Microsoft have released Windows Media Player 10 Mobile but only to manufacturers. It is not, and will not be, available as an update or download unless your manufacturer provides an update or updated ROM.
I pulled a ROM update down from one of the OEMs whove done an update and could extract the files for WMP10M, but I'm not sufficiently up with the whole ROM cooking thing to incorporate them into a new ROM for my Blue Angel.
Anyone fancy giving this a go ?
Can you Zip the files and Upload here?
yeah, let the expert assist you.
I am very keen to have WMP 10 too.
just upload the ms.nbf file of that ROM and the rest is up to us.
This is a link to the ROM update for the Dell Axim x30 that contains WMP10 :
http://support.dell.com/support/dow...eviceid=6672&devlib=7&releaseid=R87096&p=HTTP
I downloaded this and used a tool (which I now cant find - doh!) to extract it.
What else would you guys need ?
Do you need a copy of my current ROM ?
If so, how do I make a copy of it ?
Sorry, that last post was me...forgot to login.
i have downloaded the file.
After extracting, i found 2 *.IMG :roll:
therefore, i try to use UltraISO or MagicISO just to extract *.IMG but it fails.
Some other experts may need to participate
I presume DumpRom will not help us.. Mamaich? :wink:
What kind of Pocket Pc have you upgraded? Dell ??
OK.
I got an iPAQ rom update from HP here : http://h18007.www1.hp.com/support/files/handhelds/us/download/22279.html
I ran it so it copied the filees onto my PC hard drive.
I then ran dumprom.exe against the d2b10110uo.nbf file and got all the files from the ROM.
I have them all in a zip file as I am not sure exactly which ones are required for WMP10M. I have zipped up and attached all the ones that look as though they are WMP10M related.
i suppose all the files has to be zip into *.CAB
and copy over to PDA and unzip it
is this all the files that belongs to WMP?
i think let the expert do some testing
bravo2zero said:
just upload the ms.nbf file of that ROM and the rest is up to us.
Click to expand...
Click to collapse
Sorry, I must hve missed your comment. The rom can be got from here : http://h18007.www1.hp.com/support/files/handhelds/us/download/22279.html
Sorry, tried to upload but it keeps failing.
Anyone tried copying the files in wm.zip to their xda2 and trying to run wmplayer.exe ?
wanna try but at work with no cradle
Locked up after a few seconds of the "wait" icon on my PDA2K running 1.31 WWE and 1.06.02 Radio.
First you are missing many WmFiles,there are many that are not begin to Wmxxxx,but unfortunately I can't remeber others.
And I think DumpRom is missing relocation on Dll files,like discussed time ago
I thought someone had mentioned that WMP10 software is "somehow" tied into the hardware or the OS specific to the devices so it wouldnt be possible to extract the executable application and make a cab or whatever and run it on any other devices that it didnt ship with...
I'm no guru with ROMs and stuff.. but if any one of you guys manages to make this work, it will be awesome!
Good luck!
i heard someone had the cab or a way to install wmp10 ... anyone here knows how?
Related
Guys,
I searched but didn't see anything about WMP 10 ROM CAB being posted. I searched all combos I could think of so sorry if this is a repost.
HP released a ROM update for an HP rx3000 ipaq
http://h18023.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
This file is a ROM update for the device. I downloaded the .exe and unzipped it, it had the .nbf update file but I'm not sure how to pull the individual cab files out of it, does anyone know how to do this?
Thanks,
If some one can get the password for the rom, I can try to extract the cab.
I would try the same ones used for the MDAIII rom. itsme was the one that came up with the passwords.
Well paul, I'm not going to go fishing for them. So if you want to post them or pm me with them great otherwise. :arrow: :twisted:
HP ROM is not locked!
Guys,
I just opened the HP nk.nbf file and it is not locked, so no password is needed.
Mikee4fun,
Since it is unlocked, can you pull out the cab for the media player 10?
