Develop Bugs

Bluetooth Headphones Problem

I have an O2 XDA Mini S and have just purchased a pair of Motorola HT820 Bluetooth headphones. I have paired the two; however, I only get the Hands Free service (which works) but NO Wireless Audio. I have not installed any other software / drives and I am using WMP 10 Mobile to play the music.
Any help with this problem would be very much appreciated.
Thanks, Harold Clements

...Ok, I have been on this for about 4 hours now and I am starting to get a bit annoyed.
I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think I should also have ‘Set as Wireless Stereo’ or something, but I don’t.
Please, has anyone any ideas?
Thanks, Harold Clements

Wirless Audio Hacks
I really could do with someone’s help!
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am unsure:
a) if this is a solution to for problem / PDA.
b) what a hack is and why is it needed?
Please can someone help!

I don't know wich kind of PDA you have, as you can see everyone here calls their PDAs by their HTC's code name (mine is a universal), go to look the pictures of all the PDAs, find yours and search directly inside there, it will be much easier for you to find an answer.
One simple comment, your PDA has to have the Bluetooth high quality audio (is called be some PDAs in this way), see if your PDA does contain such feature, you have to activate it if you want to hear stereo audio, generally when you pair your phones for the first time, your PDA will show you the option already ticked, if you haven't see it, chances are that something is missing in your bluetooth profiles, go to your PDA's specific part of this forum and read, with patience and some luck, I'm sure you'll find whatever you need to get your PDA's stereo audio to work.
Most of the cases, are just the lack of the profiles or even installing another BT stack.
good luck

Thanks...
Thank you very much for your advice / reply, it was very much appreciated. It seems that my PDA is a Wizard. I will indeed search that part of this forum.
Thanks again,
Harold Clements

I don't think your phone supports A2DP profile. Correct me if I'm wrong.

Neither do i know if his phone supports it, I use to have an Ipaq 6340, it suppose that it didn't supported A2DP but with an BT stack extracted from another PDA (don't remember wich one) it worked, it didn't worked very well, it dropped audio more or less each 30 seconds for 2 seconds, someone said at that time that was processor lack of power -I didn't agree with this-, but I did no further investigation.
As far as I've understood, the main bottleneck for stereo profiles (or any deamanding profile in BT) is the radio, of course, if We don't have access to the manufacturers good information, good tools, much time and even more will is very hard to find a solution to anything, most of us do not spend lots of time with this things -it's not easy for anyone with a "normal" life-, and I'm not complaining!
It's just fine for me, the whole thing it's quite enjoyable like this, some more time spent in this way and it would become a second work.
So, may us have fun and keep an excellent forum up.

haroldjclements said:
I have an O2 XDA Mini S and have just purchased a pair of Motorola HT820 Bluetooth headphones. I have paired the two; however, I only get the Hands Free service (which works) but NO Wireless Audio. I have not installed any other software / drives and I am using WMP 10 Mobile to play the music.
Any help with this problem would be very much appreciated.
Thanks, Harold Clements
Click to expand...
Click to collapse
on the front page not 2 rows (at the moment) below this thread in really big bold letters
MOTO HT820 SKIPPING SOLVED! NEW FIRMWARE INSIDE!
which covers the issues and varioius fixes (if any) for most phones.

To be truthful, I know very little about what I am trying to do. All I know is that I can’t get the music side of the Motorola headset working.
As I said in my previous post: I have an O2 XDA Mini S (Wizard) and have just purchased a pair of Motorola HT820 Bluetooth headphones. The two paired but I only get the Hands Free service but NO Wireless Audio. I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think It should also have ‘Set as Wireless Stereo’ but It don’t.
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am a) unsure if this is a solution to my problem, and b) what a hack is and why is it needed?
I just really want to know how to fix my problem.
Thanks for your help,
Harold Clements

a hack is getting a device which dont support a feature to do it anyway
if htc dident make your device to support a2dp == bluetooth stereo
you maybe be able to get it to do it anyway using a hack
if any hacks works for your device
as it differs
bluetooth support is never support for all profiles bluetooth have
plus there are bluetooth version 1 - 1.1 - 1.2 and 2.0

haroldjclements said:
To be truthful, I know very little about what I am trying to do. All I know is that I can’t get the music side of the Motorola headset working.
As I said in my previous post: I have an O2 XDA Mini S (Wizard) and have just purchased a pair of Motorola HT820 Bluetooth headphones. The two paired but I only get the Hands Free service but NO Wireless Audio. I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think It should also have ‘Set as Wireless Stereo’ but It don’t.
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am a) unsure if this is a solution to my problem, and b) what a hack is and why is it needed?
I just really want to know how to fix my problem.
Thanks for your help,
Harold Clements
Click to expand...
Click to collapse
The zoia a2dp hack (zoa2dp.cap) is what you need, it will give you "Set as wireless stereo" but be prepared for pretty bad skipping, that has not yet been solved for all of wizards.
Also if you flash to a custom rom (Like Molski's 2.26 it'll have the patch automatically.)

