---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
When I edit some MUI files (from SPV C550), for example "tshres.dll.04XX.mui" it looks ok... but not in phone.... it shows sometimes some mistakes like the one on the attachment I have uploaded.
Maybe someone knows how to fix it? It hapens only on few files but they are necessary to finish a langpack I create
I am looking forward for your help and thank you very much in advance!
Are you editing on your computer and then uploading it to the PDA (the normal way of developing apps)? If so then it has to do with your font & language pack. Your computer has probably got your languages of choice installed, and you also probably have the appropriate fonts on it as well - but are they on your PDA? If not, then that would explain the box that appears once you port it to the PDA (which basically just indicates that the font that is installed on the PDA does not have that particular character for that language). I don't know how you could overcome this, except to take your computer font and convert it/import it to the PDA. Hope that helps!
Black-wolf
The phone supports all Polish characters... this is not because of this....
It happens even when I open the original english mui file and just save it in ResHacker (or any other program).
I was searching for a way to add the Dutch language to the B&B 4.1 ROM of Tom.
I saw in the thread a lot of people where searching for this so i made a little howto
First of all i need to thank the guys from who i have gotten this here in xda (search & find):
- ctibor
- hiblopp
Well here we go:
Code:
1. Copy T9DutchLdb.dll to \Windows folder of Artemis.
4. Edit the Artemis Registry in HKEY_LOCAL_MACHINE\SOFTWARE\HTC\IntelliPad
a. Incerease by one the value of the "LibraryCount" dword (in my case from 10 to 11)
b. Created a "Library10" dword with the value of 8. (This is for the Dutch language).
Soft reset and you can use the dutch language in Phonepad!
If you want to use another language not provided you must copy the appropriate T9<language>Ldb.dll to the \Windows folder.
AND
change the Library10 value to the value for your language.
These are the languages i found in another thread:
7=Danish
8=Dutch
9=Finnish
10=Hungarian
11=Norwegian
12=Polish
13=Romanian
14=Slovak
15=Swedish
I have added the dutch language file for people who want to make the change!
Hi RikP just did your settings and it seems to work fine thanks!
Do you know also a way to get the keyboard to recognize dutch words?
(or do I have to wait till i typed them all )
Thanks for the guide!
vanderaatje said:
Hi RikP just did your settings and it seems to work fine thanks!
Do you know also a way to get the keyboard to recognize dutch words?
(or do I have to wait till i typed them all )
Click to expand...
Click to collapse
Did a quick search and found this:
http://forum.xda-developers.com/showthread.php?t=299036
Does it fix your problem?
T9
A better method would be the easy one . First you have to copy your t9 file directly in windows folder. Than select phonepad as input method (click on the little arrow beside the keyboard on the bar) and select Options... Input Method: Phone Pad. Select Options... Languages tab... Database... and select your language.
For t9 DLL's i downloaded t9languages.zip from http://forum.xda-developers.com/showthread.php?t=290007.
I added Romanian in my phone and works great.
PS: Sorry my english, hope is allright.
Hello All.
Here is the package that I used to read traditional and simple chinese in my
Touch Pro 2.
These are the best font and size that I find works the best for my TP2 using
WM6.1.
Instructions are in the attachment.
Enjoy.
http://rapidshare.com/files/274928187/TP2_Chinese.rar
thanks for sharing,do you have one for wm 6.5????
This one will also work for WM6.5
integrate into registry????
I would like to install this font also...can you explain what you meant by integrate into registry or paste an example. Sorry for my elementary question...I am still new at this. Thanks in advance for your help.
Can anyone verify if this works? Tired of seeing little squares in MSN Messenger!
OMG! Thank you so much! I've been searching for an easy way to get Chinese font on my TP2. This works great. My Chinese and Japanese MP3's are now readable. No more square "text".
Would you happen to know a solution for Korean font?
I just noticed that my date/time is now in Chinese. Is there a way to keep that in english?
I assume the cab is making the necessary fontlink and registry changes to switch the system font.
Newbie here so please bear with me if my question seems off but I've been reading here and google for the past few hours and still couldn't figure out on the installation instruction.
Here's the installation instruction from the download folder:
1. Copy wince.nls into /windows Directory.
2. Install Chinese Cab, Do Not Restart
3. Integrate the registry file
4. Restart.
I have installed SPL and copied the #1 wince.nls file into the windows directory but am now completely lost on #2 as there's no .cab file from the download folder?
About #3, how do you integrate the registry file?
Thanks in advance.
Yeap... how to integrate the registry? Btw, i can read and type chinese in notepad or sms. but, when i view something like bible or facebook application, the fonts become "square box with a question mark" inside? Any help?
Hi all. Im a vietnamese, and I always want to type Vietnamese on My excalibur. But I cant find any software to support Vietnamese keyboard on WM SP. I suddenly thought it possible to edit data file of Et9 to vietnamese???? any one can or know how to edit this file pls show to me. Thanks to all.
p/s: sorry about my english. it not fluently.
nobody know?
I know how to edit the e9 file, I just don't know how you'd get the phone to recognize the vietnamese language.
sorry, I dont know how to expland.... but pls show to me
hook your Excalibur up to your pc and navigate to your device - program files - et9. Then open the file ending in .kmap from there you can edit your Excalibur's keyboard. instructions are included in the file.
I don want edit et9 key map. I just want edit T9's library