Hello all! I originally had a Cingular 8125, but recently upgraded to a Cingular 8525. Can someone tell me.... How do I find/activate? the handwriting program. I used to be able to "write" my emails, etc., and it would recognize my handwriting and then change it into print. I could also use the handwriiting program with the NOTE program and just freehand write myself information. Is this NOT included with the 8525 but is with the 8125? Seems strange to me that they'd take something like that out, but...? I can't seem to find it. If it's NOT there, is there a .cab or downloadable program that will do the same function? Thank you all in advance.
You're looking for the Transcriber. I have it in my ROMs, however I'm not sure if it's workable as a CAB - or if a CAB is available...
Here's the cab.
Thank you both so much.... I just downloaded it, and I will install it. I wonder why they didn't put it into the 8525? Oh well... why wonder things I'll never know the answer to
Related
I flashed to the htc release wm 6.1 but accidentally did a foreign version. I flashed it again with the US release and it works fine except the symbols E, D, X, W, S, Z, Q, and A are not working correctly. They input a different symbol.
I went to do the keyboard fix...
"Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal)."
...and the value was already 132105 (20409 in decimal)
I went ahead and changed it to 132104 and then back to 132105 but it is still not working.
Is there such a program that would allow me to easily re-map the keyboard?
Any help is appreciated!
schaps advanced config 2
Thanks!
I ended up just finding this fix a little further down the page...
"Issue: When applying a non-cingular ROM to an 8525 its default keyboard is different than the 8525.
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
scfreshy said:
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
Click to expand...
Click to collapse
FIXED sorry for clutter!
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
No it doesn't fix the problem, any other place in the registry do you know....? Thank you!!
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Greeee said:
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Click to expand...
Click to collapse
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
kareem9nba said:
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
Click to expand...
Click to collapse
Hi there,
I'm actually new to Smartphones, and the Tytn / Hermes was going cheaply online (ebay unfortunately), but the phone itself is excellent and is easy to use from back in my windows days.
Most is familiar, but seeing how far Windows can go before I want to switch to Linux.
Where would I get the ACT? Is it downloadable from here as a development tool, or is it online needing payments etc?
Thank you,
greee, u can get it at schaps website here: http://forum.xda-developers.com/showthread.php?t=317070&highlight=advanced
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Greeee said:
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Click to expand...
Click to collapse
Both should install on main memory.
Are you getting an error when the don't install?
So far kareem, i'm getting an XML output for the ACT, and for Pocket MSN it reports:
Setup Is Not a valid Pocket PC application.
With the ACT, i've no option to install, although the setup file I have was meant to be a cab file.
Thank you,
Scratch all that, got both PocketMSN and ACT installed today! For some reason the keyboard was in German, so switched that back!
Thanks guys!
Now got to find uber cool stuffs for my phone...
what's the value for an azerty keyboard
I did some searching around regarding this but could not come up with any final conclusions regarding this issue. I'm posting this on behalf of a friend of mine who has a Dash. I know it's possible to set up ppcs to have Japanese input (i've set up my tilt to do so) but can this be done on a smartphone?
If anyone has any feedback regarding this that would be a great help! Thanks!
dantegl36 said:
I did some searching around regarding this but could not come up with any final conclusions regarding this issue. I'm posting this on behalf of a friend of mine who has a Dash. I know it's possible to set up ppcs to have Japanese input (i've set up my tilt to do so) but can this be done on a smartphone?
If anyone has any feedback regarding this that would be a great help! Thanks!
Click to expand...
Click to collapse
Yup its posible I've done it before my dash.
with english and japanese/chinese characters it was a .cab file that I downloaded from some company I delet it the file some time ago because I have the new rom from kavana that has english/chinese so I din't think I would need it anymore. The only proble I had was that it took alot of memory from the phone.
Hahahahaha sorry I cant post it. you should look for it better if you can't find it I think I have the download link bookmark on my friends PC and see if I can share it....
If you could post that that would be great. I've searched for some time and have had no luck finding it. When you installed it were you still able to input with english characters as well? I'm not familiar with how smartphones work.
Anyone else know if this is possible?
I've been playing around with the Incite a good bit and discovered that M3D works a lot better on it than it did on the Tilt, but there is no WQVGA version of it, so that led me to search around a bit. After a bit of searching, I discovered that there is a version of M2D for the Omnia, and guess what! It works on the Incite too! And this is how to do it.
1. Install the M2D all in one cab file. (make sure you have 20mb in the phone storage and install directly to the phone, NOT the storage card or it will not work)
2. Install the Opera browser cab for the internet tab (works from the storage card)
3. Install the SECcontact cab (this is to view contacts in the contact list)
The only tab that doesn't work is the comm tab. Other than that, the Incite renders the program flawlessly. (no probs with standby, powering off, etc.) Enjoy!
Thanks to:
SztupY for Manila
NFSFAN for Opera
And black-DraGon for SECcontact
Download all the files here!
http://www.mediafire.com/?sharekey=56abdfd4acbdc933d1014a7a667fa2b4e04e75f6e8ebb871http://www.mediafire.com/?sharekey=56abdfd4acbdc933d1014a7a667fa2b4e04e75f6e8ebb871
Here is a fix for the Comm tab.You will also need the Comm Manager if you don't already have it.
http://forum.xda-developers.com/showthread.php?t=430468
Thank you very much, well, now we have a fully functional M2D! Another thing is that if you want to use one of the comm managers from that thread, it works just as well.
hi guys, i also have M2D on my incite and works fairly well. im also using the omnia m2d cab. i tried M3D for tilt but didnt work well.
