Related
Ok I searched on the forums hard for this one so forgive me if this has already been answered. I see to find people with Windows Mobile 6 and Windows XP or people with Windows Vista but Windows Mobile 5.
Since I'm running Vista, I use Windows Mobile Device Center instead of ActiveSync. The functionality of the program is fine, so I have no complaints. However, to upgrade ROMs or anything...I use an XP Machine as it seems Vista seems to think the device disconnects upon the loading of the bootloader. I've read somewhere in the forums that there is a driver update to fix that, but after applying...WMDC doesn't work properly...so I'd save the trouble and use a machine that has XP running instead until a better fix comes along.
My 8525 came stock with a program called Wireless Modem as of ROM 1.34.502.1 shipped, which seems to have been replaced by Internet Sharing.
The Wireless Modem application worked fine after setting up the modem with the Vista driver also found in the forums. I also tested the bluetooth connection and set that up to tether as well and it worked fine.
I finally decided to upgrade after days of reading and I tried to use the Wireless Modem feature. I noticed it wasn't there and tried to use Internet Sharing. The layouts are similar...but when I hook up the phone under USB, my computer doesn't even recognize it as a new device (modem) as I did uninstall the last driver.
When connected via Bluetooth, it recognized the device and installed the driver as Windows Mobile-based device support by default. Under services, only Active Sync is only available...as opposed to before when I had Dial-Up networking available. When I set up a PAN, the computer and device are connected together, however I do get the same problem as some others with a connection that is limited or local only. So the tethering is unsuccessful.
I recently upgraded my Cingular 8525 to WM6BE v1.2 (Cingular Edition)...which I can't seem to find in the threads anymore. I'm also running Radio 1.38.00.11...but I don't think that would affect anthing. I reverted back to my shipped ROM to check for alternate settings that might have helped...then I was going to revert back to WM6BE v1.2 Cingular...then I realized I accidently deleted that custom ROM and I couldn't find it anymore. I was stuck putting on the WM6BE v1.2 on the sticky thread after which forced me to reinstall the data settings/keyboard fix from the cab files. Haven't had problems with them but I did like that customized ROM for Cingular a little better considering I really like "clean" ROMs.
Anyway, I'm attempted to connect via MEdia Net AND Cingular GPRS settings provided by the Cingular Data Settings cab floating around the forums. It works fine it seems...it just seems like the problem is getting Vista to recognize the device as a modem, or at least having modem capabilities.
I guess thats as detailed as I can get right now. Hopefully someone can help now ^_^
You are right. I tried updating rom on Vista's Windows mobile Device and end up damaging my xda2i. The device displays "USB" when connected to cradle and "Serial v1. 01" when not. Do you have a solution apart from upgrading?
Solution on Vista
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Have I understand right? With this tweak We will be able to applied ROM upgrades to our HERMES from windows VISTA?
Confirmed.
I did already update my ROM in this way.
Cheers,
soniX
EDIT:
Please use HardSPL or something equal to be sure the risk is at a minimum.
And I can not be held responsible for any damage to your Hermes or your Brain
But as I said, for me it worked perfectly, remember to Restore the new Drivers or the Mobile Device Center will not work.
Hmm I don't think you people understand what I was asking...
I already know about that method to update with Vista...I actually tried it yesterday and for some reason it didn't work so I just use an XP Machine for now...but I was just asking merely about TETHERING.
I already have the ROMs of my choice loaded on my device.
In simpler words: How do I go about tethering (Running Internet Sharing) when my computer does not recognize the device as a modem...through USB or Bluetooth.
I'm running WM6BE v1.2 and Windows Vista Ultimate.
Maybe its Wm6BE, but I have used all the other roms (xda live, des, lsvw) and all I do is plug in the usb, start internet sharing and it connects no problem. Have to start internet sharing before wmdc starts. Internet Sharing works great, better than wireless modem. I was not able to use the WM6be due to problems with sbp pocket plus. I am currently using XDA live .30 and Vista Ultimate.
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
I enjoy the community so I think I'll do my best to contribute to it. When I get the chance, I'll try to make a guide with screenshots on using Windows Vista and loading WM6.
I'm going to try to switch to LVSW build with his new update today and I'll see how that works out.
