Hi all.
I just bought my XDA IIs some days ago in HongKong.
I´ve tried to update it with the new rom from the "sourceO2" page ... the update started and then an error occured... ???
Now I can only see " USB " (when the device is placed in the sync station) or " Serial " (when it´s not) at the upper part of the screen ...
... and " V 2.07 " at the lower part.
What can I do to use my XDA again ???
Please HELP ME!
Thanks in advance!
Joern :shock:
...
by the way ... Of course I don´t have a backup :-(
If you plug it into your cradle, while activesync won't connect, your phone is still connected with your PC. So you can still update the rom through the rom installer.
So I suggest you find another rom and upgrade it, or try the same one again (in hopes something just went wrong during flashing).
First of all thank you for your prompt reply!
I´ve downloaded several ROM´s already ... But I always get the "wrong country ID" message!
Any other tips?
Same Probelm
I got the exactly the same problem with you. Hope someone can help us!
Ken
Or maybe anyone knows where to get the original ROM for my HongKong XDAIIs ?? There were some links in old posts.. But they don´t work anymore :-(
Unless anyone can find the Country ID of your XDAIIs (which you can no longer check because your device is inoperable), I'm at a loss.
POssibilities I've found are:
O2ASI001
O2___001
So all I can suggest is you try the suggestions here with the above (or if you find it, the correct) country IDs and the O2 Roms you have been trying:
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
Sorry I couldn't be any actual help .
HK CHT ?
I have tried to download the file xda2sHKcht.zip on this site in order to try but after I downloaded it, it said that the zip file is corrupted.
where´d you get it? :?:
the download site
on the site "ftp.xda-developers.com/BlueAngel/xda2sHKcht.zip"
user name : xda
password : xda
you can try it and post a response to me to see if it works for you
try my trick with original update from qtek.nu
First download the the file from this link below.
http://www.qtek.nu/files/BA_WWE_BP_12200_169_10602_SHIP.zip
Then extract the zipfile.
After ectracting you get an exe file.
Extract this file also.
Then you get ruu.conf and the other setup files.
edit ruu.conf and add 1 line to it
[CHECKCEID_TYPE]=1
then save ruu.conf
after this start baupgrade.exe.
Hope it works but it only helps with country id error so if device is
differend then we need to do something else.
good luck
Oh if you get error tell me the 5 2digit nrs that appear, i can get device data from baupgrade.exe
There is a table with nrs and providers in it
Thank you for your reply!
I will try that out now. Will inform you what happend!
thanks a lot.
Joern
! ! ! ! ! ! ! ! THANK YOU ! ! ! ! ! ! ! !
IT WORKED!
VASTLOPER - THANK YOU SO MUCH for your TRICK!!
All the others who replied - THANK YOU, too!
KENJAVA - Try that! It worked really perfectly. Even with the newest Upgrade from the O2 page!
The only thing I don´t like about the O2 upgrade is the LOGO next to the start-button, since I´m using T-Mobile and since It´s always in the front and bugging me ;-) ... Anything I can do against it???
Have a nice week!
Joern
Glad it's back alive now.
You can edit some files in the extended rom to remove the logo and the default o2 settings but you must wait till i am home again so i can look it up.
vastloper (naam pas wel bij dit topic ) Denk je dat ik op deze manier ook mijn XDA2s (uit Maleisie) kan updaten?
I think it will as long as it is a PH20B device.
If you ask questions in dutch to me do that in PM please.
People like to be able to understand what is written here so we try to write in english.
vastloper said:
I think it will as long as it is a PH20B device.
If you ask questions in dutch to me do that in PM please.
People like to be able to understand what is written here so we try to write in english.
Click to expand...
Click to collapse
Vastloper. Thanks for the info. Yes it's a PH20B unit.
Sorry about the Dutch.. It's a bad habit.
Here is the question in English: vastloper (name fits to this topic*) Do you also think that I can update my XDA2s (from Malaysia) this way?
* vastloper translated to English means "seize up".
Many people ask me what my name means in english.
Thanks for the translation.
how to edit files in the extended rom ?? :roll:
First unlock extended rom and unhide extended rom with tool found elsewhere on this forum.
You can find it on the ftp under extended rom kitchen in folder tools.
After unlocking you need to reboot the device.
Remove the lines that have to do with O2 in the file config.txt
After changing config.txt you need to mak hard reset.
Good luck.
hi everybody ,great web site by the way.
Im really new in this ,I got my phone from O2 few days ago shipped from Germany but the problem is it's all in german so i don't know how to switch it to english .I tried this web site http://www.my-xda.com/xdaminis_soft3rom.html but this utility didn't work I get this screenfirst :image version 1.3.4.2 to image version 1.5.4.2
than after it get's connected it gives me this message :
Error [294] :Invalid Vender Id
This update utility cannot be used for your PDA.please check your Update utility.
Can please someone help me ?
~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!
HTC01X said:
~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!
Click to expand...
Click to collapse
Please provide more information about your device, such as:
Bootloader type (SPL): You will see this when you enter the bootloader
Did flash finish correctly (eg. 100%)
Do you see tri color screen (Bootloader), or your device froze at Windows splash screen?
Add some more technical info and I am sure somebody can help you, but frankly I have no idea what error 294 is.
HTC01X said:
~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!
Click to expand...
Click to collapse
I'm not a tech guru like many on this forum - so I can't really help too much. BUT, I have found the error codes which seem to indicate that error 294 is an invalid vendor ID which suggests that you aren't super CID, aren't using olipro hardSPL or DES to flash with and are trying to flash a ROM which requires a vendor ID.
This is the link I got this info from and I hope someone else can be more helpful.
http://forum.xda-developers.com/showthread.php?p=1177823&highlight=error+codes#post1177823
Good luck...
hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year
Dude, you should use search function!
There are many link to Error 246
I suggest read this:
www.trinityguides.info
Here you can find everything. Error 246 too...
This is the rom flash Bible by racer_x!
Jeanxito said:
hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year
Click to expand...
Click to collapse
From reading the above - I don't believe that the 246 error is your problem. (The 246 error is due to the Rom Upgrade Utility not waiting for the trinity to reconnect in bootloader mode - as soon as the connection is lost you get that. as you have seen, by restarting the RUU - or only starting the RUU when the phone is manually in bootloader mode - you can get the ROM loaded.)
I believe your problem is the stuck at 1% trying to flash the dopod ROM.
My 2 cents: forget the DOPOD ROM - it really is not as good as the cooked ROMs - in this case - "official" is not better.
The 1% sticking problem is a problem with this ROM.
Download another ROM (which one is not an easy question - but I have heard good things about sammy_deluxe ROM if you're looking for a portuguese ROM) and try updating with another ROM. it will work. Patience!
Happy new year to you too
hello everyone please helllpppp! my p3300 was flashed to espnyol wm5 rom(telefonica) and now very time i try to flash to a defrent rom its stuck on the 3% and then its stoped and on the computer its apirs "image corrupted" and i 100% sure that the image is good,please help me,i try to do hard reset it doesnt work,please help me save my p3300 and upgrade it!waiting to your help,ira.
...
forum.xda-developers.com/showthread.php?t=701983
...
you need to do Uspl - 1.11.cmon
click link supplied above to find out how to do it..
click link bellow for ''p3300 free apps'' and Uspl-1.11cmon is there..