All installed apps failing - Touch HD Themes and Apps

Hopefully someone on here can help me. I've just been adding speecameras to the Tomtom app on my HD. The first set went on OK, but when I tried adding a second, then starting up the Tomtom app to check all was OK, it came back with the following message:
"The file 'TomTom Navifgator' cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be foind. If the problem persists, try reinstalling or restoring this file."
Now I wouldn't mind doing as it says, but I thought I'd try a soft reset first - but when the phone 'booted' back up, all of the other installed apps, also failed, with the same message.
Apps include gsen, HD Tweak, mini gps, among others.
These were all working fine previously.
Anyone have any ideas as I don't want to have to re-install all of them again?
Thanks.

sounds like a corruption has happened somewhere. check your SD card (if that's where you installed them) and look for suspicious characters, or missing files. When it happened to me on my old phone all the directories were suddenly empty!!

I did install them all on the sd card. Had a look and it doesn't appear to be corrupt.

Boris71 said:
I did install them all on the sd card. Had a look and it doesn't appear to be corrupt.
Click to expand...
Click to collapse
Did you change any settings with HDtweak, have the same problem at this time, only programe I added was HD tweak 5.4.x. Good luck

Maybe the same problem
I've also had a problem like this once on my HD. I remember, I had just installed HDtweak when it appeared first time. I could not find any solution on how to fix it, so I did a Hard Reset...
Hope anyone can fix it.
My HD said that ".NET framework 3.5" is needed (it was installed), and I tried over and over again to reinstall it, but it just gave me another error. Do your device do this?

Had a similar problem, after using Storage Card and HD in USB mode. All of a sudden my Storage Card appeared in Windows and Resco Explorer twice, Storage Card and Storage Card2. Of course none of the programs would want to start, since the path was changed.
I copied all the programs from the storage card to the desktop (with the intention to reformat the card), reset the HD without the storage card, put the card back in - card #2 was gone - and copied all the files back to the card. Solved my problem.

Very odd. Bit the bullet and started re-installing the apps (not as painful as I thought actually) and they all installed, overwriting the existing version - except, similar to Lucas 0511, they seemed to now be on Storage Card2. And a 'normal' (on device) folder had been created, named Storage Card.
All works OK, but I really don't understand it!?!?

Lucas0511 said:
Had a similar problem, after using Storage Card and HD in USB mode. All of a sudden my Storage Card appeared in Windows and Resco Explorer twice, Storage Card and Storage Card2. Of course none of the programs would want to start, since the path was changed.
I copied all the programs from the storage card to the desktop (with the intention to reformat the card), reset the HD without the storage card, put the card back in - card #2 was gone - and copied all the files back to the card. Solved my problem.
Click to expand...
Click to collapse
I encountered similar problem in the past.
Both My diamond and HD also have got similar problem.
Diamond: suddenly showed up 2 internal memory.
HD: 2 SD card.
One episode, my card was even corrupted.
=>>
I think your card was corrupted.

No, not corrupted, but during USB disk drive mode access to the card for other apps is blocked. So if an app on the device (in my case usually Opera) attempts to write to the card during USB disk mode it cannot find it - and hence will create and write into a new Storage Card folder.
After the USB disk drive mode is closed the folder name "Storage Card" is now taken, so the card will automatically be reassigned to "Storage Card2" - and apps installed to Storage Card previously will no longer find it.
Solution: Delete the "new" Storage Card folder, card out, reset, card back in - and all should be back to normal.

I've had this problem too. It'll manifest as all the icons for programs installed on your SD showing up as blanks. When you go into your file manager you'll see Storage Card and Storage Card2. Storage Card2 is your storage card, but because all your shortcuts are looking for stuff on Storage Card, it can't find the data.
One cause may be that for some reason your mail application starts writing attachments to a new, non-existent storage card. All you have to do is delete it. (Make sure you're deleting the right one - you can remove the other if you want to be belt-and-braces safe, but just checking in the file manager is probably good enough.)

