Ill try again then .. Can I somehow reset or reflash the BA from bootloader? 'Cause I can't hard reset the ppc and i cant boot it. It freezes at boot screen and when i hard reset it freezes at the white screen..
HEELP!
Spixe
You cannot do Hard Reset without... Hard resetting the device.
You can flash new ROM and make no Hard Reset, but it doesn't guarantee you will be able to boot BA, as registry stays untouched and may still prevent BA from booting. Moreover, if you use different ROM, additional problems may push the problem further.
Flashing in bootloader is... standard method of flashing. You can use SD card method or USB. You cannot flash the deivce when it is booted in windows, so I see no problem there.
What puzzles me is "white screen" on hard reset: if indeed this is an HR (how do you initiate it?) even after flashing different ROM, this might be just hardware error and all you can do is to say bye bye to your BA.
jakubd said:
You cannot do Hard Reset without... Hard resetting the device.
You can flash new ROM and make no Hard Reset, but it doesn't guarantee you will be able to boot BA, as registry stays untouched and may still prevent BA from booting. Moreover, if you use different ROM, additional problems may push the problem further.
Flashing in bootloader is... standard method of flashing. You can use SD card method or USB. You cannot flash the deivce when it is booted in windows, so I see no problem there.
What puzzles me is "white screen" on hard reset: if indeed this is an HR (how do you initiate it?) even after flashing different ROM, this might be just hardware error and all you can do is to say bye bye to your BA.
Click to expand...
Click to collapse
After ive selected the settings in debugger screen that resets and then pushed the mail button, the white screen shows up. And it stays.
Ive tried to flash it, but in the guide it said that i should hard reset. It wouldnt boot after the flash, so i thought that it was a "must" the HR (Hard Reset i assume). How do i flash it in another way? I follewed the Wiki guide.
Spixe (and sorry for my english. Not perfect - I know )
Related
Ouch!!!!!
I tried the radio update, during which I got a communication error.
Now I have a brick!
The blue i-mate screen comes up. the rom info is displayed (radio still says 1.03.00) and there it is stuck.
Now what? Hard reset? (how do you hard reset from that point?)
Bootloader? How is that done?
Please help. I am off to go under my blanket to cry.
Just retry the radio update again and again, put it in bootloader
How do I get bootloader? I tried the camera+power+reset combination but it still does the same thing, no bootloader menu.
Or do I have to have the bootloader files in the storage card first?
Can I also get help on how to extract the files. I don't know where the installer is putting the binaries, and at this point I would very much prefer not guessing what files to put where.
bootloader
try this
light + power + reset
Re: bootloader
dherrero said:
try this
light + power + reset
Click to expand...
Click to collapse
That did something. Now I have a white screen (no light) that says "Serial" on top and "v 0. 60" at the bottom.
I have the following files in the sd:
EnterBL.exe
GetServiceData.exe
radio_.nbf
RUU.conf
RUU.dll
UI.dll
But it is not doing anything.
yes, now it's in bootloader. Now connect the jasjar to your pc and execute the upgrade. If it doesnt work kill the activesync processes (WCESMgr.exe and wcescomm.exe) and repeat the upgrade
OK! That seemed to work, but it still gets stuck at the bootup screen (except now it shows the new radio version).
The update program asks for a hard reset, but others in another thread mentioned they did not need a hard reset after this update.
Is there something else I can try before trying a hard reset?
I just spent a week to set the damned thing to the way I like, and don't want to do all that again.
I didnt hard reset. try resetting 2 or 3 times. If it doesnt work then hard reset
I took out the battery. Will wait a bit and try resetting a few times.
How long does it take for yours to show some activity after the rom versions are displayed?
It does take longer for this device to bootup, but I wonder if the new rom made a difference there.
Usually the blue boot screen disappears in 30 seconds. But when i installed pocket plus many times it keeped freezed and a had to reset 3 o 4 times.
Is your case?
dherrero said:
Usually the blue boot screen disappears in 30 seconds. But when i installed pocket plus many times it keeped freezed and a had to reset 3 o 4 times.
Click to expand...
