiale Bepe ROM kitchen form Hermes.
2) Can I use all ROM that i Want to start the cooking?
....
3) This is possible some mirror not rapidshare? (for example www.divshare.com)
Grazie mille.
Viva il P3600.
cicciocant said:
I love you.
This is what I searched for long time.
Two question.
1) What difference there is between this and Orginiale Bepe ROM kitchen form Hermes.
2) Can I use all ROM that i Want to start the cooking?
Grazie mille.
Viva il P3600.
Click to expand...
Click to collapse
1) infinite greetings to bepe for the beautifull tool...
the kichen is the same, only you have os and xip for trinity (after you extrapolated oem-sys folders and xip!!!)
2) you can use all roms you want, also in other languages, but only if they , after you dumped and analyzed with bepe package tools, and have oem and sys folders (and xip folder...), but if you try with roms that have missed files, you must try to insert them into oem or sys dolder, you, after use bepe package tools must see only "oem" and "sys" folder, nothing else, to know that the rom is really ok..., in other case the rom was built in confused mode or with other utilities, that I consider oldier...
bye!!!
and my final point is also share a lot of packages....
for now I think it's all, but in few days I explain also howto build packages and other....
see you!!
ervius, very good tutorial i think it'll be useful not only for italian people but for everyone who want learn how to cook their own rom. Just a tip...be careful, read everything and try to understand how these tools works and check everything before try to flash your device.
Guybrush said:
ervius, very good tutorial i think it'll be useful not only for italian people but for everyone who want learn how to cook their own rom. Just a tip...be careful, read everything and try to understand how these tools works and check everything before try to flash your device.
Click to expand...
Click to collapse
yes... by attentions, use the tools at own risk, and specially use them with "brain"!!!
bye!!
Thanks ervius! you are truly "mythical". I`ll read all with much attention tomorrow, now i`m seat in one park bench to 5 meters from the sea.....
Hi...... morf3o.
added lesson 2 (how to create/modify images and create your splashscreens at ppc boot!!!)
at first post!!
see you later to build our first package!!!
I tried this tools with Lasagna 205 ROM.
I arrived to package tools
When I press "Build Packages" I've this error:
Code:
Syntax error map.txt:
tom
tom is the last lin of map.txt.
Can i delete it witouth problem?
At the end I've also the OEM and SYS directory but there are also three file out all directory:
Recorder.exe
Voice Recorder (link)
Recorder.exe.0410.mui
It's ok?
One Advice.
To arrive at DUMP directory and afther to OEM and SYS I found more easy and fast this way:
http://forum.xda-developers.com/showthread.php?t=316940
Thanks 1000!
cicciocant said:
I tried this tools with Lasagna 205 ROM.
I arrived to package tools
When I press "Build Packages" I've this error:
Code:
Syntax error map.txt:
tom
tom is the last lin of map.txt.
Can i delete it witouth problem?
At the end I've also the OEM and SYS directory but there are also three file out all directory:
Recorder.exe
Voice Recorder (link)
Recorder.exe.0410.mui
It's ok?
One Advice.
To arrive at DUMP directory and afther to OEM and SYS I found more easy and fast this way:
http://forum.xda-developers.com/showthread.php?t=316940
Thanks 1000!
Click to expand...
Click to collapse
so, you have to install also java virtual machine... with this utilities in not necessary...
thanks ciccio but i'd like to continue with bepe's kichen, do you like use it??
ok...
3 files are out, put them into \oem\oemapps\ directory, so you now have only oem and sys directory, then... extract xip etc... etc...
ok!!!
thank's for your answers.
I like also Bepe's Kitchen. GO ON!
For the Syntyax error?
I've to delete "tom" at the end of map.txt?
cicciocant said:
thank's for your answers.
I like also Bepe's Kitchen. GO ON!
For the Syntyax error?
I've to delete "tom" at the end of map.txt?
Click to expand...
Click to collapse
I don't have your error, but if finally you have oem and sys folders, then it works well...
but you can try to delete and post if it work...
bye!!
Sorry for my newbie question...
In my understanding all this tools are working with ROM files you already found "somewhere".
