Related
I upgraded my T-Mobile with PPC 2002 to the WM 2003 final ROM cooked in Lumpi Stephan's kitchen.
Ever since then, if I try and deploy a Visual Studio.Net application to the device, it more often then not says it can not establish a connection with the device, even though Active Sync is connected and synched up.
This problem is preventing me from trying to put on another ROM via USB craddle using Jeff's OSIMage Tool.
I do understand I can use an SD card to upgrade the ROM, however that doesn't solve the connection problems.
Does anyone have any idea why I'd be getting this error and any suggestions on how to fix it?
Thanks for your help in advance!
Have you tried flashing with sd card using xdatools and nbf file with sd memory card?
how do I use the SD card?
I just ordered a card to see if I can resolve this issue....
Here is my scenario. I don't have a SD card reader on my computer. But I do have two PPC's - one that is working with Active sync and XDATools recognizes, and one that XDATools isn't seeing though Active Sync IS seeing it.
Can I use XDATools to put the ROM on my desktop to the SD card that is inserted into my working PPC, then put the SD card into my half-assed working PPC and install it somehow (of how to do that I am clueless)?
Suggestions? Answers?
Thank you much
You need to download a rom and choose sd card flashing at the base of screen before flashing, you will then unzip the downloaded file, you will have an nbf file, this file will be used by xdatools to program the sd card in the card reader on your pc, When using xdatools, choose the nbf file as source and choose the sd card in the reader from the drop down menu under destination, once it is programmed you insert the card to the phone, push reset while holding power, push centre of 4 way rocker switch when prompted, once finished push once in hole below headset socket, wait one minute and push once more, your phone should now reboot with the new rom.
Hi -
I purchased the 8GB MicroSDHC card from Verizon a week ago. It worked fine on my AT&T Tilt for a few days and than it lost all information! Fortunately, I was able to restore from backup, and it seems to be OK again. Here's the strange part: even though the original files and directories are gone, the card still counts them in used memory. I.e., the used memory is about 200 MB more than it should be, the amount of space I was using before the card crashed. This applies whether I check the memory on the device, connected by USB, or with the Card Adapter that came with the card.
Any ideas what might be causing this and how to recover the used memory short of reformatting the card?
Thanks!
If you could tell us what you did for it to crash it would help
You probably tried to partition it or something...?
Looks like you will have to format the whole card.
Maybe there is a simple way to do this but here is how i would do, if it helps :
- install WM5Storage on your PDA main memory
- start wm5storage with the option memory card and connect your PDA to your PC
Activsync then wont be sync'ing and your memory card will be seen from your PC as an USB-key. Open it on your PC and check to make sure it is your memory card that you see (and not your PDA main memory).
Then use whatever format tool to format your "USB key" with FAT like format, for example you can use HPtool (be carefull to format the key and not another drive !!!).
After this do not forget to turn off wm5storage, otherwise you will not be able to "see" the memory card on PDA side...
Hope it helps, let us know...
by the way maybe you could try this :
http://www.cgsecurity.org/wiki/TestDisk
I've used it sometimes when i had started to format a hard drive instead of an usb key by mistake.
Windows was asking for formating everytime i wanted to open the hard drive folder. However, using this Testdisk tool, i was able to mount the hard drive and recover everything including my photos and music and stuff... Maybe you want to try this awesome tool, plus it is free and OpenSource.
Use wm5storage tool to use your PDA as an usb-key, then use Testdisk on this usb-drive, it might be able to see, list and recover all the "lost" files and heal the whole partition at same time.
Thanks for the suggestions - I'll post again when I have the chance to try them -
No luck
Had a similar problem with my Kaiser (HTC Rom). Yesterday I did something (don't know if it was memmaid - my guess, because otherwise I just installed some cabs I had previously installed in my Wizard with no problem) and my SanDisk 6 GB MicroSD was completely 'erased".
I just noticed after the Kaiser had created new folders over it (Application Data, Cookies, History and Temporary Intenet Folders). My assumption is that something destroyed my partition table (that's why I suspect memmaid, it may have cleaned something wrong) and now I have another partition over the old one.
I tried file recovery and found 1 GB good of files, but there were 5 Gigs on the card... I really wanted to find "program files" so I didn't have to re-install lots of stuff, but no luck.
Tried Testdisk as suggested above, but it never detects any partition, not even the current one. I guess I will have to reformat it and re-do all stuff.
Well, I may be saying lots of dumb stuff, but that's my guess.
Thanks if there is any possible help in this...
Ah, and when I insert the card via a card reader in my notebook and right click properties, it says 717MB free, which means my old files are there waiting for me (new folders have only 736KB of data)... What to do?
