Develop Bugs

Backup Rom?

Hi i just had my Artemis back from tmobile, i had bricked it by updating rom..
so now is my question can you backup your ROm?
So if i brick it i can replace it ?
Mt

44 views still no solution...

let me give you a good advise!! many people used those coocked roms and ended with a bricked or non functional device included me!
i did a back up of my rom and restore it after i had so much troubles with wm6!! now i send it to t-mobile for reparation and hope they will help me because i unlocked my artemis.

@lommer you still have problems after restoring the original ROM?

drkbg said:
@lommer you still have problems after restoring the original ROM?
Click to expand...
Click to collapse
yes, thats why i send it to t-mobile for repair , it is 1 week ago and i'm still waiting. i will let you know when i get it back to see if the problem in the software or hardware is. my problem was that my device turns off everytime.

lommer said:
yes, thats why i send it to t-mobile for repair , it is 1 week ago and i'm still waiting. i will let you know when i get it back to see if the problem in the software or hardware is. my problem was that my device turns off everytime.
Click to expand...
Click to collapse
i dont think that has anuthing to do with the ROM..

I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.

Flower said:
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
Click to expand...
Click to collapse
Sameproblem, someone has a solution?

There is a possibility to load the bootloader!
Press and hold camera & power buttons together and make soft reset with your pen and hold camera & power buttons together until it says "bootloader mode"
Here you can load your rom on to it!
Good luck!
Ps. does anyone have a original dutch tmobile rom?!

bravo2001 said:
There is a possibility to load the bootloader!
Press and hold camera & power buttons together and make soft reset with your pen and hold camera & power buttons together until it says "bootloader mode"
Here you can load your rom on to it!
Good luck!
Ps. does anyone have a original dutch tmobile rom?!
Click to expand...
Click to collapse
Already tried that 60 times... i think i need a original dutch tmobile rom...

Help needed tmobile mail(dash)

hi guys,
i got tmobile mail(with out wifi) my phone is hanged on startup it is just showing the tmobile logo on screen, can any1 guide me how to get rid of this problem i tried to reset it but its not working
thankx in advance
usman

Ok well hold down the camera (sym) button for about 10 seconds. Then plug in the usb while still holding down the camera button and install the official rom the phone came with, ie if its t-mobile then install the t-mobile rom. This should work.

Did you try waiting a bit? My friends Dash would stay like 5 minutes on the T-Mobile screen before booting into Windows.

jdoggraz said:
Ok well hold down the camera (sym) button for about 10 seconds. Then plug in the usb while still holding down the camera button and install the official rom the phone came with, ie if its t-mobile then install the t-mobile rom. This should work.
Click to expand...
Click to collapse
Thankx very much for ur reply
but i didn't get the mda mail rom orver there
can u give me the direct link for that
Usman javed

shusman said:
Thankx very much for ur reply
but i didn't get the mda mail rom orver there
can u give me the direct link for that
Usman javed
Click to expand...
Click to collapse
Yes the official roms are posted below in my signature. Just look below and download the t-mobile rom.

My s621 doesnt work after uninstalling accuwather...

Ok, so I turn it on and it freezes on the wm screen, I cant sync it to my pc anymore...my version is wm 6.1. Any suggestions?
Please I need it to work..

cafterg said:
Ok, so I turn it on and it freezes on the wm screen, I cant sync it to my pc anymore...my version is wm 6.1. Any suggestions?
Please I need it to work..
Click to expand...
Click to collapse
Take your battery out and leave the phone for a while and try and boot again, if no sucess you will want to flash to your Official ROM The way you will do this is by turning off your phone hold in the camera key and plug in the usb, you will see a tri colour screen called the bootloader, now on the computer you will want to run the Official ROM just as you did to flash to WM6.1, some of the Official ROMS are just .nbh files there is a link @ the bottom of the Official ROMs for the other files needed, then when you have WM6 on there you can flash to WM6.1 again.
Hope this helps.

Nevermind
Fixed it hard reset solved the problem.

cafterg said:
Fixed it hard reset solved the problem.
Click to expand...
Click to collapse
Glad you got it sorted just persumed you had tryed that sorry.

[Q] Flashed CMDA Hard SPL to a GSM Diamond

MOD EDIT: Can you help, I flashed my GSM diamond with the CDMA hard SPL from PPCGeeks: http://forum.ppcgeeks.com/showthread.php?t=36062
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx

Please post in the thread where you got it from!
You'll get an answer, and there will be fewer threads lying around here!

i don't understand what do u mean by this ?

now i use solution from
http://forum.ppcgeeks.com/showthread.php?t=36062
after write rom my htc is totaly dead can't power on
any solution to recover it

hbstun said:
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Click to expand...
Click to collapse
He means you should ask in the thread where you found this information above.
Code:
First and foremost...

ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?

hbstun said:
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
Click to expand...
Click to collapse
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.

When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.

aE3-ink said:
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
Click to expand...
Click to collapse
nothing hen i put usb cable nothing in the screen

Kevbodian said:
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
Click to expand...
Click to collapse
what do u mean by jtag and how i can do it ?

<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave

Serves you right for using a leaked unlocker program - Should have gone here . thanks to Olipro as the leaked version was buggy.
I do hope you get this fixed though. (I would help if I could really).

DaveShaw said:
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Click to expand...
Click to collapse
can't enter bootloader ?

hbstun said:
can't enter bootloader ?
Click to expand...
Click to collapse
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave

DaveShaw said:
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
Click to expand...
Click to collapse
ok thx anyway for your help

R3PUBL1K said:
Serves you right for using a leaked unlocker program - no sympathy or help from me.
Should have gone here thanks to Olipro as the leaked version was buggy
Click to expand...
Click to collapse
I think he tried the unlock before he flashed the cdma hardspl.

Kevbodian said:
I think he tried the unlock before he flashed the cdma hardspl.
Click to expand...
Click to collapse
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead

You must eter in "USB Trigger Mode"
hbstun said:
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
Click to expand...
Click to collapse
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...

kokocf said:
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
Click to expand...
Click to collapse
can't enter bootloader like u sad !

hbstun said:
can't enter bootloader like u sad !
Click to expand...
Click to collapse
Hello there! Where have you blocked, exactly ...?

What to do now ?

Hi,
I tried to load a HardSPL on my Diamond but it went wrong somehow.
My Diamond was stuck at 75% and everything went blank.
Now I can't power it up and even if I put in the power supply doesn't lid up the light of charging.
Is it dead? Can I throw it away? Or is there something I can do ?
THX

may sound stupid but have you tried to remove the battery

Did you tried a hard reset ??
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html

1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick

karlanal said:
may sound stupid but have you tried to remove the battery
Click to expand...
Click to collapse
Yes nothing

nickislauw said:
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
Click to expand...
Click to collapse
Nope, nothing

solidpowder said:
Did you tried a hard reset ??
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
Click to expand...
Click to collapse
Yes I know this one, my device doesn't go on, nothing.
Doesn't respond on anything.

lmdiablo said:
Yes I know this one, my device doesn't go on, nothing.
Doesn't respond on anything.
Click to expand...
Click to collapse
can you test your battery ?
or your power cable ?
during the update of the hard spl, did you have enough battery ?

solidpowder said:
can you test your battery ?
or your power cable ?
during the update of the hard spl, did you have enough battery ?
Click to expand...
Click to collapse
Before the update everything was working fine, I neder had any problems with it.
Battery is/was Full charged
I now the drills, I also did it with my XDA 7500 HTC and that wen ok.
I just only wanted to put on win 6.5

lmdiablo said:
Before the update everything was working fine, I neder had any problems with it.
Battery is/was Full charged
I now the drills, I also did it with my XDA 7500 HTC and that wen ok.
I just only wanted to put on win 6.5
Click to expand...
Click to collapse
maybe try to remove the batery for a long time (couple of hours) and then try again to go to the bootloader

solidpowder said:
maybe try to remove the batery for a long time (couple of hours) and then try again to go to the bootloader
Click to expand...
Click to collapse
Nope didn't work, Battery was out for 6 hours...

So has anyone any a good tip or should I trough it in the garbage

can you try with an other battery cell ?

solidpowder said:
can you try with an other battery cell ?
Click to expand...
Click to collapse
Already did, my friend has the same device.
Still doesn't do anything.
It's really dead.

nickislauw said:
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
Click to expand...
Click to collapse
lmdiablo said:
Nope, nothing
Click to expand...
Click to collapse
if you have not completed the hard spl you are not able to flash any new rom...it runs if you press reset + vol down + back at least?

ciao99 said:
if you have not completed the hard spl you are not able to flash any new rom...it runs if you press reset + vol down + back at least?
Click to expand...
Click to collapse
No, it doesn't do anything.
No power up
Doesn't charge.
Nothing.

How old is your device? Diamond was launched in may 2008 so a big change it isn't older then 2 years. In europe HTC devices come standard with a 24 months warranty.
You could send it in for repair in that case, and since the device isn't booting at all, the changes HTC detects that it died during a 'warranty destroying' procedure are not that big. And if they do they will contact you prior to actual repairing/making costs.
Before throwing it away you could give this a try, nothing to loose huh?