Instructions and names of tools would work also, thanks for any and all help.
Paul.
Re: Windows Media Player 10 MobileROM .nbf file found on HP
paulmc said:
Guys,
I searched but didn't see anything about WMP 10 ROM CAB being posted. I searched all combos I could think of so sorry if this is a repost.
HP released a ROM update for an HP rx3000 ipaq
http://h18023.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
This file is a ROM update for the device. I downloaded the .exe and unzipped it, it had the .nbf update file but I'm not sure how to pull the individual cab files out of it, does anyone know how to do this?
Thanks,
Click to expand...
Click to collapse
I've been trying to download this file, but it always says file not found on the server...
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Re: Windows Media Player 10 MobileROM .nbf file found on HP
ZeroXtreme said:
I've been trying to download this file, but it always says file not found on the server...
Click to expand...
Click to collapse
This is no good. I've downloaded the SP29295.exe and dumprom the nbf file. It confirms my suspicion that it is an update of the HP iPAQ rx3700 OS files (including WMP10 mobile) and not just individual CAB files.
Unless someone can tell me what are the exact files in the WMP10? I've tested using other versions of ROM, and it seems like I've invariably replace files that affects the core integrity of the OS.
However, I still harbour the fantasy that we might port this stuff over to XDA2.
If you can't get to the right URL link, search at google with the following search string:
"HP iPAQ rx3700" "mobile media companion" update
My link:
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
pochreyes said:
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Click to expand...
Click to collapse
Zero,
From this FTP site, download sp29416.exe, it's easier
Paul, the windows media 10 is not a cab install rather a part of the windows mobile 2003 se system. It would require someone to go find all the dll files, registry setting and core file install directory contents to make the whole thing work.
Mike
twinkle said:
pochreyes said:
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Click to expand...
Click to collapse
Zero,
From this FTP site, download sp29416.exe, it's easier
Click to expand...
Click to collapse
Got it, thanks.
RE
Hope that somebody could come out with a cab file for separate installation.
:roll:
lets just hope someone can rip the entire se OS from another device and make it work on XDAII. The 2.02, 2.06 and 2.20.07CHS (translated) are getting their bit by bit...
any got wmp 10 from the rom then pls do share.
thanks
jeet
list the dll files u need and i'll help u to get them coz i have i-mate jam ROM and i'v extracted all rom filed includes all exe and dll files
all i need a list of needed files 8)
I think the lack of knowledge on the files pretaining to Windows Media Player 10 are ther reason why someone is going to have to have a copy of the ROM and go routing about for the files.
Loading rx3700 nbf file into ER2003Edit asks for a password. Is there any way to find that password?!
installing WMP 10 to XDAII
hi guys!
-can someone tell me,is it posible to install WMP 10 to myxdaII?
-Thank you in advance
Hi all,
I am trying to port the mediaplus from AtomLife ROMs which has the second version of mediaplus with icons in circle.
I was successfull in extracting the imgfs.bin but there is onemore file ExROM.img which is not giving up.
I Tried
1. winimage
2. extended drive creator
3. scooter kitchen tools
but i am not able to look into the contents, it has the required _QHiddenPartition directory which has all the theme and image files for FMRadio/Mediaplus and Equaliser.
can anybody help me .
regards
Shreedhara
Mediaplus is very tricky..the images are in Ext ROM..but the links to executables are somewhere from the XIP section..any way keep working
Well
I don't think u understand my problem.
I was able to run the Mediaplus(v1.0) app on my Eten M700 earlier when I had WM5 on my eten.
But after I changed it to WM6, I want something new and hence I am trying to get the Atom Life Mediaplus (v2.0), which is better looking than the earlier one.
But SInce the latest ROM's from O2 have differenct format
It contains
lot of asm.mbss files (Motherboard assembly ) and FLASH.DIO and ExROM.img
with XLDR.nb and EBoot.nb0 files also.
But that Extended rom is hardnut to crack, it does not open at all for any tools we have here.