I REALLY like the one custom build someone made (I forgot who) with the Cingular connection settings defaulted from the Cingular Shipped ROMs...I wish I can find those files again.
It seems like the people developing the new Cingular data connection cab files are really working hard at getting the default settings as if they just bought their phoes straight from Cingular.
I'll let you know how LVSW goes with Internet Sharing and Windows Vista
sonixwarrior said:
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Click to expand...
Click to collapse
Also, I've seen this guide posted twice...yours missing one step where I was supposed to "End WMDC.exe Process in Task Manager"
I still can't get Vista to run RUU...do you run the RUU with your device in Bootloader? I think I even tried that once and and still couldn't get it to work with the older Driver.
Not exactly sure what I'm missing or doing wrong...but its definitely after I install the driver. It acts as if I didn't install it at all, even if I check in drive details and its all correct in there.
i tried the method above for upgrading in vista and it didnt work for me...
what am i missing?
Where is it stopping?
Because I did it once, it has to work.
Where is it stopping? - At the bootloader (LSD-Screen with psychedelic colors ?) - or before ?
I will do an upgrade in the afternoon again and this time i will record ALL of my steps.
Hopefully I'll find the recept for the cake.
Cheers,
soniX
Yea it gets to the bootloader screen and I'm stuck as if I never loaded the AS4.5 drivers.
Sorry, too less time today for a screenshot-decorated guide.
I just upgraded my device again (only to proove it does work).
So here is again a guide, which differs to the first one.
I guess there are two ways to do this...
Prequesites:
- Search my previous post and download the USBAS.zip-File
- Extract it into a directory...
- You'll need your device and it has to be connected, too
The first approach:
Change the Serial-Driver
- On the device click Start > Settings, choose "Connections" there and click on "USB to PC"
- uncheck the item for "Enhanced..." there
- Click on OK.
- Now goto your Device Manager.
- Search an Item named "HTC USB Sync".
- Right-click it and choose "Update Driver".
- Choose the second option, then select to choose manually
- Select the directory where the zip has been extracted to and choose any inf file.
Start the Update-Tool
- After the driver-update you need to set the device back to RNDIS-Mode (follow Step 1 and recheck the option)
- Verify that you're running the correct drivers for the RNDIS-Device, the date in the device-manager has to be around January, 17th 2007.
- Start the ROM-Upgrade.
- It should work now.
For me it did not really work to switch from RNDIS to USB-Serial drivers in my localized (thanks bepe for the great work!) german WM6.
So if you have a problem with the first method use this one.
- Start your Device-Manager, we have to be very fast.
- Start the ROM-Upgrade as you've probably done before
- If the bootloader starts up, you'll notice a device/dettached,device/attached sound, this is your sign, goto to you Device-Manager.
- Search for the Entry "HTC USB Sync".
- Update drivers like it's written above.
- If it won't work and the upgrade tool dies with "cannot connect", don't worry. Reset your device (soft) and try again, this time you should not need to update the drivers.
Cheers,
soniX
I'm using XP and a USB cable. USed to work OK before upgrading to WM6 Black but now I get Error 797 on the PC saying modem not found or busy!
mrvanx said:
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
Click to expand...
Click to collapse
Take a look here
Code:
http://www.modaco.com/index.php?showtopic=252977
For Vista guide with screen shots, so far i've only flashed HardSPLv4 from inside Vista, but it worked i'm still plucking up enough courage to do a full flash of WM6
Nic
I do this (for Hard-SPL, don't know for other):
I have made what it was written on modaco (http://www.modaco.com/index.php?showtopic=252977), but
1) I was not in bootloader.
2) While active sync try to connect (but it does not succeed because they are not its driver) I've stopped WMDC.EXE and now hermes is connected.
3) NOW I do a flash.
If there is something that is not clear you say it to me.
My method also works (for me)
Can somebody confirm that my method works for vista?
soniX
I'm based also to your method, but it would be more complete to integrate it with the method on modaco.
It seems that most people didn't get the point of this thread...weird considering I put TETHERING in the subject line. However, it is nice to see people trying to help others with Vista to flash. I have the same problem myself but access to machines with XP nullify my real need for flashing on Vista for now.
