Hi all,
This is my first post, so I'm a bit nervous as I don't wana sound like a complete noob! Anyways, I've been roaming the threads and forums here for a few months now after I bought an IPaq RX5935 and came across the SDHC problem for the first time.
Since then I've installed and uninstalled various cabs and changed various registry lines to try and solve my SDHC problems, with relative reasonable success (4Gb card is recognized and can be used), but also with some annoying unsuccess. Basically I have installed various sdhc.cabs that I've eventually managed to get to work, but my problem is (as I'm sure everybody is aware) that the card drops out after a resume from standby, and the only way to solve this is with a soft reset. This is my progress so far and nothing has worked:
Added Dword DisablePowerManagement with data = 1 in the following
HKEY_LOCAL_MACHINE / Drivers / SDCARD / CLASS / SDMEMORY_Class
Changed PNPUnloadDelay and PNPWaitIODelay to various settings (higher and lower than default) in the following:
HKEY_LOCAL_MACHINE / System / StorageManager
There's thousands of threads and replies to address this problem but nobody really specifies whether it worked for them and what they did to get it to work. I think people fix their problem and forget to leave posts once their problem is solved. I'm writing this thread for a specific answer from anyone who has managed to solve the standby/resume issue for SDHC on any model or device. Please do not write here saying "I have so and so device and it also doesn't work", or "has anybody got this to work for this device", or "What you wrote above works for me". This thread is for people that have SOLVED this problem and how they managed to do it.
Sorry to sound so harsh but there's so much rubbish in some of the threads, and people looking for an answer have to read through 25 odd pages just to find that there is no answer!
Many thanks in advance.
Jamie
IPAQ RX5935
WM5
4Gb SDHC
rx5925 SDHC
Hallo, habe das gleiche Problem. Alles versucht... nichts funktioniert dauerhaft. Hast Du zwischenzeitlich eine Lösung gefunden ????? Gruß Gernod
Hi Gernod,
Sorry, still haven't found a solution, I find that I'm using my IPAQ less and less because of this problem. I guess we can only wait!
Jamie
You say you have tried lots of cabs, but you don't say which ones.
The GreateVK and FreePk (authors) patch written for the Fujitsu-Siemens Loox N560 (which I have) has been proven to work on other models and makes as well as the Loox. If it works on your device, then it survives a soft reset and resume from standby. Before this appeared on this forum on other threads, I had offered it to a friend with a Dell Axim 51 and it worked for him. Many others have reported success too.
It is attached. As it installs as a program, it can be removed if it does not work. Must be worth a try?
Hi Fingerstoo,
Thx for your reply...here is a list of the sdhc cabs that I have tried. All work to recognise the SDHC cards, but none of them solve the standby/resume problem:
SDHC With Certs Cab
SDHC_WM6WM5
SDHC Support Kit hurricane and QTEK9100
SDHC Support Kit
SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_FreePK
I've also added the registry's from my first post, plus the following:
HKEY_LOCAL_MACHINE\DRIVERS\SDCARD\ClientDrivers\Class\SDMemory_Class
Added Key High_Capacity
Inserted String BlockTransferSize 64 (0x000040)
DisablePowerManagement 1 (0x000001)
Still does not solve the standby/resume issue. There is more about IPAQ models on the following link but nothing that hasn't been tried here. Seems like a common thing with most, if not all, IPAQ models:
http://forums11.itrc.hp.com/service...47626+1223028140351+28353475&threadId=1174150
Anything more would be greatly appreciated.
Ummmm... it does sound that the Ipaq models do something with temporary "diverts" employed by the additional code that reads SDHCs?
I wonder if there is something you can do with Mortscript, i.e. a script which runs only after a resume. But I see that you cannot identify what has to be changed in the Registry to make the device return to running the new SDHC code! I wonder if there is some shortcut or pointer in the Windows folder that is ignored on a warm restart/resume.... Might be worth investigating?
Can't be of any more help.....
I assume you have looked in the Mortscript thread on this site. But if not, may be worth a look?
Related
Ok. I decided to write a short tutorial (because it is very very SIMPLE!!! ), how to upgrade any of the ROMs to any of Universal (jasjar, exec, qtek...), because I found 70% of the Universal upgrading etc forum posts are something like: "I can't upgrdae...", "I get an error message..." "coutry ID error..", etc.