Click to collapse
Hmm. I don't have pocket plus, but I have the spb gprs monitor (or whatever it is called) at the startup. Maybe that's causing a problem with the new radio.
I will reset 3 - 4 more times and then do a hard reset.
If it does not come back from hard reset, the bawling you hear all the way out there is me.
he he . I ve spb gprs monitor too and it works fine.
good luck :wink:
When perform soft reset, wait 1 or 2 minutes before doing other soft reset
OK, now it is time to cry.
It is not coming back from hard reset either.
It is officially a brick. Any more ideas? Please?
thy to make the update again. Perhaps this revives it
if a radio update is available, maybe a rom update is around the corner.
Or just a recovery standard rom
Does exits an official rom to reinstall jasjar rom?
I am doing the radio update again to see if that helps.
I will probably need to contact imate support for a recovery rom image I suppose. I suppose I should tell them what I was doing.
But this update was from imate, right, so I didn't do anything "wrong".
If someone has a rom, please let me know.
So, I am getting the runaround.
iMate says they don't have the rom to send me and I should send the device to the service center. The service center says they don't work on JasJars there.
So I am stuck with a paperweight?
Try Hard reset....
Just try to Hard reset .. most probably one of your already installed S/W causes the machine to hangup.... once you clear after Hard reset it should boot up.. worse while before sending it back to imate and being blamed for loading un-official and not released update... Unfortunatly there no "shipped rom" yet. you best choice to recover the paper weight is to hard reset and perhaps load S/W again. ... I have been trying to dump the rom for days with no success .. once one of us can do it we are releaseed.
Good luck
Re: Try Hard reset....
Dubi said:
Just try to Hard reset .. Good luck
Click to expand...
Click to collapse
Already did the hard reset (many times) and nothing changed.
The problem started after the radio update, and the hard reset does not reset that update (I see the new version on startup).
Unless there is a harder reset I can do, I suppose I will have to wait for the rom.
makes a grown man cry...
Hi all
I have a problem, my mda vario compact III wont start,
when i start it, i see t-mobile screen and thats it. I wait for a long time, the same, just t-mobile screen. I tried to hard reset the phone, it worked, the resetting, but still the same problem. Then i tried to get into boot mode, i it worked, i saw a few different colour screen, with the version number. Then i tried to sync it with usb cable, it detects and installs, but active sync doesnt work. There is no memory card in my artemis, i guess thats not a problem.
Does someone know how to reflash or make this problem ? i would appreciate it,i
i did nothing with it, it went just like this, before a installed a game on it, it froze for a while, and then i didnt use it, and the next day using it, it reacted strange,
grtz
zarba
maybe the professionals can help you out,
are you sure you did a hard reset and not simply a soft reset while pressing additional buttons? i dont want to embarass you, but you wouldnt be the first who thinks he did a hard reset. was there a question about losing all data and that you should press the green dial button?
if a hard reset doesnt work, you could try to flash a different rom using either usb connection or sdcard. just search in this forum or here or here to find how to flash. if you use a non-orignial rom, dont forget to use uspl before you flash the rom.
I switched on my phone today, and it loaded the o2 screen, and now is permanently stuck on the Black and Blue screen.
I using Tom's B&B 4.0 touch-flo rom.
Please help!
try a hard reset, something similar happened to me when i was using a different rom and a hard reset fixed it, hope that helps.
Hard reset is when you push call and end buttons together and insert the stylus?
Didnt work either.
hmm.. maybe reinstall the rom then? Did you install any programs on the phone??
It's not detecting the fone, hence I cant even reinstall the ROM.
Is there any way 2 recover from this? Or did I just loose 700 bucks!?
Even problem whereas I had any concern with this version v4.0…
I flashé my artemis 4 or 5 times, it went super… (I would have of the Juste to make hardware reset…).
Since my 2 last flash, that blocks on the page during more 5min…
Flash after flash, always similar
http://forum.xda-developers.com/showthread.php?p=1445305&posted=1#post1445305
So wait, were you able to fix it?
As of right now my fone is sitting like a brick on my table.
Me I wait, of the blow I do not make more software reset…
I am obliged to await more 5min before being able to type my code PIN.
