Develop Bugs

UK MDA Pro + O2 Rom + MDA/O2 Ext Rom Clean Install (Guide)

Hi
I've spent the past few days geeking with my MDA, using the wealth of info from this forum.
I tried the JasJar rom (too much [email protected]), and ended up with:
- XDA CE Rom (1.13.48 )
- Radio From O2 Rom (1.04.02)
- Minimal Stuff from XDA/MDA ext roms
Goal was to install with the least [email protected] possible.
Step 1 - Flashing The XDA Exec Roms
First flash with O2 XDA Rom, using the info available here: http://forum.xda-developers.com/viewtopic.php?t=32725
To sumarise the above...
- Get XDA rom from:
ftp://xda:[email protected]/Uploads/Universal/Shipped ROM/Xda_Exec_LaunchROM_v113139.exe
- Unpack the above using winrar.
- Plonk MaUpgradeUt_noID.exe in the folder where you unpacked the O2 rom (you can get this file from the ftp site, in the file: ftp://xda:[email protected]/Uploads/Universal/JASJAR_WWE_11353_137_10402.rar
You only need the one file!
- Disable activesync
- Put MDA in bootloader mode
- Connect to PC via USB, wait for hardware detection
- Run the file MaUpgradeUt_noID.exe from the O2 Rom directory on the PC
- Wait ;-)
- Once it restarts, do the usual CE setup, but do not let the extended rom install (simply soft reset at the prompt). If you have gotten past this stage, just hard reset again, and do the soft reset at the correct point!
Step 2 - Installing Progs From Extended Rom
- You'll now have an MDA with the XDA CE and Radio roms installed. It will need the appropriate patches installing from the XDA and MDA extended roms.
- To start, DL both extended roms:
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
- For info on what each of these roms contain, look at the following threads:
MDA: http://forum.xda-developers.com/viewtopic.php?t=32839
XDA: http://forum.xda-developers.com/viewtopic.php?t=32527
- You dont need all that ****e, I installed the following:
XDA:
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB (bluetooth patch)
MDA:
CAB-Customization-TMUK-Universal-01-03-04Aug05.CAB (Adds MMS Server Settings)
CAB-Shorcut-TMOENU-08Aug05.CAB (Adds MMS to outlook + installs some shortcuts which you can remove later)
Enable_VT_RTPlugin_0727_2_signed.CAB (Enables Video Calling)
Signed_UNI_TMO_Connection_112100.CAB (Adds 'T-Mobile Internet' and 'T-Mobile Internet CS' for GPRS/3G connection)
Stage 3 - Cleanup
- The CAB CAB-Shorcut-TMOENU-08Aug05.CAB also installs a links. If you dont install the cab TMO_UK_UI_0727_signed.CAB then these will be dead llinks. The 'clearvue pdf' reader is a part of this cab (but if you install it, you'll get all the other sh1te it contains also. I was not interested in the PDF reader, so I just trashed the dead links.
- There are two dead links in Programs (they'll be obvous by their icons. I seem to remember them being 'clearvue PDF' and 'EmailWiz' In Explorer, browse to /windows/start menu/programs and trash them.
- Several shortcuts are installed in /windows/startup. Trash the elatepushservice (I dont know what this does, but I dont appear to be missing anything!), sddeamon (this causes the prompt 'view pics on card' when you insert a card containing jpgs from digicam etc). DONT trash 'poutlook' as otherwise the MMS folders wont appear in pocket outlook.
- Install Pocket Mechanic, and use it to ditch bad registy keys and cleanup the notification que.
- Could also install the ext rom unlocker & Total Commander so that you can shove only the cabs you want into the ext rom (or use the space for somet more useful) See Here: http://forum.xda-developers.com/viewtopic.php?t=33638 (Cheers Buzz!)
Registry Hacks
Goto: http://wiki.xda-developers.com/index.php?pagename=Universal_Registry and pick some registry hacks to install. I did 'keys on today screen', 'disable start menu animation', 'change pocket ie', 'change fonts', 'change glyph cache' and 'change web hardware button' - to 'about:blank'
Goto:
http://forum.xda-developers.com/viewtopic.php?t=33515 and make the suggested changes to the cache settings. I found that this did speed stuff up, but since its only cache settings, it will only speed up stuff the second time you try and do it!
Soft Reset
Install Your Progs
I installed
In Internal Mem
Resco Explorer (+regedit +ftp) to replace the MS sh1te
Resco Pic Viewer (to replace the MS App)
Pocket Informant (case the built in stuff is useless)
Resco Audio Recorder
Resco Pocket Radio
TCMP Media player
Net Remote (to control my HTPC)
SPB GPRS Monitor (from MDA CDROM)
Zimmermann Pocket Hosts (essential for VPN use)
Small menu (so I can ruddy well close open apps!)
IPConfig
Pocket Putty (SSH)
On CF Card
Total Commander (to get to the ext rom)
WiFiFoFum (for free email on the move ;-)
Pocket Mechanic
Concluding
Machine is now both fast, stable and not full of bloat-ware. Have 22MB free storage, and 27MB free program memory.
Main Issue left is the time that machine takes to respond to an incomming call when its switched off. On the original MDA rom, I had 4 rings before machine actually rang. Now I have about 2.5.
Time for sleep! I'll read through this tomorrow and correct any errors...
Nigel