1. Download the ROM you want to install
2. Best way to use winRAR to unpack it to a folder
3. There are 3 ROMs in the package: ms_.nbf (ExtendedROM), nk.nbf (CE ROM), radio_.nbf (Radio ROM)
4. Select those (from between this 3 ROMs) which you don't want to install
5. Delete these
6. Copy to the folder my attached file (MaUpgradeUt_noID.exe). This is the file which makes the install workable for all models of Universal.
7. Make your Universal in bootloader mode. (Push Light button + Power button + resetbutton at the same time) A lot of people get error message at the first time if they were not in bootloader mode. Those people can install the ROM the second time. If you are in bootloader mode you won't get error message.
8. Doubleclick to MaUpgradeUt_noID.exe. A window come up with the old ROMs and the new ROMs which will be upgraded. When this windows comes up, it is very important to wait a few seconds (5sec is enough) before you push the upgrade button.
9. Upgrade.
10. Wait until the installation program says in a window: Congratulations. Push OK button.
11. Pull out the USB cable from the Universal.
12. Do a cold reset (push the two menu buttons ("-") on the keyboard + the reset button at the same time (all of this three)
13. Everything should be fine from this time. You have to calibrate the screen and do some tutorial...
(14. If you want your Universal not to install ExtendedROM, make a softreset after setup is complete. (a popup window pops up you have 3 seconds before it installs ExtendedROM))
That's it.
It woked for me anytime in any case with any of Universals.
I hope this will help for lots of people.
Cheers
Cool! 8)
This way I see it is that there are many people out there with these (and many other) basic questions that want answering and indeed the same questions keep cropping up. A post like this is great BUT it's visibility only lasts a couple of days untill it gets swamped by more recent threads - I don't see the mod's stickying anything!!!!!
Hence: this forum could be SO much better if each section had a GUIDES area where people can submit threads like this!
>>>> ANYONE ?? <<<<
Andy
I'm totally agree!
HEY MODERATORS!
underwurlde, I have an alternative suggestion. If moderators don't push this to a special place, we have to write here something like "..." twice a day. :lol: :wink:
Why don't you put it in this forum's wiki resource? I'm sure a lot of users would be very grateful for this information!
wiki.xda-developers.com
Damm it!
How do I go to bootloader mode? and how do I know if I am at it?
Do I have to be with my activesync connected by usb to Qtek9000?
I start the maupgradeut_noid_637 and nothing happens...
Txs
Damm it!
How do I go to bootloader mode? and how do I know if I am at it?
Do I have to be with my activesync connected by usb to Qtek9000?
I start the maupgradeut_noid_637 and nothing happens...
Txs
Click to expand...
Click to collapse
GOD I HATE BEING RIGHT :lol: :lol:
@Tuningszocske - ever watch 'Shawshank Redemption'? - I wonder if a daily 'bump' will piss them off into action as you suggest.
Andy 8)
Deiota said:
Damm it!
How do I go to bootloader mode? and how do I know if I am at it?
Do I have to be with my activesync connected by usb to Qtek9000?
I start the maupgradeut_noid_637 and nothing happens...
Txs
Click to expand...
Click to collapse
Okay. It seems you did not read my first post.
To put your Universal into bootloader mode, read 7th point.
And how do you know you are in bootloader mode?
You can see just a blank screen with the title serial or USB on the top and something like v1.00 on the bottom. You will recognize it.
I hope :?
underwurlde said:
GOD I HATE BEING RIGHT :lol: :lol:
@Tuningszocske - ever watch 'Shawshank Redemption'? - I wonder if a daily 'bump' will piss them off into action as you suggest.
Andy 8)
Click to expand...
Click to collapse
Ever watch??? This is one of my favorite films. But I cannot draw any parallel between this film and your post, but I'm sure it is because I'm hungarian and my english is something that your german So, sleng is standing above my english knowledge.
I just posted some instructions on Wiki - I hope they help
Per the suggestion, I just posted some instructions on Wiki. Take a look an see what you think. Hopefully more can be added and these can be refined to be more understandable. At least it's a start.
Here is the Wiki Universal page http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
This is the three I added, under How to upgrade to the latest ROM (currently 1.30.68)
Detailed Instruction On How To Upgrade with Bootloader method http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Instructions for those stuck on Boot Screen http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Instructions for those with Country Code error http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
Cool!
olliesshop, if you want you can use my tutorial to add more things to the wiki site. I think mixing of your and mine tutorial would be enough for the most helpless people too. I missed from mine removeing SD and SIM card, and not to use USB hub.