Guys need advise do you have to do any patch to be able to use 4-8GB mini SDHC card on your PDA?
I have a Asus P535. Have asked their support site and the reply I got is the max supported is only 4GB.
I believe I've read in more than one place that the Kaiser may support up to 32 Gig, which is the MicroSD maximum. But I may be wrong...
Fact is this has never happened with my Wizard and its 1 Gig MiniSD. Now I'm gonna increase backup and cloning so I don't have to reinstall everything...
But I'll check if there is a patch anyway. Thanks.
I am able to use Sandisk microSDHC 8GB can on Asus P535.
But need a micro adapter to miniSD
mbernstein said:
Ah, and when I insert the card via a card reader in my notebook and right click properties, it says 717MB free, which means my old files are there waiting for me (new folders have only 736KB of data)... What to do?
Click to expand...
Click to collapse
Click properties and then click theTools tab. Run Error-checking with both options checked. When you check your card, you will hopefully see a new directory with recovered files. You can then delete them and regain your disk space. This is what worked for me -
Thanks. I tried that at the time to no avail. I did have to reformat, and then reinstall everything... Now I'm using Sprite Backup, so everything including Storage Card is backed up in case this thing happens again.
And/Or said:
Click properties and then click theTools tab. Run Error-checking with both options checked. When you check your card, you will hopefully see a new directory with recovered files. You can then delete them and regain your disk space. This is what worked for me -
Click to expand...
Click to collapse
It could be WINXP patch
I have the Sandisk 8G , it came with a small USB reader and all was working fine. However my ASUS W5 laptop also has a built-in SD slot so I installed a patch issued by Microsoft to make it HCSD compatible, and it read and write it OK but then I suddenly got the same problem that you've described here.
The disk goes blank but the files still occupy the space, even attempting to reformat the card in the built-in slot will ignore that space,i.e it shows only 5G card.
But reformatting using the small USB card reader was fine and from now on I only use the cardreader to read and write and everything is OK. In my view the XP patch was causing that problem
HI
I have one little problem with microSD card! When I copy some files on card with ActiveSinc or with mobile, speed is 35 Kb/s!!! When I copy the same file with card reader speed is 3-5 Mb/s!!! Is this a problem with my Hermes (AT&T 8525) or with ROM (Shap's 3.60, 4.0, ..., 4.30)? Maybe SDHC driver is problem or something else? Anyone tried some other ROMs?
Are you using vista? I experience the same thing, but only under vista
i am experiencing this as well
using the card reading da speed is very fast
What ROM are you running? Some with SDHC driver?
I am also facing the same problem. I am using vista and Schap's full rom 4.31. Not sure what to do.
At&t 8525
olipro 2.10
I noticed the same - Fixed the problem by using WM5torage and I had write speed
Maybe WM5torage fix the problem when coping from computer to phone (SD) but when I copy from phone to SD card its slow (when I'm recording something with VITO AudioNotes to SD it says that my device is slow and I can't record for a long time)!!! Anyone tried with generic (not custom built) ROM?
Maybe you can use the format of FAT.
This has always been the case when transfering files onto the card via activesync.........just unfortunatly the way the software transfers the files to the device and then to the SD card from there.
As said above, ive overcome the problem with the use of a card reader or using WM5torage.
OK! But my question was is there any way to speed up write speed phone to sd? I always transfer files from my computer with card reader but some PPC programs (VITO Audionotes) are complaining about sd speed and it wouldn't work as they should! Is this problem with SDHC driver or is it device?
Try to change File System cache...
HKLM\System\StorageManager\FATFS\CacheSize
I set CacheSize to 512 and work fine with this settings. Look at this settings in your registry and try to change other parameters.
No! The problem is still there! Something else?
What card are you using ?
Benchmark your memory card with SPB Benchmark or Pocket Mechanic and post here the results..
WM5 Storage on my Schaps 4.22
Ok, I thought I saw WM5 storage in my Rom,, but now that you mention it,,I can't find it (unless it was there on a previous Rom , and not there now). I think ,last time I dug it up by accident, I was asking myself what the hell this SW was used for. So, for speeding up things, how do I use WMstorage to enhance download from PC to SDcard installed on Device? Found WM5Storage through file explorer,,tried it , but can't get my PC to see SDcard..
I would think about the low usb 1.1 speed.
USB 1.1 is slow but not that slow and I am copyng from phone to SD card so this is not a problem and the SD card is also not a problem because i tried few different cards and the result is the same!
I tweaked scroll bar widths and heights (did it before) and changed default location of my Documents from \My Documents to Storage Card\My Documents and then restarted. I also changed hang up time from 1000 milliseconds to 400 milliseconds and lastly menu font size to large then restarted and now my storage card is gone!
