I have set my Dash to 240MHz from i guess the standard 201MHz, however it doesn't seem to be any faster. I've tried multiple tasks at the same time and I just can't feel a difference in speed.
On the system info it always shows 201MHz regardless to what clock i set it. I also don't notice a difference in battery consumption.
How can i check if the Dash is indeed OCed that what I set it to?
daleksic said:
I have set my Dash to 240MHz from i guess the standard 201MHz, however it doesn't seem to be any faster. I've tried multiple tasks at the same time and I just can't feel a difference in speed.
On the system info it always shows 201MHz regardless to what clock i set it. I also don't notice a difference in battery consumption.
How can i check if the Dash is indeed OCed that what I set it to?
Click to expand...
Click to collapse
The only way is to look at OMAPClock I do believe.
daleksic said:
I have set my Dash to 240MHz from i guess the standard 201MHz, however it doesn't seem to be any faster. I've tried multiple tasks at the same time and I just can't feel a difference in speed.
On the system info it always shows 201MHz regardless to what clock i set it. I also don't notice a difference in battery consumption.
How can i check if the Dash is indeed OCed that what I set it to?
Click to expand...
Click to collapse
The only way I know is to go back into OMAPClock and check what setting you have it on. I don't know of a way to see the current clock settings. I can say this-- Your phone's speed greatly depends on the number of applications and programs you have running simultaneously. If you have a lot of stuff going on at once, then you may not notice the difference in speed from 201mhz because the 240mhz is absorbing all of this activity. I noticed a change in my phone's speed when I first o/ced it (significant enough for me to notice a difference), but after a while my S620 became loaded down with all kinds of programs as I began exploring the wonderful world of modding. Now it runs at a decent speed.
I keep my phone very light. Only on there what I really use. The OMAP says 240. I'll keep it at 240 for now and see what happens. If I can see reduced Battery life over the next few weeks I guess it must be working. I'm not sure if I can go 1 step higher.
My old dash burned out on a hot Florida Spring day with a (I believe 252 OC). So I'm also kinda worried about the heat (internal/external), but as far as I read everything should be just fine at 240MHz.
you can benchmark it using sktools
Please give path to the OMAPClock? Thanks!
runningerin said:
Please give path to the OMAPClock? Thanks!
Click to expand...
Click to collapse
Start -> Accessories -> OMAPClock
you can also just open up tcpmp player and go to options > settings. it wil show your clock speed
Thanks! I found it in tcpmp!
runningerin said:
Thanks! I found it in tcpmp!
Click to expand...
Click to collapse
It runs stable at 240MHz
I have read every thread I could find on overclocking the Dash here in xda. I have T-Mobile 6.0 Standard and would like to overclock. Could some helpful person please tell me which program(s) I need to do this? I'm assuming OMAPClock (which version?) and anything else? My Dash is app unlocked already. Thanks in advance!
wm6.1 coming with a lot of feature inside how omapclock, install it.
runningerin said:
I have read every thread I could find on overclocking the Dash here in xda. I have T-Mobile 6.0 Standard and would like to overclock. Could some helpful person please tell me which program(s) I need to do this? I'm assuming OMAPClock (which version?) and anything else? My Dash is app unlocked already. Thanks in advance!
Click to expand...
Click to collapse
I'm not quite ready to upgrade to WM 6.1 with some problems I've read about. I did, though, download OMAPCLock and it works great! The small problem is that it is buried in File Explorer, and I would like a shortcut on the Start Menu. Not being a programmer (like most of you), I don't know what "arguments, file paths, etc." are. I can't copy and paste to Windows\Start Menu cuz it won't let me. Is there another way without getting Total Commander cuz I don't really want to keep adding programs to my Dash that aren't absolutely necessary?
Never mind. The Surreal Networks OMAPCLock app gives me the Start Menu shortcut and Homescreen Icon. The first OMAP program I dl'd was from freeware.com and will not delete. It says there is a sharing violation. Anyone know how I can get it off my phone?
Related
Hi
Is there an area on the xda2s where you can maximise your processor speed? On my old Dell x3 you could choose 'max perfromance' or 'conserve battery' etc.
It's just for a 400mhz product it gets quite slow sometimes..........
Apologies if this has already been asked....I did search for it but couldn't find anything...
Thanks in advance,
HPJ
HPJ said:
It's just for a 400mhz product it gets quite slow sometimes..........
Click to expand...
Click to collapse
Your right for a 400Mhz it's sometimes slow ... d'ont understand it ...