I'm about to reinstall LVSW's latest ROM set for the billionth time and I'll try out tethering on that. It seems that people who were on WM6BE were having a hard time with Internet Sharing. I'll load a new rom and let you know how it goes.
Hello,
I am new to this forum, and I have read through a lot of the links and threads about this, but I have not found the answer to my question. Will these ROM Updates work on a HTC S621 that I have through Unicel? The phone is unlocked, but I dont know if that means that I still have to download the file that will unlock my phone? I am very interested and eager to upgrade my pnone to Windows Mobile 6.1, but I am honestly afraid that my inexperience with doing something of this nature will "brick" my phone and I will be without a phone. It irrates me to no end that neither HTC or Unicel are going to bother to come out with an official update for this phone, so if I want the lastest update to the phone, I have to go through unofficial channels. Could someone please tell me if this will even work for my phone before I try to do it? Thank you
Larry
Yes it will work sir, just follow the tutorial and upgrade... The tutorial is linked below in my signature... Also, as a beginner I would recommend using Ricky's rom version 24. ... if you need any help let me know okay... also, make sure you run connection setup after the upgrade...
Am I going to have a problem, or should I do something different since the instructions seem to be written for a phone on T-Mobile? I am really fretting about bricking my phone and I dont know if Unicel will do anything for me if I happen to brick the phone because I did something wrong. I would really like to try flashing the ROM on the phone to Windows Mobile 6.1, but I am just nervous, I guess. Thanks for the help and wish me luck
Larry
You should be fine if you read it over (print it out) and can follow directions. The main problems people run into are keyboard layouts and 270 errors.
No Guts No Glory
pfunkside said:
You should be fine if you read it over (print it out) and can follow directions. The main problems people run into are keyboard layouts and 270 errors.
No Guts No Glory
Click to expand...
Click to collapse
Yah exactly just read and follow instructions word for word...
nobody on this site can promise that nothing will go wrong, but it is usually determine that when something does go wrong, it is because the instructions were not being followed.
you sound a little too nervous to me to be trying this, you may want to either find someone else to do this for you, or take a deep breath, have a beer, and then dive in.
i've done this three times without an issues.
I did it to my unicel S621, and works wonderful! pm me if you need the internet settings after...
He will definitely need the internet settings... for sure...
yes, I need the internet settings please. also, how do I get rid of the "fav5" thing off the phone?
Thanks
Larry
larry.twichell said:
yes, I need the internet settings please. also, how do I get rid of the "fav5" thing off the phone?
Thanks
Larry
Click to expand...
Click to collapse
which version are you using? which rom version (i.e. are you using Rickys or Kavana's)
If you are using Ricky's go all the way down to the last thing on the homescreen which should be settings... and then scroll to the right to Chome settings and then in there you can unclick everything you do not like... everything that is bolded will show up on your homescreenv and everything not bolded will not show up..... then restart your phone and you should be on the go...
Hello,
Okay, I have successfully installed "Ricky's" ROM. I followed the steps to the letter in the newbie thread. I installed the keymapping .CAB file. My phone needs the Unicel Internet settings. I have once before reset my phone back to factory specs, which required that I have to go into the local Unicel store and get the internet settings and install them, the problem now is that I could use Wi-Fi to access the internet before with my phone, even though I couldnt through my data plan/cell service. Since I updated the ROM, I cannot even access the new through Wi-Fi. In the instructions, it states that you should run the connection wizard, but the problem is it only lists T-Mobile, AT&T, and Carolina in my phone, not Unicel. I know that the GSM partner of Unicel was bought by AT&T, but I dont want to set my phone to that because I dont know if it will screw everything up if I do.
So what advice can you offer me? Will getting the Internet Settings from Unicel or member Outragis solve all of my problems? Thank you for any suggestions! By the way, I Love the new Windows Mobile 6.1, now I just have to learn how to use it!
Thank You,
Larry
larry.twichell said:
Hello,
Okay, I have successfully installed "Ricky's" ROM. I followed the steps to the letter in the newbie thread. I installed the keymapping .CAB file. My phone needs the Unicel Internet settings. I have once before reset my phone back to factory specs, which required that I have to go into the local Unicel store and get the internet settings and install them, the problem now is that I could use Wi-Fi to access the internet before with my phone, even though I couldnt through my data plan/cell service. Since I updated the ROM, I cannot even access the new through Wi-Fi. In the instructions, it states that you should run the connection wizard, but the problem is it only lists T-Mobile, AT&T, and Carolina in my phone, not Unicel. I know that the GSM partner of Unicel was bought by AT&T, but I dont want to set my phone to that because I dont know if it will screw everything up if I do.
