I'm trying to change the language of my diamond... I allready ran the hard-spl, but when I try to flash other rom it "freezes" in 0%...
Can anybody help me?
rspcorreia said:
I'm trying to change the language of my diamond... I allready ran the hard-spl, but when I try to flash other rom it "freezes" in 0%...
Can anybody help me?
Click to expand...
Click to collapse
try flashing from internal storage
Try this link, might work.
TRY THIS FIRST........as per cyron_at, and my recommendation. Here are the instructions...
Internal Method of flashing Radio or ROM
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
I can't find the file you mention in your reply...
What file are you using?
When you download a rom or a radio the file is always a .nbh file. Put that file and that file only in your Internal Storage (4GB). Not in a folder or anything but in the root of the storage and rename it DIAMING.nbh.
THen follow the instructions in my last post...
Related
I followed instructions (http://forum.xda-developers.com/show....php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
I need to flash rom from my sd card I concluded......how to do that?
http://wiki.xda-developers.com/index.php?pagename=Wallaby
wiki knows all
How to Flash your Device using bootloader and SD-Card....
Download XDATools
Extract them at any place and run osimagetool
Select your Rom Image from the Source drop down menu.
Select your SD card (disk drive) from Destination the drop down menu.
Select Copy to start writing process and the tool should start writing to the card.
When XDATools has finished writing the image (no Infomessage) put the SD-card into your device
If there comes a message to format the SD-card select No
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
I understand all...but where am I going to find rom image????
I donthave it, I have this Pocket PC few years, don remember if I got anything with them back then?!
Anyone has rom image that I need or know where I can get it?
I'm seeing some very strange behaviour with my Diamond when I flash from the Internal Storage. It worked fine for quite a few flashes, but I tried to flash yesterday and despite copying the Diamimg.nbh file to the internal storage, reflashing went back to the ROM that was previously installed not the new one!
I can reflash from my PC successfully, but trying to do it from the internal storage doesn't work.
Has anyone had this problem before? Is there a fix?
Never had a problem flashing from Internal Method.
Are u sure u followed all the steps including a hard reset right the installation?
Internal Method Steps:
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Try this again.........& let me know how it goes
Just realised that I've been being a little thick and pressing the vol down and 'select' button. I'm off to go and have a quiet word with myself!
Doh!
Thanks.
Paveway98 said:
Just realised that I've been being a little thick and pressing the vol down and 'select' button. I'm off to go and have a quiet word with myself!
Doh!
Thanks.
Click to expand...
Click to collapse
No problem.......I'm glad that u found the bo bo.....
job done
thread closed
Meaning move the radio to internal storage and rename it to DIAMIMG.nbh?
Yes sir you can.
Also splash screens.
Great, thanks.
Yes and it's the best method....
Here are the steps from suiller:
COOKING ROMs & Radios from phone =-
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Skip step 8 for Radios
Hi,
I download the new rom from http://www.htc.com/www/SupportDownload.aspx?p_id=133&cat=2&dl_id=483 but after upgrading rom the utility says:
Code:
ERROR [270]: UPDATE EROR.
The image file is corrupted. Please check your Update Utility.
I re-download couple of times and re-upgrade but always the same...
The 4 Coloured screen has some text on it:
Code:
DIAM100 64M
SPL-1.93.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
Before the new official rom i have another cooked rom as you can see i have Olinex Hard-SPL...
Can someone help me about this? I have bootloader screen (4 coloured screen) but after trying times and times always the same. After completing the %100 the error occurs...
Code:
ERROR [270]: UPDATE EROR.
The image file is corrupted. Please check your Update Utility.
Thanks for your helps...
flash another rom or radio from your pc with usb when in bootloader
Blazeitup123 said:
flash another rom or radio from your pc with usb when in bootloader
Click to expand...
Click to collapse
I have the same problem after update new fw.
I can downgrade to 1.93xx, but the new fw doesn't work.
Many people were having this problem , and it was answered a lot of times , is faster to search/read than making a new topic and waiting answers .. just my opinion , anyway here is your answer .
To avoid the 270 error , that 2.03 official wwe gives at the time follow this flashing method:
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
More here :
http://forum.xda-developers.com/showpost.php?p=2707841&postcount=4035
OK. May I ask what to do AFTER I am receiving the error? Unfortunately I didn't read this post above BEFORE trying to update. Now the phone is stuck in bootloader mode and I don't know how to copy the .nbh file to it's internal memory since that memory is not accesible from PC. Should I try to update to a previous firmware, make de steps above ad retry?
Later Edit: I did it as I said before. Flashed another ROM (that went OK), now I'm copying the DIAMIMG.NBH on the Internal Memory and try as described above. Hope this time is working.
Later Edit 2: The update succeded, now the phone is setting up. Thank you. Though, I'm wondering if there was another metod of copying the NBH file without flashing another ROM
I have the same problem with a Windows Vista, i install the same rom update with Windows XP and works
I fixed this problem yesterday!
Hello all,
i decided to update, as all of us and i got the 270 EROR
So i was stuck and the device was not responding.
What i did was to switch it off by taking the batery out...
When i started it again i got the same preloader colour screen. I hoocked it on the USB cable again and started the update yet again.
Everithing was perfect this time, so i suggest you do the same as i did.
btw, i think its working slower now...
best regards
Hi all
I am trying ot load a custom rom on my Diamond using the CustomRUU.exe. But when it is trying to flash it stucks at 0%. Eventually there is a time out error. My Phone starts normally after btw.
So what I tried next was updating my phone to the latest official rom. This worked perfect.
Next I tried to flash the custom rom again (A.Z.T.O.R. and udK Syrius HD R0) and it didnt work (stuck at 0%)
please help! I really want the A.Z.T.O.R. rom to work!
Greets,
DarkGJ
The Sticky Threads are there to read them before posting .....
HardSPL?
Look for the internal method to update your ROM...
But first install RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
This must be the 56 time the same question is asked nobody try to read any more nowerdays (start with the sticky ones?)??
Read this http://forum.xda-developers.com/showthread.php?t=409425
Thanks a lot, i have read the sticky's but Surfkings post makes it clear thanks
Well when trying to flash the spl rom I have the exact same problem... stuck at 0%
Disable all antivirus-prgs and firewall and try again
I Worked it out, Thanks a lot for the help!
Greets
DarkGJ