My previous device was a 400Mhz aswell, and was much faster.
Maybe it has something to do because it has a build-in phone?
Have you tried
http://www.handango.com/PlatformPro...4§ionId=3287&catalog=30&topSectionId=3274
won't it damage the cpu of our pda?.
regards
Not if you dont push it too far! It defaults to 472MHz max, you can switch off this limit and take it further. Mine is stable at 472MHz, never tried to take it further. Overclocking generally wont damage the CPU unless you are daft. As a rule, the PDA will just crash if you take the clock speed too far. The crash may mean a hard reset if you are unlucky!
In short you can kill the proc through overclocking, but its unlikely.
One point to note is that the 'auto scale with cpu load' option on xcpuscaler is a load of [email protected] Does not seem to work at all.
I mainly use xcpuscaler to slow down my proc to 200MHz, dont need 400 MHz to read avantgo or an ebook, or listen to an MP3, but running at 200MHz does give a reasonable increase in battery life.
Nigel
I have installed the xcpus..., do I configure it so that it varies the speed automatically, but is it always constant to 400 mhz??
does somebody know because??
thank you
XCPU2.85
Anyone has a copy of XCPU2.85 which is not trial version. Mine has expired.
2.82 does not work in 2nd edition.
Try using Pocket Hack Master from Anrom Tomov. Runs good on the QTEK 9090. See www.handango.com
A little note
Dunno if any of you realize this but be careful should you decide to remove pocket hack master..
i noticed that it does not clear the registry of its CPU settings... i found this out by uninstalling the software (after setting cpu speed to 472)... and when i reinstalled it again.. the software defaulted to 472 mhz..
make sure you go to the registry to get rid of some of the settings... just do a registry search for anton and remove the reg entries..
sorry if you guys already know this.. and i don't know if left behind registry keys mean anything if the software is not active but better be safe than sorry right? and i'm a noob here so just trying to help out
Hi Artemis owners. I want to know if any of you has tried the various overclocking versions of omapclock on your device. I just cancelled my order for trinity and paced one for artemis. Initial decision to go for trinity was more for speed, but I just changed my mind.
Do we still need to dope this gadget for speed?
Victor
Yeah.. this is an almost perfect device for me.. but the speed turns me off. Someone told me it works faster than a stock 416Mhz device after overclocking it... and he used an 818pro before.
So victor.. you've used the 818pro.. what are your views on the OMAP processor?
The battery statusand omap clock program by Ikarius in the prophet section was super on my prophet. Now that he has added onto it I believe it would be even better
Victor
The weak processor is also a big turnoff for me in this phone. The Spb Pocket Plus today screen with the large icons I think is perfect for the mouse, but it seems the Artemis cant even handle it at times.
Neptune said: [The weak processor is also a big turnoff for me in this phone. The Spb Pocket Plus today screen with the large icons I think is perfect for the mouse, but it seems the Artemis cant even handle it at times.]
Have you overclocked?
victoradjei said:
Neptune said: [The weak processor is also a big turnoff for me in this phone. The Spb Pocket Plus today screen with the large icons I think is perfect for the mouse, but it seems the Artemis cant even handle it at times.]
Have you overclocked?
Click to expand...
Click to collapse
No but i'm going to try that right now. Any suggestions...
neptune said:
No but i'm going to try that right now. Any suggestions...
Click to expand...
Click to collapse
Please do try and multitask after/before overclocking and compare the difference..
Stuffs like keep your MP3s playing in the background while running tomtom or surfing the net. Let us know if you notice any unacceptable lag. Thanks!
Has anybody overclocked yet???
Overclock Artemis (P3300)
I overclocked it and using it for the last twodays. Used omapclock @ 252mhz, no problems so far.
My experience is the same as Cavadias, I have been using my Orbit with Omap clock running at 252MhZ and it works fine with applications such as TOM TOM 6 and push mail in the background.
Cheers
LB
Lord Buckingham said:
My experience is the same as Cavadias, I have been using my Orbit with Omap clock running at 252MhZ and it works fine with applications such as TOM TOM 6 and push mail in the background.
Cheers
LB
Click to expand...
Click to collapse
In that case, those who do not need UMTS have an alternative to Trinity if speed is the main deciding factor
To clarify I used the Omapclockplus v0.0.4 continuous overclocking for your wizard (See threat). It works.
