Checksum Error WinCE Upgrade - Upgrading, Modifying and Unlocking

Magellan roadmate 2200T
In Boot Loader - Win CE Upgrade - Wince by SD
I get checksum error
I have tried several cards, a 32MB card, formatted to FAT, with the files winceimg.bin and winceimg.cks, the checksum is found with Winhex compute hash - 32bit CRC, winceimg is from Magellan2200T_or_Crossover_2_14 update, I have tried other bins, also get checksum error, or if passes checksum I get invalid image message
I have also tried doing by USB with dnw.exe with secbulk driver, pc recongnizes GPS and get USB status, but file would not transfer.
I have another unit I can copy from but grabit and other like tools do not seem to copy the whole image.
Trying to boot off SD Card I get open file failed! Put image file into SD! What files do you need to do boot off SD bin upgrade?
I have sucessfully did uboot update from SD using uboot.bin from Magellan2200T_or_Crossover_2_14 update. It changed the whole way the bootloader menu works. I have a 2200T with rest button, not switch. Before uboot update you use reset to navigate menu, after this update I have to use the hold button. To turn the unit on power button does not work, have to press hold button and power button.

Related

Problems with MDA PW10A2 (unlocking) / bad rom flash

I followed instructions (http://forum.xda-developers.com/show....php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
I need to flash rom from my sd card I concluded......how to do that?
http://wiki.xda-developers.com/index.php?pagename=Wallaby
wiki knows all
How to Flash your Device using bootloader and SD-Card....
Download XDATools
Extract them at any place and run osimagetool
Select your Rom Image from the Source drop down menu.
Select your SD card (disk drive) from Destination the drop down menu.
Select Copy to start writing process and the tool should start writing to the card.
When XDATools has finished writing the image (no Infomessage) put the SD-card into your device
If there comes a message to format the SD-card select No
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
I understand all...but where am I going to find rom image????
I donthave it, I have this Pocket PC few years, don remember if I got anything with them back then?!
Anyone has rom image that I need or know where I can get it?

Flashed New Official Rom but bricked (2.03.456.2) [Release Date: 2009-01-16]

Hi,
I download the new rom from http://www.htc.com/www/SupportDownload.aspx?p_id=133&cat=2&dl_id=483 but after upgrading rom the utility says:
Code:
ERROR [270]: UPDATE EROR.
The image file is corrupted. Please check your Update Utility.
I re-download couple of times and re-upgrade but always the same...
The 4 Coloured screen has some text on it:
Code:
DIAM100 64M
SPL-1.93.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
Before the new official rom i have another cooked rom as you can see i have Olinex Hard-SPL...
Can someone help me about this? I have bootloader screen (4 coloured screen) but after trying times and times always the same. After completing the %100 the error occurs...
Code:
ERROR [270]: UPDATE EROR.
The image file is corrupted. Please check your Update Utility.
Thanks for your helps...
flash another rom or radio from your pc with usb when in bootloader
Blazeitup123 said:
flash another rom or radio from your pc with usb when in bootloader
Click to expand...
Click to collapse
I have the same problem after update new fw.
I can downgrade to 1.93xx, but the new fw doesn't work.
Many people were having this problem , and it was answered a lot of times , is faster to search/read than making a new topic and waiting answers .. just my opinion , anyway here is your answer .
To avoid the 270 error , that 2.03 official wwe gives at the time follow this flashing method:
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
More here :
http://forum.xda-developers.com/showpost.php?p=2707841&postcount=4035
OK. May I ask what to do AFTER I am receiving the error? Unfortunately I didn't read this post above BEFORE trying to update. Now the phone is stuck in bootloader mode and I don't know how to copy the .nbh file to it's internal memory since that memory is not accesible from PC. Should I try to update to a previous firmware, make de steps above ad retry?
Later Edit: I did it as I said before. Flashed another ROM (that went OK), now I'm copying the DIAMIMG.NBH on the Internal Memory and try as described above. Hope this time is working.
Later Edit 2: The update succeded, now the phone is setting up. Thank you. Though, I'm wondering if there was another metod of copying the NBH file without flashing another ROM
I have the same problem with a Windows Vista, i install the same rom update with Windows XP and works
I fixed this problem yesterday!
Hello all,
i decided to update, as all of us and i got the 270 EROR
So i was stuck and the device was not responding.
What i did was to switch it off by taking the batery out...
When i started it again i got the same preloader colour screen. I hoocked it on the USB cable again and started the update yet again.
Everithing was perfect this time, so i suggest you do the same as i did.
btw, i think its working slower now...
best regards

HELP!!!