I've had this problem a couple of times on my Kaiser. Unfortunately the only way to correct it was to do a hard reset as I couldn't find any solution anywhere. So far it hasn't happened on my HD.

cont...bugs88...
if your device is showing 'storagecard' and 'storagecard2',
remove memory card, now the file explorer will still show 'storagecard',
delete the 'storagecard' and reinsert the memory card,
perform soft-reset.....

Related

Storage Card 2???

Yesterday I've re-installed my MDA Pro.
I use the QTek 1.30.77 WWE ROM, QTek 1.30.176 WWE extended ROM and the 1.11 Radio ROM.
After the hard reset I've installed all the programs from the extended rom and after that I cleared out the extended rom and used this for some SPB Apps (Not Pocket Plus, I installed this one on my local device).
But now when I perform a soft reset, the phone changes the name of my SD card to "Storage Card 2" and it creates a directory "Storage Card" where a temporary internet files directory is located.
I also used a reg tweak to let IE store my temp internet files on my SD card, but now it seems that when I reset my MDA it creates a temporary internet files directory when the storage card isn't detected yet.
But I haven't had this problem before.
Is there anyone who has a solution? Because now some programs are installed on my storage card and they don't work because the path to the executables is wrong. Maybe it has something to do with installing programs on my extended rom???
Why this happens:
If for any reason it cannot find the SD on boot (fast enough) it will create a folder called Storage Card to put the temp files (or inbox or whatever) so that the path \Storage Card\... exists. Now as soon as the SD becomes available, since there is already a folder called Storage Card it is forced to name itself Storage Card 2.
Solution: Delete the "Storage Card" folder and soft reset.
joannaex said:
Why this happens:
If for any reason it cannot find the SD on boot (fast enough) it will create a folder called Storage Card to put the temp files (or inbox or whatever) so that the path \Storage Card\... exists. Now as soon as the SD becomes available, since there is already a folder called Storage Card it is forced to name itself Storage Card 2.
Solution: Delete the "Storage Card" folder and soft reset.
Click to expand...
Click to collapse
Yes I gues this is the problem. I already tried your solution, but it won't help. It will create a new directory with the name Storage Card so that my SD card again will be renamed to Storage Card 2.
Move the temp internet files back to the main memory and delete the folder. Apparently it does not read your card fast enough.
Going to try that. But I just don't understand. I have a SanDisk 2g Ultra 2 SD card, so the card is fast enough. I never had this problem before, just after the hard reset from yesterday.
I know have linked the temporary internet files folder to my local machine and it seems that this works!
Only I still want to know if there's a solution so that I can store my temp ie files to my SD card without the issue of the "storage card 2".
I remember reading this problem before. I believe the solution can be found on Buzz's Ext ROM Unlocker thread.
cktlcmd said:
I remember reading this problem before. I believe the solution can be found on Buzz's Ext ROM Unlocker thread.
Click to expand...
Click to collapse
Couldn't find that in the post, but I reset my device again and didn't installed programs on my extended rom. This seemed to work, so maybe that was the problem.
thanks, i freaked out, almost done a hard reset, then searched XDA through google, found this solution, it worked 100%.
thanks guys