New Jabra BT620s firmware available

Hi guys,
this morning I've found the firmware upgrade for Jabra BT620s. It solves all connection problems (no need to activate AD2P from Bluetooth Settings Applet) and improve quality.
Here the link.
http://www.jabra.com/JabraCMS/EM/EN/Misc/Software620s (server is very slow)
I hope this is a real news... I don't know when the update became available...
ByezZ

it's available now and i downloaded it on my BT620s
i feel the quality is better now

what is the best bluetooth headset for dopod 900?thanks

Wau
Wau this update is cool. I was happy with the old one but this rocks ) thnx for info .. I didnt know that it is possible to update firmware in my headset ...

Can you use the sync cable that came with your PPC or do you have to use one provided by Jabra?(If there is one?)

Alkhal said:
Can you use the sync cable that came with your PPC or do you have to use one provided by Jabra?(If there is one?)
Click to expand...
Click to collapse
I think that a normal USB cable like the Universal one is required... But not completely sure... If Windows installed the driver without problems, everything should be ok... Let us know!

Nice. By the way, this update doesn't work with Windows 2003 x64. I don't know if it x64 or 2003 issue
Had to patch it on winXP

HTTP 404
Could anybody upload this update somewhere else?

Here you go:
http://rapidshare.com/files/35907193/saturn1310.zip.html

Thanxxxx!!!

My apologies for posting so long after this thread died down, but I have a few people to thank and it is well earned credit regardless of how far after the fact it is given. To edeplano and marco.minetti for their posts about new firmware for the Jabra BT620s I am most grateful as it was the key to ending my troubles with this headset, and a special thanks to captainsensible2002 for the rapidshare link since the original link has gone down.
I can't tell you how deep a hole I've dug to find an answer to this headset's problem. When connecting my AT&T Tilt (HTC TyTn II), if I don't turn on the phone's BT radio first (as opposed to turning on the headphones first), I have to go through all those "activate AD2P from Bluetooth Settings Applet" steps. My original thought was to find a macro program to record all the steps and just link that to a hard key, which is when I stumbled on edeplano's post. After a bit more digging through Google to find out more about this new firmware, I got linked back to this thread. Thanks to you guys, I needn't worry about any of that "which BT is turned on first" nonsense anymore as the headphones connect regardless of which device is switched on first now. I haven't tested it for better quality yet as has been claimed, but I thank you all in advance if that is truly the case as well.

problem updating
Hello! I'm a new user of the Jabra Bt620s. I was trying to update the firmware but once i put the headphones y "software download mode" windows asked me for the driver but... it has no drivers! and the program SATURN don't want to give me the "NEXT" as an option.
Have anyone experienced this problem?
I've tryed to update the firmware in windows XP SP2, XP SP3 and Vista Ultimate.
PLEASE! HELP!! thanks

I too am having this problem. Is there not a driver? I have spent countless hours over the past couple weeks trying to find this stupid driver... it is like it doesn't exist!

No luck for me
Apologies for resurrecting this old, old thread. I'm stuck, and don't know where else to turn.
I bought a BT620S on ebay. It seems like a great device, but I would like to update the firmware to address some of the stuttering, etc.
I downloaded the firmware update software and ran it. I plugged in my headset and pushed the two buttons, until one of the lights changed to green. However, the firmware update software just sits there, with the Next button disabled.
Does anyone have an idea about how to update the firmware successfully?

im having the same issue has everybody else.. next button does not work

Lolz, this was an year old thread & I just thought we have something new. I bought BT620 after this date so my BT may already have this.

I also was annoyed by some of the small issues with the Jabra BT620s, and also found the jabra.com webpage useless for firmware update, and also found this thread.
Next never became avaiable in Win7 64 bit (not even in compabilitymode), but then I turned to my girlfriends old laptop with WinXP 32bit (all updates installed).
Here no problems were encountered, everything went according to installation instructions, and the update seems to have helped on the sound quality ecc.
Thank you so much for providing the link! I hope this can help someone else.

Got it!
6 computers in the house, but no Windows XP.
Visiting in-laws for the holidays, and they have only WinXP. I brought the firmware upgrade .exe and the headphones, and it worked. Awesome!
The sound sync isn't quite perfect: when I play Left 4 Dead, firing weapon the sound is a little late. But for anything else, it seems just fine.
Thanks folks.

I just upgraded my bt with this & now there is no A2dp support. Can anyone point me towards any other update? I need to rectify this as soon as possible.

