I have to press it extremely hard for it to do anything.
Does anyone know what i could to do to fix it?
That might be an after effect of the whole water damage issue you recently had. Things might possibly be going down hill for you from here.
Did you ever take the phone apart to let it dry as I mentioned in your other thread?
Sounds to me like condensation has now worked into the keypad and is beginning to tarnish the contacts on the keypad.
Unless you have the ability to work on electronics, it may be time to get a new phone.
You could use AE Button Plus to remap the up button to a double tap or long press on a different key like a soft key or down key.
Assuming you are speaking of a Dash and are brave the Service Manual may come in handy. Link removed - no longer valid
I did let it dry for 2 days or so.
Didn't open it because i don't have the tools and the person before me who tried to open it did nothing but destroy the bolts, so it would be even harder.
You guys still think there might be some water in there? There was condensation in the lens for the camera, but after i put it in a bag or rice with constant heat it left pretty fast. And then it was in there for another day and a half maybe.
Related
So i go my device about 3 weeks ago. last night i noticed the volume down button wasn't working, so i took off the battery cover and this is what i've found.
Theres a plastic piece that goes over the button and looks like the one for volume down as slid into the device, the volume up & PTT button's plastic cover looks to be going loose as well.. :/
I know i can take it into the device support center but they'll probably give me a refurbished device which i dont want. I payed for a new device, its fairly new and i should get a new device!
Anyone else experienced this?
ouch. it looks like your other buttons are a little broken too. how hard are you pressing those? ive had my tilt 2 for a month and a half and the buttons are still perfectly aligned and feel brand new.
Looking at my case and the vol/ptt buttons inside it doesn't even look like it'd be possible to push hard enough on the outside to cause that. However all three buttons do have the same internal plastic piece which is probably why the other buttons are going.
If you're under 30 days can't you return the device? I thought AT&T had a 30 day return period.
My volume buttons didn't break off like yours, but they did lose tactile feedback after a while. That is, when I press it, it doesn't click and bounce back as strong as before. They felt dull when I press them.
So what I did was put layers of scotch tape against the inside of the back cover where it would come in contact with the volume buttons. (Not sure if I explained it properly). Now my buttons work beautifully again.
If others are having this problem, please let me know. I can post some pics so that you can try.
ohyeahar said:
My volume buttons didn't break off like yours, but they did lose tactile feedback after a while. That is, when I press it, it doesn't click and bounce back as strong as before. They felt dull when I press them.
So what I did was put layers of scotch tape against the inside of the back cover where it would come in contact with the volume buttons. (Not sure if I explained it properly). Now my buttons work beautifully again.
If others are having this problem, please let me know. I can post some pics so that you can try.
Click to expand...
Click to collapse
I'm having that with mine right now actually, just started noticing it in the past week. I'll give your trick a shot, thanks!
so i got pretty drunk last night (almost like every night but thats a different story ) and i remember dropping my phone on the pavement. And just now i noticed the volume down button has fixed itself from the drop! haha
i tried manually moving the cover piece back over the button when it first broke and that didn't help. so i guess the solution is to drop your phone!
the desire owners will have noticed, that when you press the on/off button, the screen turns on and you will see the slider (with the time and date).
(unless you replaced it with an app or something).
now you can choose how to unlock it, either slide the slider down with your finger.
OR you press the menu button.
i have the desire in my pocket with the screen towards my leg (because it's more comfortable deu to the little curve on the bottom), and i KEEP pressing the f#####ng menu key.
in other words: my phone gets unlocked every couple of minutes.
my mates think its cool, because i'm calling the whole wide world from my pocket without using my hands or fingers.
but i don't like it, neither does my wallet.
i know there are unlock apps, but i'm not always sure what they do.
i'm looking for a hack/app that disables the menu key.
in that way the single and only way to unlock the phone is to slide the slider down with my finger.
so nothing will change EXCEPT the fact that the menu key can unlock the screen.
can someone please help me, because i'm really getting sick of it (even though the phone itself is absolute gold).
p.s. i'm not familair with rooting.
so you're pressing the power button, then the menu button in your pocket? how'd you manage that?
yeah.. i kinda should be in the world book of records for being able to do the impossible.