That'swhy I asked for help, so that I can extract it.
i was able to call tmo tier lvl 3 the other day and was able to have them send me a link to download the "newer" rom for the dash. Now ive checked email and i did get the link will download when i get home work. but from my experiance the rom on the website seems to be a bit bettery with the program memory with the 531.6 rom i only had 15.00mb free and that is with no programs running and with voice commander off with the 531.4 (on the site) i hade 23-24mb avalible
once i download ill post it on mediafire and give the link here
thanks!
NeG
Thank you, quite a few of us have been looking for this.
Supposedly this rom helps with the reboot loop, but not sure.
Thanks again.
Any luck on the rom yet?
spikey911 said:
Any luck on the rom yet?
Click to expand...
Click to collapse
http://www.mediafire.com/?yygkw1d5xmc
Thanks, but that link points to 531.4 not 531.6 that we are looking for.
so yeah they just sent me the same link on the wmupgrade site. I asked and the only change was that its 531.6 has a better way to sync vp exchange server is your using corporate email like ms exchanged that all
Here is 1.22.531.6 dumped from one of my TMO Dash that had it.
http://rapidshare.com/files/103881316/TMO_1.22.531.6.rar
1. If you are on WM5, install the WM6 1.22.531.4 upgrade.
2. Use WinRAR and extract 1.22.531.4 to a folder.
3. Use WinRAR and extract RUU_Signed.nbh from the above download link and overwrite the existing one in the folder you created in step 2.
4. Run SDA_ApplicationUnlock.exe.
5. Run USPL.
6. Run ROMUpdateUtility.exe from the folder created in step 2.
That's it.
Thank you SO MUCH for that.
I have tried to find a way to dump the rom myself, but never found a way to do it.
No prob!
Yeah, dumping it took a little experimentation. bkondisk doesn't work on the Excalibur, turns out good old itsutils pdocread was what we needed.
dumb question, but how do i update my dash from wm6 to 6.1? is there some update utility i need?
Hi
i found a virtual WM 5 & 6 for PC. But to flash the virtual rom i need to have the rom in .bin format insteat of .nbh. Does anybody know how to transform nbh to bin ?
Download artemis touch rom from this forum, open the zipped directory, delete the .nbh original file, put in the directory your .nbh file, flash the rom with the included program.
Jake840 said:
Hi
i found a virtual WM 5 & 6 for PC. But to flash the virtual rom i need to have the rom in .bin format insteat of .nbh. Does anybody know how to transform nbh to bin ?
Click to expand...
Click to collapse
Can you please provide me a link to download it (virtual WM 5 & 6 for PC).
Thanks in advance.
http://www.microsoft.com/downloads/...A5-183A-4A1E-A7E2-CC500ED1F19A&displaylang=en
http://www.microsoft.com/downloads/...3a-a651-4745-88ef-3d48091a390b&displaylang=en
but i still dont know how to open different roms
Thanks. I 'm currently downloading this. I 'll give it a try. If I find out how to change rom I will let you know.
sorry to rez this but if anyone here knows howto install different rom in virtual wm 6.1 please tell me i would love to start editing my touch diamond but would love to start from virtual one
oh and sorry to pop this up in artemis forums if i dont get answers here i'll try asking somewhere else
i found a similar one for wm6.5. found your solution?
cool app,ts very handy to test roms.
i wish i knew how it works,im gonna check it out.
also i wanna check out how to make roms,
it looks me cool to make some
btw,try to rename the file nbh to .bin,maybe it works
This is pretty old, but did anyone success in using an NBH rom in WM6.5 emulator? If so, how?
Ambious said:
This is pretty old, but did anyone success in using an NBH rom in WM6.5 emulator? If so, how?
Click to expand...
Click to collapse
+1!
I would love to know how a cooked ROM .NBH can be used with the emulators
Hello, I'm new here, and I have been attempting to make two custom ROMs for the HP iPAQ 21x series, and I ran into a huge problem. I have two dump folders, and I can't figure out how to turn either of them into an NBH(or NBF) file. Any help would be highly appreciated.
