Develop Bugs

Need help ! cingular 8125 bricked :(

Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.

Have you tried flashing from the bootloader to an official rom?

thanks for reverting, i have tried that too, but of no use.

Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .

i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.

Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.

Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!

Bricked hx2750 help

After an successful rom upgrade from win 2003 se ITA to wme5 eng AKU 3.5.2 i`ve got my hx2750 dead.
The only thing that i can do is contact+itask + reset and got o Pre-BL: 1.00.02 screen. i tried original hp update/ patched update / universal bootloader/mtty and host11 without any results. hp update / patched update giveme succesful update after 2 sec then shutdown my ipaq. With mtty i can connect with my ipaq but i don`t have any prompt just flashing cursor. With universal bootloader it start and do nothing. And last host11 give me lost usb connection after 1 second. I tried to contact hp and they ask me 280$ for a motherboard change... crazy!!!
Is there any chance to remove my ipaq from trash and give it a second life??? any ideas?help?
Thanks very much
Abs.
P.s. sorry for my english

I see you posted in the thread I had going with a similar problem - unfortunately, I have no other solution than swapping with a second device - on the brighter side - if you purchase one and fix the other one, you can probabley resell one of them for around what you paid for it
Good luck!

It`s not easy to find a used device in italian.. Btw i`ve got a little update.
Now i`m able to flash wme5 original / Aku / and wm6. But i have another problem.. flash process are ok.. on first reboot my ipaq start and at 30% of startup process shutdown... i will work on it..
Abs

good luck and share your experience.

Ok, well if you're able to get it to flash - try flashing back to 1.00.00.L - should boot then. Worked for me - so give it a shot.
I had to reflash to the original rom (no boot, but able to successfully flash in bootloader) - then to 1.00.00.L (boot and hard reset) - then to 1.00.00.H (boot and hard reset) - then to 1.00.25.H (boot and hard reset) - then to WM6 (boot and hard reset) to get everything to work after mine was bricked.
Oh, and if you DO use another device - it doesn't have to be the same language as the original - just swap to the correct file/language at the appropriate time in the flash.

Can´t flash any other Rom

Hello everybody,
I have a simple problem, I can´t flash another Rom then the Rom from lalle. Every other Rom I try (4 or 5) is flashing well, but it hung up on the second boot-screen and then nothing appears. I can flash again, with the same result.
Can someone help me please?
THX, Timo

der_timo said:
Hello everybody,
I have a simple problem, I can´t flash another Rom then the Rom from lalle. Every other Rom I try (4 or 5) is flashing well, but it hung up on the second boot-screen and then nothing appears. I can flash again, with the same result.
Can someone help me please?
THX, Timo
Click to expand...
Click to collapse
reflash an orignal WM 5.0, install an hard spl and then try to reinstall a cooked rom.

Ervius is right. I had the same problem. Original WM5 ROM always works

jasjam and the file Custom_RUU.exe

hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?

bennylu said:
hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
Click to expand...
Click to collapse
hi dude!
For first time flashing and newbie:
Please flash HardSPL and OEM Stripped AT&T first before you can flash Custom ROMs.
HardSPL link: http://forum.xda-developers.com/attachment.php?attachmentid=37669&d=1177280888
OEM Stripped AT&T: http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Flashing method :
Withactivesync http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
For How to flashing with MicroSD,http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And Hard reset after flashing rom
good lucky !

hi!
thanks for the fast replay
ive done exactly as you said but the problem stays ..
if i flashing roms that comes with the file RUUWrapper.exe
i have no problem
is there any convertor that can convert between those types?

Mate, use the sd card method... No problems with syncing ever again...

rom doenst want to install

Hello,
With the mtty method, i wanted to install a new rom. I did this a lot of times before so i know how to do it. I copied the rom to the memory and used mtty to instal it. But it keeps get stuck at "loading..." Because the mtty i dont have a rom to start up at the normal way.
When i am at the bios of the tel and connecting by usb to my computer, i also tried to install a rom from the computer, but there it keeps stuck at 0%. When i re-install hard SPL, that goes fine (but my tel. doenst want to boot).
Also i tried a other rom, but that doenst whant to install too.
Can someone help me?

Hi
same problem.
use olinex again.

AMIRHADI DAISY said:
Hi
same problem.
use olinex again.
Click to expand...
Click to collapse
Hello,
I installed olinex hard SPL again, but my tel doenst want to boot. It only shows the "HTC diamond" starting screen.

Fixed! I tried a other hard SPL