One essential point.
According to the publisher, Pocket Mechanic should not be installed to the SD-card, especially if you intend using any of Pocket Mechanic's functions against the SD-card - could lead to corruption.
Personally, I've installed (and run) many of the applications you've listed as "Internal mem" direct to the SD-card without experiencing any problems.

Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks

Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel

veletron said:
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
Click to expand...
Click to collapse
I can understand Pocket Mechanic objecting when you defrag/benchmark the medium it itself is running from.
Haven't had any problems with Resco, but haven't tried the update facility.

velvetron
I am an o2 uk user... I am asuming you are too..
I see you installed the tmob cabs for interent and 3g connection... does this work on o2 or am i being stupid..
Which should I install please advise
magpie

Re: velvetron
magpie2000k said:
I am an o2 uk user... I am asuming you are too..
Click to expand...
Click to collapse
Nope I am a t-mob user. If you are with O2 then you wont be wanting to install stuff from the T-mob ext rom!!
Nigel

want to change dopod 900 (chinese rom) to o2 exec rom
is it feasible?can thr be any incompatibility?

where can I find JASJAR_WWE_11353_137_10402.rar ?
Hi,
I am gathering the files to perform the upgrade as detailed in this thread, however I can't seem to find JASJAR_WWE_11353_137_10402.rar.
Is there a better one to use now ? or should I keep searching for JASJAR_WWE_11353_137_10402.rar ?
In fact most of the links have moved ...
Thanks

Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
Can you dump your extended rom and post on the ftp site?
I've tried installing the french version, but the UI won't install. Most odd...

I can't find the ROMS
I keep getting :
File not found
You tried to access the address ftp://[email protected]/Universal/Extended ROMs/, which is currently unavailable. Please make sure that the Web address (URL) is correctly spelled and punctuated, then try reloading the page.
Can any one point me in the right direction ?
I have a T Mobile (UK) MDA PRO, the wifi connection lasts for about 3 seconds, then it keeps trying, but failing.
These are the ROMs I'm after :
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
Thanks

Hi
Looks like someone has trashed the FTP site (again) all those roms have dissapeared. Hopefully they'll get restored... Did a backup exist??!
I'll search my laptop see if I have any of the missing roms
Nigel

Yup the FTP's missing practically every file...
I need the NO ID upgrade launcher file to flash my MDA Pro to XDA Exec please.
If anyone can upload it or send it me accross msn it'd be much appreciated

take a look at the last post :
http://forum.xda-developers.com/viewtopic.php?t=35123&highlight=

Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
This is all I've worked out so far:
Signed_ORUK_Customize.sa.CAB
sets orange wap homepage
Signed_DiscoButton8.sa.CAB
GPRS disconnect button
Enable_VT_RTPlugin_0727_2_signed.CAB
Ringtone plugin, phone skin
UI_Orange_UK_0727.cab
The orange plugin on today screen???
Mat

Also, if anyone would like it - you are free to download contents of Orange M5000 extended ROM from my website:
www.compsoc.man.ac.uk/~matsmith/bobs/orange.zip

B&B 4.1, audiomanager not able to find mp3s in storage card

B&B 4.1, audiomanager not able to find mp3s in storage card
the ROM works great! many thanks to tom.
just discovered a bug that the audio manager isn't able to find mp3s in the actual storage card.
from the file explorer, the actual microSD card has been renamed to "Storage Card2", and there is a system created folder: "Storage Card", which contains some IE temp files and email files.
hope someone can fix that. thanks.
Also, can anyone give me some advice on some kind of software that will allow the ORBIT to show "running app" on the "today screen", which is one of the O2 plugins. THANKS again.

betaexpert said:
B&B 4.1, audiomanager not able to find mp3s in storage card
the ROM works great! many thanks to tom.
just discovered a bug that the audio manager isn't able to find mp3s in the actual storage card.
from the file explorer, the actual microSD card has been renamed to "Storage Card2", and there is a system created folder: "Storage Card", which contains some IE temp files and email files.
hope someone can fix that. thanks.
Also, can anyone give me some advice on some kind of software that will allow the ORBIT to show "running app" on the "today screen", which is one of the O2 plugins. THANKS again.
Click to expand...
Click to collapse
Sorry friend..
Problem solved..!
Why don't read in my thead.If all people make new thead.We need How many thead ?

I have searched the BB4.1 threat with the keyword of "storage card2" and "audiomanager", but don't see any solution of the problem.
Can you point me the right direction please?

I think this is the thread Tom was talking about!
http://forum.xda-developers.com/showthread.php?t=326334

thank you for the link.

This is deleted

That's why developers thininking about to leave....
just gave it two tries to search, and then asap a new thread
for something already answered....come on guys, struggle yourself...
and don't let others do the research for you....
Tom (and all the other guys) (they are developers,no Supporters ) has other things to do than answering such questions....
Just my 2 cents...
Cheers,
and don't forget to enjoy some Guinness....

Finally Sdhc Works With This Cab !!!

Hi there all,
i have been searching for a solution for the sdhc support. Lots of emails to providers, lots of threads in forums but no solution.
Tried a lot of updates cabs and fixes but did not work!
Finally a cab in XDA-Dev worked! Now, I can see my 4GB SDHC Sandisk Storage card in my File Explorer
Here is the link for the CAB-File
I hope it works for you too..
My Device: Xda Orbit (P3300) with Pdaviet 4.1 Rom, Radio v02.97.90
Please post your results here.....
Regards from Germany

thanks from china

well if it works for you will work for us too

NikMel said:
well if it works for you will work for us too
Click to expand...
Click to collapse
Resuuullllttss??

Glad to Hear....
This is great news! now to find the biggest card available and try it myself!

Well,
i have installed the old v4.0 and tried the cab, with PDAViet ROM v4.0. Unfortunataly didnt work.
I think it works only with verison 4.1. Iam installing now 4.1...

No no noooo..
It does not work!!!
After installation of cab, it created a Storage Card folder in root. But this folder does not contain my files... (This appears only on v4.1) I see only "mail, cacheie and temp" folders in this Storage Card folder, and these are not the files on my Card...
Sorry...
So, keep searching for a solution...
Regards...