i made my last htc touch pro 2 brake it's screen when i flew off by opening the keyboard.
apparently the screen came off or a screw came of or something.
i'm good at that .
besides, i'm a big lad, and when i sit down the fabric of my jeans curls (english is not my native language, so i'm not to sure how to describe it), like a rinkle.
at the top it presses the power button (which gets pressed so bloody easily).
pressing the menu button is easy, it happends all the time apparently.
it happened before that i suddenly had a different background, deleted widgets, replaced widgets, called people, turned on gps, opened a program etc.
believe, i can get impossible things happen i'm just a professional clumsy dude haha.
but anyways, you got an idea?
I don't know how to disable it, but you could get a case.
Check these out:
http://forum.xda-developers.com/showthread.php?t=673135
I got one and they're pretty cool. Dirt cheap too.
oh right lol! i'd be careful if your pockets are tight, some people broke the nexus one screens with tight pockets, and my desire came with a warning to remove from pockets before sitting down
but i'm sorry i don't know how to disable it, i have rooted my phone and installed froyo which doesn't do it, but its not a perfect rom yet (certain stuff doesn't work)
If you keep the screen side against your leg, the screen will eventually curve in at the center. Happened to my N95 8GB. I can almost guarantee over time it will happen with the Desire. Dont ever sit on it. EVER.
JagSem said:
If you keep the screen side against your leg, the screen will eventually curve in at the center. Happened to my N95 8GB. I can almost guarantee over time it will happen with the Desire. Dont ever sit on it. EVER.
Click to expand...
Click to collapse
i don't sit on it, it's in my front pocket.
but still, i understand what you're saying, and i geuss you could be right.
but then again, i bought a mobile phone so i could have a phone that's mobile.
and beind a man, i put stuff in my pockets, same with my phone.
so a phone should be made to be put in a pocket.
(not back pocket, because i'll crush it when i sit on it, but in the front pocket).
still, i would like to hear from somebody who found a way to disable the menu key.
it doesn't make sense to me at all, to have a touchscreen that you unlock with a button.....
still... nodbody seems to know anything as simple as turning off the function of a button....
hi ya guys,
i was wondering how do i fix my touch that doesn't seem to working.
Story on how it happened:
i was at Vicroads in melbourne waiting for my friend to have his turn at the counter for his business. I was visiting engadget.com on opera it was all working find i even showed me friend on an article and touch worked fine. After i find it running a bit slow i did a reset(by using the stylist to press the rest button on it.) After that restart the touch screen stop working.
Any suggestion on how to fix it?
Thanks,
Quan
do you have a hard case around the phone? I've read before that sometimes the hard case around it will put pressure on the screen thus already registering a "touch" on the device... thus meaning no other touch will register since its not a multi touch device. Although if you pressed your stylus into the reset button odds are if you had a hard case on there you would have had to take it off and it wouldn't have made sense for you to put it back on before you saw it was working again SOOOoooooo I'll guess that isn't an issue.
ALSO I read somewhere in here, not too long ago... 2 weeks maybe.... that some people had gunk (for lack of a better word) built up around the edge of the screen. With the gunk, dirt whatever built up around the edge it was doing the same thing as the cases where it was causing the screen to already register a screen.
I believe they used their finger nail to run it along the edge and get the stuff out... one person used some sort of knife (I shutter at the idea of taking a knife anywhere near my screen haha) and cleaned it out
'
Just a thought... if that isn't the issue then I'm sure someone else will chime in soon.
Could very well just be a hardware glitch, all be it a very random one
today i applied an XO skin and i applied the wet applicator only once and squeegeed the water out just like the instructions says and now for some reason, my power button has stopped working and sometimes it does work but it acts as if im holding down the power button and my power menu options pop up..... i bought this device unlocked from Expansys_USA and their customer service is done for the weekend....should i try putting it in rice?? im freaking out right now....this is not cheap, and i am seriously gonna be pissed if it was cuz of the XO....HELP.... :'(
How soon after applying the skin did you put your battery back in the device and try to turn it on?
Usually, you have to wait at least 24hours after applying a wet skin to have enough time for it to dry safely.
