Hello.
My dad brought home a Qtek 9100 from work which he found in his new office. The phone had a cracked screen in it, so I had to change the screen in order to get it working. Apparantly the guy who was working in his office before had tried to fix the phone, because four of the screws were missing.
But when I turn the phone on, after the HTC and the Qtek screen, the phone asks for a four digit password. I have not inserted any sim cards. It seems like it's som kind of phone lock code or something.
I'm a total newb and I don't know anything about Qtek phones like flashing etc.
Is there any way of removing this password, or a way to find out what the code is?
Do a hard reset
find the device specific forum for the 9100 and figure it out using the wiki or something
DO NOT make a new thread until you've thoroughly searched
welcome to xda-devs
Related
I wonder whether someone could help me. My XDA exec is not detecting phone signals for a week or so. Phone menue and settings wont work and I am not able to search for network manually. Also the PDA working has become increasingly sluggish. On starting the screen it shows NO GSM at corner of the initial blue screen with bubbles. Soft and Hard reset didnt do anything. I have checked my sim in other phone, the sim is fine. Another thing is that device does not show the IMEI number
Can you help my
The gsm part of your phone is probably broken. I had the same problem and i had to send my phone in for service. They then changed the mainboard in the phone. I have since not dared to use the jasjar as it breaks to easely.
Hi, forgive me I have searched the net & am just confused with all the info out there & I dont seem to be getting anywhere fast please help.....
I have the MDA Vario 2 with T-Mobile. My son has changed the unlock code on the front screen when you first turn the device on, I have tried so many combinations he thinks he inputted & none of them work. How do I now unlock the phone?
I have tried the whole hard reset thing but am unclear on which buttons exactly to press as threads on the net just state 'Soft keys' :s
Really sorry if this is the wrong sub forum too.
**Cough**
Sorry for bumping my thread but I still havent got a clue....
the 2 softkeys below the screen and the reset button
Thankyou kingsizeriz, device now rebooted
Lost all my data but being a lucky chap I can restore most of it at work with my Sync cable. Again, many many thanks!
no problem - loss of data is better than a phone that cannot be used
ok, I am cleaning out the closet and have a pair of Dash's I want to sell off, got the unlock code from T-Mobile for one and am having the devil of a time trying to figure out what to do. The 'insert foreign sim card' ... well stuck in an ATT sim I have (worked FINE on the G1's I want to sell off) gave me the 'enter unlock code' screen, etc...
On the Dash(s), it just freezes up after then phone boots (hangs at the T-Mobile screen), take it out, boots fine (and gives me the 'you don't have a sim card' message. Put in a T-Mobile sim, boots fine.
What noob mistake am I making? (this is with the dead stock WM6 rom, freshly reflashed).
ilanad said:
ok, I am cleaning out the closet and have a pair of Dash's I want to sell off, got the unlock code from T-Mobile for one and am having the devil of a time trying to figure out what to do. The 'insert foreign sim card' ... well stuck in an ATT sim I have (worked FINE on the G1's I want to sell off) gave me the 'enter unlock code' screen, etc...
On the Dash(s), it just freezes up after then phone boots (hangs at the T-Mobile screen), take it out, boots fine (and gives me the 'you don't have a sim card' message. Put in a T-Mobile sim, boots fine.
What noob mistake am I making? (this is with the dead stock WM6 rom, freshly reflashed).
Click to expand...
Click to collapse
Try and flash a cooked WM 6.1 rom and see if the sim unlock screen pops up.
I tried with a 6.5, will give a 6.1 a shot.
nope, didn't work, tried stock wm6, and a 6.1. This is an ATT 3G sim, wonder if that's the problem.. .gonna see if I can find a wm5 and try that!
Any ideas? Anyone else?
Should work with 6.1, 6.5 has had the problem with not showing the unlock input screen, if you still have problems i would advise getting a different provider pay&go sim and trying....
That's what I'm thinking but it's a brand new sim, and worked on unlocking my two G1's
Maybe the Excalibur doesn't like it? Just try a different sim even if it's just a nick one if m8's for 1-2 mins
Problem is it's TWO Dash's acting the same way. Ran them all the way back to WM5 (stock), WM6, (stock), WM6.1 .. same thing... I did notice that as I powered them off (yes power button would still work) that the top bar would flash by for a sec and it was showing SIM LOCK, before it powered down. So I'm wondering if it's waiting for me to enter (yes tried to enter the code to the frozen screen, don't know what other buttons to push).
The same sim DID do the unlock for a pair of G1's that I'm gonna sell, and then just for giggles I went ahead and activated the ATT GoPhone that it came with successfully. Still the same thing when I tried to do the unlock.
I'm at my wits end... I'll just have to sell them with the unlock code with them or something.. I'm still wondering if it's the ATT 3G sim that the Dash dosen't like... need to dig about and find and old one or something.
I have a very big problem on my XDA IIs, i cannot unlock the phonelock even though i input the correct password.
-on my way home, my phone got emptied(battery empty). and then when i opened it, the problem began. please help me. what should i do?
-i have read articles stating that it is a common problem when the battery got emptied.
-my phone is an O2 xda IIs WM 6.5, serial 2.7.
-ty for the reply....
as i told you via pm already, there is no way to unlock the phone, once you set a password. the phone "forgets" the right password and would say, any password you put in, is wrong. that is why the only way to get rid of the problem is to re-flash the phone. a hard reset won't work, since that would be a terrible theft protection and also there is no way to backup any data, since even connected to the pc you are not given any access to the phone. that is why, in several threads here, and in several positions in my tutorial, i warn people, not to set a password in a cooked rom. you can do it in the stock wm2003 rom though, it works perfectly fine.
if you feel the need to protect your phone using a password, you need to look for 3rd party software to do that. i think spb has a nice app for that.
Hey guys, this is an extremely time-sensitive question!
I'm leaving the country in the next few days for about 5-weeks.
I did all the background necessary tasks ensuring my Telus-Branded HTC Desire will function properly while overseas.
I ordered my unlock code from MobileinCanada, I have purchased one from them before in the past aswell.
However, this time around, the unlock code doesn't seem to hold. It said that the device is unlocked successfully, however, I still cannot choose a network or make an outgoing call.
Rebooting the device simply asks me to put in the code again and the cycle then repeats.
I was wondering if it can possibly be ROM related? If I were to get off CM7 and head back to something more stock... would the phone unlock properly? Or is the problem in the code I was given?
Thank you SO VERY MUCH!
Search for a topic called similar unlock utility. Its in one of the Desire forums. If that works, get your money back.
Sent from CM7
Get your money back and try the program at the link below.
http://forum.xda-developers.com/showthread.php?t=943726&page=59