P800w_SEA_ENG_WM6_Upgrade_20070713 rom already has this driver and support
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
"BaseClockFrequency"=dword:01312d00
"CDPriority"=dword:00000065
"CardDetectSysIntr"=dword:0000001d
"SDIOPriority"=dword:00000064
"ControllerIRQ"=dword:0000001c
"Prefix"="SHC"
"Dll"="OMAP850_SDHC.dll"
"Order"=dword:00000021
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
"IClass"=hex(7):\
7b,41,34,45,37,45,44,44,41,2d,45,35,37,35,2d,34,32,35,32,2d,39,44,36,42,2d,\
34,31,39,35,44,34,38,42,42,38,36,35,7d,00,7b,41,33,32,39,34,32,42,37,2d,39,\
32,30,43,2d,34,38,36,62,2d,42,30,45,36,2d,39,32,41,37,30,32,41,39,39,42,33,\
35,7d,00,00
"IOCTL"=dword:00000004
"FSD"="FATFS.DLL"
"DisablePowerManagement"=dword:00000001
"Profile"="SDMemory"
"BlockTransferSize"=dword:00000040
"Prefix"="DSK"
"Dll"="SDMemory.dll"
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity]
"IClass"=hex(7):\
7b,41,34,45,37,45,44,44,41,2d,45,35,37,35,2d,34,32,35,32,2d,39,44,36,42,2d,\
34,31,39,35,44,34,38,42,42,38,36,35,7d,00,7b,38,44,44,36,37,39,43,45,2d,38,\
41,42,34,2d,34,33,63,38,2d,41,31,34,41,2d,45,41,34,39,36,33,46,41,41,37,31,\
35,7d,00,00
"Profile"="SDMemory"
"BlockTransferSize"=dword:00000040
"Prefix"="DSK"
"Dll"="SDMemory.dll"

NikMel said:
P800w_SEA_ENG_WM6_Upgrade_20070713 rom already has this driver and support
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
"BaseClockFrequency"=dword:01312d00
"CDPriority"=dword:00000065
"CardDetectSysIntr"=dword:0000001d
"SDIOPriority"=dword:00000064
"ControllerIRQ"=dword:0000001c
"Prefix"="SHC"
"Dll"="OMAP850_SDHC.dll"
"Order"=dword:00000021
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
"IClass"=hex(7):\
7b,41,34,45,37,45,44,44,41,2d,45,35,37,35,2d,34,32,35,32,2d,39,44,36,42,2d,\
34,31,39,35,44,34,38,42,42,38,36,35,7d,00,7b,41,33,32,39,34,32,42,37,2d,39,\
32,30,43,2d,34,38,36,62,2d,42,30,45,36,2d,39,32,41,37,30,32,41,39,39,42,33,\
35,7d,00,00
"IOCTL"=dword:00000004
"FSD"="FATFS.DLL"
"DisablePowerManagement"=dword:00000001
"Profile"="SDMemory"
"BlockTransferSize"=dword:00000040
"Prefix"="DSK"
"Dll"="SDMemory.dll"
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity]
"IClass"=hex(7):\
7b,41,34,45,37,45,44,44,41,2d,45,35,37,35,2d,34,32,35,32,2d,39,44,36,42,2d,\
34,31,39,35,44,34,38,42,42,38,36,35,7d,00,7b,38,44,44,36,37,39,43,45,2d,38,\
41,42,34,2d,34,33,63,38,2d,41,31,34,41,2d,45,41,34,39,36,33,46,41,41,37,31,\
35,7d,00,00
"Profile"="SDMemory"
"BlockTransferSize"=dword:00000040
"Prefix"="DSK"
"Dll"="SDMemory.dll"
Click to expand...
Click to collapse
THIS MEANS????

I don't have a sdhc card so it is just in theory it should work within this rom P800w_SEA_ENG_WM6_Upgrade_20070713

and this is no fake ? All the guys are telling it's not working because of hardware limitations and now a cab solves all issues? i am a little bit sceptical.... ....but just ordered one 4gig card...
Edit 11/September:
Does not work on my device. I'm using Meschle's Touch 1.0.