I'm trying to change the language of my diamond... I allready ran the hard-spl, but when I try to flash other rom it "freezes" in 0%...
Can anybody help me?
rspcorreia said:
I'm trying to change the language of my diamond... I allready ran the hard-spl, but when I try to flash other rom it "freezes" in 0%...
Can anybody help me?
Click to expand...
Click to collapse
try flashing from internal storage
Try this link, might work.
TRY THIS FIRST........as per cyron_at, and my recommendation. Here are the instructions...
Internal Method of flashing Radio or ROM
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
I can't find the file you mention in your reply...
What file are you using?
When you download a rom or a radio the file is always a .nbh file. Put that file and that file only in your Internal Storage (4GB). Not in a folder or anything but in the root of the storage and rename it DIAMING.nbh.
THen follow the instructions in my last post...

My Axim X50 is no load after new ROM upgrade

Axim X50 Mid - Change rom WM5 02 to WM6.1
1) Unpack files from archive into root of FAT32 SD-Card.
WM50_K_A04_X50_WM61_ENG_nb0.crc + WM50_K_A04_X50_WM61_ENG.nb0
2) Insert the SD-Card into your Axim and start the SD Image Loader by Pressing Wireless + Power + Reset
3) The Image Loader will search for flash images on your SD-Card.
4) Press the action key twice, this starts the update process.
5) After the process is finished you will be asked to hard reset your device. Follow this instruction and wait for the OS to load.
Click to expand...
Click to collapse
Ugrade writte screen: image update fail (-1)
Restart Axim boot screen logo DEll freeze 80%
Power + Reset: Screen: To restore factory settings press CONTACT. To cancel this operation, press POST. Note: All existing data is lost when you restore factory settings.
key:
CONTACT - power off DELL
POST - boot screen logo DEll freeze 80%
Wifi + Power + Reset:
1. screen: SD Image Update A02
2. screen: loading - Image Updating - Reading SD card
3. screen: loading - Image Updating - Image Writting Flash
4. screen: loading - Image Updating - Erasing storage... > screen: image update fail (-1)
To same ROM X50_mid_WM5_A02
Actual freeze: Erasing storage... > image update fail (-1)
Please help me

[Q] Artemis without ROM

My P3300 is without a rom. I had problems previously and had to install the original rom via bootloader mode. It worked for a while then began to freeze and automatically restart at times. tried to upgrade the rom to a different version but was not successful. it gave me the restore mode but was also not successful. Now my phone is without a rom and i cannot install any rom to it as well. it gives me Invalid vendor id error or corrupt image for all the previous working roms i tried. it begins the update then the phone reboots at 2%. need help desperately.
You can try to flash your device with the SD_Card Flash method look for it here:
http://forum.xda-developers.com/wiki/index.php?title=Artemis_SD_Card_Flashing
1. Download the original rom for your device that was installed at the beginnig you bought the device with.
2. Extract all the contents of the installer file (winrar or a similar prog.)
3. navigate to the extracted original rom (RUU_signed.nbh)
4. Rename the file to ARTEIMG.nbh and put it in the root of your storage card
5. put the card back in to your device and hold down the voice button after you press the power button.
6. Now your bootloader should show up and check for the ARTEIMG.nbh on your storage card.
7. Slide down the volume button and it should begin to flash your device.
8. After flashing process is finished. Power device off and do a hard reset.
If your device is working again and you need further help for unlocking your device (Super-CID) to flash custom roms pm me or post in this topic.

Categories

Resources