I cant even restore from SPB Backup because the backup image is on the storage card and the desktop program backs up but doesnt restore (this is assuming I can use a card reader to retrieve yesterday's backup file).
What to do? Obviously I reverted the options I changed above to default but still nothing.
I went to Memory in Settings but it says Total Storage card memory: Not Installed.
I obviously restarted a few times and then shut the phone down and took the card out then started it back up but still nothing.
HELP please !
SOLVED
The problem was the card was not being recognized on my device and being rejected by windows XP with the below mentioned problem. There was a timeout meaning the the PC could not make a connection to display it's contents and the problem arised from a semaphore issue. I learned that sephamore basically means that there is a really long destination address of a file.
Meaning the first example below is acceptable in lenght
\Storage Card\My Documents\My Pictures\Summer\picture121.jpg
The above is pretty long but within the standards of windows mobile and PC.
Apparnetly there was a destination address of a file that was:
\Storage Card\My Documents\My Pictures\Summer\July\Beach\Boating and Snorkling\picture121121323213.jpg
The above is way too long for the device or the PC to follow.
Firstly, I know for a fact that I dont have too many deep files dug. Mostly my folders are superficial and located in \Storage Card\ My Documents
So there will be
\Storage Card\My Pictures\picture121.jpg
\Storage Card\My Documents\kayak pricing.xls
\Storage Card\My Videos\video001.mpg
So im not sure how such a semaphorical(spl?) error occurred.
Secondly, I could not access the contents of my memory card to investigate the lengthy file.
Plugging the card into a card reader generated the |cannot access| problem. I decided that if I could not access the data to edit/amend the problem then I would need to format it and thankfully I had just created my StorageCard backup (2 days ago) which I could load onto the formatted card.
Problem is I could not right click the drive to select the format function. Oh oh!
Was my situation useless? NO!
I remember that you can format a hard drive in windows command utility.
So I did that, formatted really well then used SPB Backup Unpacker to copy the files back to my card and it works!
Last question is what did I do in Advanced Config to create this hassle? As I said above, those were the only items I tweaked which were within safe parameters.
Ok I plugged the storage card into my card reader but my computer did not recognize it.
Nothing happened (you know the pop up window saying a card was inserted/what would I like to do). I tried opening My Computer but it froze!
Could Advanced Config have corrupted my storage card?
Of the options mentioned above, I think changing the default location of My Documents (device) to Storage Card\My Documents messed something up!
Ok after a 5 min froze, My Computer appeared and I could see Removable Disk (h but opening it froze the folder (Explorer) again.
I popped aonther memory card into my HD and it showed up as normal on the phone.
Also, after another 5 mins of freeze, I got a on my desktop that says:
H:\ is not accessible
The sephamore timeout period has expired.
WOW? Whats that. Of all my 15 years with windows ive never seen that error before!
sounds like its bollixed so
bump bump please
Have you tried StorageTools from www.softwinter.com
This can be installed on the HD and then run to check the SD card. I used it to confirm my card had been corrupted by something (when my PC would not accept the SD card).
I then used it to reformat the card - now works fine.
i would also suggest StorageTools
i recently formated my 8Gb card with it after i tryed any other method i could imagined and anything fails, including using my PC
inserting card into my PC's sd card slot, connecting HD to my PC as disk drive, poping the card into a card reader, sktools, pocket mechanic, etc.
so, try to use this software for formating your card, and, maybe, after that your problem will be solved
good luck!
Problem Fixed.
See first post.
I had a similar problem where my micro SD card became corrupted. Couldn't format it via Vista so used my camera to format it in the end. Then reformatted it via the PC.
I've disabled all the File System caching tweaks as I think these caused the problem. Generally I keep all writes to the SD card to a minimum as well to minimise chances of corruption.
As long as you guys backup the storage card to your computers you should be fine!
what worked for me...
okay, this worked for me...
I had a memory card (MicroSD) on 16GB and suddenly it wasn't working anymore after a soft reset. Strange.
But i looked around on the net what to do but
I could not read the card via my computer. (it froze)
and I could not format the card (not by right clicking on drive and either via command prompt)
I could not get contact to the card via my phone.
Then I tried several format programs to pc (pro formatter and so) and none of them could do anything and they could not see how many GB there was on the card.
But then i found the program HDD Low Level Format Tool. I could not see the format on the card but it could see how many GB there was on the card. I tried to format it via the program and the program came with ALOT of errors. The card still didn't work but now I could format it via command prompt after that. Could not do that before formatting it with that program.
So all in all.