I've overclocked compact 3 to 252MHz, it's stable to run tomtom6, as 262MHz cannot run tomtom, but other programs is OK. If using file explorer to opened windows, it was almost need 45sec to explore all files as normal MHz, when overclocked to 525MHz it will be fasted about 10 sec.
new-boy said:
I've overclocked compact 3 to 252MHz, it's stable to run tomtom6, as 262MHz cannot run tomtom, but other programs is OK. If using file explorer to opened windows, it was almost need 45sec to explore all files as normal MHz, when overclocked to 525MHz it will be fasted about 10 sec.
Click to expand...
Click to collapse
I overclocked it for the last three days(Dopod P800W). Used BatteryStatus omapclock @ 286mhz, no problems so far.
Can you feed back on battery life with your 286, and usage: whether normal phone use or gps navigation?
new-boy said:
I've overclocked compact 3 to 252MHz, it's stable to run tomtom6, as 262MHz cannot run tomtom, but other programs is OK. If using file explorer to opened windows, it was almost need 45sec to explore all files as normal MHz, when overclocked to 525MHz it will be fasted about 10 sec.
Click to expand...
Click to collapse
There is a known issue here with the windows file structure so even if the device is not over clocked this folder will take ages to display the contents. Using resco explorer seems to be quicker !
Cheers
LB
ivan12 said:
I overclocked it for the last three days(Dopod P800W). Used BatteryStatus omapclock @ 286mhz, no problems so far.
Click to expand...
Click to collapse
Ya managed to get the Dopod already? Seems to be it's only avail in China and Taiwan. Still waiting for it's launch in Singapore.
May I know whats the AKU version of your device? Thanks!
Guys.. I got a quick question..
When using BatteryStatus.. if the plugin is active under my Today settings, but under options, I untick the "show splugin"
Does it mean my device is still being overclocked? Any other methods to check if it's running at full throttle?
Thanks!
I have been overclocking at 232 and it works fine. Judging from what others' say I could probably push it higher.
I would also like to know if the program works in the background even when it is not set to sho on the today screen.
MasK said:
Guys.. I got a quick question..
When using BatteryStatus.. if the plugin is active under my Today settings, but under options, I untick the "show splugin"
Does it mean my device is still being overclocked? Any other methods to check if it's running at full throttle?
Thanks!
Click to expand...
Click to collapse
If you have TCPMP installed, you could check the clock speed in TCPMP's general settings page when you have the BatteryStatus plugin hidden. This tends to report slower speeds than Omapclock, but at least you will see if there is a difference. (Mine says 240 in Omapclock and 225 in TCPMP). Good luck.
Is there a preferred tool/utility that's compatible with wm6 (if it matters?) that will let me overclock my hermes?
aliencurv said:
Is there a preferred tool/utility that's compatible with wm6 (if it matters?) that will let me overclock my hermes?
Click to expand...
Click to collapse
The only one I know of that works is pocket hack master
http://www.wizcode.com/products/view/pocket_hack_master
Have fun
Chris
I was under the impression that the Hermes wasn't really overclockable...
I played with the trial version of Hack Master, I set it up under/over clocked. I got some screen flicker when underclocked below 300mhz otherwise it seemed like it worked, I didn't try any benchmarks though. Give it a try. I'd be surprised if it doesn't work for you.
I don't know about WM6.1 though. I tried it on WM6
Chris
noellenchris said:
I played with the trial version of Hack Master, I set it up under/over clocked. I got some screen flicker when underclocked below 300mhz otherwise it seemed like it worked, I didn't try any benchmarks though. Give it a try. I'd be surprised if it doesn't work for you.
I don't know about WM6.1 though. I tried it on WM6
Chris
Click to expand...
Click to collapse
sweet thanx chris . i'll give it a benchmark and see how it works
I have seen somewhere that when you overclock hermes the bluetouth will not work.
aliencurv said:
sweet thanx chris . i'll give it a benchmark and see how it works
Click to expand...
Click to collapse
there is no way to overclock hermes. the procesor change it speed accord the needest of procesing. the can vary trougth 100 to 400 mhz. the hacker master software only show the speed but it doesn't change it on the procesor. this is the best way to safe battery power, cause less speed >>> more battery.
sorry about my english, i speak spanish
Kc SN said:
there is no way to overclock hermes. the procesor change it speed accord the needest of procesing. the can vary trougth 100 to 400 mhz. the hacker master software only show the speed but it doesn't change it on the procesor. this is the best way to safe battery power, cause less speed >>> more battery.
sorry about my english, i speak spanish
Click to expand...