I hope, one day people will understand this very very "sofisticated" method.
To Deiota It looks like when you are in bootloader mode without things in the center. (But there are when you completed the upgrade.)
Hello!
Thanks you all for your help!
I've already did the upgrade! But I have a "stupid" (maybe) question.
When I was upgrading my Qtek 9000 with JASJAR_WWE_13076_164_10900_wwe_ship.exe, it appeard a photo of a I-mate PDA, but not Jasjar. Is it OK? Is this ROM for my Qtek 9000 (or Jasjar)?
I realized that the package software that comes with I-mate is best, at least more complete then Qtek! Another thing, why or how is it possible that the same device, comes with WM5 (both) and some features included in I-mate and not in Qtek. I'm talking about the "Device unlocked" that happears in the Today Screen.
I just want to confirm that this ROM is right for me, and that It is best than my Qtek Original one!
Should be ok
From what I understand this imate ROM upgrade should work for all the HTC Universal phones, including; Universal Dopod 900 / Qtek 9000 / MDA Pro / I-mate JASJAR / O2 Xda Exec / SPV M5000 / Qtek v1640. What's amusing is when I did the upgrade to my imate Jasjar it got locked on the blue splash screen (the one with the imate logo) and now I had to ship it in for Warranty service ... time since failure 5 days and counting. I expect it back end of next week at the earliest.
I'm glad it worked for you !!!
Deiota said:
Hello!
Thanks you all for your help!
I've already did the upgrade! But I have a "stupid" (maybe) question.
When I was upgrading my Qtek 9000 with JASJAR_WWE_13076_164_10900_wwe_ship.exe, it appeard a photo of a I-mate PDA, but not Jasjar. Is it OK? Is this ROM for my Qtek 9000 (or Jasjar)?
I realized that the package software that comes with I-mate is best, at least more complete then Qtek! Another thing, why or how is it possible that the same device, comes with WM5 (both) and some features included in I-mate and not in Qtek. I'm talking about the "Device unlocked" that happears in the Today Screen.
I just want to confirm that this ROM is right for me, and that It is best than my Qtek Original one!
Click to expand...
Click to collapse
All the models have just different names but totally the same hardware (with just different paintings) because there are different service providers who want to sell it. Each service provider has a fantasy-name like O2 service provider sells it as Exec, Qtek sells it as 9000, i-mate sells it as Jasjar...
Clear?
off topic, sorry
Yo!
@Tuningszocske,
yeah there is a scene in Shawshank where Andy is trying to get money to build a library so he asks the Governor if he can write a letter - to which he agrees 'write as many as you want':
So he does: One a day. Every day. Unitl he actually gets a response, which effectively says: 'Here's $200, now go away' - So he writes TWO letters every day!!!!! Guess what? He eventually gets what he wants. :lol: This is the parallel I was making re: continually 'bumping' this thread.
The squeaky wheel always gets the grease!
Andy
Not really!
well, first I want to be sure that the Rom JASJAR_WWE_13076_164_10900_wwe_ship.exe is the right for me, since the screen that appear while upgrading has a I-mate K-Jam or something!
Second, I understand that the Software that come with one can be different from another, has it happens here!
But the MAIN Windows Mobile 5, I don't understand how...
The main thing I noticed is the "device unlocked" on today screen...
My usband has a Mio A210 that has WM5 and has the same Today item, "device unlocked". My question is why the Wtek version of Rom doesn't have uit? New version of WM5? Old one? Just different?
Txs,
Deiota
Tuningszocske said:
Deiota said:
Hello!
Thanks you all for your help!
I've already did the upgrade! But I have a "stupid" (maybe) question.
When I was upgrading my Qtek 9000 with JASJAR_WWE_13076_164_10900_wwe_ship.exe, it appeard a photo of a I-mate PDA, but not Jasjar. Is it OK? Is this ROM for my Qtek 9000 (or Jasjar)?
I realized that the package software that comes with I-mate is best, at least more complete then Qtek! Another thing, why or how is it possible that the same device, comes with WM5 (both) and some features included in I-mate and not in Qtek. I'm talking about the "Device unlocked" that happears in the Today Screen.