I do not include/understand, that had ever done it to me before this last flash.
I have remakes a flash, always similar, even while passing by a ROM Orange, as soon as I pass by again in V4.0, that does it to me!!!!
Its been over 5 mins for me and its still stuck on the B&B screen. HELP!
Make a hard reset and change the ROM....v3.7 for exemple...
Yea, I tried reflashing it, but the Rom update utility doesnt detect the fone at all.
Look this :
http://www.forummobiles.com/index.php?showtopic=139079
It's a french but it's easy with photo !
I read it, but because it never passes the boot screen, it never detects it hence it doesnt show up in the device manager.
What 2 do!?
Try hard reset again. What did you mean when you said it doesn't work? It didn't do anything? It tried re-installing and failed? What happened?
You don't need the ROM update utility to do a hard reset.
B&B 4.0 Getting stuck on the windows loader, is a know problem. TRy a hard reset to fix it.
Hard reset: Stylus in the hole on the side, and press the two " - " buttons between the red and green button.
This should fix the problem. Now you can flash another rom into the P3300. I'm, running 3.4 without any problem. I updated it with the HTC Tabs from Tom wich used in B&B 4.0.
The problem is that V4.0 functioned very well on my first flash…
while reinstalling the plug in HTC Home + the file SDK, that is better!!
Normal :
http://forum.xda-developers.com/attachment.php?attachmentid=47324&d=1187262723
Color :
http://forum.xda-developers.com/attachment.php?attachmentid=47329&d=1187264616
File SDK :
http://forum.xda-developers.com/attachment.php?attachmentid=47339&d=1187272601
I may come back, for now my Artemis is sitting, bricked, on my table and I've tried everything.
Someone please tell me what I'm doing wrong?
You need to flash via bootloader - hold record button down and soft reset - you now have multicolored screen - connect via usb and flash - you dont need activesync this way.
Hi,
tried to flash my Hx2110 with KU3_52_hx2000FIXed_by_kozhura.rar rom.
The flash completed but after that the pda stopped working, it dont even power on.
Nothing just a black screen, tried to hard reset, and to enter in bootloader mode, nothing.
The only sign of life is when I perform a hard rest it emmits a beep, otherwise nothing.
Is there still any chance to save it?
Thank You.
nkwai said:
Hi,
tried to flash my Hx2110 with KU3_52_hx2000FIXed_by_kozhura.rar rom.
The flash completed but after that the pda stopped working, it dont even power on.
Nothing just a black screen, tried to hard reset, and to enter in bootloader mode, nothing.
The only sign of life is when I perform a hard rest it emmits a beep, otherwise nothing.
Is there still any chance to save it?
Thank You.
Click to expand...
Click to collapse
Yes, it can be saved, but you need another Ipaq to do it. Furthermore, that ROM is faulty, as I used it and bricked my Ipaq as well. I repaired it using another device. I will post the fix for you later. Just one more question, can you get into pre-BL mode? and, was your battery fully charged?
Let me know
I've entered email account settings.
I've entered my wifi settings.
When I have a soft reset all settings are forgotten.
Sometimes upon a reboot it takes quite a while to connect the radio.
its happening something weird to me like, not having signal very often and im afraid to flash a radio stack... cause is the first reason of bricking hermes.
I have flashed radio many times and it's always been ok
I think I may have a bad self made rom?
It is now stuck on the splash screen
I want it to boot so I can save a weeks worth of messages,then I'll flash a better rom.
Any other way to get past splash screen other than hard reset?
mmm ok i will try to upgrade the radio stack
the only way to go out of there is.... hard reset
or.... flash another rom
MystaMagoo said:
I have flashed radio many times and it's always been ok
I think I may have a bad self made rom?
It is now stuck on the splash screen
I want it to boot so I can save a weeks worth of messages,then I'll flash a better rom.
Any other way to get past splash screen other than hard reset?
Click to expand...
Click to collapse
Try to see if you can connect it to your pc and sync your messages. if that doesnt work, I think you will have to hard reset it
Bit the bullet and just flashed a new rom.
Thanks for your helps Guys