So what advice can you offer me? Will getting the Internet Settings from Unicel or member Outragis solve all of my problems? Thank you for any suggestions! By the way, I Love the new Windows Mobile 6.1, now I just have to learn how to use it!
Thank You,
Larry
Click to expand...
Click to collapse
Yes just private message that guy that said has the Unicell internet settings as you will need them in there and especially for receiving MMS (picture messages)... so just ask him to give them to you and I bet he will be more than happy to provide you with them.
I did PM him, I hope to hear back from him soon. I Imagine I would need to use Active Sync at home to download the updates to my phone.
Thanks for the help and advice, I am really liking the new interface!
Larry
I need Help!
Okay, so I am trying to find the files I need so that my HTC S621 that I have through Unicel to work and connect to the internet. I have contacted Unicel and they sent me a link to a file, and this is supposed to work, but it doesnt.
Here is the email:
Subject: Doing a Hard reset on the HTC621 will remove all Unicel settings
Issue/ Findings:
After doing a hard reset on the HTC S621 you will no longer have any Unicel settings and will need to reinstall them for WAP and MMS. To hard reset the HTC S621 (with the HTC S621 powered OFF) press and hold the 2 soft keys and than press the power button. Do not let go of the soft keys until you see the message to reset your HTC by pressing the send button.
Resolution:
The setting can be reinstalled into the HTC S621 by using a CAB file and a Micro SD card. The File has been posted on the internet and can be installed 2 ways.
Option 1: Active sync
From your PC go to http://www.unicel.com/devices/htsc621.html and download the zip file to your PC. Open the zip file and extract all the files within to your PC. Once this is done you should see the folder 2577 on your PC. Now connect your HTC S621 to your PC (you will need ActiveSync for this part and a memory card) and open Explore. Open “My windows mobile-based device”. Now drag or copy and paste folder 2577 from your PC to “Storage Card”. Once this is complete, unplug your device from your PC and power-cycle your device. After waiting a few seconds, you will get a prompt to do an auto-configure, press yes and your files will be installed. Once the auto-configure is complete, you will be asked to do a restart. Press yes to restart and all the settings the device had at the time of purchase should now be on the device.
After the device has power cycled, a change needs to be made to the GPRS Authentication to ensure connectivity. Please follow the steps below:
Start
Settings
Connections
GPRS
Unicel Info2Go
scroll to authentication type
CHAP
Done
End
Option 2: SD card reader
From your PC go to http://www.unicel.com/devices/htsc621.html and download the zip file to your PC. Open the zip file and extract all the files within to your PC. Once this is done you should now see the folder 2577on your PC. Now open your SD reader, with your memory card installed in the reader, drag the entire 2577 folder to the SD card. Once this action is complete, install the SD card into the S621 and turn on the device. After waiting a few seconds, you will get a prompt to do an auto-configure, press yes and your files will be installed. Once the auto-configure is complete, you will be asked to do a restart. Press yes to restart and all the settings the device had at the time of purchase should now be on the device.
After the device has power cycled, a change needs to be made to the GPRS Authentication to ensure connectivity. Please follow the steps below:
Start
Settings
Connections
GPRS
Unicel Info2Go
scroll to authentication type
CHAP
Done
End
Okay, so I downloaded the file and did what it said, but it is not auto running the file and doing anything. Is this because I upgraded the ROM and the file will not work with Windows Mobile 6.1? I am getting a little flustered and I love the new OS, but I would like to be able to use the internet on the phone. I cant even connect to the internet through Wi-Fi.
Does someone have the correct setting file for a Unicel HTC S621 that I could have to get my phone working right? I would appreciate it!
Thank You
Larry
Couldn't you just add them manually
Start - settings - then each add settings...
I'm surprised Unicel doesn't make them easier to access
This link might help but your easiest bet is getting the guy who commented to read you his.
http://www.howardforums.com/showthread.php?threadid=655672
Running out of memory?