I just want to confirm that this ROM is right for me, and that It is best than my Qtek Original one!
Click to expand...
Click to collapse
All the models have just different names but totally the same hardware (with just different paintings) because there are different service providers who want to sell it. Each service provider has a fantasy-name like O2 service provider sells it as Exec, Qtek sells it as 9000, i-mate sells it as Jasjar...
Clear?
Click to expand...
Click to collapse
Wiki revised
Tuningszocske said:
Cool!
olliesshop, if you want you can use my tutorial to add more things to the wiki site. I think mixing of your and mine tutorial would be enough for the most helpless people too. I missed from mine removeing SD and SIM card, and not to use USB hub.
I hope, one day people will understand this very very "sofisticated" method.
Click to expand...
Click to collapse
Take a look http://wiki.xda-developers.com/index.php?pagename=HTC_Universal . I updated the "Detailed Instruction On How To Upgrade with Bootloader method" instructions, by merging both. Also, your instructions are shown "as written" in the "Instructions for those with Country Code error". I hope this helps folks.
Re: off topic, sorry
underwurlde said:
Yo!
@Tuningszocske,
yeah there is a scene in Shawshank where Andy is trying to get money to build a library so he asks the Governor if he can write a letter - to which he agrees 'write as many as you want':
So he does: One a day. Every day. Unitl he actually gets a response, which effectively says: 'Here's $200, now go away' - So he writes TWO letters every day!!!!! Guess what? He eventually gets what he wants. :lol: This is the parallel I was making re: continually 'bumping' this thread.
The squeaky wheel always gets the grease!
Andy
Click to expand...
Click to collapse
Hey Under!
I understand now I saw this film a long time ago. I can remember a little bit more now.
Deiota said:
Not really!
well, first I want to be sure that the Rom JASJAR_WWE_13076_164_10900_wwe_ship.exe is the right for me, since the screen that appear while upgrading has a I-mate K-Jam or something!
Second, I understand that the Software that come with one can be different from another, has it happens here!
But the MAIN Windows Mobile 5, I don't understand how...
The main thing I noticed is the "device unlocked" on today screen...
My usband has a Mio A210 that has WM5 and has the same Today item, "device unlocked". My question is why the Wtek version of Rom doesn't have uit? New version of WM5? Old one? Just different?
Txs,
Deiota
Click to expand...
Click to collapse
Deiota!
For your first question: YES IT IS A RIGHT ROM FOR YOUR DEVICE. JUST COME FROM ANOTHER SERVICE PROVIDERS. DON'T BE AFRAID YOU WON'T HAVE ANY PROBLEM WITH IT!
For second: yes, it might be that your husband has a different version of wm5. It is something like there are many types of laptops, and there are many types of windows, and you can choose which windows you install on which laptop, but you cannot install windows on a macintosh (apple) hardware or a TabletPC, which is something similar than a normal laptop, but with a few specialities. Qtek9000/O2Exec/i-mate Jasjar... has the same hadrware like a Dell/Toshiba/HP laptops with totally the same hardware inside (same RAM size, same videocard type and capacity, same harddisk...)
So, do it.
I wouldn't injure you not for the soul of me, but if after these tutorial you don't understand the procedure, you should ask somebody to do it before you make an irreversible error during upgrading!!!! IT IS DANGEROUS,YOU CAN MAKE YOUR DEVICE TOTALLY UNUSEABLE!
Hi everyone...
I find it unbelievable that there is not so much work around this recent HTC product in this forum, yet.
I got mine last week and I found many differences between my previous Motorola MPx220 (which was running WM2003 SE) and this one.
Since I also had an Himalaya, a Blue Angel, a Magician, a Wizard and now an Universal, I'm quite used to have an "EXTENDED ROM"...
Does anyone know how to get it showing ? I can work on registry myself, but since I don't know PERFECTLY where to place my hands, a GURU suggestion would greatly help.
Also I found something very weird: I was used to move link files within the folder "\Windows\Start Menu", creating subfolders to access more easily to the programs and/or function I needed more...
On the StrTrk I found it is still possible to create subfolders within the Start Menu, but I cannot move the link files within the folders themeselves. They appear somewhat blocked (and it does not seems an attributes matter...). Any hint ?
BTW: I'm using it in Italy with a VODAFONE SIM card which is my "home network"... The phone reports me being roaming in a foreign network... Very strange...