What I want to do first is getting a working ROM out of a Trinty device. E.g. I have a german Vodafone device with the Vodafone custom ROM. I simply want to "copy" this ROM on my Harddisk. No changes. I only want to be able to flash it back if I want to, to have the device in the same state it is now.
Which tool do I have to use?
What do I have to do?
Check this article
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
Ciao
A question ervius:
we suppose that I succeed to modify/create my first ROM, exists a way in order to test it without flash on my device? A way for being sure that if I flash, i do not burn my trinity....
Thanks........ morf3o.
morf3o said:
exists a way in order to test it
Click to expand...
Click to collapse
The only way is flash your trinity and hope
claros said:
Check this article
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
Ciao
Click to expand...
Click to collapse
Thanks... that is what I was looking for. I found this (http://www.modaco.com/Paul-s-guide-to-backin-t255090.html) in the meantime. But the two guides differ: Paul says, that I only need the Part02.raw file. Why?
saminegm said:
Thanks... that is what I was looking for. I found this (http://www.modaco.com/Paul-s-guide-to-backin-t255090.html) in the meantime. But the two guides differ: Paul says, that I only need the Part02.raw file. Why?
Click to expand...
Click to collapse
Your OS is in part2, first two parts are the XIP partition aka your boot sector.
Ciao
Hi all
I'm cooking my own rom using Core Pro Kitchen, so far it's going OK.
I read most of this forum and the WiKi, but still have a couple of questions
first:
Do we really need .rgu files in imgfs? AFAIK they are only used to build .hv files.
I tried to delete theese from \temp\dump before creating OS.nb (after running BuildOS), and the ROM works, at least I don't see any drawbacks.
second:
I'm cooking my own custom package into the rom and need all the files in it to be impossible to modify/delete. All files in the package have +r +s +h attributes set, but I'm sill able to modify them on device.
It seems like the modified file is created "above" the ROM one (sort of copy-on-write), because when I use TotalCommander to delete it, it just reverts to the original file from ROM. Is there anyway to make a file completely unmodifiable? Put it in XIP? do I have to rebuild any of three .dsm files in XIP if add my file there?
The file is about 1-2kb
Any ideas?
Thanks, Serge
russian version can be found on:
http://asusmobile.ru/board/viewtopic.php?t=7816
version 080302_1843
This is english translated version of tool for editing of P525 ROM made by Anper.
Sorry for not so quite good english.
Additionally attached utilities for preparing of GIF "AsusP525GIFConverterByMrToto.zip"
About util KitchenNB0.exe:
Warranty: not any, only can say, that not especially include any harmful code to that utility. And before new version posting was firmware changes in mine PPC that made by that util.
don't known if that util works on other models (don't have it), it's tested only on my own ASUS P525. Flashing was made only thru USBloader.exe (don't knew how - read asusmobile.ru or anywhere in other places).
On mine device installed unchanged bootloader from WM6 official.
On WM5 was tested process completion on pc, but without real tests on pocket.
That Utility allow process images ROMGalaxy.NB0 and Galaxy.NB0
(Advised to use ROMGalaxy.NB0 (withiut bootloader), as more safe variant for Your device).
That images can be got by decoding of Galaxy.cap (decode can be done from that util).
First part of tool allow split to parts, and correcterrors in CHS, cut off bootloader, unpack galaxy.cap to ROMGalaxy.nb0 (used data from tool made by Ingvarr).
Second part allow you process IMGFS partition (partition that contain main
software). In that part partition IMGFS can be extracted to file. Get from that DUMP (in future You can do anything you want with that). After that combine DUMP to IMGFS and at the end combine and recalculate checksum of NB0.
splitting and combining functions of IMGFS to DUMP and back executed by Tadzio made utilities. But so they is made for HTC devices, so I'm correct that accordely to ASUS specific. That functions is called from mine tool (execute bat files is not necessary). Correction may be done by pressing button CORRECTION. ROM size is REALLY CHANGED WITH DECREASING OF nb0 image and accordely to size User storage INCREASED - checked (by recompressing of misar firmwares and by other firmwares corrections).