I recently did the Kavana 6.1 upgrade on my Unicel/AT&T HTC S621. Everything is working fine except that the phone is constantly running out of memory (Which, actually, is not really fine...) Using the Free Memory app doesn't really work, as it will free only a KB or so, and it doesn't show the correct amount of RAM, in any case (usually around 5K instead of the 64K actually ob board). Any ideas?
Oh yes, and also, the phone now calls itself a C720W, which is a Dopod (Asian carrier) version of the S621... Anyone else?
Thanks,
John
Hello, everyone, I hope no piss anyone about this old OS, but I have no choice on my iPAQ Rx3115 'cause HP never releases an OS update for this pda, since it has decent features and mine is in perfect shape and it's a shame that a lot of programs cant be installed in this OS.
So, that's why i want to edit the ROM of this PDA, made a custom one with new programs and delete the old ones and the ones that are obsolete (like the MPG player, since tcmp and coreplayer cant play everything).
This forum is big, i was searching for hour about resources and "how to do that", I use EM2003 and when i try to open the rom file it tells me that enter a password to unlock the ROM.
So pleasse guys, help me out, I want to guive a full new life to this PDA and keep using it, and of course I will release the ROM for everyone to use it as I made stable ROMs.
Thanks and regards.
c'mon guys, help me a little, a need something to start with, a tool, program, anything?
thanks
I know this is old but I'd just like to second this, if anyone has any info on how to upgrade this device that would be great as I just sort of "stumbled upon" one of these and would like to put it to good use.
I've done a lot of searching and can't find any roms for rx3115 IPAC. I have one of these too and would love to fiddle with it again!! I even found on forum that said that it would not support WM 5 or 6 so I don't now if there is much hope. But if there was a program or instructions on how to make our own ROM I would sure like to try!!! I believe it has WM 2003 CE on it now...
Me too!!! I too have one of those...
rx3115
I have an rx3115 also. I am following this thread.
This will be quite difficult and complicated, first of all, what do you want to do with stock ROM? If some apps can't be installed on WM2003SE, then adding them to ROM won't change anything. However, I'm willing to help, send me a PM with stock ROM and changes you want, I'll try to develop somethin' good .
Thanks tomcug!!!
I'll also PM you the links from this post.
I too have an rx3115 and have been searching all over for ways to upgrade it: cooked ROMs, Linux, Unix... SOMEthing. LOL
So far you're the only cook who's wanted to take a swing at this. There are no easy answers for rx3115 that I can find anywhere on the net.
Here's the last official rx3115 update of WM2003 (1.01.11) complete with installer
http://www.mediafire.com/file/i6k0935chhkgzlh/iPAQ rx3115 ROM 1_01_11.exe
I'd hate to lose the Nevo (IrDA universal remote control) from it, but would sacrifice that if I could upgrade the OS...
Better yet - maybe you could work with this WM 6.1 Classic ROM that was cooked for the rx1950. It supports the ARMv4T instruction set used by the rx3115. Here is just the .nbf file
http://www.mediafire.com/file/iu9p815w3yjpy6h/CEOS.nbf
At 27.82mb it would just fit on rx3115. Maybe a slimmed down version??? I would leave it to you to decide what to remove. LOL who am I to tell a cook how to season his offering???
And the WM 6.1 install cab for Mobile Office
http://www.mediafire.com/file/nmz3sbyuxan7c4e/office_wpc_WM6.CAB
Of course - any help would be greatly appreciated by many rx3115 owners.
And here's my thread of what I've been trying to accomplish with my rx3115.
http://forum.xda-developers.com/showthread.php?t=981868
Thanks Again,
RumoredNow
All right, then I'll try to do something good . I don't know if this will work and that's why I need to ask you one more thing. Is it possible to flash this phone when it's not booting? I mean windows hangs.
It's a straight Pocket PC with no Phone capability. Full specs are here:
http://www.pdadb.net/index.php?m=specs&id=122&view=1&c=hewlett-packard_ipaq_rx3115
Short answer: yes, the ROM is user flashable up to 28mb of 32mb total.
Long Answer...