EP2008 said:
How soon after applying the skin did you put your battery back in the device and try to turn it on?
Usually, you have to wait at least 24hours after applying a wet skin to have enough time for it to dry safely.
Click to expand...
Click to collapse
well thats the thing...i hated how the screen protector looked so i took it off and got rid of it, and then i turned on the phone......it was fine for a while, and then it just stopped working.....i have no idea what Expansys's warranty is on their unlocked phones either
Simer03 said:
today i applied an XO skin and i applied the wet applicator only once and squeegeed the water out just like the instructions says and now for some reason, my power button has stopped working and sometimes it does work but it acts as if im holding down the power button and my power menu options pop up..... i bought this device unlocked from Expansys_USA and their customer service is done for the weekend....should i try putting it in rice?? im freaking out right now....this is not cheap, and i am seriously gonna be pissed if it was cuz of the XO....HELP.... :'(
Click to expand...
Click to collapse
This happened with my Captivate some time ago. I think it might have been from dropping it. The SAME EXACT thing happens when trying use the power button on the captivate. Sometimes it work fine for a few pushes, other times it will act like I held it down on a push, and sometimes when just holding it, it pops the power menu up. I think the contact inside the switch is busted and floating around. When it touches, it activates. Therefor, it can be activated by shaking the phone. I can replicate it on my Captivate.
Those buttons are pretty much tiny little switches on the PCB. They probably got water in them if they work sometimes, and then don't work - and sometimes seem stuck on.
You'd need to clean the switch with some contact cleaner of some kind... but you'd need to take apart your phone most likely. You don't really want to get that all in your phone, or on the screen. It might ruin the coating on the screen, or damage other stuff depending on what type of cleaner you used.
Luxferro said:
Those buttons are pretty much tiny little switches on the PCB. They probably got water in them if they work sometimes, and then don't work - and sometimes seem stuck on.
You'd need to clean the switch with some contact cleaner of some kind... but you'd need to take apart your phone most likely. You don't really want to get that all in your phone, or on the screen. It might ruin the coating on the screen, or damage other stuff depending on what type of cleaner you used.
Click to expand...
Click to collapse
Hopefully this fixes his. I still have a captivate with a non working power button. Cleaning it didn't help.
Sent from my Galaxy Nexus
it is easy to fix once you disassemble the housing you just pry open the power button and clean the contacts
http://www.youtube.com/watch?v=1WqajUcI_oU
at 1:56
you remove the black tape around the power button so you can see the contacts just clean them and you are good
bear in mind that you don't have to disassemble the boards like the video , just the housing
Thanks guys! I left it in rice overnight and now everything seems to be working perfect! Oh man....I was so scared! I bought this mofo unlocked! Its funny how when u actually try to protect it, it just ends up getting worse! I'm done with wet applies, I'm keeping it naked! Lol
Edit: its still doing the same thing again...spoke too soon......well kinda....its not doing it nearly as much
sent from my Nexus Prime
DynamicRam said:
it is easy to fix once you disassemble the housing you just pry open the power button and clean the contacts
http://www.youtube.com/watch?v=1WqajUcI_oU
at 1:56
you remove the black tape around the power button so you can see the contacts just clean them and you are good
bear in mind that you don't have to disassemble the boards like the video , just the housing
Click to expand...
Click to collapse
i will try this now!
I was having trouble with my touchscreen - it kept registering presses in the middle when I wasn't even touching it. I've been out of warranty for 6 or so months so I decided to repair it myself. there was probably dust or hair stuck under the digitizer.
I took apart my phone, wiggled stuff around, and put it back together. that did the trick and my touchscreen is no longer an issue. however, I may have lost some parts for my power button. I don't have any detailed reference material / images to go by, so I don't know what's wrong. I _do_ have the long black piece that is the cover and the silver metal housing that goes over the microswitch. is there a third piece?
tl;dr - can someone take photos of their power switch for me? not the button on the top but the internals?
No there's not you may just need to open back up and make sure the parts are facing the right way.
I dropped my phone in water and put it in rice then rice got into it so I had to open to get it out
Sent from my PC36100 using XDA
if there's no third part, can someone post a photo to show how the parts align? I'm not sure how it's supposed to go together.