Hello everybody,
I have a simple problem, I can´t flash another Rom then the Rom from lalle. Every other Rom I try (4 or 5) is flashing well, but it hung up on the second boot-screen and then nothing appears. I can flash again, with the same result.
Can someone help me please?
THX, Timo
der_timo said:
Hello everybody,
I have a simple problem, I can´t flash another Rom then the Rom from lalle. Every other Rom I try (4 or 5) is flashing well, but it hung up on the second boot-screen and then nothing appears. I can flash again, with the same result.
Can someone help me please?
THX, Timo
Click to expand...
Click to collapse
reflash an orignal WM 5.0, install an hard spl and then try to reinstall a cooked rom.
Ervius is right. I had the same problem. Original WM5 ROM always works
Related
Hi all!
I have a big problem with my MDA Pro, so I'll apriciate all help that you can give me!
I tried to remove simlock and I flashed 0.00.00 Rom and everything went fine. But then, when I rebooted my device on boot screen I see "No GSM" and can't flash my radio rom again, it just says "Updating radio rom - please wait" and after some time it aborts flashing. Everything else is working fine, all other PDA functions, but my phone is dead... I had original T-Mobile rom instaled on my device and bootloader 1.01.
Plz help guys, don't know what to do!!
I have flashed with RUU_Diamond_HTC_RUS_1.37.411.2_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe my diamond. And now, it's reboots every time after writing TOUCH DIAMON and version numbers (radio, rom,...)
I have tried to hard reset device - but the same.
And I cann't flash it with a new rom because it doesn't sync to my pc.
Is it possible to flash it with a good rom? Or my diamond is broken at all?
Help please! it so pity to lost this device...
did you first flashed hardSPL??
htckaiseruser said:
did you first flashed hardSPL??
Click to expand...
Click to collapse
Yes. Problem is solved, I'v just entered a boot mode (power but+vol. down + reset) and flashed 1.37.456.2 wwe.
PS: Thakns to Football!
I freezed at 75% for about 30mins and then I restarted it. The bootloader screen appeared and it said "Upgrade ROM code error Please try again".
What should I do??? THX!!!!!
kelvinka said:
I freezed at 75% for about 30mins and then I restarted it. The bootloader screen appeared and it said "Upgrade ROM code error Please try again".
What should I do??? THX!!!!!
Click to expand...
Click to collapse
what rom are you trying to install
...have you followed the info from the chef to install?
usally found in there 1st & 2nd posts
AT&T DIAMOND [US 3G Rom Base 1.93.422.4]
http://forum.xda-developers.com/showthread.php?t=439859
The normal precedures of flashing rom were followed
full battery?
try and flash again...your rom you have download could be corupt
download it again if it still sticks at the same spot....good luck
how can I flash rom without getting into WINDOWS???
Just staying at the bootloader screen...
ok try this
http://forum.xda-developers.com/showthread.php?t=440050&highlight=stuck+bootloader
hope this helps
good luck
problem solved!!!!
thanks for your help!!!
hope i help in some way
all the best and have a good weekend
Liam
hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
bennylu said:
hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
Click to expand...
Click to collapse
hi dude!
For first time flashing and newbie:
Please flash HardSPL and OEM Stripped AT&T first before you can flash Custom ROMs.
HardSPL link: http://forum.xda-developers.com/attachment.php?attachmentid=37669&d=1177280888
OEM Stripped AT&T: http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Flashing method :
Withactivesync http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
For How to flashing with MicroSD,http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And Hard reset after flashing rom
good lucky !
hi!
thanks for the fast replay
ive done exactly as you said but the problem stays ..
if i flashing roms that comes with the file RUUWrapper.exe
i have no problem
is there any convertor that can convert between those types?
Mate, use the sd card method... No problems with syncing ever again...
Hello,
With the mtty method, i wanted to install a new rom. I did this a lot of times before so i know how to do it. I copied the rom to the memory and used mtty to instal it. But it keeps get stuck at "loading..." Because the mtty i dont have a rom to start up at the normal way.
When i am at the bios of the tel and connecting by usb to my computer, i also tried to install a rom from the computer, but there it keeps stuck at 0%. When i re-install hard SPL, that goes fine (but my tel. doenst want to boot).
Also i tried a other rom, but that doenst whant to install too.
Can someone help me?
Hi
same problem.
use olinex again.
AMIRHADI DAISY said:
Hi
same problem.
use olinex again.
Click to expand...
Click to collapse
Hello,
I installed olinex hard SPL again, but my tel doenst want to boot. It only shows the "HTC diamond" starting screen.
Fixed! I tried a other hard SPL