SanDisk 2GB Memory Card Problem

I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
gerald20000 said:
I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
Click to expand...
Click to collapse
Pull the card out and pop it in a Normal PC Card reader and see if you can see the contents. For some reason PPC's will occasionally corrupt the formatting of the card to majke it unreadable to it but PC's sometimes can. If you can read it with a PC, then copy the contents off, reformat usign the PC and copy the contents back and try it in the PPC again.
ok will do that. but isnt that dangerous to lose data tat way? also, when i could read the memory card, the folders r there but the files r gone. possible virus?
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Were you able to copy your info off of the card? How were you trying to format it?
Make sure that you DON'T have a window to the card open when trying to format.
HELP ME WITH ADVISE!
My problem is back again. My data at certain folder in the memory card is disappeared but still able to browse the memory card. Then i soft-reset a couple of times and the data comes back. It took the dopod 838 pro to read the memory card very long time b4 able to show the data on the card.
What should i do?
Check the registry key HKEY_LOCAL_MACHINE\System\StorageManager. There are two DWORD values - PNPUnloadDelay and PNPWaitIODelay. If they are not set to 8196 - do that.
its 8196 as posted...
Looks to me like 2 possibilities:
Your SD Card is shot; or
Your phone has lost the plot.
If it reads OK on the PC card reader, the card is probably OK.
I'd try a hard reset of the phone first. (Make sure you have backed up everything first.)
Also, clean the SD slot as best you can to make sure there are no biscuit crumbs or old socks fallen into the hole.
gerald20000 said:
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Click to expand...
Click to collapse
Seems like some problems with this card. You didn't try another one?

-SOLVED- Tweaked w/ Advanced Config & now Stg. Card gone

I tweaked scroll bar widths and heights (did it before) and changed default location of my Documents from \My Documents to Storage Card\My Documents and then restarted. I also changed hang up time from 1000 milliseconds to 400 milliseconds and lastly menu font size to large then restarted and now my storage card is gone!
I cant even restore from SPB Backup because the backup image is on the storage card and the desktop program backs up but doesnt restore (this is assuming I can use a card reader to retrieve yesterday's backup file).
What to do? Obviously I reverted the options I changed above to default but still nothing.
I went to Memory in Settings but it says Total Storage card memory: Not Installed.
I obviously restarted a few times and then shut the phone down and took the card out then started it back up but still nothing.
HELP please !
SOLVED
The problem was the card was not being recognized on my device and being rejected by windows XP with the below mentioned problem. There was a timeout meaning the the PC could not make a connection to display it's contents and the problem arised from a semaphore issue. I learned that sephamore basically means that there is a really long destination address of a file.
Meaning the first example below is acceptable in lenght
\Storage Card\My Documents\My Pictures\Summer\picture121.jpg
The above is pretty long but within the standards of windows mobile and PC.
Apparnetly there was a destination address of a file that was:
\Storage Card\My Documents\My Pictures\Summer\July\Beach\Boating and Snorkling\picture121121323213.jpg
The above is way too long for the device or the PC to follow.
Firstly, I know for a fact that I dont have too many deep files dug. Mostly my folders are superficial and located in \Storage Card\ My Documents
So there will be
\Storage Card\My Pictures\picture121.jpg
\Storage Card\My Documents\kayak pricing.xls
\Storage Card\My Videos\video001.mpg
So im not sure how such a semaphorical(spl?) error occurred.
Secondly, I could not access the contents of my memory card to investigate the lengthy file.
Plugging the card into a card reader generated the |cannot access| problem. I decided that if I could not access the data to edit/amend the problem then I would need to format it and thankfully I had just created my StorageCard backup (2 days ago) which I could load onto the formatted card.
Problem is I could not right click the drive to select the format function. Oh oh!
Was my situation useless? NO!
I remember that you can format a hard drive in windows command utility.
So I did that, formatted really well then used SPB Backup Unpacker to copy the files back to my card and it works!
Last question is what did I do in Advanced Config to create this hassle? As I said above, those were the only items I tweaked which were within safe parameters.
Ok I plugged the storage card into my card reader but my computer did not recognize it.
Nothing happened (you know the pop up window saying a card was inserted/what would I like to do). I tried opening My Computer but it froze!
Could Advanced Config have corrupted my storage card?
Of the options mentioned above, I think changing the default location of My Documents (device) to Storage Card\My Documents messed something up!
Ok after a 5 min froze, My Computer appeared and I could see Removable Disk (h but opening it froze the folder (Explorer) again.
I popped aonther memory card into my HD and it showed up as normal on the phone.
Also, after another 5 mins of freeze, I got a on my desktop that says:
H:\ is not accessible
The sephamore timeout period has expired.
WOW? Whats that. Of all my 15 years with windows ive never seen that error before!
sounds like its bollixed so
bump bump please
Have you tried StorageTools from www.softwinter.com
This can be installed on the HD and then run to check the SD card. I used it to confirm my card had been corrupted by something (when my PC would not accept the SD card).
I then used it to reformat the card - now works fine.
i would also suggest StorageTools
i recently formated my 8Gb card with it after i tryed any other method i could imagined and anything fails, including using my PC
inserting card into my PC's sd card slot, connecting HD to my PC as disk drive, poping the card into a card reader, sktools, pocket mechanic, etc.
so, try to use this software for formating your card, and, maybe, after that your problem will be solved
good luck!
Problem Fixed.
See first post.
I had a similar problem where my micro SD card became corrupted. Couldn't format it via Vista so used my camera to format it in the end. Then reformatted it via the PC.
I've disabled all the File System caching tweaks as I think these caused the problem. Generally I keep all writes to the SD card to a minimum as well to minimise chances of corruption.
As long as you guys backup the storage card to your computers you should be fine!
what worked for me...
okay, this worked for me...
I had a memory card (MicroSD) on 16GB and suddenly it wasn't working anymore after a soft reset. Strange.
But i looked around on the net what to do but
I could not read the card via my computer. (it froze)
and I could not format the card (not by right clicking on drive and either via command prompt)
I could not get contact to the card via my phone.
Then I tried several format programs to pc (pro formatter and so) and none of them could do anything and they could not see how many GB there was on the card.
But then i found the program HDD Low Level Format Tool. I could not see the format on the card but it could see how many GB there was on the card. I tried to format it via the program and the program came with ALOT of errors. The card still didn't work but now I could format it via command prompt after that. Could not do that before formatting it with that program.
So all in all.
Format your card with HDD Low level format tool (dload)
Then go to run (WIN + R) and run CMD
type:
format x: (x being the letter of the card drive)
That was what worked for me after alot of hours trying to get it to work. And works good so far. and ofcause try to format the card without installing the HDD Low Level Format Tool if you can't do it then try the program.http://hddguru.com/content/en/software/2006.04.12-HDD-Low-Level-Format-Tool/