Checksum calculating made is done by tool, but algorhitm is taken from Ingvarr tools (slightly modified to this tool, that does not create all of file image in memory, but recalculate by chunks).
Process ROMs can in different directories, for no all in one place files garbage.
To flash ready file I'm advise thru bootloader and exactly ROMGalaxy.NB0 (without bootloader). Existence of bootloader you can check in first part of tool.
In that complect persist other tools, needed for coocing your rom.
But accordely to them - you must teach it yourself. I'm don't made that.
Also added in third part possibility to change any of parameters in XIP part of ROM (for correct processing parameters must be changed in order: firstly unpacking, changing, packing, and combining NB0).
Work examples:
1. Open NB0, if that not persist - make it from galaxy.nb0 (by cutting off of bootloader) or from galaxy.cap.
2. If that is homemade firmware, possible will be CHS error in MBR. Correct that by pressing button CORRECT MBR. (Why error persist? - Possible our firmware makers ignore that, or firmware was combined by utilities from Tadzio or other that was not adopted for ASUS (also possible CHS not so sensitive)).
Also may appear message about file size differences with sum of sizes of all partitions - it's not harmful - in most cases simple ignore that.
3. Next is Operations with IMGFS tab. In that part can simple do next processes in shown order. Get IMGFS, Create DUMP, edit DUMP as you wish, from DUMP create IMGFS, combine NB0 new and it's all, can flash. For checking you may open newly created NB0 in first part of tool.
4. Flashing may be done by USBLoader.exe.
Another example - correction and optimization of firmware size:
Shortly about compression:
I'm has provided an opportunity to combine IMGFS.new from DUMP with LZX compression (greatest, but slower starting) and XPR.
Choose by pressing needed button. At once want to warn you about not all firmwares have library with compression LZX, accordely to that after flashing, it will not run further to blue screen.
If you have not broke bootloader, this all is reperable (Many peoples through it passed).
Well, like everything, write at a forum.
And a long life for yoursdevices.
P.S. if you found translation errors - please PM to me.
20080303
Translation fixes, exe packed in own archieve as mainly only it changed
1. unpack kitchen ASUS_P525_NB0_Kitchen.zip
2. place ASUS_P525_NB0_Kitchen.exe from exe.zip to directory from 1.
Thanks DaLiV.
Thanks anper.
Great tools.
Wait for Eng version for a long time.
vivi
thanks anper & Daliv
great tools, Great work!
updated translation.
thanks!
Thanks DaLiV, anper!!
Have been looking for the English version!!
gabz
nice. looks interesting.
will give it a try.
but will it work using wm6/wm6.1 as base ROMs?
cheers!
ericjm said:
nice. looks interesting.
will give it a try.
but will it work using wm6/wm6.1 as base ROMs?
cheers!
Click to expand...
Click to collapse
tool work with WM5, WM6, WM6.1 only for ASUS P525.
anper said:
tool work with WM5, WM6, WM6.1 only for ASUS P525.
Click to expand...
Click to collapse
sweeeeet!
thanks for this one anper (and DaLiV for the english translation!)
can't wait!
How
How can we add additional OEM packages into our rom using this kitchen?
as in all other roms ... split by packages by other tools, if you want, but to that tool return ready dump directory
sorry
DaLiV said:
as in all other roms ... split by packages by other tools, if you want, but to that tool return ready dump directory
Click to expand...
Click to collapse
Sorry, But I cannot understand what you mean. Could you please elaborate?
search forum for tool like "buildos+packagetools" or "dmp2pkg" - then edit packages and after that make conversion back packages to dump
Sweet kitchen
Just letting everyone know that this kitchen can also be used for Dell Axim X51's - I have
For X51 users, make sure you don't click "Repair CHS" - it's for ASUS PDAs only and will result in a bricked ROM
btw You can also use recookstruct as well to sort the dump into packages, you may have to get rid of some entries in "HKEY_LOCAL_MACHINE\System\Inbox\Settings\WelcomeEmail\Templates\ServiceTemplates" because recookstruct can't parse the "®" symbol sometimes found in the key
(Only works with IMGFS, not XIP)
DEPRECATED VERSION: USE 0.2 BETA INSTEAD
PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT="]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Amazing Thank you very much!
inertiax3 said:
Amazing Thank you very much!