Nightmare!
corepda said:
I just upgraded my bt with this & now there is no A2dp support. Can anyone point me towards any other update? I need to rectify this as soon as possible.
Click to expand...
Click to collapse
Hi corepda
Really hope this gets you going!
http://rapidshare.com/files/140587667/bt620s_usb-driver.zip
Cheers
andrew-in-woking

WM6 Hermes sound issue...

I'm fairly new to this and really appreciate all the excellent work done here. I've been researching for days on making my device send sound to the headset. Can someone point me in the right direction? Really would appreciate it.
I have been using Pandora's Kitchen to make new ROMs for my 8525. It's awesome BTW.
What I'm trying to do is get ALL sounds to my BT HS. Voice Commander, rings, alarms, etc. just won't do it. I was thinking there must be someway to program or direct each "category" of sounds to a specific device.
Thanks in advance.

BT
I'll reply before you get hounded about using google/wiki/search...
Search for the cab file "destination gotland bluetooth mono". Works perfectly and switches all audio to the BT headset or back to the tytn. Does not solve the Microsoft VoiceCommand issues, thats a different search and solution.

Thanks for the help... it worked.
Your assistance is much appreciated. For the record, I did research and search like crazy.
Thanks again.

Does this allow me to make the ringtones and sounds come out of my device if I have a STEREO bluetooh. I've been turning off my bluetooth in order to get rigntones to the device. I don't like having the bluetooth on my head at all times, and don't know if I go a call when the bluetooth is on because my device won't ring.

Bluetooth Profiles

>I HOPE YOU MIGHT BE ABLE TO HELP OR GUIDE ME. > >I HAVE BEEN STRUGGLING FOR A YEAR DOING AN INTENSIVE BUT MOSTLY UNSUCCESSFUL RESEARCH TO SOLVE ONE PROBLEM: LACK OF BLUETOOTH COMPATIBILITY BETWEEN MY iMATE POCKET PC PHONE (http://www.clubimate.com/t-DETAILS_PPC.aspx) AND THE BLUETOOTH CAR KIT IN THE iDRIVE OF MY BMW 335i (2007).> >I HAVE CONTACTED BMW AND IMATE SUPPORT (BY EMAIL AND BY PHONE FROM MEXICO CITY) MANY TIMES WITHOUT SUCCESS. (AND MANY OTHER SITES)> >THE CLOSEST FIX TO MY PROBLEM WAS TO UPGRADE (http://forum.xda-developers.com/) THE iMATE POCKET PC PHONE ("HIMALAYA")2003 OPERATING SYSTEM TO WB 5 AND WB 6. I WAS SURPRISED THEY WERE FINALLY COMPATIBLE. UNFORTUNATELY THE FIX IS VERY UNSTABLE AND PRODUCED TOO MANY SERIOUS PROBLEMS IN MY DEVICE.>A FRIEND LENDED ME A IMATE JASJAR AND IT WORKED FINE WITH MY BMW. OTHER CELLULAR PHONES HAVE ALSO WORKED FINE>>ALSO INSTALLED A DOWNLOAD (http://bluetooth.i-networx.de/index_e.html) THAT SUPPOSED TO FIX IT BUT DID NOT WORKED. I FOUND THIS DOWNLOAD FROM (http://wiki.xda-developers.com/index.php?pagename=HimalayaFAQ) WHERE IT IS EXPLAINED "HIMALAYA" IS MISSING THE NECESSARY PROFILES.> >I THINK THERE SHOULD BE A POSSIBILITY OF "EXTRACTING" THE NECESSARY BLUETOOTH PROFILES-STACKS-BUNDLES TO DOWNLOAD TO MY DEVICE.> >IS THERE ANYTHING YOU CAN DO TO HELP ME?

how to get Stowaway BT driver work with WM6

I'm using HTC Trinity WM6 and wish to use my old Stowaway universal Bluetooth keyboard working? i cannot find driver for WM6. anyone have it?
please help!! i love my BT keyboard and wish to get it work again.
thanks

Attached is the driver I use for my Kaiser WM6/6.1, dunno if it'll work on your Trinity or not.
If not here is the drivers page: http://corporate.igo.com/support/Drivers.asp. Just choose your manufacturer and model.

Note that WM6 comes with basic keyboard drivers -- you only need to install a driver if you want to use special functionality such as customized keys. I use the built-in drivers on my Kaiser with a BT keyboard (not the Stowaway, but supposedly compatible).

htc tytn II and sierra bt keyboard
everybody,
trying to connect / use my new sierra bt keyboard with my htc tytn II and nothing works,.... if i go through the htc the keyboard is detected, asks for a security code, does not recognise the one i put in, (although the instructions say pick one of your choice), and does not connect.
if i go through the keyboard CAB installed on the htc, still cannot connect,.... i am not exactly a 'newbie' but if someone could give a step by step direction on how to get this to work, i would be very grateful,....
thanks,
ek

sorry everyone, i used elyspar's CAB file on my htc tytn II,.... thanks for your help,....ek

found a vid on youtube very helpful,.... it's actually quite simple to connect, so maybe i need to retract, i am a newbie,....
here's the link, http://www.youtube.com/watch?v=P8HAge9yJu4
no functionality though, just basic input, good for emails / word, but limited,....
guess i have to install the driver on my kaiser somehow,....