Click to collapse
So your saying you can under clock with Hack Master, but it actually doesn't over clock above 400? I know it underclocked my hermes as I could see the screen flicker change with lower MHz. I'm gonna have to install their newest vers. and try some bechmarks. Unless aliencurv gets some results....
I can see that it would save battery with the underclock...
Chris
noellenchris said:
So your saying you can under clock with Hack Master, but it actually doesn't over clock above 400? I know it underclocked my hermes as I could see the screen flicker change with lower MHz. I'm gonna have to install their newest vers. and try some bechmarks. Unless aliencurv gets some results....
I can see that it would save battery with the underclock...
Chris
Click to expand...
Click to collapse
you cant change the procesor speed with any software. hack master only show you the speed that you have configured to change clock, but actually doesnt do anything.
the procesor speed is managed by itself.
Kc SN said:
you cant change the procesor speed with any software. hack master only show you the speed that you have configured to change clock, but actually doesnt do anything.
the procesor speed is managed by itself.
Click to expand...
Click to collapse
Try loading the trial version and drop your processor speed to 200mhz and see and feel the drop in speed. Your screen will flicker too. Is it changing something else. I know last summer it didn't support the samsung processor, but it is now listed and it definitely does something to my hermes...
Chris
Search In Hermes Forum
Do a Google search in the Hermes forum and you will find a thread that was dedicated to this subject. I believe the conclusion was that, at best, one of the applications to overclock could be increased by, at most, 10% before resets were required. That may have changed with the release of version 4.3? of Pocket Hack Master this past January.
Hi folks!
How can the HTC Hermes overclock. Did it with some tools tried, but rather less successful. Batteerystatus no, xcpuscalar, overclocked but not really at 472-500 MHz. And with the PHM I can overclock well, but then does my GPRS connection to the Internet no longer work.
Is there a way to change this?
Translated by Google
This has been gone over numerous times and no, you can't overclock the Hermes reliably....
f21270 said:
Hi folks!
How can the HTC Hermes overclock. Did it with some tools tried, but rather less successful. Batteerystatus no, xcpuscalar, overclocked but not really at 472-500 MHz. And with the PHM I can overclock well, but then does my GPRS connection to the Internet no longer work.
Is there a way to change this?
Translated by Google
Click to expand...
Click to collapse
i overclock before to 500mhz using XCPUScalar
ov2rey said:
i overclock before to 500mhz using XCPUScalar
Click to expand...
Click to collapse
Is it reliable?
f21270 said:
Hi folks!
How can the HTC Hermes overclock. Did it with some tools tried, but rather less successful. Batteerystatus no, xcpuscalar, overclocked but not really at 472-500 MHz. And with the PHM I can overclock well, but then does my GPRS connection to the Internet no longer work.
Is there a way to change this?
Translated by Google
Click to expand...
Click to collapse
Although it is possible to overclock Hermes it cannot be done relyabily or without damaging the CPU...
Some utilities may allow an active and practical overclock but I wouldn't advise it...
As you may know, if wou want your Hermes to be more responsive, performant, you can increase your ROM page pool size prior to flashing.
Cheers.
it might not be able to overclock.. but, should be able to keep the cpu locked at 400mhz and not throttle to lower speeds.. which would make it much more responsive.. I've been meaning to test this
Black6spdZ said:
it might not be able to overclock.. but, should be able to keep the cpu locked at 400mhz and not throttle to lower speeds.. which would make it much more responsive.. I've been meaning to test this
Click to expand...
Click to collapse
The CPU is always at 400mhz. Wtf are you talking about?
no its NOT always at 400Mhz.. it has auto speed scaling built in. something is not right with both tcpmp and gxmark benchmarks.. using the newest PHM I manually set the lowest possible speed of 251Mhz, and disabling built-in scaling thinking of past knowledge that it doesn't do anything to our devices. I should not see any difference right? well visually it is MUCH slower than setting it at 400Mhz with both programs showing the same score at both speeds.. this CANNOT be correct.. I can see it with my eyes a night and day difference.. 420 seemed stable but the scores were showing slower than factory clock.. whats going on here?
this has been gone over so many times in the forum its not even funny any more.
use the search facility...