Unavailable SD Card issue after (any) Rom Upgrade...Please help!

This is my first post, and I'm usually pretty careful about following instructions. I'm currently running Skyraider's 3.0 RC2, but to my dismay, I am finding that my phone still refuses to recognize my SD Card. Under settings it says it is unavailable, and when connected to PC, it gives an option to mount to disk but doesn't mount upon selecting this.
My phone is rooted with S-Off and 2.15 radio...Did a full wipe of everything before I flashed 3.0 RC2. Shows that my kernel is now King #2, but I have had this issue with many other roms and kernel combinations. I have been unsuccessful in finding a solution when searching the forums, and the only way to regain functionality is to restore a previous backup without any roms installed.
Any help is much appreciate. Thanks!!!
P.S. I've also tried mounting the card in clockworkmod's advanced recovery settings, but this does not change a thing. Internal storage is also currently unavailable. Mount through usb in recovery does work, but this doesn't help when I cannot access my sd card after boot.
I had a similar issue a couple days ago after upgrading from stock 2.1 to SkyRaider 2.5.2.
When I'd go to set my ringtones, the option for the SD card wasn't there. As if it wasn't reading it was in the phone at all. I opened up Astro file manager to see if it could read it and it in fact did. I could see that all the ringtones were still on the card right where they should be and they would play from Astro when I clicked on them. But, the option to actually set them still wasn't there.
I'm not exactly sure what 'fixed' it, but I went in to set my notification tone and suddenly the option to select from the SD card was there. Then, I could then access the card to set ringers as well. I'm sorry I don't have anything more specific. The card just seemed to suddenly decide to let the OS know it was there. I also rebooted the phone a couple times as well as removing the card while the phone was in use and reinserting it. Not sure if any of that helped the situation or not.
I had asked about this in two separate threads and not one person responded, so I'm guessing the issue is rare.
If you don't get anywhere with it, maybe try a different SD card just to see if it shows up.
Good luck.
I've had the same issue but was able to resolve it. Mount the sd card from a laptop or PC. If you can read the card copy the contents onto the PC (I placed mine in a separate folder). Then go into tools and do an error checking. After replacing the SD card back in the phone see if everything is ok. this fixed my SD card. However, I've had the SD card lose its primary disk notation so I had to reformat and then transfer the previous save files on the SD card from my backup an that solved my other issue. Also, some times the SD card speed can cause this issue and it is perfered that you a class 4 or better. I hope this helps.
Well, I took your advice and pulled the sd card only to mount it separately and scan it for errors. None were found. I've also reformatted and restored all the files that were on it. Phone still does not recognize card or internal storage. My phone did, however, recognize another card I had on hand and I believe it may be a compatibility issue between my 8 Gb A-Data brand Micro SD card and 2.2 roms. FYI...It's a class 6, and the one I tried that was recognized was a 6gb sandisk (class 4). I'll look into getting a 16 or 32 gig sandisk in the near future and keep you posted. Thank you guys for your insight.
always 'safely remove hardware' (stop the device, etc.) from your windows machine before unplugging your incredible
if you don't, you end up not being able to see the SD card until you restart your phone
Just reformatted my SD card, checked for errors after unmounting etc... and now it seems to work ok, although one of the music players I normally use doesn't seem to recognise it!!