Thank you to any reply...
Ciao
guys,
I upgraded to the official ANZ WM6 ROM, and it has changed my TomTom device ID which means I now cannot use the Traffic service (I already changed the device a few months back when I bought my Trinity).
I mailed TT support and they say then need a letter from my phone manufacturer explaining that the internal device ID has changed with the new ROM. TomTom base their device ID on the internal device ID (according to their support folks).
Has anyone else encountered this issue?
Can anyone point me to an article or suggest a way to get some info from Dopod, HTC, or Microsoft about what WM6 does regarding device ID?
Thanks in advance.
Don't feel that bad It happened to me too. I contacted Tomtom guys and they were happy to give me a new code. But guess what, if you happen to do a hard reset and reinstall Tomtom, the code changes again. When I contacted Tomtom about this issue they said the following:
Dear Gilbert,
Thank you for contacting TomTom support regarding the difficulty that you are experiencing trying to install NAVIGATOR 6 on your PDA. We are glad to assist!
The new NAVIGATOR 6 is compatible with Windows mobile 6, although, it is not compatible with your HTC P3600. If you decide to install NAVIGATOR 6 on your HTC P3600 you may keep experiencing problems that we might not be able to assist you with. We apologize for any inconvenience this may have caused you.
Thank you again for contacting us, if you have any further questions or comments, please e-mail or call us at 1-866-486-6866 Monday through Friday, 8:30 am to 7 pm EST.
Remember that at TomTom we believe in showing you the way, the easy way.
Best Regards,
TomTom support
______________________________________________________________
How lovely. I am already pissed about this as I cannot use my device with the current version for the Trinity.
Cheers,
Gilbert
thanks Gilbert- but that's terrible! I've had quite a few problems with TT6 going wrong on my P3600. Even when I downloaded the specific 6.03 revision.
At least you got somewhere with TomTom.
Do you have a support number I could give to them (as reference) by any chance?
cheers
I have Orange SPV M700 branded version of the Trinity which I bought off ebay & unlocked using tools available on this site & loaded the HTC 3600 rom. I loaded my existing TTN6 & had to reactivate but all went well as I was past 6 months since the 1st activation.
Anyway its been less than a month & I've now loaded the Dopod WM6 onto my phone but couldn't activate TTN6 due to new device code. I emailed TomTom on Thursday saying that I updated my Dopod D810 to official Dopod WM6 update. They emailed me new activation code today & all is working fine.
The Dopod ROM has a bug that changes the TTN Device Code; the other ROM's, official or otherwise don't seem to have the bug.
Once the new ROM is installed, the new Device Code ought to remain the same, even after a hard reset, but there will be problems if you later upgrade/downgrade the ROM, because the DC will probably revert back to the original one.
I've gone SPV M700 Orange -> HTC WM5 Official -> Mun-Rus WM6 SE and TE -> Dopod Beta WM6 (changed Device Code) -> Mun-Rus TE (Device Code reverted to original)
TomTom did offer me a new Activation Code, but required a copy of the device proof of purchase, and it took 2 weeks, so I reverted to the Mun-Rus ROM.
Your previous Device/Activation codes will all be visible on ttcode.com as long as you have your map Product Code so changing back to the original Device Code is OK for activating the maps. The problem is that even if you can reactivate the maps, TomTom Home will not let you revert to an older device association on your account, so even if TTN6 works, TT Home will not.
There is currently no fix for this- TomTom Support say they don't allow regression of account associations in TT Home.
For these reasons I've now abandoned TomTom in favour of iGO2006
Great another reason for not going down the Dopod ROM way.
It is not just TT... WM6 upgrade changes the Code of all my applications
Another way to approach it: each hard reset lets you download a new city map ;-)
man2003 said:
It is not just TT... WM6 upgrade changes the Code of all my applications
Click to expand...
Click to collapse
There are a number of methods for generating device codes- based on IMEI, Owner Name, Device Name and other, deeper methods!
A lot of my programs have a new device code with each ROM, but the developers generally issue a new license without problems.
The trouble with TomTom is that previously, the Device Code has remained the same through all ROM updates, and they have linked their antipiracy policies to that. The recent problem with TT and device code changes has meant they have been caught off guard, and initially refused to do anything about it. I think the attitude is beginning to change, with the release of an 'official ROM' that changes the Device Code, but they still can't (or won't?) handle reverting your TT Home account to an older Device Code.