yes I know, I've read the overclocking threads from two years past.. ever considered newer software might change things? It does identify the processor correctly as a S3C2442A. I still want to know the answer to why benchmarks aren't reporting correctly.. BTW this thread should be moved
here are some results.. with a fresh boot I loaded a 39306KB AVI movie in CorePlayer 1.2.4. I ran its benchmark and also timed it with a stopwatch. The benchmark reported 1.60Mbit/s @ 3 Minutes and 21 seconds, also correct on the stopwatch. 321994752 bits divided by 201 seconds comes out to 1.601 Mbit/sec just like their calcs. Now I opened pockethackmaster 4.33 and set the clock to 420Mhz and reran the coreplayer benchmark. Here's the wierd part, the test reported that it took 4 minutes and 2 seconds with a 1.33Mbit/s rate but in actuality it only took 2 minutes and 58 seconds according to my stopwatch. Do the match, thats 1.809 Mbits/sec real throughput. So overclocking DOES work.. pretty significantly if I might add, but it appears that the timers used in these benchmarks are skewed and not reporting accurate numbers. Someone else try some tests and back me up here.
silly post ;0
When i get a tilt I want to overclock my hermes 100 to 900MHZ and see how fast it will melt!! Just kidding
joshkoss said:
When i get a tilt I want to overclock my hermes 100 to 900MHZ and see how fast it will melt!! Just kidding
Click to expand...
Click to collapse
I tried to overclock my oven but after that it keeps buning all my food
Is this process reverseable?
I need too cook a roasted chicken tonight and i will get nothing but a pile of coal...
Please help me!
I searched both the forum and the wiki but couldn't find any answer.
Cheers.
Kevlar-Source said:
I tried to overclock my oven but after that it keeps buning all my food
Is this process reverseable?
I need too cook a roasted chicken tonight and i will get nothing but a pile of coal...
Please help me!
I searched both the forum and the wiki but couldn't find any answer.
Cheers.
Click to expand...
Click to collapse
Just take it out really fast, lol.
6 months ago, i tried to overclock my hermes and then it was broken. i mean touch screen cant be touched=)) but i dont know is it about overclocking. just share my experiment
Kevlar-Source said:
As you may know, if wou want your Hermes to be more responsive, performant, you can increase your ROM page pool size prior to flashing.
Cheers.
Click to expand...
Click to collapse
But then you lose Ram, and when you only have 30 or so mb's of it to start its a crapshoot.
sure, it might make some of your videos or games faster but you'll most likely have problems with any data connection
PHM can brick your phone to an irreversable state, and xcpuscalar falsely shows an increase in processor speed. Battery status will not work for the hermes, and I don't think there is a program that will overclock a hermes CPU. As for the not constantly running at 400mhz, that is not a bad thing. Think of it as a P.C., when you are not running apps, there is a system idle process that occupies the majority of the processor, meaning that not all of the speed is utilized. If this is the case, that means that the processor is not running at full speed. Same goes for the Hermes, however there is no system idle process, just a slower clock speed. When you open an app it will reach, but not go over 400mhz.
pleas see attached zip file
this program give you the ability to overclock the hermes up to 420Mhz
i tested it - and at 420Mhz the device becomes slower and some minor flicks of the screen
i went back to 400Mhz and the device went back to usual operation
regards
edward
I too have tried various clock speeds but at the end of it all i left it default as the device was too unstable.
Also I have of course continue my attempts to overclock Hermes, but I am no satisfactory conclusion. At the moment I use xcpuscalar have all possibilities of tuning 500mhz switched on and it is stable. A benchmark I have not done, so I do not know exactly whether he has speed. But the belief puts mountains.
translated by Google
Have anyone tried this app on Blackstone?
Some reports from other forums indicate much better performance after using this app.
SpeedBooster
Maybe we can find out what settings, if any, improves the performance.
I'm going to install now...
-----------------------------------
This my default benchmark before any altering.
onkolog Lite Rom
SanDisk 8Gb Class4
Tried to alter some settings, but so far only getting lower score on benchmark. Will continue to try though....
No video results.
When I tried to do the same as in the demovideo, I got lower benchmark ??
Count me in!
got the same results as the above (test done immediately after a soft reset).
played around with settings and benchmarked again. no matter what i did the results were worse than the original ones.
tried to restore the default ones with no success and had to restore from backup in order to have the best results i obtain with my original settings.
the only good thing:
-benchmark
addons:
-strip battery (very similar with the one found in the forum).
-"real close" button is overlaping the existing one.
-hack battery (make the battery last longer), not tested.
my conclusion: to uninstall it....fast..
Same Experience here.
I managed to get just slightly better benchmark.
The other tools I already had.
No point installing this.
I'm getting rid of it also.
Hi
Hello,
I'm lucky because when I install is
soft and then he did not want to get started, so then I tried not to know
why and how.
