Develop Bugs

latest o2 update

im am going to update my xda2 but haven't decided on the rom version yet
currently i am on
rom 1.60.00wwe
radio 1.10.00
protocol 1337.18
extrom 1.60.50
it is the O2 XDA2 unlocked and using an orange sim card.
i was just going to get the O2 standard update but now i am on here and am tempted by the new 2003se rom. i still have detailed reading to do b4 upgrading but the questions i haven't found answered while scan reading are.
1.does it matter what bootloader version you have? (i have read conflicting reports about 1.06, how do u find what bootloader u are running?)
2.if i upgrade to the latest O2 rom will i have any additional problems if i then upgrade to WM 2003 SE at a later date.
3.O2 told me if i do the offical upgrade my orange sim wont work in it. I presume this is Bull ****?
i see that Sin and [Krueger]Dr.Stein have produced guides on how to upgrade and zeroextreme has produced an extended rom so it shouldn't be much of a problem following their instructons.
4. has anyone tried all the different varient ? if so did u think 1 was better than the other? have these been compared in another post?
5.i believe a while back there was 1 rom that was considered the official unoffical rom is there a newer 2003 se rom like this?
my main reason for upgrading is i can't send mms messages and i just like being ahead of the game.
after much trawling the net and speaking to orange data support i need to upgrade to the latest O2 Rom. at first i thought this was just orange incompetence but i really have tried a lot of stuff now gprs works fine but mms is a no go.
im off now to continue reading thanks for any responses
bobby

Bepe's WWE WM6 on Orbit

I've read through the WWE thread and still haven't managed to find people's experiences with this ROM and their UK Orbit's.
Can people please post any issues, and more importantly if I'll brick my Orbit (as from the shop so unsure whether CID locked / unlocked) if I follow the steps in the original thread?
Thanks.

I had no luck. I'm waiting for WM6 ROM from O2 UK to get the phone working again as I can still access the bootloader.

Same for me. Followed all the steps, but still my phone bricked. Mine was CID locked, but because there were several succesful upgrades on CID locked devices I also tried it. I'm also still able to enter bootlloader, so just have to wait for retail WM6 ( have no RUU signed update to restore my device )

I moved from a Orbit with a HTC P3300 Rom (CID Unlocked) to a WM6 Bebe Rom at the first attempt.
It's so much quicker than the WM5 Rom. It's a lot more stable.
If you want me to post the steps and a Apps I've tested I'll do so tomorrow.

I couldn't get Bepe's to load with the boot loader, but the next part with the windows.nb file worked..........
Sort of, I think the bluetooth is not working properly as I can't create a port to allow me to sync with my pc. Apart from that it is working fine. (Touch wood)

doesn't seem worth the risk...
sounds to me like it isn't worth trying at the moment then! shame cause i want to get wm6 running but would rather not have a bricked device ... and the odds look high!
come on o2... where's our official rom?

I've just upgraded my O2 Orbit and it worked fine. CID unlocked it with IMEI-Check and then followed Bepe's instructions.

mmmm... fair enough but i just don't wanna shell out $20 to get a cracked rom...

If I am not mistaken is it not £20 as opposed to dollars I would pay a tenner but like you I will wait for £20

Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?

itschase said:
Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?
Click to expand...
Click to collapse
probably, they will require you to give this to prove you have a HTC branded device. TBH they shoudl provide a ROMforAll no matter what provider you have you should be able to upgrade to a clean manufacture rom.

for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.

phsnake said:
for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.
Click to expand...
Click to collapse
Do you think the same would apply if you Hex edited ARTE10000 to ARTE2000? Sily question, I know, but is that the only level of security that actually looks for model ID?

in o2 ger image its already ARTE***** so u dont need to change anything (it means it shoul work for arte100,110,1000,200 models maybe 300 as well - htc love) But this is looking only for ModelID, in ROmUpdate Util it checks somehow for ModelVendor/Operator - addr:x0003BA6C - password BsaD5SeoA

I also "BRICKED" my Orbit. I am also the impatient type. Why wait for O2 to release a ROM image? I have spoken with O2 directly. My friend even works for their technical division. As far as I have been able to find out, from friends and his friends at O2, there is NO O2-UK WM6 in the pipeline at the moment. Not enough users apparently. When I found out this I put my Orbit into O2 shop for repair. It was flashed under warranty as a software fault. I have since CID-unlocked it and flashed to WM6.
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.