[Q] Epic 4g Microsdhc issue and One Click Root & Recovery v2.5.5

Hi,
Please forgive me if this is a noob question. I recently developed an issue transferring files to the sd card. Using the usb storage method, after transfering 2 or 3 mp3s, the phone would shut off and reboot for no reason (This caused the Zeam launcher to crash apparently? for at least 15 tries)
I tried using the SD adapter, the transfer rate is extremely slow or to no transfer at all and causes windows explorer to crash or hang (tried at least 15x).
I figured my sd card was corrupted so I tried formatting the card. If I used the SD adapter, it would say the card is write-protected even though clearly, the locked was off. I even tried another SD-adapter to no avail.
Finally, using USB storage, I was able to format the SD card.
Since I mentioned earlier that the Zeam launcher crashed, (yes, I selected always use "zeam launcher" even after it crashed causing the error message to loop) I resetted the phone with the wipe data/factory rest option in clockworkmod (I'm using ViperRom 3.03).
I wasn't sure if the 1 click root (http://forum.xda-developers.com/showthread.php?t=770388) installed any folders into the sd card so I ran the 1 click root in windows just to make sure. After rebooting from the 1 click root, all the files that were previously formatted were back.
I guess I didn't read too clearly but
my questions is
1) how am I able to disable that backup function? I had a bunch of files (which I have no idea what they did) from when i first started playing with the phone and I want to start off fresh with just the files I need.
2) anyone have any idea why the sd card was unable to accept files through the SD adapter or USB storage method?
3) what to do when the launcher crashes (this happened to me 2x already where I lost all my data)
Thanks to anyone who can help. This will help me close some gaps in my limited Android/Epic 4g knowledge.
definitely something is weird. Using usb storage, I ran the scandisk to fix errors and some errors were found. I formatted to ntfs just for kicks and the sd card read blank and in properties the drive had nothing in use. I turned off usb storage, turned it back on and voila, all the files that weren't there are now back. It this a sign of a corrupted sd card or am I going crazy?
Which files/folders are you referring to? Because as soon as your phone mounts your sd card, it will write about 4 folders (I think) if they are not already there...
.android_secure
Android
DCIM
LOST.DIR
if I recall correctly. The other thing you can do is use your phone to format your card instead of doing it on a computer... go to 'Settings->SD card and phone storage->Unmount SD card' then after it is unmounted, use the 'Format SD card' option. If this doesn't work, then you may need a new sd card/phone.

Categories

Resources