The HP update I sent you will flash the ROM under Win XP with ActiveSync installed. The RUU (ROM Update Utility) needs RAPI.dll from ActiveSync in order to run. It won't function under Win 7 for me - it generates a comm error.
Theoretically it is possible to flash any (size appropriate) ROM to the device with this Universal iPAQ Bootloader:
http://sourceforge.net/projects/ubl/files/ubl/Binaries/
My system flagged the UBL as having a Worm in the Vista Drivers though. I can't tell if it is a false positive (I'm not qualified for that) so I didn't use it under Win 7.
Instead, I stripped out the infected(?) bits and tried it on an XP box. Here's that file:
http://www.mediafire.com/file/7anraar1tkc3lz1/BootLoader.rar
It fails to put rx3115 into bootloader mode even though it connects via USB.
There is a manual way to put rx3115 into Bootloader mode: MultiMedia (button 1) + iTask (button 4) + Power + Reset. But every time I put it in Bootloader mode manually, that seems to kill the rx3115's USB port. It becomes invisible to PC... I don't know if there is another step to manually enable USB mode under Bootloader. I haven't been able to find the right button(s) for that so far...
And manually entering Bootloader mode hasn't allowed me to flash from SD card either. I always get a "Wrong Image" error, even with .nbf file from the last official update!!!
I know it's not the device - I can reflash the last update over USB on a Win XP box if I use the official update package.
LOL - an executable which uses HP's RUU would be preferable for technologically deficient users such as myself.
Feel free to PM me or post back here if you have any more questions.
Thanks again.
Well, no progress at the moment and probably there's won't be any progress at all. I don't know how to extract CEOS.nbf, all tools I've tried can't do it.
By extract, do you mean view and edit???
uedit32 (hex editor???) will open it and allow changes to be saved. It even keeps the original version as a backup...
http://www.mediafire.com/file/6r8ffn1fq3bh9mu/uedit32.exe
Making ROM with hex editor ? That would take hundreds of years or even more . What I need is a tool or set of tools that can extract XIP and IMGFS from CEOS.nbf, that's the way you make ROM's. And tools I've tried doesn't work for this phone, however they work for HTC and i-mate phones I own.
EDIT:
I've also tried rx1950 kitchen, but it's a fail too. There are tools there but only for making CEOS.nbf from XIP and IMGFS images, nothing what I need .
Looking for the 802.11g mod for rx3115
I saw an experimental mod somewhere to enable the rx3115 to use 802.11g. If anyone knows where it is, please share. I lost the link. I was looking up the embedded chips at the time I saw it, so I think it was a forum.
All right, making a little update here. After long time of hard work I need to say that it's impossible to make WM 6.5.3 ROM for this device, drives and OEM stuff from WM 2003 SE simply won't work with any newer OS. Sorry for that but there's nothing we can do .
Just got the Verizon Touch Pro 2 and am trying to install a few third party programs like:
List Pro
Magic Button
Splash ID
Memaid
I connect my device when trying to install, it says to check my mobile device screen to see if further steps are needed, but nothing is showing and nothing is happening.
Can someone please advise?
Thanks so much!
Cat
CatB said:
Just got the Verizon Touch Pro 2 and am trying to install a few third party programs like:
List Pro
Magic Button
Splash ID
Memaid
I connect my device when trying to install, it says to check my mobile device screen to see if further steps are needed, but nothing is showing and nothing is happening.
Can someone please advise?
Thanks so much!
Cat
Click to expand...
Click to collapse
And you're sure that the apps didn't end up showing up in your programs list?
First, when you plug your phone to the PC, does it show any other signs of conenction? You should first get an option on the device screen to choose between "disk drive" and "active sync"...when you're installing apps from your PC desktop to the phone, you need to be connected via the active "active sync" option. Once you are, you'll see either Active Sync (on XP) or Windows Mobile Device Center (on Vista/7) open on your desktop. You may have already gotten that far, I just wanted to make sure you're connected properly that way.
The next thing to try would be to install the apps straight from the phone, instead of via the PC. To do that, just connect the phone via "disk drive" option, copy the .cab file over to the phone (on to the SD card is best), and just run it from there to install straight to the phone. Running the desktop .exe installer just automates that step for you, but otherwise it's the same process. Running the .cab file from the phone bypasses any possible issues with the active-sync connection.