Thats because the the M3D cab is QVGA, the Incite is WQVGA. If someone could port M3D to WQVGA our devices would run it better than the tilt, and not have the same issues.
So now I'm gonna work on some themes for M2D, will be posted them soon!
backspacepc
So that you're not doing unnecessary, modaco.com has a thread with lots of themes modified for the Omnia. Now get back to work on the ROM's!!
dustinmcd said:
backspacepc
So that you're not doing unnecessary, modaco.com has a thread with lots of themes modified for the Omnia. Now get back to work on the ROM's!!
Click to expand...
Click to collapse
well, not everyone here is a member there, so I'll pick the best there, give credit, and post them here. thank you, and I already knew about them.
Is anyone else having the issue where scrolling side-wise through the tabs lags a bit?
It looks like it tries to load whatever tab my finger is over while scrolling ... and it slows down the phone considerably.
Help Please
I have installed the manila 2D and now I am not able to find the FM radio application. I listen to the radio a lot. can some one help me where i can find the FM radio applicaiton.
Thanks in advance.
I'm a noob at this whole thing. Can someone point me in to a step by step tutorial for installing this? (I'm sure i can figure it out if thier isn't one)
And once installed can you switch back to the original UI , and if so, how?
Thanks!
Just read the first post, and install in that order. To disable: start/settings/today/items and uncheck TouchFLO
ok, i have everything working. Thanks!
I have another question though. I installed M2DC in order to install some skins for M2D. The only ones i could find were Omnia skins. When i install them the scroll bar (the one with home, people, ect.) is not at the bottom resulting in about 3/8" of unused screen. Does anyone know how to fix this?
Those skins are WVGA and your phone is WQVGA, which is why it doesn't display properly. In order to fix it, open M2C and restore original layout and it should fix it.
ATT's Incite Windows Mobile 6.5?
Just wondering if anyone has heard if ATT is going to offer this upgrade?
jayray49 said:
Just wondering if anyone has heard if ATT is going to offer this upgrade?
Click to expand...
Click to collapse
spocky is working on one now here is the kitchen
http://forum.xda-developers.com/showthread.php?t=477104&page=99
WOW that was fast Imty_45
I sure hope this one is as good as the WM 6.5 I installed on my Hermes
Thanks everyone for all of your help
Jay
Magnificent !!!
Worked like a charm.... Stupendous, backspacepc!!
Just some minor questions:
1. How does one change the settings ? Or is this just a skin...
2. How do you move between items on the main screen (bottom)...right now I have to choose each one manually like weather, music etc....Is it possible to scroll with gesture?
Thanks !
LG Incite ROM Flash How to
Hey guys, reading through this, and seems like good stuff, but...after flashing my HTC with unlocking and all that, my question is, how do I initiate this program? Do I have to unlock the Incite first?
Cab files on Incite
I've tried to drop this on my phone. Sorry guys, I've been out of the archive for a long time. Trying to update to the M2D. What is a CAB file and how do i create one for dropping this program onto? THe original version of this phone is way to slow...looking to update..pls help
Hi Folks,
I am replacing my keyboard on my AT&T Tilt, note I am saying keyboard and not the keypad on front of phone.
I have made one such post on this on xda already without much success in response, maybe because I couched the question wrong, not understanding what I really wanted to say.
So, here I go again.
I am looking to install a TyTnII keyboard on my AT& Tilt. I may purchase from here:
https://www.gsm4world.us/htc-tytn-ii-p4550-oem-keyboard-w-flex-d-01433_297.html
What do I need to do to make this keyboard compatible with my Tilt? I have seen threads talking around this subject but cannot get specifics on the TyTnII keyboard drivers (ROM) for use on the Tilt. I have seen some posts suggesting installing a ROM, but it seems these posts suggest flashing the Tilt with an entire TyTnII ROM, not just the keyboard ROM which I want to avoid. If someone has just such a suitable ROM - TyTnII keyboard ROM for use on a TILT, I would be so appreciative.
I have seen some posts suggesting editing the Tilt registry. But what do you use to edit the registry? I would prefer this option if the registry editor was freely available. Could someone please advise where I can find a regsitry editor for free or how else I could effect this? What is the correct registry edit?
Thanks all.
Hello,
A few days ago I flashed a Windows 6.5 ROM, (XannyTechROM GRID LEO 2.6 ROM) and I really love it, it's like having a new phone. However, for text input tools, it only has phone keyboards like qwerty, phone keypad. But it looks like it does not have transcriber or letter recognizer and I use these when I write longer emails. Can anyone help and tell me if it's possible to install these somehow?
Thank you very much!
Tried this in the apps section?
http://forum.xda-developers.com/showthread.php?t=627139&highlight=transcriber
thank you, I have not tried it yet but I will in a few minutes. Anyone has a cab for Letter Recognizer, please?
Thank you everyone