Click to expand...
Click to collapse
wheres the download link ?
Everything's online now!
Have a good time and let me know!
Thank you very much
And is it possible to use it for create a .bin flashable phone rom ?
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
tatoone said:
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
Click to expand...
Click to collapse
thats easy .. heres how to do it
fire up mirage on ur pc and chose the eboot+phone+pda option and select ur file ..
then dont connect the samsung to pc.. instead use file explorer on pc nd go to c and copy the three files to some other folder.. cancel the mirage on pc then
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
i was thinking the same thing.. ? if you try let me know too !
zohaer21 said:
i was thinking the same thing.. ? if you try let me know too !
Click to expand...
Click to collapse
I love your footer about the 8502 being a mistake. I also own one. what a dissappointing and relatively useless machine it is, and I can't find a buyer...
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
tatoone said:
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
Click to expand...
Click to collapse
That's interesting:
can you tell me exactly what rom did you use as a base?
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
Don't think you can.
In another thread, people were talking about a xip part needed to switch from wm6 to wm6.1
famusc said:
That's interesting:
can you tell me exactly what rom did you use as a base?
Click to expand...
Click to collapse
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
tatoone said:
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
Click to expand...
Click to collapse
No, I think there's a problem with payload update.
Thanks i will try it
where to get the part02.raw from ? i wanna work with dh4 rom ?
thanks
Convert Part02.raw to .bin
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Manchurian said:
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Click to expand...
Click to collapse
Thank you for using my kitchen.
First of all I ask you to use version 0.2 BETA: it contains some important corrections in conv3 tool.
Now:
1) Part02.raw is usually bigger than required. So we are interested into its shrinked size. I think that your 78512K bin file should be good.
In 0.2 kitchen it is explained how to check bin size is enough for new data.
2) It's not clear whether you'll have problem with a bin of a different language than raw file. As for my experience, I always got connection problem when I used a different language bin. You can try and then have a look at connection settings and at wifi Internet-Work settings. If you find no connection defined or you can't connect through wifi, than it doesn't work.
You should use a Dutch bin to be sure you'll have no problem.
Hope I helped you,
Bye
Hi, Thank You for your I780 Kitchen ,
this is first time i build a rom,
may i know that where can i found the file
part02.raw?
Thank You for reply =)
Hi all.
I have a Touch Diamond (bought in Denmark).
I have tried many cooked roms now and the best I have found than runs blazing fast is this one: httpREMOVE://forum.xda-developers.com/showthread.php?t=483539 - with danish language (hurray).. (cannot post links yet)
But, I find the apps that are preinstalled quite old and I would really like to update them (and maybe completely remove some apps).
Is this possible? I don't know anything about cooking roms. I downloaded Gen.Y's kitchen but with this I can't open a .nbh fil - only .erv can be opened.
I hope someone can help me. I have finally found a rom that suit my needs (well almost), but it is just a bit outdated..
Best regards from Denmark.
Use this to open the .NBH file
cdynu said:
Use this to open the .NBH file
Click to expand...
Click to collapse
Thank you very much for your reply.
I can open the nbh file with htcRIE.
I have found some programs in OS>IMGFS>SYS> and in OS>IMGFS>OEM that I would like to remove/update.
But that doesn't seem possible in htcRIE? I cannot delete any files..
Maybe this is harder to do than I thought?
Best regards from Denmark
Some .nbh files (roms ) are protected for delete ,change some files ; others no .
I am so close (I guess)..
I downloaded "Surface Kitchen" and got the rom file extracted.
I removed som apps.
I build a new rom - but here it goes wrong. Under the process it reports missing "boot.rgu" and something with XIP?
It builds the rom but it doesn't boot up on my phone, guess the boot.rgu file is some crucial
How can I extract the boot.rgu from the rom? Or can I use a boot.rgu from another rom??
Best regards from Denmark