I've attached the .cab for the memmaid app here, try that one first.
sirphunkee said:
And you're sure that the apps didn't end up showing up in your programs list?
First, when you plug your phone to the PC, does it show any other signs of conenction? You should first get an option on the device screen to choose between "disk drive" and "active sync"...when you're installing apps from your PC desktop to the phone, you need to be connected via the active "active sync" option. Once you are, you'll see either Active Sync (on XP) or Windows Mobile Device Center (on Vista/7) open on your desktop. You may have already gotten that far, I just wanted to make sure you're connected properly that way.
The next thing to try would be to install the apps straight from the phone, instead of via the PC. To do that, just connect the phone via "disk drive" option, copy the .cab file over to the phone (on to the SD card is best), and just run it from there to install straight to the phone. Running the desktop .exe installer just automates that step for you, but otherwise it's the same process. Running the .cab file from the phone bypasses any possible issues with the active-sync connection.
I've attached the .cab for the memmaid app here, try that one first.
Click to expand...
Click to collapse
Thanks so much for the reply! I actually managed to get the programs installed via my ActiveSync connection - finally! Not sure what the problem was before.
I plan on keeping your instructions, though, in case this happens again. Thanks so much for the reply.
CatB said:
Thanks so much for the reply! I actually managed to get the programs installed via my ActiveSync connection - finally! Not sure what the problem was before.
I plan on keeping your instructions, though, in case this happens again. Thanks so much for the reply.
Click to expand...
Click to collapse
No problem, glad to help As long as you got it working, that's what matters! Feel free to come back if you need any more help.
sirphunkee said:
No problem, glad to help As long as you got it working, that's what matters! Feel free to come back if you need any more help.
Click to expand...
Click to collapse
I will, believe me! In fact, I have only had my TP2 for about 3 days but have a few "issues" going on, so I will start a new thread and am looking forward to getting some help.
I love support forums! They rock
I have seen many people asking about bitpim and the kin phones and many with no solutions or answers to their questions. It IS possible to use bitpim to view the file system with these devices. I haven't seen any tutorials on how to do it so I've decided to post a step by step guide.
The things you will need:
Kin Two or Kin TwoM(I have not been able to test this on a Kin One or OneM)
A micro usb data cable
Bitpim
Drivers for the Kin available below
http://rapidshare.com/files/439206164/KinPixiPreCentroTreo800w_etc_DiagDrivers.zip
Don't worry about fixing the error in the qcser.inf, since I have already done this for you.
I would like to thank jennydevil for reminding us that these drivers are for 32-bit not 64-bit operating systems.
Step 1
On your kin device go to the phone application. Once there dial ##77647266488 and call. It will ask you for your Service Programming Code. The default code is 000000. You will now be in a menu labeled "SETTINGS". Navigate to OTHER and then swipe to the left. Here you will see PPro, USB Pass-Through, and USB VID Stream. All of these options will be off. You will want to turn USB Pass-Through on.
Step 2
Now connect your phone to your Windows PC. Your pc will try to find a driver called "Pink CDMA diagnostics" and will fail. Fear not. Open the start menu and right click on Computer then Manage. On the menu to the far left click device manager. In other devices you will see the Pink CDMA diagnostics. Right click it and press "Update Driver Software". Click "Browse My Computer for Driver Software". Browse for the location of the drivers downloaded earlier and click next. It will show a warning that the drivers are not signed. Continue anyways.
Step 3
Now you are ready to open up bitpim. Set it to the same COM as the phone and make sure in the View menu that View Filesystem is checked. Now feel free to browse through the file system of your kin.
If you run in to any problems feel free to ask questions. If you have any ideas or information to make this tutorial more useful feel free to speak your mind.
Fantastic!!
This is a great start to making our kin experience much better! Thank you, and keep up the solid work! Your friends at Microsoft Kin Forums thank you aswell! Check our sites for updates that could help, and together we can make KIN the phone it truely can be!
social.answers.microsoft.com/Forums/en-US/pmxphone/threads
link to MS kin forums (gotta add http)
Thank you for putting the tutorial together (and posting the pre-fixed drivers)! In case anyone else runs into the same hiccup I did - the drivers are for 32-bit OS, not 64-bit OS. Once I used the right system, the drivers and BitPim worked like a champ.