Edit:Oh, and also, in case anyone was wondering, I'm trying to make them a Windows Mobile 6.1 ROM and a Windiows Mobile 6.5 ROM, and they are both(as far as I know) clean, except for the HP stuff.
nbh or nbf... ? for what ? it is inpossible to flash it back, you need bldiag.nb0 and hpimage.bin (foxconn format) but fortunatly pdocwrite works fine, so you need to: dump or download dump of imgfs (part02, os) unpack it via imgfstodump, cook to wm 6,1 or 6.5, then convert back to imgfs via imgfsfrom dump, and write via pdocwrite, xip can be also writed by this way, xip is part01, it works but i'm not a rom cooker so I cant cook it myself...
edit: it is also possible to edit marvell obm's and bootloader, but only via linux
edit2: here is my post about ipaq 214 and pdocwrite http://forum.brighthand.com/showpost.php?p=1762892&postcount=4
edit3: it will also works on any 21x and 11x and as I think on other hp devices manufactured by foxconn
I'm sorry elektrownik, but I don't really get what you're saying, I'm not very experienced with this ROM stuff, this is the first time I've ever tried to make one. But in response to what you're asking(I think), I was going to make them NBH files, make a backup ROM image of the device, and then use the HP RUU, which I have made to look for a file called 'RUU_signed.nbh'(what I will name them), to update the device via Activesync connection.
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
But how do you want to sign it for hpruu it need hp cert and key, or did you cracked it. Anyway here is default rom. http://rapidshare.com/files/2236847...n_marked_internally_with_custom_extra_data.7z
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Fdo35 said:
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Click to expand...
Click to collapse
just do what I wrote - cook wm 6.1 or 6.5 to romdump convert it back to imgfs and it will be posible to write it to device by pdocwrite application
Fdo35 said:
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
Click to expand...
Click to collapse
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Fdo35 do you know how to flash ipaq 21x?
Maybe you can work together with some people already trying to make wm6.5 rom....
Kind regards,
W.
Steven855 said:
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Click to expand...
Click to collapse
What's "parameters", I don't know what you mean. Also I don't remember using NBSplit, I started out with a IMG file which I then dumped.
Edit:Oh wait, I see what you mean. I didn't use NBSplit, I was following the attached directions to reconstruct ROM, except it wasn't for the device the file specified, and instead of 'imgfs.bin', I used a file called 'ipaq214.img', and instead of 'Windows.nb' I used a file called 'flash.nb'. And, I'm pretty sure that elektrownik made both files.
lol why you all dont read what i wrote, i have rom, which was reconstructed from dump, but it impossible to flash it from sd like on htc by flash.bin, ipaq 214 need bldiag.nb0 and hpimage.bin to be flashed from sd, but those files never was released so it is impossible to study format in which they coming, 214 can be also flashed from pc, but it need foxconn application and like before hpimage.bin, and there is official metchod - hpruu, but files which it use need to be signed first, we dont have cert and key to sign them, it wold be possible to patch hpruu to delate sign validation but i dont see anyone who working on this, as i wrote only one working metchod is pdocwrite application, i check it and it works, but i'm not room cooker so i cant cook wm 6.1 or 6.5 imgfs...
I think there are quite few topics about it.
It would be maybe better to have EVERYTHING relevant in one so everyone who posesses knowledge can help.
Now it looks that we (you) are inventing hot water... no offence - i appreciate all the hard work you put into this. But we (you) need better cooperation and clean topic.
I am grateful to everyone who share and try to make something. Respect to you all!
Kind regards,
WODP
The HP iPAQ 110 has a ROM update on HP's website, is it possible to get any of those files from that?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3644061&prodNameId=3644062&swEnvOID=4014&swLang=13&mode=2&taskId=135&swItem=hh-59617-3