Hello, can't get .cab file to work. I am using a scandisk 4 GB SDHC and using resco 6.10 or ms file explorer. if anyone has this working is there an order to install and register the .dll files and can we have a screenshot so we know that this is not just a mirage. Many thanks
O2 orbit B&B 4.1

kespir said:
No no noooo..
It does not work!!!
After installation of cab, it created a Storage Card folder in root. But this folder does not contain my files... (This appears only on v4.1) I see only "mail, cacheie and temp" folders in this Storage Card folder, and these are not the files on my Card...
Sorry...
So, keep searching for a solution...
Regards...
Click to expand...
Click to collapse
thats not a bug of the pacth, its a bug of B&B 4.1.
When u install the ROM without a SD Card in teh device, it creates itself a "virtual" storage card.
Rename it to "Storage Card 3"
Insert real SD Card, the "Storage Card" should appear in your File Explorer.
Delete Storage Card 3
______________________________
tom_codon voted, that it WORKS? w00t?

SDHC Cards
Installed the driver on a WM6 o2 upgraded Orbit and it doesn't seem to do anything...DOESN't WORK!!

Who voted "YES, it's working" ???
The storage card bug in B&B 4.1 can be solved by deactivating the messaging tab on the today screen, renaming the storage card, resetting and erasing the renamed virtual storage card.
Who are the guys that voted that SDHC works on their devices ???
And for those that think it's not possible because of the hardware: that doesn't seem to be exactly the case. Search other forums on the xda-dev site and you will find out.

These are the guys that voted that sdhc patch works: lepsyfou, lestuan, tom_codon.
...either Tom is pulling our leg or it is good news indeed...

kakainis said:
These are the guys that voted that sdhc patch works: lepsyfou, lestuan, tom_codon.
...either Tom is pulling our leg or it is good news indeed...
Click to expand...
Click to collapse
Sorry.I'm vote wrong.My friend said me it work.Then he said again it not work

sorry i had not read the vote good. It doesn't work.
Greetz
hoedie

This may be irrellavent but it fixed a 4gb gard on a mio A201 running WM6 Personaly i ain't seen it but he says it showing "Storage card size comes up as 3874.91 mb" all he dis was install the CAB file (with his 2gb card in) and then insert his 4gb storage card and reset. no renaming or messing about

No work on Orbit WM6 with 4GB SDHC

[ROM] 18-01-09 GSM1 {Working} (Chefs help neaded)

Here is my first build of a diamond rom,
I Have taken a cooked rom and Modifyed/tweaked a little and am now looking for some help to finalize this
The rom is fully working but i would like some help with 1 or 2 final tweaks
1st problem:- I cannot get the SDautorun to work, i have added the line "EXEC:\wondows\sdautorun" to config.txt and sdautorun is in the windows folder but nothing happening sdconfig.txt is in internal storage and formatted correctly (copy the folder with cabs and sdconfig.txt to artemes sd card and no probs)???
2nd problem :- I cannot get the custom folder icons working? please post any dll and shortcuts for me (The folder icons i would like to change are for folders named "Accessories, Applications, Bluetooth, Communicatons, Games, GPS, Media, And system tools)
3rd Problem :- where do i change the version ID for device info to my name?
4th Problem :- How can i change the default regional settings to location UK from US
5th Problem :- I can't seem to move the bluetooth explorer shortcut to the bluetooth folder
6th Problem :- How did Duttythroy get his internal storage icon to opem file explorer at Internal storage and an icon of the internal storage?
7th Problem :- where is the default WM6-Green theme stored as i would like to change some colours before Customization mainly the green in the next and skip buttons straight after hard reset
8th Problem :- I have also tried to get the .NET/SLQ Server fix cooked into my rom but after cooking Netcf2,slqserver,then netcf3.5 manilla wont load but if i remove cf2 manila loads the beejive IM wont load cos the fix hasnot been done any help Here?
all you chefs out there i would be gretfull for any help on the above issues for me as having this rom on my diamond would be great (For me anyway)
Would love as much help as possible,
I would like to thank all the developers in the forum for creating the tools neaded
also I wish to thank the chefs for there Roms i use as a base and packages used
and a special thanks to you for stopping by reading and making your helpful comments for me to learn more.
rom cooming soon in kitchen format for the chefs to look at to fix my problems
download here (uploading)