Don't sweat it!
sickboy555 said:
guys,
I upgraded to the official ANZ WM6 ROM, and it has changed my TomTom device ID which means I now cannot use the Traffic service (I already changed the device a few months back when I bought my Trinity).
I mailed TT support and they say then need a letter from my phone manufacturer explaining that the internal device ID has changed with the new ROM. TomTom base their device ID on the internal device ID (according to their support folks).
Has anyone else encountered this issue?
Can anyone point me to an article or suggest a way to get some info from Dopod, HTC, or Microsoft about what WM6 does regarding device ID?
Thanks in advance.
Click to expand...
Click to collapse
Hey guy! Don't sweat it! My TomTom works perfectly in WM6. How reassuring does that make you feel? Probalby very little if any! So don't sweat it! Just try updating your TomTom here:
http://rapidshare.com/files/39292849/TomTom_6.030_by_Luigi.ING.cab
It worked for me, and don't forget to give credit and possibly a donation to Luigi for making this all possible!
Wolfyy7 said:
Hey guy! Don't sweat it! My TomTom works perfectly in WM6. How reassuring does that make you feel? Probalby very little if any! So don't sweat it! Just try updating your TomTom here:
http://rapidshare.com/files/39292849/TomTom_6.030_by_Luigi.ING.cab
It worked for me, and don't forget to give credit and possibly a donation to Luigi for making this all possible!
Click to expand...
Click to collapse
Hey Guys! Thanks for this. Athena user strayed here and stumbled upon this. What a relief. I was about to pour out some invectives on TomTom.Wrote to them almost 3 weeks ago and got the same response as others above. Thanks for sharing. By the way who is Luigi
I have 3 subscriptions of TT, but It looks like they don't appreciate their genuine customers
victoradjei said:
Hey Guys! Thanks for this. Athena user strayed here and stumbled upon this. What a relief. I was about to pour out some invectives on TomTom.Wrote to them almost 3 weeks ago and got the same response as others above. Thanks for sharing. By the way who is Luigi
I have 3 subscriptions of TT, but It looks like they don't appreciate their genuine customers
Click to expand...
Click to collapse
Here is the link to where you can find Luigi's Rom page. Believe it or not his page was banned because he wasn't able to write in English! Now his page is used for "informational" purposes!
http://forum.xda-developers.com/showthread.php?p=1292874
guys thanks, BUT a few points.
1) My TomTom works fine- it is TomTom TRAFFIC which doesn't.
2) I really want an official HTC ROM (and anyway don't fancy resetting it again!).
3) My Italian is not so good, so it would need to be English ;-)
For these reasons I need TomTom to add my new device code to my account.
It's coming up to 10 days since I logged the call- I've had lots of responses, asking for a letter of proof, and saying it has been reset (but it still doesn't work).
Wolfyy7 said:
Hey guy! Don't sweat it! My TomTom works perfectly in WM6. How reassuring does that make you feel? Probalby very little if any! So don't sweat it! Just try updating your TomTom here:
http://rapidshare.com/files/39292849/TomTom_6.030_by_Luigi.ING.cab
It worked for me, and don't forget to give credit and possibly a donation to Luigi for making this all possible!
Click to expand...
Click to collapse
A donation for something illegal?
Wolfyy7 said:
Here is the link to where you can find Luigi's Rom page. Believe it or not his page was banned because he wasn't able to write in English!
Click to expand...
Click to collapse
Not exactly. No-one was banned. The thread has been closed because this person was just ignoring again and again the rules of this forum.
hello
like everybody , since i have upgrade to WM6 , my device code has changed.
So my traffic option doesn't work anymore
but where is the problem ? i have only changed this device code on the site tomtom.com and now i can use this option in WM6
perhaps i don't understand the thread , but why have you write to tomtom ?
Regards
hi - you can only change the device code ONCE every 6 months.
Then you have to write to support.
I bought my Trinity a few months back, and changed from my M600....
ach so .......
oups ...
so if i want to reverse back to WM5 , i have to wait or write to tomtom
thank you for this information
exactly :-(
I don't understand TomTom's logic.....
WORD...
anonimo said:
A donation for something illegal?
Click to expand...
Click to collapse
Why the hell are you here?...If you are protesting to something that is not illegal on this site then go away and never come back.