Thanks again!
I can see filesystem
Hey thanks, I can see the filesystem, I think? It says nothing is detected when I manually set the phone. I cannot "get phone data" but can read the filesystem.
.efs_private
CGPS_ME
CGPS_PE
DMU
...etc
But what does this all mean? Can I access ringtones/sounds to edit the list? Please all I want is to add and delete ringtones! Ugh why is this so difficult. Anybody know how to do this?
sabernat said:
Hey thanks, I can see the filesystem, I think? It says nothing is detected when I manually set the phone. I cannot "get phone data" but can read the filesystem.
.efs_private
CGPS_ME
CGPS_PE
DMU
...etc
But what does this all mean? Can I access ringtones/sounds to edit the list? Please all I want is to add and delete ringtones! Ugh why is this so difficult. Anybody know how to do this?
Click to expand...
Click to collapse
No at the moment you can't do that with BitPim but you can email a ringtone to your phone.
Help in step two
Can not find driver location on Windows Vista. I can get to Windows32 file/ then to driver file but new downloaded drivers as in step two.
Thanks
Ah ok, dang. Problem is...Kin has no function to delete ringtones. So once its on, its on forever. I just can't commit to that.
Moved to KIN two forum and stickied.
Also, fix the rapidshare link, the file seems to be unavailable.
jekikeyes said:
Can not find driver location on Windows Vista. I can get to Windows32 file/ then to driver file but new downloaded drivers as in step two.
Thanks
Click to expand...
Click to collapse
Download the drivers extract them somewhere like a folder on your desktop. Let's call the folder kindrivers. Then when you are browsing to the files you would go to C: (or the drive vista is located on)/Users/Yourusername/desktop/kindrivers
Hope that helps.
Any chance we'll be able to get 64-bit drivers soon?
activesack said:
Any chance we'll be able to get 64-bit drivers soon?
Click to expand...
Click to collapse
Not unless someone wants to take the time to write them.
After trying it myself I am not convinced that "we" are seeing anything. It states no phone is connected. There are no signs that I see anything from the phone. Keep trying and keep posting.
dezgrz said:
Not unless someone wants to take the time to write them.
Click to expand...
Click to collapse
someone please do
Kin_Two 2
I am at a lost, I did all the steps, plus the driver download. Everything went fine. I can see what port the phone is using, and have it set on bitpim. When I go to detect the phone on bitpim, it can not find the phone. Have tried on two different computers and can not get it to work. Bitpim can not find the phone, any thoughts?
Ron
phoneinu said:
I am at a lost, I did all the steps, plus the driver download. Everything went fine. I can see what port the phone is using, and have it set on bitpim. When I go to detect the phone on bitpim, it can not find the phone. Have tried on two different computers and can not get it to work. Bitpim can not find the phone, any thoughts?
Ron
Click to expand...
Click to collapse
Bitpim won't find the phone you have to manually set it to the correct COMM port.
I found the com port in device manager. It has been set, but it says it can not still detect phone. When I do go to settings in bitpim, I go to Verzion Wireless, Motorola, and then Kim? Is that correct, there is no Kin just Kim,so is that the same thing?
Ron Fone
phoneinu said:
I found the com port in device manager. It has been set, but it says it can not still detect phone. When I do go to settings in bitpim, I go to Verzion Wireless, Motorola, and then Kim? Is that correct, there is no Kin just Kim,so is that the same thing?
Ron Fone
Click to expand...
Click to collapse
It won't detect it. Just show the file system. Just set it to other cdma.
Hey, I'm about to be forced to get the Kin TwoM (its the best phone on Verizon without a data plan). Has there been any progress on the ROM dumping front? It seems like you would know. Thanks...
Just wanted to post in here saying that I just got myself a Kin TwoM this weekend without knowing anything about it's limitations or potential. I got it working with BitPim using this tutorial, but... yeah, I have no idea what to do now. I'll certainly be watching this board for anything cool that comes of this, though!
Well I have had my Kin Twom for more then a week. I am probably going to return it, its a shame because it is not a bad little phone. Microsoft and Verizon will be the death of this thing. Know what to do about my cell phone?
Ron