In any case thank you for the info I do not regret not working with me ...
A more
KukurikU said:
got the same results as the above (test done immediately after a soft reset).
played around with settings and benchmarked again. no matter what i did the results were worse than the original ones.
tried to restore the default ones with no success and had to restore from backup in order to have the best results i obtain with my original settings.
the only good thing:
-benchmark
addons:
-strip battery (very similar with the one found in the forum).
-"real close" button is overlaping the existing one.
-hack battery (make the battery last longer), not tested.
my conclusion: to uninstall it....fast..
Click to expand...
Click to collapse
Would agree, uninstall this!!
Fallen Spartan said:
Would agree, uninstall this!!
Click to expand...
Click to collapse
i bet the ppl from teksoft are crazy about us!
KukurikU said:
i bet the ppl from teksoft are crazy about us!
Click to expand...
Click to collapse
lol
Getting your program slammed on xda is probably the worst thing that can happen...
try again
sony xperia benchmark with SB 2.0.020.
cab here.
Guys, I think you're not using it correctly.
The benchmark measures the Hardware performance, but according to their website, you can't get more power out of nothing, the tool is to give more power to the apps you need, and take it from those you're not using that much.
Ex: when using GPS you don't care about other apps, you want the GPS to load faster.
Read more here.
For me it proves to be a useful tool, I'll test it more the next days.
Did it help?
HGLevitator said:
Guys, I think you're not using it correctly.
The benchmark measures the Hardware performance, but according to their website, you can't get more power out of nothing, the tool is to give more power to the apps you need, and take it from those you're not using that much.
Ex: when using GPS you don't care about other apps, you want the GPS to load faster.
Read more here.
For me it proves to be a useful tool, I'll test it more the next days.
Click to expand...
Click to collapse
Yepp, he (or she)'s right! And it does make a difference!
To find out for yourself, download the app and run it (it will run in demo mode, which is sufficient to see the difference in the following test). Open the processes screen, find the gwes.exe process and tap the minus button on the left until it has the lowest possible priority. Hit ok and open the windows 6.5 start menu: You will notice how scrolling through the menu is now REALLY slow and laggy! Go back into Speedbooster, enter the processes screen and now give gwes.exe the highest possible priority. Tap ok and again open the start menu: Now everything is really smooth!
So it can make a big difference! The big question is though: Which processes should have a high, which ones a low priority? Although that is simple to answer if you want to increase performance in CorePlayer or some other specific app, it's not easy to answer if you want to increase your overall performance...
EDIT: I'm going to benchmark Coreplayer with Speedbooster active and inactive to find out, how big the difference is... I'll post the results here later!
Here are the results:
I used this file (Matrix trailer): http://shintak.info/ppc/download/betaplayer/sample/RL_XQ_640x480_1500_128.avi
Results with Speedbooster inactive: 89,84 %
Results with Speedbooster active: 92,23 %
So there was a slight increase... but it's not much!
of course it does its job. its not an overclock application, but since windows mobile does not include a priority adjust application, this is so useful. for example, adjust manila.exe to high priority and open some background job. manila freezes without this app, but its so smooth with it (of course, while the background job done slower). but this is useful for web browsing and navigation applications, since they really suck sometimes (they get slow much even if u get a simple sms).
ps: i dont know how it affects battery but, it made my blackstone just like iphone with a proper config.
barisahmet said:
of course it does its job. its not an overclock application, but since windows mobile does not include a priority adjust application, this is so useful. for example, adjust manila.exe to high priority and open some background job. manila freezes without this app, but its so smooth with it (of course, while the background job done slower). but this is useful for web browsing and navigation applications, since they really suck sometimes (they get slow much even if u get a simple sms).
ps: i dont know how it affects battery but, it made my blackstone just like iphone with a proper config.
Click to expand...
Click to collapse
What is your config? I've used this and never really got it to work well.
SD card is installed.
But after I checked it myself suddely the location was moved?
Same speed before (pic3) and after I changed the settings(2)
Is this app really working?
Sean3 said:
What is your config? I've used this and never really got it to work well.
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=606416
A free version, though it does not do benchmark.
The dsai one is the free one.
MOD EDIT: CRACKED VERSION REMOVED
@bozbeast: By free do you mean cracked?
A mod please delete the speedbooster_ppc_2.0.020.rus.by.Dasai.cab file.
The worst part is that you are not realizing this is stealing.
Everyone, please remember that warez of any kind is strictly prohibited here.