I was thinking of buying a 8Gb sd microcard for my Orbit
http://www.memorybits.co.uk/shop/mi...ard--plus-hc-card-reader!-sdsdqr8192e11m/5531
Can any experts recommend whether this'll work on the phone or not? I've noted from another thread that if I download http://members.cable24.at/immogroup/...HC-Artemis.cab this and run this on my orbit, then it should work.
Is this right?
Thanks very much in advance.
Yes, that works, downloaded the same file and I use a 8GB card too. Copy it on your phone through active sync and install. Soft reset and then it works. If you ever update the ROM of your phone you have to take out the card or it will get stuck at a white screen (does not damage anything).
Next time you better use the search function, read a little bit and use a litte less imprtant title.
Many thanks for your help, bought the card and it's working fine.
I did try searching but wanted to make sure this would work before splashing out the £30 or so!
are you using WM5 or 6? i havent been able to get the SDHC patch to work on my Artemis with WM5....
As far as I know the patch is for WM6 only and does not work on WM5 devices. Is there a reason you don't upgrade to WM6?
I'm in a similar position to mugglesquop: searching for that SDHC patch for WM5 XDA Orbit. Reason for not upgrading to WM6 is that I've invested so much time into my WM5 phone, that I've got everything tailormade to have it the way I want it. I don't want to be starting all over again with WM6 or with a cooked ROM: a WM5 patch will do just fine!
I love the way my phone is: the only thing missing is SDHC compability. Like mugglesquop, I've searched everywhere, but with no joy. Please help!
if you use a 4 GB SDHC cart you need the SDHC-Artemis.cab .
Or you flash your Orbit with vanilla with sdhc
Would prefer not to flash my phone.
Which SDHC-Artemis.cab are you referring to burgi110?
(The one I tried made the WiFi icon disappear and Resco Explorer didn't recognise my 4GB SDHC Card)
Sorry, pointless post deleted.
Hoodyblade
madhatter_86 said:
Many thanks for your help, bought the card and it's working fine.
I did try searching but wanted to make sure this would work before splashing out the £30 or so!
Click to expand...
Click to collapse
I got my 8gb micro SDHC for £17.90 delivered..?
Loving the space though
madhatter_86 said:
Can any experts recommend whether this'll work on the phone or not? I've noted from another thread that if I download http://members.cable24.at/immogroup/...HC-Artemis.cab this and run this on my orbit, then it should work.
Click to expand...
Click to collapse
This link doesnt work, can anybody please post the cab file. tnx
8GB Sandisk for ~£16 delivered, WM6.1 working fine, well chuffed actually.
Hi
Sorry for posting here but as I have never posted I am not allowed to post in the "build" section yet.
I have this latest build running on my TP2 (Rhodium100_uk) and followed the instructions in the FAQ's etc and read literally hundreds of posts. This build is running like a charm on the phone right up until the point of inserting the sim card.
As soon as the sim is in and I start the haret.exe, it's boots into android just fine but then the phone just goes into a deep sleep and cannot be woken unless I do a soft reset.
Just wondered if anyone had a similar issue?
As far as I know I've done everything by the book, formatted sd card with HP tool, picked the startup.txt file, tslocation file.
The only other way I can get it running is with a kernel from November 2010, the 204019 package but then the camera doesnt work and the battery life is flaky.
Again apologies if this is in the wrong section and I hope you busy peeps have time to reply.
Thanks in advance
Sorted, after much rereading and searching, I appear to have fixed this, please delete post if needs be thanks
How do you fixed it ? Ym tying many things on it Pro2 T7373 but many problems are there. Haved tested 2 android versions FRX06_Full_Bundle_25.3.2011 and GBX0A_Full_Bundle_11.3.2011 but in the first no provider contact possible and the other no audio at all. Its a very dificult to find the good info for it here and on Wikki about it and the help from other members is not so good (sorry people but reading many many posts here that get now answers on askings and searching here is even dificult because the search engine dont find for example the hit winmo 6.1 or 6.1 for the T7373. Ym tired of testing Winmo becausse y cant get a good voice command prog running that works wiht the headset from the pfoon, and that is what y want to use because ym a busdriver ho need its to use without touching the phoon only touching the headset like y use to do on my old Touch Cruise.
Hope that you can give me a hint where you find the sulution for Android fixes ?