Format your card with HDD Low level format tool (dload)
Then go to run (WIN + R) and run CMD
type:
format x: (x being the letter of the card drive)
That was what worked for me after alot of hours trying to get it to work. And works good so far. and ofcause try to format the card without installing the HDD Low Level Format Tool if you can't do it then try the program.http://hddguru.com/content/en/software/2006.04.12-HDD-Low-Level-Format-Tool/
Hopefully someone on here can help me. I've just been adding speecameras to the Tomtom app on my HD. The first set went on OK, but when I tried adding a second, then starting up the Tomtom app to check all was OK, it came back with the following message:
"The file 'TomTom Navifgator' cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be foind. If the problem persists, try reinstalling or restoring this file."
Now I wouldn't mind doing as it says, but I thought I'd try a soft reset first - but when the phone 'booted' back up, all of the other installed apps, also failed, with the same message.
Apps include gsen, HD Tweak, mini gps, among others.
These were all working fine previously.
Anyone have any ideas as I don't want to have to re-install all of them again?
Thanks.
sounds like a corruption has happened somewhere. check your SD card (if that's where you installed them) and look for suspicious characters, or missing files. When it happened to me on my old phone all the directories were suddenly empty!!
I did install them all on the sd card. Had a look and it doesn't appear to be corrupt.
Boris71 said:
I did install them all on the sd card. Had a look and it doesn't appear to be corrupt.
Click to expand...
Click to collapse
Did you change any settings with HDtweak, have the same problem at this time, only programe I added was HD tweak 5.4.x. Good luck
Maybe the same problem
I've also had a problem like this once on my HD. I remember, I had just installed HDtweak when it appeared first time. I could not find any solution on how to fix it, so I did a Hard Reset...
Hope anyone can fix it.
My HD said that ".NET framework 3.5" is needed (it was installed), and I tried over and over again to reinstall it, but it just gave me another error. Do your device do this?
Had a similar problem, after using Storage Card and HD in USB mode. All of a sudden my Storage Card appeared in Windows and Resco Explorer twice, Storage Card and Storage Card2. Of course none of the programs would want to start, since the path was changed.
I copied all the programs from the storage card to the desktop (with the intention to reformat the card), reset the HD without the storage card, put the card back in - card #2 was gone - and copied all the files back to the card. Solved my problem.
Very odd. Bit the bullet and started re-installing the apps (not as painful as I thought actually) and they all installed, overwriting the existing version - except, similar to Lucas 0511, they seemed to now be on Storage Card2. And a 'normal' (on device) folder had been created, named Storage Card.
All works OK, but I really don't understand it!?!?
Lucas0511 said:
Had a similar problem, after using Storage Card and HD in USB mode. All of a sudden my Storage Card appeared in Windows and Resco Explorer twice, Storage Card and Storage Card2. Of course none of the programs would want to start, since the path was changed.
I copied all the programs from the storage card to the desktop (with the intention to reformat the card), reset the HD without the storage card, put the card back in - card #2 was gone - and copied all the files back to the card. Solved my problem.
Click to expand...
Click to collapse
I encountered similar problem in the past.
Both My diamond and HD also have got similar problem.
Diamond: suddenly showed up 2 internal memory.
HD: 2 SD card.
One episode, my card was even corrupted.
=>>
I think your card was corrupted.
No, not corrupted, but during USB disk drive mode access to the card for other apps is blocked. So if an app on the device (in my case usually Opera) attempts to write to the card during USB disk mode it cannot find it - and hence will create and write into a new Storage Card folder.
After the USB disk drive mode is closed the folder name "Storage Card" is now taken, so the card will automatically be reassigned to "Storage Card2" - and apps installed to Storage Card previously will no longer find it.
Solution: Delete the "new" Storage Card folder, card out, reset, card back in - and all should be back to normal.
I've had this problem too. It'll manifest as all the icons for programs installed on your SD showing up as blanks. When you go into your file manager you'll see Storage Card and Storage Card2. Storage Card2 is your storage card, but because all your shortcuts are looking for stuff on Storage Card, it can't find the data.
One cause may be that for some reason your mail application starts writing attachments to a new, non-existent storage card. All you have to do is delete it. (Make sure you're deleting the right one - you can remove the other if you want to be belt-and-braces safe, but just checking in the file manager is probably good enough.)
I've had this problem a couple of times on my Kaiser. Unfortunately the only way to correct it was to do a hard reset as I couldn't find any solution anywhere. So far it hasn't happened on my HD.
cont...bugs88...
if your device is showing 'storagecard' and 'storagecard2',
remove memory card, now the file explorer will still show 'storagecard',
delete the 'storagecard' and reinsert the memory card,
perform soft-reset.....