Hi everybody, can you tell me which driver i have to install for my Niki? It's not on the list...
Thank you very much.

ekacz24 said:
everybody,
trying to connect / use my new sierra bt keyboard with my htc tytn II and nothing works,.... if i go through the htc the keyboard is detected, asks for a security code, does not recognise the one i put in, (although the instructions say pick one of your choice), and does not connect.
if i go through the keyboard CAB installed on the htc, still cannot connect,.... i am not exactly a 'newbie' but if someone could give a step by step direction on how to get this to work, i would be very grateful,....
thanks,
ek
Click to expand...
Click to collapse
I could use an Apple Alu BT KB with HTC TyTN (not II). Paired. Without any special driver. Remember to press Enter on the KB after the code. Now I have a new Touch HD and I get it paired but nothing happens clicking on the keyboard...
I will start installing drivers which I find here suggested and will report.

iGo stowaway BT keyboard and WM6
Hello all,
I originally posted this message in a Blackstone forum, but as this problem probably relates to WM6 in general I thought I would post here
I have an igo bluetooth keyboard and I am using Blackstone phone (running the usual WM6.1 proffessional. I installed the igo software and everything worked fine except that phone crashed a lot. Not so useful. I then uninstalled the software and paired the keyboard using the onboard Bluetooth keyboard drivers. All worked well for one run through and I was able to type away. However I have not got the thing to work again since, even after re-pairing the devices. Does anyone haev any thoughts about what I might be doing wrong?
Thanks.
Tom

Hello Guys, partly not to the topic hear....
I have an igo stowaway keyboard and a travel mouse and i have been using them with my fusi n560 (wm 6.0). Now I bought a Nokia 5800 mobile phone with symbian s60v3 touch. The keyboard came with multiple driver including both wm and symbian versions, but the mause came only with wm driver. Now the question is: do you happen to know how could I use my mouse with my symbian device? Sorry for asking symbian related question here....

Special Characters and the Sierra Stowaway
I have previously used the Sierra Bluetooth Keyboard and it worked flawlessly on my T-Mobile Wing running WM5... I recently tried to port the same driver suggested by ek... (PPC5) to the T-Mobile HTC Touch Pro2, WM6.1.
It works on all keys, including the function keys, but cannot produce the specialty characters on the 5th, number-row, i.e., [email protected]#$%^&*()
Everything else seems to work fine... anybody come across a fix for this?
Thanks!
JSS

I've been interested in acquiring an Apple Wireless Keyboard for my PDA too.
But from skimming other people's post, looking at what was successful on the internet (e.g. the guy on youtube with the Mio who paired with the Apple BT Keyboard), it seems that all the success stories come from people running WM5/6
Anything 6.1 and above seems to not work in general, although you have some success stories like from http://forum.xda-developers.com/showthread.php?t=486595
Has anyone successfully paired with 6.1-6.5?

jstapley said:
I have previously used the Sierra Bluetooth Keyboard and it worked flawlessly on my T-Mobile Wing running WM5... I recently tried to port the same driver suggested by ek... (PPC5) to the T-Mobile HTC Touch Pro2, WM6.1.
It works on all keys, including the function keys, but cannot produce the specialty characters on the 5th, number-row, i.e., [email protected]#$%^&*()
Everything else seems to work fine... anybody come across a fix for this?
Thanks!
JSS
Click to expand...
Click to collapse
I have similar problems with my Samsung Omnia, WM6.1 and the German Stowaway Keyboard (QWERTZ) with the driver 4.51.
Just the keys !$& are not working.
Could there be a workaround like using ASCI numbers?
I tried ALT+33 to get a "!" but had no success.
Does anybody else has some suggestions?
Thanks,
Sigi

sigi-s said:
I have similar problems with my Samsung Omnia, WM6.1 and the German Stowaway Keyboard (QWERTZ) with the driver 4.51.
Just the keys !$& are not working.
Could there be a workaround like using ASCI numbers?
I tried ALT+33 to get a "!" but had no success.
Does anybody else has some suggestions?
Thanks,
Sigi
Click to expand...
Click to collapse
I solved my problem:
I installed the English driver 4.52
(I have an English ROM and use a German Keyboard)
The driver was changed from version Ger4.51 to Eng4.52 on several places and I think they solved some Bugs.
I resetted my Omnia after the installation.
Because the problem still existed, I resetted the Omnia once again, while the Stowaway keyboard was selected in the keyboard menu.
After that reset all the characters worked like the should.
Hope that helps.