Shand359 said:
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.
Click to expand...
Click to collapse
My experience: O2 Orbit bought in CZ. My way was: CID unlock -> try-and-brick (...) -> German original O2 WM6 ROM (with bootloader) -> Arte WM6 from bepe.
I am very happy now (extremly stable!) and at this moment I do not plan even upgrade to a new ROM.
Btw solved the issue with localization (keyboard only - Resco works perfectly) and external keyboard support for my beloved iGo Sierra bluetooth keyboard: AE Keyboard mapping SW solved my needs

MY experiences
Being a corporate O2 customer, when I bricked my Orbit they sent me a new one and said I could do what I wanted with the old one.. it's still a brick, having tried every suggestion on this forum!!!
MY new one, however, is running Bepe's WM6, having run the USPL first.
I tried Black&Blue, but found it drained the battery too quickly, and I reall ydon't need all the extras it comes with. I've got Bepe's WM6 running brillianlty - all I add is a cracked version of TomTom 6.02, which runs perfectly, BatteryStatus purely for a power display, no overclocking needed, and TodayAgenda for improved calendar on Today.
I use push mail to connect to my office exchange server, and have all my personal mail ending up at fastmail.net, where I connect to using IMAP - deleting from the phone deletes properly on the IMAP server now, unlike on WM5, so you really can have a synchronised mailbox usin IMAP and a free account at Fastmail.net...
I also have JetwareMobile installed to enable me to use my Siemens HKW600 Car kit (£40 on ebay, superb!), and I have some Sony DR-BT30Q bluetooth headphones which work perfectly...

I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!

jamin100 said:
I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!
Click to expand...
Click to collapse
Yes, but that doesn't work if you've already bricked your Orbit

Does anyone happen to have a WM5 ROM to restore to if the WM6 goes horribly tits up - I'm not overly looking forward to the idea of not having the pride of the mobile fleet working... the humiliation!

D810 WM6 Upgrade on P3600?

Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks

hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!

No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!

I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.

Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...

Thanks for the replies! Anyone else with a positive experience?

I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.

thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?

Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...

For those who successfully upgraded their P3600 to WM6, what technique did you use?

I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.

PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.

Thanks Thomas,
That's great information!

generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....

I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.

if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.

I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.

WM6: Problem with recieving incoming calls

Since I installed WM6 I can´t recieve incoming calls. The phone lights up but nothing more, and when I click on the reception or phone symbol when it lights up it says "no service" (translated from Swedish).
It was also some problems with Active Sync 4.5 since I upgraded, but those problems might just be because I needed to reinstall it.
Does anybody please know how to fix this, otherwise tomorrow it will go to the repair-shop and I will lose 12 days and the order in my life. : (
The sim-card works on another phone and it worked with WM5, and I have tried hard reset and a reinstall of WM6, but the problem persists.
/Danne

Hi,
Did you try to install an offoicial version of WM6 or one of the cooked ones of this board? If the latter did you take all the necessary precautions first eg installing an upgraded bootloader, etc?
If you have not you may have bricked your phone.
Give us a bit more detail so we can see how we can help.
Cheers
WB

hello
I had the same problem when I upgrade to official WM6 HTC rom, the phone don't ring and I loose the network.
I solve the problem with flashing the radio rom with older version.

I put wm6 on my phone the first day I got it. so I don't really know if this was a problem b4 with wm5.
mine only seems to ring my end after about 8 rings from the dialer so I have to get it within 2 rings b4 voice mail kicks in. Ypu think the if I update the radio as well will that help me?
ps. sorry for hi-jacking your topic seemed along the same line.

the same problem with Bouygues telecom!
Hi guys,
vinzcoyote can you tell me which radio version you put? i'm having the same problem with Bouygues telecom after updrading to WM6
thanks for the help.
C. J.

are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.