1: I think you might want to work on this wise saying you have in your sig yourself "Search, Read, Learn and you will be wise............ "
2: Am I mistaken or are you cooking for the Artemis? This is the Diamond forum.

adwinp said:
1: I think you might want to work on this wise saying you have in your sig yourself "Search, Read, Learn and you will be wise............ "
2: Am I mistaken or are you cooking for the Artemis? This is the Diamond forum.
Click to expand...
Click to collapse
1: searching has got me nowhere thats why i am stook with these points, i am proberly searching in the wrong place or i am searching too hard and missing the point.
2: I am cooking for diamond. only mentioned artemis as i tested the sdconfig.txt file and folder on it

This generally goes against my spoon-feeding, but:
1: Check if you have a typo. Provisioning also means that argument should start from the 6th character, in this case:
EXEC:\Windows\SDautorun.exe bla bla bla
2: Icons are generally links
For example: in folder Z, you've got someicon.lnk
Which is linked to somedll,-45 (icon in position 45)
3: Search & you'll find. The best way to learn cooking, is to actually cook. You won't learn anything if everything is given to you on a silver plate.
4: There are some interesting links on msdn about provisionining. There even is an example how to change regional settings.
5: ?!? Care to be more explicit? Check the BTFTP package.
6: Ask Dutty directly. ^.^
7: hint: SYS folder (or use the damn search). And THIS proves you didn't even CARE to take a look at WHAT you're exactly cooking. I must admit, that the file isn't always present, you must sometimes take a look at the rgu.
8: You'll have to cross-reference. I'm guessing you have left both NetCF 3.5 and 2.0 enabled in the registry...

adwinp said:
This generally goes against my spoon-feeding, but:
1: Check if you have a typo. Provisioning also means that argument should start from the 6th character, in this case:
EXEC:\Windows\SDautorun.exe bla bla bla
2: Icons are generally links
For example: in folder Z, you've got someicon.lnk
Which is linked to somedll,-45 (icon in position 45)
3: Search & you'll find. The best way to learn cooking, is to actually cook. You won't learn anything if everything is given to you on a silver plate.
4: There are some interesting links on msdn about provisionining. There even is an example how to change regional settings.
5: ?!? Care to be more explicit? Check the BTFTP package.
6: Ask Dutty directly. ^.^
7: hint: SYS folder (or use the damn search). And THIS proves you didn't even CARE to take a look at WHAT you're exactly cooking. I must admit, that the file isn't always present, you must sometimes take a look at the rgu.
8: You'll have to cross-reference. I'm guessing you have left both NetCF 3.5 and 2.0 enabled in the registry...
Click to expand...
Click to collapse
sorted No5 My mistake, totaly overlooked this one while moving all the files into folders, going to work on the net cf issue first as this is holding me up next everything else is cosmetic and i can cope with that.

iGo8 on Dutty's R4 Muchos.

I had before the Dutty's ROM the stock ROM and iGo8 worked fine with the stock ROM. Yesterday I flashed my HTC Touch HD to the Dutty's WM6.5 R4 Muchos and iGo8 is giving me every time a error:
"Program application database cannot be found. Please insert original application SD card".
I also tryed with the AUTORUN to install it on the internal memmory but shows me the same error message.
Might there be a solution to this?
Greetz,
Roy
EDIT:
Stupid stupid stupid.
Forgot to change the SYS.txt
[folders]
app="Storage Card/iGo8"
The path was all wrong.
Sorry for this all nonsense post.

anyway of setting up IG08 to run from device but store files in storage card??

personally, i installed TomTom and iGo to my microSD so i never have to reinstall after ROM flashing. i simply copy a short-cut to the start menu and i'm up and running with no issues. both applications run fine from the microSD card.

and why would you want to do that?

Problem to keyboard of igo 8
With this rom do not work the keyboard of igo8 for put the city because there is the caracter a on the string, so j do not coud put the name of the city.
Samebody know the cause.
Thanks

The answear of this problem is in Dutty's 3.9 Turbo thread! Search in the thread for "igo8" and you will find the things you must Add in SYS.TXT to clear the symbol!