CrunchyGremlin said:
are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.
Click to expand...
Click to collapse
Sorry but i'm new to this: whats the "cnguar provisioning cab "?
thanks
CJ

Hi everybody,
Sorry it took a while to answer (sleeping time).
I installed the official version from HTC Europe and it it only the incoming calls that doesn´t work, I can call other people.
THE SOLUTIONS
Two solutions seems to have been offered (below) but I (as Curious Jack) are new to this so could you please elaborate of give a link where I can read more?
Vinzcoyote "I solve the problem with flashing the radio rom with older version"
CrunchyGremlin: cnguar provisioning cab
Thanks so far.
//D

Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps

luckydip said:
Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps
Click to expand...
Click to collapse
Thanks!
Two concrete solutions.
One last question: I use a Swedish OS - do the radio roms that is under: "Extracted Radio ROMs for your Hermes" work for me? Or only Anglosaxian PDA:s?
/Dan

similar problem discussed here:
http://forum.xda-developers.com/showthread.php?p=1442269#post1442269
in fact Palm Treo 750 (HTC Cheetah) and Hermes are based on the same radio module.
latest Palm Treo WM6 Radio version: 1.47 (Qualcom)
What that Palm utility does is simply downgrading radio to earlier version. This might work for Hermes in bootloader mode as well.
My point is: no need to install hard sspl if one can downgrade to earlier version of radio with _official_ radio downgrade tool.
I will try later and report back.
update: Palm Radio downgrade tool picked up that device is incompatible. no luck so far.

Seems problem is with Bouygues Telecom
Hi Guys,
Got the exact same problem with Bouygues Telecom. I put a Orange Sim card and it is working so I assume the issue comes from Bouygues Telecom.
So that to check, are the french guys all on Bouygues Telecom or are you using other Telco operators?
Frederic

SOLVED : WM6 & HTC Tytn & Bouygues Telecom now working
Guys,
to make it work, you need to flash ROM Radio 1.38 on top of Windows Mobile 6.
ROM Radio 1.38 can be finded at http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms

what version did you use? There are few of them listed on that page:
1.38.00.01
1.38.00.10
1.38.30.10

Upgrading to the Official WM6 ROM, but have questions

When I got my replacement AT&T 8525, it came with the AT&T WM5 ROM. I decided to downgrade to the Cingular WM5 version since I didn't like the AT&T one. I've been skeptical about upgrading to the official WM6 release, and I figured that since I have some time tonight that I would. However, I do have a couple of questions about how this will work since I had to install a different bootloader in order to make the change back to the Cingular WM5 version possible.
Currently my settings are:
ROM version: 1.34.502.1
ROM date: 09/21/06
Radio version: 1.40.30.00
HardSPLv7
My question are, do I need to modify my radio version before I upgrade? Also, should I modify my bootloader before I upgrade to the official WM6? Thanks.

Firstly good job on flashing HardSPL.
your radio doesnt need to be changed at all, but if you want to take a peek at my tests here that might help you choose an appropriate radio version.
For WM6 DEFINATLY go for it, the updated stacks/drivers/kernel are definatly faster than the WM5 versions.
Give the pandora naked 7 ROM a shot........it will FLY.
Your settings can be restored for AT&T using the HTC network wizard (easily found with a search).......and make sure you backup all your contacts etc... using PIMBackup (in the development forum).

I keep getting an error 264 connection error saying that the update utility cannot connect to my phone. I've followed all the steps. I'm not sure what I'm doing wrong. The only thing that sparks my mind that I don't remember occuring before is that when I plug my phone in via USB ActiveSync automatically begins, so I wasn't sure if I needed to disable that function or not since the instructions mentioned something about being sure that happens before installing the new ROM.

Any help? I'm still stuck here.

I just did mine (I am a brand new to all this) and I followed these steps word for word in this thread, adn man what a difference .
read these all the way through.
http://www.pocketpcaddict.com/forum...-unlocking-cid-unlocking-wm6-your-8525-a.html
http://www.mrvanx.org/cms/index.php?option=com_content&task=category&sectionid=6&id=13&Itemid=26
Nates good people and willing to help although he is a caffeine addict
and after you upgrade the rom do this, but read it all before doing so
HTC plug in , great look for the 8525
http://www.pocketpcaddict.com/forum...ome-plug.html?highlight=HTC+Home+plug-in+v1.0

Oh i forgot, the HTC att WM6 included the radio upgrade to the 1.48. which works great.